Zanussi Zsf 4126 Users Manual

: Zanussi Zanussi-Zsf-4126-Users-Manual-205733 zanussi-zsf-4126-users-manual-205733 zanussi pdf

Open the PDF directly: View PDF .
Page Count: 24

DISHWASHER

ZSF 4126

Instruction Book

152956 87/0 UK

Safety instructions 3

Disposal 3

Economical and ecological dishwashing 3

Description of the appliance 4

The control panel 5

Prior to using for the first time 6

The water softener 6

Filling with dishwasher salt 7

Rinse aid 7

In daily use 8

Loading cutlery and dishes 8

The lower basket 8

The cutlery basket 8

The upper basket 9

Adjusting the height of the upper basket 9

Use of detergent 10

Different kinds of detergent 10

Washing programmes 12

Starting a washing programme 13

Maintenance and cleaning 14

Cleaning the filters 14

Prolonged periods of non-operation 14

Frost precautions 14

Moving the machine 14

Something not working 15

Service and Spare Parts 17

Customer Care Department 17

Guarantee Conditions 18

Installation instructions 19

Fitting under a counter 19

Levelling 19

Water supply connections 19

Water outlet hose connection 20

Electrical connection 20

Hints for test centres 21

Contents

2

Dimensions Width 45 cm

Height with worktop 85 cm

Height without worktop 82 cm

Max depth 63 cm

Max depth with open door 118.5 cm

Electrical connection: Information on the electrical connection is given on the rating plate on the

Voltage inner edge of the dishwasher’s door.

Overall power

Fuse

Water supply pressure Minimum 50 kPa (0.5 bar)

Maximum 800 kPa (8 bar)

Capacity 9 place settings

Technical specifications

This appliance complies with the following E.E.C. Directives:

- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Installation

●Check your dishwasher for any transport damage. Never

connect a damaged machine. If your dishwasher is

damaged, you should contact your supplier.

●For safety reasons it is dangerous to alter the specifications

or attempt to modify this product in any way.

●Any electrical and plumbing work required to install this

appliance should be carried out by a qualified and

competent person.

●Care must be taken to ensure that the appliance does not

stand on the electrical supply cable.

●The sides of the dishwasher must never be drilled to

prevent damage to hydraulic components.

Child safety

●This appliance is designed to be operated by adults.

●Children should not be allowed to tamper with the controls

or play with the product.

●Packaging parts may be dangerous for children, who could

even be suffocated! You should therefore keep all

packaging well away from children.

●The water in your dishwasher is not for drinking. Detergent

residues may still be present in your machine. Keep

children well away from your dishwasher when the door is

open.

●Keep all detergents in a safe place out of children's reach.

Your dishwasher in day-to-day use

●Items that are contaminated by petrol, paint, steel or iron

debris, corrosive, acidic or alkaline chemicals must not be

washed in this dishwasher.

●Under no circumstances should you open the door whilst

the appliance is in operation, especially during the washing

phase, hot water may escape. However, if the door is

opened, a safety device ensures that the machine stops.

●Only use products (detergent, salt and rinse aid) specifically

designed for use in dishwashers.

●Long bladed knives stored in an upright position are a

potential hazard.

●Long and/or sharp items of cutlery such as carving knives

must be positioned horizontally in the upper basket.

●Ensure that the door of the dishwasher is always closed

when it is not being loaded or unloaded. In this way you will

avoid anybody tripping over the open door and hurting

themselves.

●When finishing loading or unloading close the door, as an

open door can be a hazard.

●Do not sit or stand on the open door.

●Isolate the appliance from the power supply and turn off the

water supply after use.

●This product should be serviced by an authorised service

engineer, and only genuine spare parts should be used.

●Under no circumstances should you attempt to repair the

machine yourself. Repairs carried out by inexperienced

persons may cause injury or serious malfunctioning.

Contact your local Service Force Centre. Always insist on

genuine spare parts.

Disposal

Dispose of the dishwasher packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with standard international

abbreviations:

>PE< for polyethylene, e.g. sheet wrapping material.

>PS< for polystyrene, e.g. padding material (always CFC-

free).

>POM< for polyoxymethylene, e.g. plastic clips.

Cardboard packaging is manufactured from recycled paper

and should be deposited in the waste paper collection for

recycling.

As and when you cease to use your dishwasher and withdraw

it from service, your should render it unserviceable before

having it disposed of.

Warning! Children at play could lock themselves in your

dishwasher or otherwise endanger their lives. Therefore cut off

the power supply cable and make the door closing device

unusable to prevent children from being trapped inside.

For the disposing of the appliance please take it to a recycling

centre or to your dealer who may, for a small contribution to

the costs, dispose it for you.

The symbol on the product or on its packaging indicates

that this product may not be treated as household waste.

Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment

and human health, which could otherwise be caused by

inappropriate waste handling of this product.

For more detailed information about recycling of this product,

please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

Economical and

ecological dishwashing

●Ensure that the water softener is correctly adjusted.

●Do not pre-wash under running water.

●Select the wash programme to suit the nature and degree of

the soiling on the dishes.

●Do not use more detergent, dishwasher salt and rinse aid

than is recommended in these operating instructions and by

the manufacturer of the respective product.

Safety instructions

3

It is most important that this instruction book should be retained with the appliance for future reference. Should the

appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that

the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the

relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the

appliance.

If you are unsure about any aspect of the information in this book, please contact our customer care department on 08705

950 950

Description of the appliance

4

1. Upper basket stop

2. Water hardness dial

3. Salt container

4. Detergent dispenser

5. Control panel

6. Rating plate

7. Rinse aid dispenser

8. Filters

9. Lower spray arm

10. Upper spray arm

11. Upper basket

12. Worktop

IN154

Programme selector dial and On/Off indicator

light: the selection of a washing programme occurs by

turning the programme selector dial clockwise or anticlockwise,

until the desired washing programme (see "Washing

programmes" chart) corresponds with the programme selection

marker placed on the dial (position On). The On/Off indicator

light illuminates.

The indicator lights of the phases foreseen for the selected

programme start flashing.

To switch off the machine turn the programme selector dial

until the marker on the dial corresponds with the On/Off

indicator light (position Off). The On/Off indicator light turns off.

With the programme selector dial it is also possible to set the

level of the water softener (see specific paragraph).

"Start/Cancel" button: once a washing programme has

been set, press this button to start the programme.

The Start/Cancel indicator light (placed above the button)

illuminates.

With this button it is possible to cancel a washing programme

in progress.

Indicator lights: have the following meanings:

As soon as you select a washing programme, the phase

indicator lights for that programme will start flashing.

As the programme starts, the phase indicator lights turn off

except for the indicator light of the phase in progress which will

remain lit with a static light.

The control panel

5

Programme selector dial Indicator lights

Door handle

On/Off indicator light

Start/Cancel indicator light

Programme selection marker

Programme guide

Start/Cancel button

Wash illuminates when the washing and rinsing

phases are running.

Dry illuminates when the drying phase is

running.

End illuminates when the washing programme

has ended.

It also has added functions of visual

signalling as:

- the setting of the water softener,

- intervention of an alarm due to the

malfunction of the machine.

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply

with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill

with dishwasher salt

5. Fill the rinse aid dispenser

The water softener

The dishwasher is equipped with a water softener designed to

remove minerals and salts from the water supply, which would

have a detrimental or adverse effect on the operation of the

appliance.

The higher the content of these minerals and salts, the harder

your water is.

Water hardness is measured in equivalent scales, Clarke

degrees, French degrees (TH°) and mmol/l (millimol per litre -

international unit for the hardness of water).

The softener should be adjusted according to the hardness of

the water in your area. Your local Water Authority can advise

you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using

the water hardness dial and electronically, using the

programme selector dial and the Start/Cancel button.

a) Setting manually

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4. Replace the lower basket.

The dishwasher is factory set

at position 2.

b) Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1. Keep the Start/Cancel button pressed and turn the

programme selector dial clockwise until the programme

selection marker corresponds with the first washing

programme.

The On/Off and Start/Cancel indicator lights start to flash

indicating that you have activated the water softener setting

function.

At the same time, the End indicator light starts flashing.

The current level is indicated by the number of flashes of

the End indicator light and a pause of about 5 seconds (see

chart).

Example: 5 flashes + pause + 5 flashes etc...= level 5

2. To change the level, press the Start/Cancel button.

Each time this button is pressed the level changes. (For the

selection of the new level, see chart).

Examples:

If current level is 5, by pressing the Start/Cancel button

once, level 6 is selected.

If current level is 10, by pressing the Start/Cancel button

once, level 1 is selected.

The End indicator light remains off for about 5 seconds and

then starts flashing indicating the new set made.

3. To memorise the operation, switch off the machine by

returning the programme selector dial to the Off position,

that is the programme selection marker corresponds with

the On/Off indicator light.

Otherwise wait for about 60 seconds, after which the

dishwasher will automatically return to setting mode.

Prior to using for the first time

6

AA07

Clarke °TH mmol/l manually electronically

64 - 88

53 - 63

46 - 52

36 - 45

28 - 35

23 - 27

18 - 22

13 - 17

5 - 12

< 5

9,0 - 12,5

7,6- 8,9

6,5 - 7,5

5,1 - 6,4

4,0 - 5,0

3,3 - 3,9

2,6 - 3,2

1,9 - 2,5

0,7 - 1,8

< 0,7

Range

IV

IV

IV

IV

IV

III

III

II

I/II

I

91 - 125

76 - 90

65 - 75

51 - 64

40 - 50

33 - 39

26 - 32

19 - 25

7 - 18

< 7

2

2

2

2

2

2

1

1

1

1

level 10

level 9

level 8

level 7

level 6

level 5

level 4

level 3

level 2

level 1

yes

yes

yes

yes

yes

yes

yes

yes

yes

no

10

9

8

7

6

5

4

3

2

1

Water hardness Adjustment of the

water hardness setting Number of

flashes of the

"End" indicator light

Use

of

salt

Filling with dishwasher salt

Only use salt specifically designed for use in

dishwashers.

All other types of salt not specifically designed for use in

a dishwasher, especially table salt, will damage the water

softener.

Only fill with salt just before starting one of the complete

washing programmes.

This will prevent any grains of salt or salty water, which

may have been spilt, remaining on the bottom of the

machine for any period of time, which may cause

corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the

cap of the salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (this is necessary

only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the

container is full.

4. Replace the cap making

sure that there is no trace

of salt on the screw

thread or on the gasket.

5. Replace on the cap tightly

turning it clockwise until it

stops with a click.

The salt container will require topping up periodically.

The salt cap has a refill

indicator window in the centre.

Agreen float is clearly visible

when there is salt inside the

container and almost

disappears when the salt has

finished reminding you to add

salt.

Do not worry if water over flows from the unit when filling with

salt, this is quite normal.

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring

thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about

110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing

programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by pressing the release button (A).

2. Add the rinse aid until the container is completely full. The

maximum level for filling is indicated by "max".

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an

absorbent cloth to avoid excess foaming during the next

wash.

Only use branded rinse aid for dishwashers. Never fill the

rinse aid dispenser with any other substances (e.g.

dishwasher cleaning agent, liquid detergent). This would

damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the

dose of rinse aid by means of the 6 position selector (position

1 minimum dosage, position 6 maximum dosage).

The dose is factory set in

position 4.

Increase the dose if there are

drops of water or lime spots

on the dishes after washing.

Reduce it if there are sticky

whitish streaks on the dishes

or a bluish film on glassware

or knife blades.

Top up the rinse aid when the

indicator (B) becomes clear.

7

SALE

ZOUT

SALT

SALZ

SEL

SR14

SR22

BR10 BR16

BR12

BR11

●Check if it’s necessary to refill with dishwasher salt or rinse

aid

●Load cutlery and dishes into the dishwasher.

●Fill with dishwasher detergent .

●Select a wash programme suitable for the cutlery and

dishes.

●Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can

absorb water may not be washed in the dishwasher.

●Before loading the dishes, you should:

- Remove large left-overs.

- Soften remnants of burnt food in pans

●When loading the dishes and cutlery, please note:

- Dishes and cutlery must not impede the rotation of the

spray arms .

- Load hollow items such as cups, glasses, pans, etc. with

the opening downwards so that water cannot collect in the

container or a deep base.

- Dishes and items of cutlery must not lie inside one

another, or cover each other.

- To avoid damage to glasses, they must not touch.

- Lay small objects in the cutlery basket.

●Plastic items and pans with teflon have a tendency to

retain water drops; these items will not dry as well as

porcelain and steel items.

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,

salad bowls, cutlery etc.

Serving dishes and large lids should be arranged around the

edge of the basket, ensuring that the spray arms can turn

freely.

The cutlery basket

Long bladed knives stored in an upright position are a

potential hazard.

Long and/or sharp items of cutlery such as carving knives

must be positioned horizontally in the upper basket.

Take care when loading or unloading sharp items such as

knives.

Forks and spoons should be placed in the removable cutlery

basket with the handles facing downwards and the knives with

their handles facing upwards.

If the handles protrude from the bottom of the basket,

obstructing the lower spray arm, load the cutlery with the

handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking

together.

For best results we

recommend you to use the

cutlery grid provided (if the

size and dimensions of the

cutlery allow it).

In daily use

8

For washing in the dishwasher the following cutlery/dishes

are of limited suitability:

- Only wash stoneware in the dishwasher if it is specifically

marked as being dishwasher-safe by the manufacturer.

- Glazed patterns may fade if machine washed frequently

- Silver and aluminium parts have a tendency to discolour

during washing. Residues, e.g. egg white, egg yolk and

mustard often cause discolouring and staining on silver.

Therefore always clean left-overs from silver immediately, if

it is not to be washed straight after use.

- Some types of glass can become dull after a large number

of washes

are not suitable:

- Cutlery with wooden, horn, china or

mother-of-pearl handles

- Plastic items that are not heat resistant

- Older cutlery with glued parts that is not

temperature resistant

- Bonded cutlery items or dishes

- Pewter or copper items

- Lead crystal glass

- Steel items subject to rusting

- Wooden platters

- Items made from synthetic fibres

UI61 UI24

UI76

The upper basket

The upper basket is designed for plates (dessert plates,

saucers, dinner plates of up to 24 cm in diameter), salad

bowls, cups and glasses.

Arrange items on and

underneath the cup racks so

that water can reach all

surfaces.

Glasses with long stems can

be placed upside down in the

cup racks.

For taller items, the cup

racks can be folded upwards.

Light items (plastic bowls

etc.) must be loaded in the

upper basket and arranged

so they do not move.

Before closing the door,

ensure that the spray arms

can rotate freely.

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower

basket after moving the upper basket to the higher position.

To move to the higher position proceed as

follows:

1. Move the front runner stops (A) of the upper basket

outwards and slide the basket out.

2. Refit the basket in the higher position and replace the stops

(A) in their original position.

When the basket is in the

higher position you will not

be able to use the cup

rack(s).

After loading your machine always close the door, as an

open door can be a hazard.

9

With upper basket raised 20 cm 31 cm

With upper basket lowered 24 cm 27 cm

Maximum height of the dishes in

upper basket lower basket

RC01

Use of detergent

Only use detergents specifically designed for use in

dishwashers.

We recommend the use of Finish detergents.

Using no more than the correct amount of detergent

contributes to reducing pollution.

Please observe the manufacturer’s dosing and storage

recommendations as stated on the detergent packaging.

Fill with detergent

1. If the lid is closed: press release button (1). The lid springs

open.

2. Fill the detergent dispenser (2) with detergent.

The marking indicates the dosing levels:

20 = approximately 20 g of detergent

30 = approximately 30 g of detergent

3. All programmes with prewash need an additional detergent

dose (5/10 g) that must be placed in the prewash detergent

chamber (3). This detergent will take effect during the

prewash phase.

4. Close the lid and press until it locks in place.

10

DE19 DE22

BRILLIANT

FOR A

SHINE

RINSE

CONCENTRATED DISHWASHER DETERGENT

ACTION

NEW

DOUBLE

LIQUID GEL

POWDER

EASY

POURING

PACK

For best results we recommend the use of Finish detergents, rinse aid and salt.

DE15

Detergent tablets

Detergent tablets of different brands dissolve at different

speeds. For this reason some detergent tablets cannot

dissolve and develop their full cleaning power during short

programmes. Therefore please use long programmes when

using detergent tablets, to ensure the complete removal of

detergent residuals.

Do not place the tablets in the tub or in the cutlery basket

as this will result in poorer wash results. The tablets

should be placed in the detergent dispenser.

Concentrated detergent

Based on their chemical composition, dishwasher detergents

can be split into two basic types:

- conventional, alkaline detergents with caustic components.

- low alkaline concentrated detergents with natural enzymes.

The use of 50°C washing programmes in conjunction with

concentrated detergents reduces pollution and is good for your

dishes; these wash programmes are specially matched to the

dirt-dissolving properties of the enzymes in the concentrated

detergent. For this reason 50°C wash programmes in which

concentrated detergents are used can achieve the same

results that can otherwise only be achieved using 65°C

programmes.

Combi detergents

If you are using dishwasher detergent that includes the rinse

aid function, this must be placed in the detergent compartment.

In this case the rinse aid dispenser must be empty, in order to

avoid a double dosage.

If in the rinse aid dispenser there is still rinse aid you must wait

until it has finished before using these kind of detergents.

Use of "3 in 1" combi detergents

General advice

These products are detergents with integrated and combined

detergent/rinse-aid and salt functions.

1. Before using these products you should first check that

the water hardness in your supply is compatible with

the use of these products as per the detergent

manufacturers (on the product packaging).

2. These products should be strictly used according to the

detergent manufacturers instructions.

3. If you encounter problems when using 3 in 1 products for

the first time then please contact the detergent

manufacturers care line (the telephone number is given on

the product packaging).

Special advice

When using combination 3 in 1 products select the lowest

possible setting for water hardness.

If you decide to turn back to the use of the standard detergent

system we advise that you:

●Refill both the salt container and rinse aid dispenser.

●Switch the water hardness setting to the highest possible

position and run from 1 to 3 normal washing programmes

without a load.

●Readjust the water hardness setting again according to the

hardness of the water in your area.

Different kinds of detergent

11

NOTE: When using dishwasher detergents with

integrated and combined detergent/rinse-aid functions,

the refilling of the rinse aid dispenser is no longer

necessary.

Special salt for dishwasher must still be used.

In this case the rinse aid indicator light will always remain

illuminated when the machine is switched on (not all

dishwasher models are foreseen with rinse aid indicator

light).

NOTE: When using dishwasher detergents with

integrated and combined detergent/rinse-aid/salt

functions, the refilling of the salt container and the rinse

aid dispenser are no longer necessary.

In this case the salt and the rinse aid indicator lights will

always remain illuminated when the machine is switched on

(not all dishwasher models are foreseen with salt and rinse

aid indicator lights).

Washing programmes

12

(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).

This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast

and dinner crockery and cutlery.

(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with

enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be

obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of

washing and drying have been extended.

(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by

the variations of the power supply.

Position

of the

programme

selector dial

A

Degree of soil

and

type of load

Heavy soil.

Crockery, cutlery,

pots and pans

Normal soil.

Crockery and

cutlery

Programme

Intensive 70°

Normal 65°

Cycle description (3) Consumption values

Hot prewash

Main wash up to 70°C

2 warm rinses

1 hot rinse

Drying

Cold prewash

Main wash up to 65°C

2 warm rinses

1 hot rinse

Drying

Programme

duration

(in minutes)

Energy

consumption

(in kWh)

Water

consumption

(in litres)

75 - 85 1,5 - 1,7 18 - 20

105 - 115 1,3 - 1,5 20 - 25

Any.

Partial load (to be

completed later in

the day).

Rinse Hold

1 cold rinse (to avoid food

scraps from sticking

together). This programme

does not require the use of

detergent.

12 < 0,1 4

B

Normal soil.

Crockery and

cutlery

(2)

Economy 50°

Cold prewash

Main wash up to 50°C

1 cold rinse

1 hot rinse

Drying

118 - 128 0,75 - 0,8 13 - 15

D

Fresh soil.

Crockery and

cutlery

(1)

Quick Wash

60°

Main wash up to 60°C

1 hot rinse 25 - 35 0,7 - 0,8 8

C

E

1. Check that the baskets have been

loaded correctly and that the spray

arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Setting and starting the programme

Turn the programme selector dial until the marker on the

dial corresponds with the desired programme (see

"Washing programmes" chart).

The On/Off indicator light illuminates.

The indicator lights of the phases foreseen for the

programme start flashing.

Press the Start/Cancel button, the programme starts

automatically and the Start/Cancel indicator light

illuminates.

The indicator light of the phase in progress is illuminated.

NOTE: during the running of the programme, it is not

possible to change the selection made by positioning the

programme selector dial in correspondence of another

programme. If you want to change the running washing

programme you must cancel the selection made (see "To

cancel a washing programme in progress").

NOTE: the washing programme will begin only after

having pressed the Start/Cancel button. Until that moment

it is possible to modify the selection made.

5. To interrupt or cancel a washing

programme in progress

Interrupt or cancel a washing programme in progress

ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

To interrupt a washing programme in

progress

Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the point at

which it was interrupted.

To cancel a washing programme in progress

Press the Start/Cancel button for about 5 seconds.

The Start/Cancel indicator light turns off and the phase

indicator lights are flashing.

The running programme has been cancelled and it is now

possible to set a new washing programme.

If a new washing programme is to be selected, check that

there is detergent in the detergent dispenser.

6. End of the washing programme

The dishwasher will stop automatically.

The illumination of the End indicator light indicates that the

programme has ended.

Switch off the dishwasher by returning the programme

selector dial to the Off position.

The On/Off indicator light turns off.

Open the dishwasher’s door, leave it ajar and wait a few

minutes before removing the dishes; in this way they will

be cooler and the drying will be improved.

7. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should

therefore be allowed to cool down before removing from

the appliance.

Empty the lower basket first and then the upper one; this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

Water may appear on the sides and the door of the

dishwasher as the stainless steel will eventually become

cooler than the dishes.

When the washing programme has finished, it is

recommended that the dishwasher is unplugged and the

water tap turned off.

Starting a washing programme

13

Clean the external surfaces of the machine and control panel

with a damp soft cloth. If necessary use only neutral

detergents. Never use abrasive products, scouring pads or

solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse

aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every

3 months or run a 65°C wash programme without dishes using

detergent.

Regular use of Finish Dishwasher Cleaner cleans

inaccessible parts, eliminates unpleasant food odours and

helps prevent the build-up of limescale.

Cleaning the filters

The filters must be checked and cleaned from time to time.

Dirty filters will degrade the washing result.

1. Open the door, remove the lower basket.

2. The dishwasher filter system comprises a coarse filter (A),

a microfilter (B) and a flat filter (C).

Unlock the filter system using the handle on the microfilter,

and remove.

3. Turn the handle about 1/4a turn anticlockwise and remove.

4. Take hold of the coarse filter (A) by the handle with the hole

and remove from the microfilter (B).

5. Clean all filters thoroughly under running water.

6. Remove the flat filter (C) from the base of the washing

compartment and clean both faces thoroughly.

7. Put the flat filter (C) back in the base of the washing

compartment.

8. Place the coarse filter (A) in the microfilter (B) and

press together.

9. Put the filter combination in place and lock by turning the

handle clockwise to the stop. During this process ensure

that the flat filter does not protrude above the base of the

washing compartment.

Attention!

Under no circumstances may the dishwasher be used without

filters.

Incorrect repositioning and fitting of the filters will produce

poor washing results.

NEVER try to remove the

upper spray arm.

If residues of soil have

clogged the holes in the

upper spray arm, remove

them with a cocktail stick.

Prolonged periods of non-operation

If you are not using the machine for any period of time you are

advised to:

1. Unplug the appliance and then turn off the water.

2. Leave the door ajar to prevent the formation of any

unpleasant smells.

3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature

is below 0°C. If this is unavoidable, empty the machine, close

the appliance door, disconnect the water inlet pipe and empty

it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

Maintenance and cleaning

14

MA40

MA39

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions

given here, without calling out an engineer.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will

be made, even if the appliance is in guarantee.

Something not working

15

...a flashing fault code appears

The dishwasher will not start or stops during operation.

The intervention of an alarm is indicated by:

- continuous flashing of the Start/Cancel indicator light,

- a combination of flashing and pauses of the End indicator light (as described in the chart).

Open the door and carry out the following suggested corrective actions.

Once these checks have been carried out; close the door and press the Start/Cancel button. The programme will continue from the

point at which it was interrupted. If the fault code reappears contact your local Service Force Centre.

For other combinations of fault codes not described in the above chart, please contact your local Service Force Centre.

...there are problems when operating the dishwasher

The programme does not start

There is a whistling noise during

washing

Malfunction Possible cause Solutions

The dishwasher door has not been properly

closed.

The main plug is not plugged in.

The fuse has blown in the household fuse box.

Close the door.

Insert the mains plug.

Replace the fuse.

Use a different brand of detergent.The whistling is not a cause for concern.

- continuous flashing of the

"Start/Cancel" indicator light

- 1 flash of the "End" indicator

light

The machine does not fill with

water.

- continuous flashing of the

"Start/Cancel" indicator light

- 2 flashes of the "End" indicator

light

The dishwasher will not drain.

- continuous flashing of the

"Start/Cancel" indicator light

- 3 flashes of the "End" indicator

light

Fault code / malfunction Possible cause Solutions

The water tap is blocked or furred with

limescale.

The water tap is turned off.

The filter (where present) in the threaded hose

fitting at the water inlet valve is blocked.

The water inlet hose has not been correctly laid

or it is bent or squashed.

Clean the water tap.

Turn the water tap on.

Clean the filter in the threaded hose

fitting.

Check the water inlet hose connection.

The sink spigot is blocked. Clean out the sink spigot.

The water drain hose has not been correctly laid

or it is bent or squashed. Check the water drain hose connection.

Anti-flood device has activated. Close the water tap and contact your

local Service Force Centre.

...the wash results are not satisfactory

The dishes are not clean

●The wrong washing programme has been selected.

●The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

●The spray arms do not rotate freely due to wrong arrangement of the load.

●The filters in the base of the washing compartment are dirty or incorrectly positioned.

●Too little or no detergent has been used.

●Where there are limescale deposits on the dishes; the salt container is empty or the wrong level of the water softener has been

selected.

●The drain hose connection is not correct.

●The salt container cap is not properly closed.

The dishes are wet and dull

●Rinse aid was not used.

●The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

●Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●Increase rinse aid dosing.

●The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

If after all these checks, the problem persists, contact your

local Service Force Centre, quoting the model (Mod.), product

number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on

the side of the dishwasher door (see picture).

So that you always have these numbers at hand, we

recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . .

PNC : . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . .

This product should be serviced by an authorised service

engineer, and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the

machine yourself.

Repairs carried out by inexperienced persons may cause injury

or serious malfunctioning. Contact your local Service Force

Centre.

Always insist on genuine spare parts.

16

RA08

In the event of your appliance requiring service, or if you wish

to purchase spare parts please contact your local Service

Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the Service

Force Centre covering your post code area.

For the address of your local Service Force Centre and further

information about Service Force, please visit the website at

www.serviceforce.co.uk

Before calling out an engineer, please ensure you read the

details under the heading "Something not working".

When you contact the Service Force Centre you will need to

give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance (found on the

rating plate)

5. The purchase date

Please note that a valid purchase receipt or guarantee

documentation is required for in-guarantee service calls.

Customer Care

Department

For general enquiries concerning your Zanussi-Electrolux

appliance or for further information on Zanussi-Electrolux

products please contact our Customer Care Department by

letter or telephone at the address below or visit our website at

www.zanussi-electrolux.co.uk

Customer Care Department

Zanussi-Electrolux

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel: 08705 727727 (*)

*calls to this number may be recorded for training purposes

17

Service and Spare Parts

Standard Guarantee Conditions

We, Zanussi-Electrolux, undertake that if within 12 months of

the date of purchase this ZANUSSI-ELECTROLUX appliance

or any part thereof is proved to be defective by reason only of

faulty workmanship or materials, we will, at our option repair or

replace the same FREE OF CHARGE for labour, materials or

carriage on condition that:

●The appliance has been correctly installed and used only on

the electricity supply stated on the rating plate.

●The appliance has been used for normal domestic purposes

only, and in accordance with the manufacturer’s instructions.

●The appliance has not been serviced, maintained repaired,

taken apart or tampered with by any person not authorised

by us.

●All service work under this guarantee must be undertaken by

a Service Force Centre.

●Any appliance or defective part replaced shall become the

Company’s property.

●This guarantee is in addition to your statutory and other legal

rights.

Home visits are made between 8.30am and 5.30pm Monday

to Friday. Visits may be available outside these hours in which

case a premium will be charged.

Exclusions

This guarantee does not cover:

●Damage or calls resulting from transportation, improper use

or neglect, the replacement of any light bulbs or removable

parts of glass or plastic.

●Costs incurred for calls to put right an appliance which is

improperly installed or calls to appliances outside the United

Kingdom.

●Appliances found to be in use within a commercial

environment, plus those which are subject to rental

agreements.

●Products of Zanussi-Electrolux manufacture which are not

marketed by Zanussi-Electrolux.

European Guarantee

If you should move to another country within Europe then your

guarantee moves with you to your new home subject to the

following qualifications:

●The guarantee starts from the date you first purchased your

product.

●The guarantee is for the same period and to the same extent

for labour and parts as exists in the new country of use for

this brand or range of products.

●This guarantee relates to you and cannot be transferred to

another user.

●Your new home is within the European Community (EC) or

European Free Trade Area.

●The product is installed and used in accordance with our

instructions and is only used domestically, i.e. a normal

household.

●The product is installed taking into account regulations in

your new country.

Before you move please contact your nearest Customer Care

centre, listed below, to give them details of your new home.

They will then ensure that the local Service Organisation is

aware of your move and able to look after you and your

appliance.

France Senlis +33 (0) 344 62 29 29

Germany Nurnberg +49 (0) 800 234 7378

Italy Pordenone +39 (0) 434 39 4700

Sweden Stockholm +46 (0) 8 672 53 90

UK Slough +44 (0)1753 219897

Ireland Dublin +353 (0)1 4090751

Guarantee Conditions

18

Any electrical and/or plumbing work required to install

this appliance should be carried out by a qualified

electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a

drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a

close fitting sink unit or a pre-existing top, providing the

dimensions of the recess correspond to those shown in the

picture.

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear

retaining screws, pull the worktop from the back of the

machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the

adjustable feet. When inserting the machine, ensure that the

water inlet and drain hoses are not kinked or squashed.

During all operations that involve accessibility to internal

components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily

accessible for the service engineer in the event that a repair is

required.

If the dishwasher is later used as a free-standing appliance,

the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of

the door.

When the appliance is correctly levelled, the door will not catch

on either side of the cabinet.

If the door does not close correctly, loosen or tighten the

adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the

machine’s supply hose is designed to screw onto a 3/4" inch

gas thread spout.

The water pressure must be within the limits given in the

"Technical specifications". Your local Water Authority will

advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled

when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be

turned either to the left or the right to suit the installation by

means of the locknut. The locknut must be correctly fitted

to avoid water leaks. (Attention! NOT all models of

dishwashers have fill and drain hoses provided with locknut. In

this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have

not been used for a long time, you should run the water for a

few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been

used with another appliance.

The dishwasher is fitted with safety devices that prevent the

wash water returning into the drinking water system and

comply with the applicable plumbing regulations.

Installation instructions

19

820

570-600

450

IN04

Water outlet hose connection

The end of the drain hose can be connected in the following

ways:

1. To the sink outlet spigot, securing it to the underside of the

work surface. This will prevent waste water from the sink

running into the machine.

2. Hooked over the edge of the sink using the special curved

plastic guide (if provided with the machine).

3. To a stand pipe provided with vent-hole, minimum internal

diameter 4 cm.

The waste connection must be at a height of between 30 cm

(minimum) and 100 cm (maximum) from the bottom of the

dishwasher.

The drain hose can face either to the right or left of the

dishwasher

Ensure the hose is not bent or squashed as this could prevent

or slow down the discharge of water.

The sink plug must not be in place when the machine is

draining as this could cause the water to syphon back into the

machine.

If you use a drain hose extension it must be no longer than 2

metres and its internal diameter must be no smaller than the

diameter of the hose provided.

Likewise the internal diameter of the couplings used for

connections to the waste outlet must be no smaller than the

diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect

against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated

this can prevent the correct draining of your dishwasher.

We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this

safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the

socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with

the following code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

If you fit your own plug, the colours of the wires in the mains

lead of your appliance may not correspond with the markings

identifying the terminals in your plug.

Proceed as follows:

1. Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2. Connect the Blue (neutral) wire to the terminal in the plug

which is marked with the letter "N" or coloured black.

3. Connect the Brown (live) wire to the terminal in the plug

which is marked with the letter "L" or coloured red.

The plug moulded onto the lead incorporates a 13amp BSI362

fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The

cover/carrier is indicated by the coloured insert at the base of

the plug.

A replacement cover/carrier must be obtained from your local

Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance

has been installed.

The appliance should not be connected to the

electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced,

please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a

serious safety (shock) hazard. Ensure that it is

disposed of safely.

20

CS18

13A

CE04

E

NL

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing

programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and

rinse aid respectively and using the test programme (see "Washing programmes" chart).

Hints for test centres

21

Load: 9 standard place settings

Rinse aid setting: position 4 (Type III)

Detergent dosage : 5 g + 20 g (Type B)

Arrangement lower basket

Arrangement cutlery basket

Arrangement upper basket

without smaller bowl

and salad-bowl

Arrangement upper basket

with smaller bowl

and salad-bowl

Cup racks: position A

©Electrolux plc 2005

03/05 Subject to change without notice

From the Electrolux Group. The World’s No.1 choice.

The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such

as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the

world.