Zebex BTS-3392 Gun Type Wireless 2D Image Handheld Scanner User Manual
Zebex Industries Inc Gun Type Wireless 2D Image Handheld Scanner Users Manual
Zebex >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3400390 |
| Application ID | alwtPMwSupg2vxavc6Xo4A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.55kB (444353 bits) |
| Date Submitted | 2017-05-23 00:00:00 |
| Date Available | 2017-11-18 00:00:00 |
| Creation Date | 2017-03-17 11:18:52 |
| Producing Software | Acrobat Distiller 9.3.3 (Windows) |
| Document Lastmod | 2017-05-16 14:58:36 |
| Document Title | Users Manual |
| Document Creator | Acrobat PDFMaker 9.1 for Word |
| Document Author: | patrick.chen |
Scanner Outline LED Indicator Scan Window Power Button/ Scan Trigger Hand Strap Hole Micro USB slot Battery Compartment Z-3392BT Gun Type Wireless 2D Image Handheld Scanner Description Scan Window LED Indicator Function Emits a red beam for barcode reading Indicates the scanning status Press and hold for 3 second until a long beep is Power Button/Scan Trigger heard to turn power on or press to scan barcodes Hand Strap Hole Used to attach hand straps Battery Compartment Batteries are stored here Micro USB slot Used for communication and charging Package Contents Charging the Device Items contain in the package may vary depending on the model of the scanner. Installing Battery 1. Unscrew the cap from the battery compartment at the bottom of the scanner and insert the battery. 2. Make sure the red tag on the battery is tugged in and not blocking the cable connector and close the cap. 3. Tighten the screw on the cap to secure the battery. Wireless scanner with battery / Scanner cradle (optional) (with cradle) (without cradle) Li-ion battery pack Communication cable for cradle (optional) Connect the Cradle Mini USB B to mini USB A cable Communication cable Mini USB B to USB power adaptor only 5V USB Power adapter Connect the Device with Cradle or USB cable Approx. charging time: 4.5~6 hours Cable clip *Note: Actual product appearance may vary from the images on this page. or System Settings Barcode Value Scan Modes Trigger mode Description The scanner becomes inactive as soon as Return scanner to factory the data is transmitted. It must be defaults triggered to become active again. Auto scan mode The scanner is still active after the data is Return cradle host to factory transmitted but the successive defaults transmission of the same barcode is not allowed when the trigger switch is pressed again. Return to USB default Presentation mode (Communication cradle link Also called auto trigger mode. The required) scanner is inactive but will automatically detect barcodes presented in the scan zone and become active. Return to RS232 default (Communication cradle link required) USB Online Mode Return as USB-virtual COM port USB online mode default The scanner connects directly to a USB host to recharge and transmit data. Display firmware version Beeper Settings Radio Communication Good Read Beeper Tone Selection BT HID mode Medium beeper tone BT HID mode (Combo keyboard) High beeper tone For Apple mode (Enter PIN CODE then scan SET) Low beeper tone Multi Media Keyboard ( For Apple Mode) Speaker disable Software Keyboard ON/OFF( For Apple Mode) SET FCC Statement: This device complies with Part 15 of the FCC rules standard. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without C2PC.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : patrick.chen Comments : Company : Create Date : 2017:03:17 11:18:52+08:00 Modify Date : 2017:05:16 14:58:36+08:00 Subject : Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 9.3.3 (Windows) Keywords : Creator Tool : Acrobat PDFMaker 9.1 for Word Metadata Date : 2017:05:16 14:58:36+08:00 Format : application/pdf Creator : patrick.chen Title : Description : Document ID : uuid:452caf92-106c-4340-8e99-d98614d45522 Instance ID : uuid:724cb1ce-5294-434c-a100-52eb6f1823f7 Page Layout : OneColumn Page Count : 3EXIF Metadata provided by EXIF.tools