Zebex Z-721X Fixed Computer User Manual

Zebex Industries Inc Fixed Computer

UserManual.wiki >

Zebex >

Z-721X User Manual >

User manual HTML Version

1. User manual
2. Users Manual

User manual

Z-721x Series Product

QUICK START &

REGULATORY GUIDE

ZEBEX reserves the right to make changes to any product to improve reliability,

function, or design. ZEBEX does not assume any product liability arising out of, or in

connection with, the application or use of any product, circuit, or application described

herein. No license is granted, either expressly or by implication, estoppels, or otherwise

under any patent right or patent, covering or relating to any combination, system,

apparatus, machine, material, method, or process in which ZEBEX products might be

used. An implied license exists only for equipment, circuits, and subsystems contained

in ZEBEX products.

Quick Reference Guide 3

Features

10 in.Touchscreen Display

Figure 1.

Front view

Figure 2.

BackView

Camera

Code Scanne

External Speakers

udio Microphone

VESA Mounting Holes

Power Button

Quick Reference Guide 4

Figure 3.

View of Ports

Overview

Z-721x Series product is a pre-assembled system consisting of the following:

 10 in. touchscreen display

 Concierge HUB

 Barcode scanner

The final system hardware configuration may change based on customer

preference, including additional accessories (sold separately).

The final system mounting/installation is decided by the customer (e.g., mounting the

system on a wall, on a stand, or within a customer designed enclosure).

Ensure the mounting configuration allows end-users to easily interact with the

Concierge touchscreen, and allows adequate space for end-users to scan products

using the bar code scanner.

Unpacking

Carefully remove the Z-721x from the packaging to avoid damaging the touchscreen

display. Once removed from its packaging, inspect it for damage.

Please keep the packaging as it is the approved shipping container, and should be used

if the Z-721x needs to be returned for servicing.

Cleaning and Maintenance

 Always turn off the product before cleaning.

 The touchscreen surface may be cleaned using a soft clean cloth moistened with

mild window glass commercial cleaners.

 Use a soft cloth moistened with mild detergent to clean the display housing.

 Do not touch the display screen surface with sharp or hard objects.

 Do not use abrasive cleaners, waxes or solvents for cleaning.

 Do not operate the product under the following conditions:

 Extremely hot, cold, or humid environments.

 Near any appliance generating a strong magnetic field.

 In direct sunlight.

1.5

Setup and Installation Guide 5

Configuration Notes

The instructions, and screen captures in this guide describe default software applications

included with the Concierge. Customers and/or partners may develop, and install

additional custom software applications which run on the Concierge. In addition,

customers and/or partners may choose to add their own hardware accessories prior to

installation. Therefore, actual software and hardware configurations may vary at

individual sites.

Mounting the Z-721x

NOTE

The instructions in this guide provide basic installation guidance for the Z-721x

system.

WARNING

! Always utilize professional installers to safely install, mount, and

supply power to the Concierge Z-721x. Always ensure Z-721x mounting, and power

routing meets regional building codes.

IMPORTANT

The wall outlet must be located near the Z-721x, and be

easily accessible.

Mounting brackets are not sold with the Z-721x system. Obtain the appropriate

mounting brackets to mount the Z-721x using a mounting bracket which complies

with the VESA mounting standard(100 mm x 100 mm).

The total weight of the Z-721x system (without additional accessories, or

modifications is 3 lbs/1.4 kg).

For safety purposes, mounting brackets should be certified to support the total

weight of the final system (including additional accessories, or modifications by the

customer).

To mount the Z-721x using the appropriate mounting bracket:

1. The Z-721x mounting inserts are M4 x 10 mm. When selecting the appropriate

screw length, ensure its length safely engages the threads, but does not

penetrate the Z-721x bezel enclosure more than 0.39 in./10 mm.

2. Align the mounting holes on the selected mounting bracket with the mounting

holes on the Z-721x bezel enclosure.

3. Insert, and tighten the screws through each of the four aligned mounting holes.

Figure 3. Z-721x

Mounting Dimensions

Getting Started

1. Obtain a power cord (60320 C13 IEC) that is appropriate for your region and

amperage. Alternatively, this device support Power Over Ethernet.

2. Plug-in the male end of the power cord to the wall socket.

Scanning Bar Codes

To scan bar codes:

1. Hold a bar-coded item approximately 6 to 12 inches from the scanner's exit

window.

2. When the scanner's proximity sensor senses the item a red LED, and laser

aiming pattern projects which enables the user to position the bar code within

its field of view.

3. Center the printed bar code symbol within the aiming pattern, ensuring the

entire symbol is within the illuminated rectangular area formed by the pattern.

4. Upon a successful scan, bar code data transmits to the Concierge application.

SYSTEM

CPU TI OMAP 4470 Dual core 1.5GHz

Operating System Android 4. 2 . 2

Memory 1GB RAM & 16GB ROM(Optional : 64G )

Display 10.1" 1280x800 IPS; Capacitive type 5 points touch

Scanner 1D/2D decoding capability (Option)

Audio 2 x 1W speaker

1 x microphones

Camera Front: 5Mpixel 1080p 30fps capable imager(Option)

Buttons 1. Power*1

2. Volume (up and down)

I/O

HDMI x1;

USB x 2:

--USB2.0 High Speed Type A (Host) port (current output up to 1.5A)

--USB2.0 High Speed Type A (Host) port(current output up to 0.5A)

Micro USB x1: MicroUSB2.0 High Speed Host + Client (OTG) port

Audio in: External 3.5 mm port for external microphone

Audio out: External 3.5 mm port for stereo analog audio out

RS232 x 1;

Expansion Slot Support to 64G ; SDXC Card expansion capability ( FAT32 format )

Network

WPAN Bluetooth V2.1 + EDR

WLAN Dual Band (2.4 & 5GHz) 802.11a / b / g / n

Ethernet 1 Giga Ethernet RJ45

POWER

Input interface

1. POE input: IEEE 802.3af/at; Classification:4 ;max. 25.5W.

2. AC adapter(Option):

Input:AC100~240C, 50~60 Hz ;Output: 12VDC / 4.16A

PHYSICAL

Dimension (L) 285mm x (W) 215.15mm x (H) 38.7mm

Weight 1340g

ENVIRONMENTAL

Operating Temperature 0~50℃

Storage Temperature -20~70℃

Humidity 20 ~ 90% RH (non-condensing)

Environmental Sealing IP54 rated sealing(with back cover sealed)

ACCESSORIES

tion Accessor

ter(Input: AC100~240V, 50~50 Hz ; Output: 12VDC / 4.16A)

Other

Installation spec Support VESA MIS-D 100 (100mm x 100mm)

Notes :

FEDERALCOMMUNICATIONSCOMMISSIONINTERFERENCESTATEMENT

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital

device,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovide

reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This

equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalled

andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio

communications.However,thereisnoguaranteethatinterferencewillnotoccurina

particularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor

televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the

userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing

measures:

‐Reorientorrelocatethereceivingantenna.

‐Increasetheseparationbetweentheequipmentandreceiver.

‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe

receiverisconnected.

‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

CAUTION:

Anychangesormodificationsnotexpresslyapprovedbythegranteeofthisdevicecould

voidtheuser'sauthoritytooperatetheequipment.



RFexposurewarning

Thisequipmentmustbeinstalledandoperatedinaccordancewithprovidedinstructions

andtheantenna(s)usedforthistransmittermustbeinstalledtoprovideaseparation

distanceofatleast20cmfromallpersonsandmustnotbeco‐locatedoroperatingin

conjunctionwithanyotherantennaortransmitter.End‐usersandinstallersmustbe

providewithantennainstallationinstructionsandtransmitteroperatingconditionsfor

satisfyingRFexposurecompliance.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing

twoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevice

mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired

operation.

Zebex Z-721X Fixed Computer User Manual

Zebex Industries Inc Fixed Computer

Contents

User manual

Navigation menu

Namespaces

Views

Navigation