Zebra Technologies MC32N0 Mobile Computer User Manual MN000216A04a
Zebra Technologies Corporation Mobile Computer MN000216A04a
Contents
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2640331 |
| Application ID | tYEg75oWO9f4TIx1eFlUwA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 191.97kB (2399573 bits) |
| Date Submitted | 2015-06-08 00:00:00 |
| Date Available | 2015-06-08 00:00:00 |
| Creation Date | 2011-07-22 16:35:25 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2015-05-06 13:49:54 |
| Document Title | MN000216A04a.fm |
| Document Creator | FrameMaker 12.0.4 |
| Document Author: | XJK678 |
MC32N0 SERIES
REGULATORY GUIDE
Regulatory Information
This guide applies to Model Number MC32N0.
All Zebra devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Local language translations are available at the following
website: http://www.zebra.com/support.
Any changes or modifications to Zebra equipment, not
expressly approved by Zebra, could void the user's authority to
operate the equipment.
Antennas: Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could cause damage and may violate regulations.
CAUTION
Only use Zebra approved and UL Listed
accessories, battery packs and battery
chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must
be dry before connecting to an external power
source.
Declared maximum operating temperature: 50°C.
Radio Modules
Bluetooth® Wireless Technology
This is an approved Bluetooth product. For more information or
to view the End Product Listing, please visit http://
www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country Approvals
Zebra reserves the right to make changes to any product to improve reliability,
function, or design. Zebra does not assume any product liability arising out of, or
in connection with, the application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in
which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact the
Zebra Global Customer Support at: http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Regulatory markings, subject to certification, are applied to the
device signifying the radio(s) is/are approved for use in the
following countries: United States, Canada, Japan, China, S.
Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details
of other country markings. This is available at
http://www.zebra.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Cyprus, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United
Kingdom.
Operation of the device without regulatory approval is
illegal.
Country Roaming
This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.
Ad-Hoc Operation (2.4 GHz band)
Ad-Hoc operation is limited to Channels 1 - 11 (2412 - 2462
MHz).
Frequency of Operation - IC
Industry Canada Statement:
Zebra Technologies Corporation
Lincolnshire, IL 60069, U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in
many jurisdictions worldwide. All other trademarks are the property of their
respective owners.
© 2015 ZIH Corp and/or its affiliates. All rights reserved
MN000216A04 Rev. A - April 2015
Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk
of ergonomic injury follow the
recommendations below. Consult with your
local Health & Safety Manager to ensure that
you are adhering to your company’s safety
programs to prevent employee injury.
Reduce or eliminate repetitive motion
Maintain a neutral posture
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures.
CAUTION
•
•
•
•
•
•
•
•
•
•
•
Potentially Hazardous Atmospheres - Vehicles
Use
You are reminded of the need to observe restrictions on the
use of radio devices in fuel depots, chemical plants etc. and
areas where the air contains chemicals or particles (such as
grain, dust, or metal powders) and any other area where you
would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to
do so by airport or airline staff. If your device offers a 'flight
mode' or similar feature, consult airline staff as to its use in
flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may
affect medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities.
These requests are designed to prevent possible interference
with sensitive medical equipment.
Safety on the Road
Pacemakers
Do not take notes or use the device while driving. Jotting down
a “to do” list or flipping through your address book takes
attention away from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full
attention to driving. Check the laws and regulations on the use
of wireless devices in the areas where you drive. Always obey
them.
When using a wireless device behind the wheel of a car,
practice good common sense and remember the following tips:
1. Get to know your wireless device and any features such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try to
plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with aware
you are driving and suspend conversations that have the
potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the
Emergency services, (9-1-1 in the US, and 1-1-2 in Europe)
or other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone! The call can be made
regardless of any security codes and depending on a
network, with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call the
Emergency Services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number, as you would
want others to do for you.
8. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
“The wireless industry reminds you to use your device / phone
safely when driving.”
Pacemaker manufacturers recommended that a minimum of
15 cm (6 inches) be maintained between a handheld wireless
device and a pacemaker to avoid potential interference with
the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless
Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15 cm (6
inches) from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to
minimize the potential for interference.
• If you have any reason to suspect that interference is taking
place, turn OFF your device.
comply with FCC/IC RF exposure compliance requirements,
and should be avoided.
Périphériques portables
Cet appareil a été testé dans le cadre d'une utilisation typique,
c'est-àdire placé contre le corps. N'utilisez que des clips de
ceinture, des étuis et autres accessoires similaires qui ont été
testés et approuvés par Zebra afin de respecter les critères de
conformité de la FCC /IC. Les clips de ceinture, les étuis et les
accessoires proposés par des sociétés tierces peuvent ne pas
respecter les critères de conformité de la FCC/IC, ils doivent
donc être évités.
Laser Devices
Class 2 laser scanners use a low power, visible light diode. As
with any very bright light source, such as the sun, the user
should avoid staring directly into the light beam. Momentary
exposure to a Class 2 laser is not known to be harmful.
The following statement is required to comply with US and
international regulations.
Caution: Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous laser light exposure.
Zebra rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can
operate or be stored before needing replacement. Many
factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may occur.
Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity,
rusting of metallic parts and electrolyte leakage. When storing
batteries for one year or longer, the charge level should be
verified at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or included
as part of the mobile computer. For more information on Zebra
batteries, please visit: http://www.zebra.com/batterybasics
Battery Safety Guidelines
•
Scanner Labeling
The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular
care should be taken where the device is charged in a non
commercial environment.
Follow battery usage, storage, and charging guidelines
found in the user's guide.
Improper battery use may result in a fire, explosion, or other
hazard.
To charge the mobile device battery, the battery and
charger temperatures must be between 0 ºC and +40 ºC
(+32 ºF and +104 ºF)
Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger,
contact Zebra Global Customer Support.
Do not disassemble or open, crush, bend or deform,
puncture, or shred.
Severe impact from dropping any battery-operated device
on a hard surface could cause the battery to overheat.
Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, or expose to fire, explosion, or other hazard.
Do not leave or store the equipment in or near areas that
might get very hot, such as in a parked vehicle or near a
radiator or other heat source. Do not place battery into a
microwave oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to promptly dispose of used
re-chargeable batteries.
Do not dispose of batteries in fire.
Seek medical advice immediately if a battery has been
swallowed.
In the event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. If contact has been
made, wash the affected area with large amounts of water
and seek medical advice.
If you suspect damage to your equipment or battery,
contact Zebra Global Customer Support to arrange for
inspection.
Radio Frequency Interference RequirementsFCC
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help.
Review Copy
The device contains approved radio module. The module is
identified below.
• Zebra radio module supporting WLAN 802.11 a/b/g/n and
Bluetooth. Type: 21-148603-0B.
Warranty
pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.
Caution: The device for the band 5150 - 5250 MHz is only for
indoor usage to reduce potential for harmful interference to coChannel mobile satellite systems. High power radars are
allocated as primary users (meaning they have priority) of
5250 - 5350 MHz and 5650-5850 MHz and these radars could
cause interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande
5150 - 5250 MHz est réservé uniquement pour une utilisation à
l'intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes
canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of
wireless devices.
•
•
•
•
•
Other Medical Devices
Please consult your physician or the manufacturer of the
medical device, to determine if the operation of your wireless
product may interfere with the medical device.
Labels Read:
Only operate the device in accordance with the instructions
supplied.
1. LASER LIGHT-DO NOT STARE INTO BEAM. CLASS 2
LASER PRODUCT
2. CAUTION-CLASS 2 LASER LIGHT WHEN OPEN. DO
NOT STARE INTO THE BEAM
3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT
FOR DEVIATIONS PURSUANT TO LASER NOTICE NO.
50, DATED JUNE 24, 2007, AND IEC 60825-1 (Ed.2.0),
EN60825-1:2007.
International
LED Compliance Statement
The device complies with internationally recognized standards
covering human exposure to electromagnetic fields from radio
devices. For information on “International” human exposure to
electromagnetic fields refer to the Zebra Declaration of
Conformity (DoC) at http://www.zebra.com/doc.
For further information on the safety of RF energy from
wireless devices - see
http://www.zebra.com/corporateresponsibility located under
Wireless Communications and Health.
Classified as “EXEMPT RISK GROUP” according to IEC
62471:2006 and EN 62471:2008.
Pulse duration for SE4750 is 1.7 ms.
Pulse duration for SE4500 is 6.67 ms.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure EU Compliance.
US and Canada
Co-located Statement
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or
operating in conjunction with any other transmitter/antenna
except those already approved in this filing.
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure FCC/IC Compliance. The use of thirdparty belt-clips, holsters, and similar accessories may not
•
•
•
•
•
•
•
•
•
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry battery
producing or importing firms in
accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on
the batteries used in sales, giveaway or promotion. Contact a
qualified Taiwanese recycler for proper battery disposal.
Battery Information
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of batteries according to instructions.
Use only Zebra approved batteries. Accessories which have
battery charging capability are approved for use with the
following battery models:
• 82-000011-01 (3.7 VDC, 2740 mAh)
• 82-000012-01 (3.7 VDC, 4800 mAh)
CAUTION
•
Use with Hearing Aids
When some wireless devices are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some hearing
devices are more immune than others to this interference
noise, and wireless devices also vary in the amount of
interference they generate. In the event of interference you
may want to consult your hearing aid supplier to discuss
solutions.
Hearing Aid Compatibility
This device does not support Voice Over IP (VOIP) calls.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Radio Frequency Interference
Requirements - Canada
This Class B digital apparatus complies with Canadian ICES003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the
following restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie
Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable,
et (2) ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un fonctionnement
indésirable.
Label Marking: The Term “IC:” before the radio certification
only signifies that Industry Canada technical specifications
were met.
Marking and European Economic Area
(EEA)
The use of 2.4 GHz RLAN's, for use through the EEA, have the
following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Bluetooth Wireless Technology for use through the EEA has
the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Zebra hereby, declares that this device is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC and 2011/65/EU. A Declaration of
Conformity may be obtained from http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for
Interference
Class B ITE
この装置は、クラス B 情報技術装置です。この装置
は、家庭環境で使用することを目的としていますが、
この装置がラジオやテレビジョン受信機に近接して使
用されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。
Korea Warning Statement for Class B ITE
기 종별
사용자안내문
經型式認證合格之低功率射頻電機，非經許可，公司、商
號或使用者均不得擅自變更頻率、加大功率或變更原設計
之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信
；經發現有干擾現象時，應立即停用，並改善至無干擾時
方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電
波輻射性電機設備之干擾。
在 5.25 - 5.35 秭赫頻帶內操作之無線資訊傳輸設備，限
於室內使用。
Ukraine
이 기기는 가정용 (B 급 ) 전자파적합기기로서
B 급 기기
( 가정용 방송통신 주로 가정에서 사용하는 것을 목적으로 하며 ,
모든 지역에서 사용할 수 있습니다 .
기자재 )
Дане обладнання відповідає вимогам технічного
регламенту №1057, № 2008 на обмеження щодо
використання деяких небезпечних речовин в електричних
та електронних пристроях.
Other Countries
Australia
Thailand
Use of 5 GHz RLAN's in Australia is restricted in the following
band 5.60 - 5.65GHz.
Brazil
Declarações Regulamentares para MC32N0 - Brazil
Nota: “A marca de certificação se aplica ao Transceptor,
modelo MC32N0. Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando em caráter
primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e
atende aos requisitos técnicos aplicados, incluindo os limites
de exposição da Taxa de Absorção Específica referente a
campos elétricos, magnéticos e eletromagnéticos de
radiofrequência, de acordo com as Resoluções n° 303/2002 e
533/2009.
Este dispositivo está em conformidade com as diretrizes de
exposição à radiofrequência quando posicionado pelo menos
0 centímetros de distância do corpo. Para maiores
informações, consulte o site da Anatel.
Chile
Hong Kong
In accordance with HKTA1039, the band 5.15 GHz - 5.35 GHz
is for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.
South Korea
해당무선설비는 운용 중 전파혼신 가능성이 있음
당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과
관련된 서비스는 할 수 없습니다 .
Taiwan
臺灣
低功率電波輻射性電機管理辦法
第十二條
Waste Electrical and Electronic
Equipment (WEEE)
Open Source Software Packages will have source code
provided.
To view additional information regarding licenses,
acknowledgements and required copyright notices for open
source packages used in this Zebra product, touch Settings >
About phone > Legal information > Open source licenses.
Zebra Technologies Corporation, Inc. End
User License Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTAND IT AND AGREE TO BE
BOUND ITS TERMS. IF YOU DO NOT AGREE TO THE
TERMS OF THIS AGREEMENT, ZEBRA IS NOT WILLING TO
LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT
USE OR INSTALL THIS PRODUCT.
Grant of License. Zebra grants you (“Licensee” or “you”) a
personal, nonexclusive, nontransferable, nonassignable, no
cost license to use the software and documentation
(“Product(s)”) subject to the terms and conditions of this
Agreement. You shall use the Products only for your internal
business purposes, exclusively to support Zebra devices. Any
use of the Products outside of the conditions set forth herein is
strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your License.
In the event of a breach of this Agreement, Zebra will be
entitled to all available remedies at law or in equity (including
immediate injunctive relief and repossession of all Products
unless Licensee is a Federal agency of the United States
Government).
You shall not distribute, sublicense, rent, loan, lease, export,
re-export, resell, ship or divert or cause to be exported, reexported, resold, shipped or diverted, directly or indirectly, the
Products under this Agreement. You shall not, and shall not
permit others to: (i) modify, translate, decompile, bootleg,
reverse engineer, disassemble, or extract the inner workings of
the Products, (ii) copy the look-and-feel or functionality of the
Products; (iii) remove any proprietary notices, marks, labels, or
logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Zebra’s prior written
consent; or (v) utilize any computer software or hardware
which is designed to defeat any copy protection device, should
the Products be equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any
time and remains vested exclusively in Zebra. All intellectual
property developed, originated, or prepared by Zebra in
connection with the Products remain vested exclusively in
Zebra and this Agreement does not grant to Licensee any
intellectual property rights.
Portions of the Products are protected by United States patent
and copyright laws, international treaty provisions, and other
applicable laws. Therefore, you must treat the Products like
any other copyrighted material (e.g., a book or musical
recording) except that you may make one copy of the Product
solely for back-up purposes. Unauthorized duplication of the
Products constitutes copyright infringement, and in the United
States is punishable in federal court by fine and imprisonment.
Disclaimer. ZEBRA MAKES, AND YOU RECEIVE, NO
WARRANTIES OF ANY KIND, WHETHER EXPRESS,
IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH
YOU. ZEBRA SPECIFICALLY DISCLAIMS ANY WARRANTY
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS
FOR A PARTICULAR PURPOSE. THE PRODUCTS ARE
PROVIDED "AS IS." ZEBRA DOES NOT WARRANT THAT
THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR
THAT THE OPERATION OF THE PRODUCTS WILL BE
UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS
IN THE PRODUCTS WILL BE CORRECTED. ZEBRA
MAKES NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE
PRODUCTS. Some jurisdictions do not allow the exclusion of
implied warranties, so the above exclusion may not apply to
you.
Limitation of Liability. THE TOTAL LIABILITY OF ZEBRA
UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT
EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL
ZEBRA BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, INCLUDING WITHOUT
LIMITATION, LOST BUSINESS PROFITS, OR LIABILITY OR
INJURY TO THIRD PERSONS, WHETHER FORESEEABLE
OR NOT, REGARDLESS OF WHETHER ZEBRA HAS BEEN
ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. Some
jurisdictions do not permit limitations of liability for incidental or
consequential damages, so the above exclusions may not
apply to you. This Limitation of Liability provision survives the
termination of this Agreement and applies notwithstanding any
contrary provision in this Agreement. Licensee must bring any
action under this Agreement within one (1) year after the cause
of action arises.
Maintenance. Unless provided for in a separate agreement,
Zebra shall not be responsible for maintenance or field service
of the Products.
High Risk Activities. The Products are not fault-tolerant and
are not designed, manufactured or intended for use or resale
as on-line control software in hazardous environments
requiring fail-safe performance, such as in the operation of
nuclear facilities, aircraft navigation or communication
systems, air traffic control, direct life support machines, or
weapons systems, in which the failure of the Products could
lead directly to death, personal injury, or severe physical or
environmental damage ("High Risk Activities"). Zebra and its
suppliers specifically disclaim any express or implied warranty
of fitness for High Risk Activities, and if you elect to use the
Products in any High Risk Activities, you agree to indemnify,
defend, and hold Zebra harmless from and against any and all
costs, damages, and losses related to that use.
U.S. Government. If you are acquiring the Products on behalf
of any unit or agency of the U.S. Government, the following
shall apply. Use, duplication, or disclosure of the Products is
subject to the restrictions set forth in subparagraphs (c) (1) and
(2) of the Commercial Computer Software - Restricted Rights
clause at FAR 52.227-19 (JUNE 1987), if applicable, unless
being provided to the Department of Defense. If being
provided to the Department of Defense, use, duplication, or
disclosure of the Products is subject to the restricted rights set
forth in subparagraph (c) (1) (ii) of the Rights in Technical Data
and Computer Software clause at DFARS 252.227-7013 (OCT
1988), if applicable. Products may or may not include a
Restricted Rights notice, or other notice referring specifically to
the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but
only to the extent that such terms and conditions are not
inconsistent with the rights provided to you under the
aforementioned provisions of the FAR and DFARS, as
applicable to the particular procuring agency and procurement
transaction.
Governing Law. This Agreement shall be governed by the laws
of the United States of America to the extent that they apply
and otherwise by the laws of the State of New York without
regard to its conflict of laws provisions.
Compliance with Laws. Licensee will comply with all applicable
laws and regulations, including export laws and regulations of
the United States. Licensee will not, without the prior
authorization of Zebra and the appropriate governmental
authority of the United States, in any form export or re-export,
sell or resell, ship or reship, or divert, through direct or indirect
means, any item or technical data or direct or indirect products
sold or otherwise furnished to any person within any territory
for which the United States Government or any of its agencies
at the time of the action, requires an export license or other
governmental approval. Violation of this provision will be a
material breach of this Agreement, permitting immediate
termination by Zebra.
Third Party Software. The Products may contain one or more
items of Third-Party Software. The terms of this Agreement
govern your use of any Third-Party Software UNLESS A
SEPARATE THIRD-PARTY SOFTWARE LICENSE IS
INCLUDED, IN WHICH CASE YOUR USE OF THE THIRDPARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one or
more items of Open Source Software. Open Source Software
is software covered by a publicly available license governed
solely under Copyright law, whereas the complete terms and
obligations of such license attach to a licensee solely through
the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of
attribution obligations, distribution obligations, copyleft
obligations, and intellectual property encumbrances. The use
of any Open Source Software is subject to the terms and
conditions of this Agreement as well as the terms and
conditions of the corresponding license of each Open Source
Software package. If there is a conflict between the terms and
conditions of this Agreement and the terms and conditions of
the Open Source Software license, the applicable Open
Source Software license will take precedence. Copies of the
licenses for the included Open Source Software, if any, as well
as their attributions, acknowledgments, and software
information details, are provided in the electronic copy of this
Agreement, which is available in the Legal Notices or
README file associated with the Product. Zebra is required to
reproduce the software licenses, acknowledgments and
copyright notices as provided by
the authors and owners, thus, all such information is provided
in its native language form, without modification or translation.
Depending on the license terms of the specific Open Source
Software, source code may not be provided. Please reference
and review the entire Open Source Software information to
identify which Open Source Software packages have source
code provided or available. For instructions on how to obtain a
copy of any source code made publicly available by Zebra
related to Open Source Software distributed by Zebra, you
may send your request (including the Zebra Product name and
version, along with the Open Source Software specifics) in
writing to: Zebra Technologies Corporation, Open Source
Software Management, One Motorola Plaza Holtsville, NY
11742-1300 USA.
Review Copy
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
China
เครื่ องโทรคมนาคมและอุ ปกรณ นี้
มี ความสอดคล องตามข อกําหนดของ กทช .
informacije o vraèilu izdelka obišèite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Zebra för återvinning.
Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei
enää käytetä. Lisätietoja tuotteen palauttamisesta on
osoitteessa http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra
til recirkulering, når de er udtjent. Læs oplysningerne om
returnering af produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος
της διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra
για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με
την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar
tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra
għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna lprodott, jekk jogħġbok żur: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia
byť po uplynutí doby ich životnosti vrátené spoločnosti Zebra
na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai
iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu,
skatiet: http://www.zebra.com/weee.
English: For EU Customers: All products at the end of their life
must be returned to Zebra for recycling. For information on
how to return product, please go to:
http://www.zebra.com/weee
Français : Clients de l'Union Européenne : Tous les produits
en fin de cycle de vie doivent être retournés à Zebra pour
recyclage. Pour de plus amples informations sur le retour de
produits, consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los
productos deberán entregarse a Zebra al final de su ciclo de
vida para que sean reciclados. Si desea más información
sobre cómo devolver un producto, visite:
http://www.zebra.com/weee.
Български: За клиенти от ЕС: След края на полезния им
живот всички продукти трябва да се връщат на Zebra за
рециклиране. За информация относно връщането на
продукти, моля отидете на адрес:
http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen
am Ende ihrer Lebensdauer zum Recycling an Zebra
zurückgesandt werden. Informationen zur Rücksendung von
Produkten finden Sie unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a
Zebra al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de
vida devem ser devolvidos à Zebra para reciclagem. Para
obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan
het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane
z eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich
utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê
na stronie internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta
külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket
a Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A
termék visszajuttatásának módjával kapcsolatos tudnivalókért
látogasson el a http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur
Software Support
Zebra wants to ensure that customers have the latest release
of entitled software at the time of product purchase.
To confirm that your Zebra device shipped with the latest
release of entitled software, visit: www.zebra.com/support.
Check for the latest software from Software Downloads >
Product Line/Product > Go.
If your device does not have the latest entitled software
release as of your product purchase date, please e-mail a
request to Zebra at: entitlementservices@zebra.com.
You must include the following essential device information
with your request:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the
latest software release, you will receive an e-mail containing a
link directing you to a Zebra web site to download the
appropriate software.
Open Source Software Information
For instructions on how to obtain a copy of any source code
being made Open Source by Zebra related to software used in
this Zebra Product you may send your request in writing to:
Zebra Technologies Corporation
Open Source Software Management
One Motorola Plaza Holtsville, NY 11742-1300, U.S.A.
In your request, please include the Zebra Product Name and
Version, along with the Open Source Software specifics, such
as the Open Source Software Name and Version.
Note, the source code for the Open Source Software may be
resident on the Zebra Product Installation Media, or on
supplemental Zebra Product Media. Please reference and
review the entire Zebra Open Source Software Legal Notices
and End User License Agreement for the details on location
and methods of obtaining the source code.
Note, dependent on the license terms of the Open Source
Software, source code may not be provided. Please reference
and review the entire Zebra Open Source Software Legal
Notices and End User License Agreement for identifying which
CMM Disclosure
有害物质
部件名称
(Parts)
铅
汞
镉
六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr(VI))
(PBB)
(PBDE)
金属部件
(Metal Parts)
电路模块
(Circuit Modules)
电缆及电缆组件
(Cables and Cable
Assemblies)
塑料和聚合物部件
(Plastic and
Polymeric Parts)
光学和光学组件
(Optics and
Optical
Components)
电池
(Batteries)
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量
超出GB/T 26572 规定的限量要求。(企业可在此处，根
据实际情况对上表中打“×”的技术原因进行进一步说
明。）
This table was created to comply with China RoHS
requirements.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract Page Mode : UseNone XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : FrameMaker 12.0.4 Modify Date : 2015:05:06 13:49:54+08:00 Create Date : 2011:07:22 16:35:25Z Metadata Date : 2015:05:06 13:49:54+08:00 Format : application/pdf Title : MN000216A04a.fm Creator : XJK678 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:3e34eb35-d08b-4d16-97d0-ae85aaa9f61e Instance ID : uuid:7b86fc46-5602-46dd-bbc5-c0b60c7464a9 Has XFA : No Page Count : 2 Language : en Author : XJK678EXIF Metadata provided by EXIF.tools