Zebra Technologies MC330M Mobile Computer User Manual MC33XX Regulatory Guide en

Zebra Technologies Corporation Mobile Computer MC33XX Regulatory Guide en

Contents

User Manual Regulatory

MC33XX
Regulatory Guide
©2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the
stylized Zebra head are trademarks of ZIH Corp, registered in many
jurisdictions worldwide. All other trademarks are the property of their
respective owners.
MN-003144-01 Rev. A - 12/17
Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA
www.zebra.com
Printed in China
Warranty
For the complete Zebra hardware product warranty
statement, go to: www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to
operate in your facility’s network and run your
applications.
If you have a problem using your equipment,
contact your facility’s Technical or Systems
Support. If there is a problem with the equipment,
they will contact the Zebra Global Customer
Support at www.zebra.com/support.
For the latest version of this guide go to:
www.zebra.com/support.
User Information
For information on the MC33XX, see the MC33XX
Mobile Computer User Guide. Go to:
www.zebra.com/support.
Regulatory Information
This device is approved under Zebra Technologies
Corporation.
This guide applies to the following Model Numbers:
MC330M, MC330K.
All Zebra devices are designed to be compliant with
the rules and regulations in the locations they are
sold and will be labeled as required.
Local language translations are available at the
following website: www.zebra.com/support.
Any changes or modifications to Zebra equipment
not expressly approved by Zebra could void the
user's authority to operate the equipment.
Declared maximum operating temperature: 50°C.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more
information or to view the End Product Listing,
please visit www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country
Approvals
Regulatory markings subject to certification are
applied to the device signifying the radio(s) is/are
approved for use in the following countries and
continents: United States, Canada, Japan, China,
South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC)
for details of other country markings. This is
available at: www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria,
Croatia, Czech Republic, Cyprus, Denmark,
Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden,
Switzerland, and the United Kingdom.
Country Roaming
This device incorporates the International Roaming
feature (IEEE802.11d), which will ensure the
product operates on the correct channels for the
particular country of use.
Ad-Hoc Operation (2.4 GHz band)
Ad-Hoc operation is limited to:
• Channels 1 - 11 (2412 - 2462 MHz)
Wi-Fi Direct
Operation is limited to the following channels/
bands as supported in the country of use:
• Channels 1 - 11 (2412 - 2462 MHz)
• Channels 36 - 48 (5150 - 5250 MHz)
• Channels 149 - 165 (5745 - 5825 MHz)
Frequency of Operation – FCC
and IC
5 GHz Only
Industry Canada Statement
2.4 GHz Only
The available channels for 802.11 b/g operation in
the US are Channels 1 to 11. The range of
channels is limited by firmware.
Health and Safety
Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within
easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the
manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer
about any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place
objects, including either installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Position the device within easy reach. Be able to
access the device without removing your eyes from
the road.
For Safe installation
• Do not put your phone in a location that
obstructs the drivers vision or interferes with the
operation of the Vehicle.
• Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving.
Jotting down a “to do” list or flipping through your
address book takes attention away from your
primary responsibility, driving safely.
When driving a car, driving is your first responsibility
- Give full attention to driving. Check the laws and
regulations on the use of wireless devices in the
areas where you drive. Always obey them.
When using a wireless device behind the wheel of a
car, practice good common sense and remember
the following tips:
1. Get to know your wireless device and any
features such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and even heavy traffic
can be hazardous.
4. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
5. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations that have
the potential to divert your attention from the
road.
6. Use your wireless phone to call for help. Dial
the Emergency services, (9-1-1 in the US, and
1-1-2 in Europe) or other local emergency
number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free
call on your wireless phone! The call can be
made regardless of any security codes and
depending on a network, with or without a SIM
card inserted.
7. Use your wireless phone to help others in
emergencies. If you see an auto accident,
crime in progress or other serious emergency
where lives are in danger, call the Emergency
Services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number, as
you would want others to do for you.
8. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or other
special non-emergency wireless number.
“The wireless industry reminds you to use your
device / phone safely when driving”.
Warnings for Use of Wireless
Devices
Potentially Hazardous
Atmospheres – Vehicles Use
You are reminded of the need to observe
restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the
air contains chemicals or particles (such as grain,
dust, or metal powders) and any other area where
you would normally be advised to turn off your
vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are
instructed to do so by airport or airline staff. If your
device offers a ‘flight mode’ or similar feature,
consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy
and may affect medical electrical equipment.
Wireless devices should be switched off wherever
you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed
to prevent possible interference with sensitive
medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a
minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are
consistent with independent research and
recommendations by Wireless Technology
Research.
Persons with Pacemakers:
• Should ALWAYS keep the device more than
15 cm (6 inches) from their pacemaker when
turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker
to minimise the potential for interference.
• If you have any reason to suspect that
interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer
of the medical device, to determine if the operation
of your wireless product may interfere with the
medical device.
RF Exposure Guidelines
Reducing RF Exposure – Use
Properly
Only operate the device in accordance with the
instructions supplied.
International
The device complies with internationally recognized
standards covering human exposure to
electromagnetic fields from radio devices. For
information on 'International' human exposure to
electromagnetic fields, refer to the Zebra
Declaration of Conformity (DoC) at
www.zebra.com/doc.
For further information on the safety of RF energy
from wireless devices, see www.zebra.com/
responsibility located under Corporate
Responsibility.
Europe
Remote and Standalone Antenna
Configurations
Handheld Devices
This device was tested for typical body worn
operation. Use only Zebra tested and approved
belt clips, holsters, and similar accessories to
ensure EU Compliance.
US and Canada
Co-located statement
To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter
must not be co-located or operating in conjunction
with any other transmitter/antenna except those
already approved in this filling.
Terminals (placed to ear or used with
headset)
Use only Zebra tested and approved belt clips,
holsters, and similar accessories to ensure FCC
Compliance. The use of third-party belt clips,
holsters, and similar accessories may not comply
with FCC RF exposure compliance requirements
and should be avoided. The FCC has granted an
Equipment Authorization for these terminals with all
reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR
information on these terminals is on file with the
FCC and can be found under the Display Grant
section of www.fcc.gov/oet/ea/fccid.
Handheld Devices
This device was tested for typical body worn
operation. Use only Zebra tested and approved
belt-clips, holsters, and similar accessories to
ensure FCC Compliance. The use of third-party
belt-clips, holsters, and similar accessories may not
comply with FCC RF exposure compliance
requirements, and should be avoided.
Laser Devices
Class 2 laser scanners use a low power, visible light
diode. As with any very bright light source such as
the sun, the user should avoid staring directly into
the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.
Scanner Labeling
Labels Read:
1. LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT.
2. CAUTION - CLASS 2 LASER LIGHT WHEN
OPEN. DO NOT STARE INTO THE BEAM.
3. COMPLIES WITH 21CFR1040.10 and 1040.11
EXCEPT FOR DEVIATIONS PURSUANT TO
LASER NOTICE NO. 50, DATED JUNE 24, 2007
and IEC/EN 60825-1:2014.
LED Devices
Classified as 'EXEMPT RISK GROUP' according to
IEC 62471:2006 and EN 62471:2008.
Pulse duration: 1.7 ms for MC33 Terminal with
SE4750.
Pulse duration: Continuous Wave for MC33
Terminal with SE4850.
Power Supply
Use ONLY a Zebra approved Nationally
Recognized Test Laboratory (NRTL) Certified ITE
(LPS/SELV) power supply with electrical ratings:
Output 5.4 VDC, min 1.8 A, with a maximum
ambient temperature of at least 50°C. Use of
alternative power supply will invalidate any
approvals given to this unit and may be dangerous
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry
battery producing or importing
firms in accordance with Article
15 of the Waste Disposal Act are required to
indicate the recycling marks on the batteries used in
sales, giveaway, or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories
which have battery charging capability are
approved for use with the following battery models:
• Part Number BTRY-MC33-52MA-01 (3.7 VDC,
2,400 mAh).
• Part Number BTRY-MC33-52MA-IN (3.7 VDC,
2,400 mAh).
• Part Number BTRY-MC33-27MA-01 (3.7 VDC,
1,370 mAh).
• Part Number BTRY-MC33-27MA-IN (3.7 VDC,
1,370 mAh).
Zebra approved rechargeable battery packs are
designed and constructed to the highest standards
within the industry.
However, there are limitations as to how long a
battery can operate or be stored before needing
replacement. Many factors affect the actual life
cycle of a battery pack such as heat, cold, harsh
environmental conditions, and severe drops.
When batteries are stored over six months, some
irreversible deterioration in overall battery quality
may occur. Store batteries at half of full charge in a
dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts,
and electrolyte leakage. When storing batteries for
one year or longer, the charge level should be
verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run
time is detected.
Standard warranty period for all Zebra batteries is
one year, regardless if the battery was purchased
separately or included as part of the mobile
computer or bar code scanner. For more
information on Zebra batteries, please visit:
www.zebra.com/batterybasics.
Battery Safety Guidelines
The area in which the units are charged should be
clear of debris and combustible materials or
chemicals. Particular care should be taken where
the device is charged in a non-commercial
environment.
• Follow battery usage, storage, and charging
guidelines found in the user's guide.
• Improper battery use may result in a fire,
explosion, or other hazard.
• To charge the mobile device battery, the battery
and charger temperatures must be between
+32°F and +104°F (0°C and +40°C).
• Do not use incompatible batteries and chargers.
Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or
other hazard. If you have any questions about
the compatibility of a battery or a charger,
contact Zebra support.
• For devices that utilize a USB port as a charging
source, the device shall only be connected to
products that bear the USB-IF logo or have
completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or
deform, puncture, or shred.
• Severe impact from dropping any battery-
operated device on a hard surface could cause
the battery to overheat.
• Do not short circuit a battery or allow metallic or
conductive objects to contact the battery
terminals.
• Do not modify or remanufacture, attempt to
insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to
fire, explosion, or other hazard.
• Do not leave or store the equipment in or near
areas that might get very hot, such as in a
parked vehicle or near a radiator or other heat
source. Do not place battery into a microwave
oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly
dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery
has been swallowed.
• In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes. If
contact has been made, wash the affected area
with large amounts of water and seek medical
advice.
• If you suspect damage to your equipment or
battery, contact Zebra support to arrange for
inspection.
Radio Frequency
Interference Requirements-
FCC
Note: This equipment
has been tested and
found to comply with
the limits for a Class B
digital device, pursuant
to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications. However
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV
technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Radio Frequency
Interference Requirements-
Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
This device complies with Industry Canada's
licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not
cause interference; and (2) This device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radio
CAUTION Only use Zebra approved and UL
Listed accessories, battery packs and
battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must
be dry before connecting to an external
power source.
CAUTION Operation of the device
without regulatory approval is illegal.
CAUTION The device for the band
5150-5250 MHz is only for indoor
usage to reduce potential for harmful
interference to co-Channel mobile
satellite systems. High power radars
are allocated as primary users
(meaning they have priority) of 5250-
5350 MHz and 5650-5850 MHz and
these radars could cause interference
and/or damage to LE-LAN devices.
AVERTISSEMENT Le dispositive
fonctionnant dans la bande 5150-5250
MHz est réservé uniquement pour une
utilisation à l'intérieur afin de réduire
les risques de brouillage préjudiciable
aux systèmes de satellites mobiles
utilisant les mêmes canaux. Les
utilisateurs de radars de haute
puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité)
pour les bands 5250-5350 MHz et
5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN-
EL.
CAUTION In order to avoid or minimize
the potential risk of ergonomic injury,
follow the recommendations below.
Consult with your local Health & Safety
Manager to ensure that you are
adhering to your company's safety
programs to prevent employee injury.
NOTE Connection to an alert device
that will cause a vehicle horn to sound
or lights to flash on receipt of a call on
public roads is not permitted.
IMPORTANT Before installing or using,
check state and local laws regarding
windshield mounting and use of
equipment.
CAUTION Please observe all warning
notices with regard to the usage of
wireless devices.
Safety Information
CAUTION Use of controls, adjustments,
or the performance of procedures
other than those specified erein may
result in hazardous laser light
exposure.
◰
ݹ䗀ሴयⴤ㿶ݹᶏ 2 ㊫
◰
ݹӗ૱
LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2
LASER PRODUCT. LASERLICHT - NICHT IN DEN STRAHL
BLICKEN. LASER KLASSE 2. LUMIÉRE LASER - NE PAS
REGARDER DANS LE FAISCEAU. APPAREIL À LASER DE
CLASSE 2. 630-680nm, 1mW
ZEBRA TECHNOLOGIES CORP.
HOLTSVILLE, NY 11742
MODEL
රਧර㲏
: MC330K
(输入/輸入)
X.XV X.XA
1
32
CAUTION Risk of explosion if battery is
replaced by an incorrect type. Dispose of
batteries according to instructions.
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
D R A F T 3
électrique subi même si le brouillage est
susceptible d'en compromettre le fonctionnement.
For RLAN Devices:
The use of 5 GHz RLAN in Canada has the
following restrictions:
• Restricted Band 5.60 - 5.65 GHz
Pour les équipements RLAN:
L'utilisation de la bande RLAN 5 GHz au Canada
présente les limitations suivantes :
• Bande restreinte 5.60 - 5.65 GHz
Label Marking: The Term 'IC:' before the radio
certification only signifies that Industry Canada
technical specifications were met.
Etiquette de marquage: Le terme "IC" avant la
certification radio signifie que le produit est
compatible avec le spécification Industrie Canada.
Marking and European
Economic Area (EEA)
The use of 5 GHz RLAN throughout the EEA has
the following restrictions:
• 5.15 - 5.35 GHz is restricted to indoor use only.
Statement of Compliance
Zebra hereby declares that this radio equipment is
in compliance with Directives 2014/53/EU and
2011/65/EU. The full text of the EU Declaration of
Conformity is available at the following internet
address: www.zebra.com/doc.
Korea Warning Statement for
Class B ITE
Other Countries
Australia
The use of 5 GHz RLAN in Australia is restricted in
the following band 5.60 - 5.65 GHz.
Brazil
Declarações Regulamentares para
MC330M, MC330K - Brasil
Nota: A marca de certificação se aplica ao
Transceptor, modelo MC330M, MC330K. Este
equipamento opera em caráter secundário, isto é,
não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando
em caráter primário.
Para maiores informações sobre ANATEL consulte
o site: www.anatel.gov.br.
Este produto está homologado pela Anatel, de
acordo com os procedimentos regulamentados
pela Resolução n°242/2000 e atende aos
requisitos técnicos aplicados, incluindo os limites
de exposição da Taxa de Absorção Específica
referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência, de acordo
com as Resoluções n° 303/2002 e 533/2009.
Chile
Conforme a Resolución 755 parte j.1), se ajustará
el dispositivo a operar en interiores en las
siguientes bandas con una potencia máxima
radiada no superior a 150mW:
• 2.400 a 2.483,5 MHz
• 5.150 a 5.250 MHz
• 5.250 a 5.350 MHz
• 5,470 a 5.725 MHz
• 5.725 a 5.850 MHz
Además, de acuerdo con Resolución 755, para la
banda 5150 - 5250 MHz la operación del equipo
estará restringida al interior de inmuebles y la
densidad de potencia radiada máxima no supera
7,5 mW/MHz en cualquier banda de 1 MHz y
0.1875 mW/25 kHz en cualquier banda de 25 kHz.
Para la tecnología NFC en la banda 13.553 a
13.567 kHz, la intensidad de campo eléctrico no
excederá 20 mV/m a 30 metros, conforme a
Resolucion 755 parte Art 1. e)
China
通过访问以下网址可下载当地语言支持的产品说明
书
www.zebra.com/support
锂电池安全警示语 :
警告：请勿拆装，短路，撞击，挤压或者投入火中
注意：如果电池被不正确型号替换，或出现鼓胀，
会存在爆炸及其他危险
请按说明处置使用过的电池
电池浸水后严禁使用
合格证：
Eurasian Customs Union
Евразийский Таможенный Союз
Данный продукт соответствует требованиям
знака EAC.
Hong Kong
In accordance with HKTA1039, the band 5.15 GHz
- 5.35 GHz is for indoor operation only.
Mexico
La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
South Korea
해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로
인명안전과 관련된 서비스는 할 수 없습니다
Taiwan
臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公
司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合
法通信；經發現有干擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。
前項合法通信，指依電法信規定作業之無線電通
信。
應避免影響附近雷達系統之操作
低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作
Ukraine
Дане обладнання відповідає вимогам технічного
регламенту № 1057, 2008 на обмеження щодо
використання деяких небезпечних речовин в
електричних та електронних пристроях.
Turkish WEEE Statement of
Compliance
EEE Yönetmeliğine Uygundur.
English: For EU Customers: All products at the
end of their life must be returned to Zebra for
recycling. For information on how to return product,
please go to: www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je
nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu
vrácení produktu najdete na webové stránce:
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal
returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af
produkter på: www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle
Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten
finden Sie unter www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi:
www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos
los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un
producto, visite: www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les
produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus
amples informations sur le retour de produits,
consultez : www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se
proizvodi po isteku vijeka trajanja moraju vratiti
tvrtki Zebra na recikliranje. Informacije o načinu
vraćanja proizvoda potražite na web-stranici:
www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono
giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web:
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to
kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Zebra, lūdzu, skatiet:
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus
jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip
grąžinti gaminį, rasite: www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden
tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a www.zebra.com/weee
weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu
waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten
dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling.
Raadpleeg www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej:
Produkty wycofane z eksploatacji naleźy zwrócić
do firmy Zebra w celu ich utylizacji. Informacje na
temat zwrotu produktów znajdują się na stronie
internetowej www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos
no fim de vida devem ser devolvidos à Zebra para
reciclagem. Para obter informações sobre como
devolver o produto, visite: www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate
produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi:
www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky
výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na:
www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vračilu izdelka obiščite:
www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella:
Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä.
Lisätietoja tuotteen palauttamisesta on osoitteessa
www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar
produkten finns på www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan
tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında
bilgi için lütfen şu adresi ziyaret edin:
www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα,
στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για
περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη
διεύθυνση www.zebra.com/weee στο Διαδίκτυο.
Български: За клиенти от ЕС: След края на
полезния им живот всички продукти трябва да
се връщат на Zebra за рециклиране. За
информация относно връщането на продукти,
моля отидете на адрес: www.zebra.com/weee.
기 종 별 사 용 자 안 내 문
B급 기기
(가정용
방송통신기자재
)
이 기기는 가정용 (B 급 )
전자파적합기기로서 주로
가정에서 사용하는 것을 목적으로
하며 , 모든 지역에서 사용할 수
있습니다 ..
Waste Electrical and
Electronic
Equipment (WEEE)
D R A F T 3

Navigation menu