Zebra Technologies MC55E0 Enterprise Digital Assistant User Manual QSG

Zebra Technologies Corporation Enterprise Digital Assistant QSG

Contents

User Manual QSG

MC55E0126115812379107343123432512343572688610910 91213141716182015192122Create a PartnershipInstall Synchronization SoftwareCommunicate with Host1 Scan/Action Button2 Up/Down Button3 Microphone4 Power Button5 I/O Connector 6 KeypadNote 1: To reset the MC55, press and hold the Power button for five (5) seconds. FEATURESCOMMUNICATIONBATTERY INSTALLATIONNumeric Keypad Alpha-Numeric Keypad CHARGINGDownload ActiveSync® or Windows Mobile Device Center from http://www.microsoft.com and follow the instructions to install the software onto the host computer.Follow the on-screen instructions to establish a connection between the MC55 and the host computer.Blue Key Use this key to access function keys shown on the keypad in blue.>Orange KeyUse this key to access the secondary layer of characters and actions.>>>>>Press the Blue key once to activate this state temporarily, followed by another key. Press the Blue key twice to lock this state. Press the Blue key a third time to unlock.Press the Orange key once to activate this state temporarily, followed by another key. Press the Orange key twice to lock this state. Press the Orange key a third time to unlock.NotificationsCharging/Battery Status LED:Scan/Decode LED:Slow blinking amber: Battery chargingSolid amber: Fully chargedFast blinking amber: Charging errorRed: Scanning activeGreen: Good DecodeScan/DecodeCharging/Battery StatusInsert the Battery1. Insert the battery, bottom first, into the battery compartment.2. Press down on the battery until the battery latch snaps into place.3. Replace the handstrap.Charge the MC55Charge the BatterySlow Blinking Amber = ChargingCharging/Battery Status LEDSolid Amber = Fully chargedFast Blinking Amber = Charging errorNote: The 3600 mAh battery charges in less than six hours.Use the Four-slot Battery Charger to charge batteries separately.Note: Remove protective shipping film that covers the touch screen, exit window and camera window before using.Press the Orange key once to lock the keypad into Alpha state. Press the Orange key a second time to return to the normal state.Press the Blue key once to activate this state, followed by another key.Blue Key >Orange KeyUse this key to access the secondary layer ofcharacters.>>Use the Single-slot cradles (USB or Ethernet/Modem/USB), Four-slot cradles (Charge Only or Ethernet) or cables to charge the battery in the MC55.You can also charge a spare battery using the Single-slot cradle.12 Handstrap13 Battery14 Battery Latch15 Camera Flash (optional)16 Camera (optional)17 Exit Window (see Data Capture Options)4 (Note 1)18 Tether19 Scan/Action Button20 Action Button21 Stylus 22 Speaker7 Scan/Action Button8 Touch Screen (with screen protector)9 Scan/Decode LED10 Charging/Battery Status LED11 Not UsedQuick Start GuideUse this key to access function keys shown on the keypad in blue.3DRAFT
www.zebra.com/MC55Zebra Technologies CorporationLincolnshire, IL U.S.A.AVOID EXTREMEWRIST ANGLESScreen Protector Charge Only CableZebra recommends the continued use of a screen protector to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include:• Protection from scratches and gouges• Durable writing and touch surface with tactile feel• Abrasion and chemical resistance• Glare reduction• Keeping the device’s screen looking like new• Quick and easy installation.Not using a screen protector can affect your warranty coverage. An initial screen protector is already applied to your MC55E0. Contact your local account manager or Zebra for more information and purchasing details. Part number: KT-67525-01R Screen Protector 3/pk.MN-003059-01 Rev. A — August 2017AVOID EXTREME WRIST ANGLESMicroSD Card InstallationACCESSORIESAuto Charge CableUSB/Charge CableFour-slot Battery ChargerSingle-slot USB CradleSingle-slot Ethernet/Modem/USB CradleVehicle HolderFour-slot Charge Only CradleFour-slot Ethernet CradleImaging Camera DecodeCamera Photo1. Launch a bar code reading application on the MC55E0.2. Position the MC55E0 toward the bar code.3. Press the Scan button.4. In the image window align the red target over the bar code. When the MC55E0 decodes the bar code the Scan/Decode LED light green and a beep sounds.5. Release the Scan button.Setting up, using and troubleshooting the MC55E0MC55E0 User Guide and Integrator GuideSoftware UpgradesAvailable at: www.zebra.com/supportAdditional SoftwareCheck Zebra web site for approved applications.www.zebra.com/mc55Connecting and synchronizing with the host computerActiveSync® Help on the host computer. To view help, start ActiveSync®,Click Help - Microsoft ActiveSync Help.ActiveSync software available at www.microsoft.com.Information on using programs on the MC55E0Tap Start – Help within the specific program.Service and WarrantyMC55E0 Regulatory GuideAvailable with MC55E0 and at www.zebra.com/support1. Remove battery.2. Lift rubber access door.3. Slide SIM card holder up to unlock.4. Lift SIM card holder.5. Carefully lift microSD card holder.6. Insert microSD card into card holder.NOTE :Proper position of the microSD card — the card connector (i.e., gold contacts) should be facing out as shown.7. Close the microSD card holder.8. Close the SIM card holder.9. Slide the SIM card holder down to lock into place.10. Close rubber access door.11. Replace battery.1. Tap Start > Pictures & Videos > Camera.2. Point the MC55E0 at an object.3. Press the Enter button.4. Hold MC55E0 still until “Shutter Sound” is heard.SIM Card HoldermicroSD Card HolderRubber Access DoorDATA CAPTURE OPTIONSVehicle CradleTrigger HandleMagnetic Stripe ReaderMORE INFORMATION© 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.DRAFT

Navigation menu