Zebra Technologies MC55E0 Enterprise Digital Assistant User Manual QSG
Zebra Technologies Corporation Enterprise Digital Assistant QSG
Contents
- 1. User Manual QSG
- 2. User Manual Regulatory
User Manual QSG
MC55E0
1
2
6
11
5
8
1
2
3
7
9
10
7
3
4
3
1
2
3
4
32
51
2
3
43
5
7
2
6
8
86
10
9
10 9
12
13
14
17
16
18
20
15
19
21
22
Create a Partnership
Install Synchronization Software
Communicate with Host
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 Power Button
5 I/O Connector
6 Keypad
Note 1: To reset the MC55, press and hold the Power button for five (5) seconds.
FEATURES
COMMUNICATIONBATTERY INSTALLATION
Numeric Keypad Alpha-Numeric Keypad
CHARGING
Download ActiveSync
®
or Windows Mobile Device Center from
http://www.microsoft.com and follow the instructions to install the
software onto the host computer.
Follow the on-screen instructions to establish a connection between the MC55
and the host computer.
Blue Key
Use this key to access function keys shown on the keypad
in blue.
>
Orange Key
Use this key to access the secondary layer of characters
and actions.
>
>
>
>
>
Press the Blue key once to activate this state
temporarily, followed by another key.
Press the Blue key twice to lock this state.
Press the Blue key a third time to unlock.
Press the Orange key once to activate this state
temporarily, followed by another key.
Press the Orange key twice to lock this state.
Press the Orange key a third time to unlock.
Notifications
Charging/Battery Status LED:
Scan/Decode LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
Red: Scanning active
Green: Good Decode
Scan/Decode
Charging/Battery Status
Insert the Battery
1. Insert the battery, bottom first, into the battery compartment.
2. Press down on the battery until the battery latch snaps into place.
3. Replace the handstrap.
Charge the MC55
Charge the Battery
Slow Blinking Amber = Charging
Charging/Battery Status LED
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
Note: The 3600 mAh battery charges in less than six hours.
Use the Four-slot Battery Charger
to charge batteries separately.
Note: Remove protective shipping film that covers the touch screen, exit window and camera
window before using.
Press the Orange key once to lock the keypad into
Alpha state.
Press the Orange key a second time to return to the
normal state.
Press the Blue key once to activate this state,
followed by another key.
Blue Key
>
Orange Key
Use this key to access the secondary layer of
characters.
>
>
Use the Single-slot cradles (USB or
Ethernet/Modem/USB), Four-slot cradles
(Charge Only or Ethernet) or cables to
charge the battery in the MC55.
You can also charge a spare battery using
the Single-slot cradle.
12 Handstrap
13 Battery
14 Battery Latch
15 Camera Flash (optional)
16 Camera (optional)
17 Exit Window (see Data Capture Options)
4 (Note 1)
18 Tether
19 Scan/Action Button
20 Action Button
21 Stylus
22 Speaker
7 Scan/Action Button
8 Touch Screen
(with screen protector)
9 Scan/Decode LED
10 Charging/Battery
Status LED
11 Not Used
Quick Start Guide
Use this key to access function keys shown on the
keypad in blue.
3
DRAFT
www.zebra.com/MC55
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
AVOID EXTREME
WRIST ANGLES
Screen Protector Charge Only Cable
Zebra recommends the continued use of a screen
protector to minimize wear and tear. Screen
protectors enhance the usability and durability of
touch screen displays. Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device’s screen looking like new
• Quick and easy installation.
Not using a screen protector can affect your warranty coverage. An initial
screen protector is already applied to your MC55E0. Contact your local account
manager or Zebra for more information and purchasing details. Part number:
KT-67525-01R Screen Protector 3/pk.
MN-003059-01 Rev. A — August 2017
AVOID EXTREME WRIST ANGLES
MicroSD Card Installation
ACCESSORIES
Auto Charge Cable
USB/Charge Cable
Four-slot Battery Charger
Single-slot USB Cradle
Single-slot Ethernet/Modem/USB Cradle
Vehicle Holder
Four-slot Charge Only Cradle
Four-slot Ethernet Cradle
Imaging Camera Decode
Camera Photo
1. Launch a bar code reading application on the
MC55E0.
2. Position the MC55E0 toward the bar code.
3. Press the Scan button.
4. In the image window align the red target over
the bar code. When the MC55E0 decodes the
bar code the Scan/Decode LED light green and
a beep sounds.
5. Release the Scan button.
Setting up, using and troubleshooting the MC55E0
MC55E0 User Guide and Integrator Guide
Software Upgrades
Available at: www.zebra.com/support
Additional Software
Check Zebra web site for approved applications.
www.zebra.com/mc55
Connecting and synchronizing with the host computer
ActiveSync® Help on the host computer. To view help, start ActiveSync®,
Click Help - Microsoft ActiveSync Help.
ActiveSync software available at www.microsoft.com.
Information on using programs on the MC55E0
Tap Start – Help within the specific program.
Service and Warranty
MC55E0 Regulatory Guide
Available with MC55E0 and at www.zebra.com/support
1. Remove battery.
2. Lift rubber access door.
3. Slide SIM card holder up to unlock.
4. Lift SIM card holder.
5. Carefully lift microSD card holder.
6. Insert microSD card into card holder.
NOTE :
Proper position of the microSD card — the card
connector (i.e., gold contacts) should be facing out as
shown.
7. Close the microSD card holder.
8. Close the SIM card holder.
9. Slide the SIM card holder down to lock into place.
10. Close rubber access door.
11. Replace battery.
1. Tap Start > Pictures & Videos > Camera.
2. Point the MC55E0 at an object.
3. Press the Enter button.
4. Hold MC55E0 still until “Shutter Sound” is
heard.
SIM Card Holder
microSD Card Holder
Rubber Access Door
DATA CAPTURE OPTIONS
Vehicle Cradle
Trigger Handle
Magnetic Stripe Reader
MORE INFORMATION
© 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized
Zebra head are trademarks of ZIH Corp, registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners.
DRAFT