Zebra Technologies MC92N0 Mobile Computer User Manual

Zebra Technologies Corporation Mobile Computer

User Manual (Statements) rev.pdf

MC92N0-G SERIES
REGULATORY GUIDE
Zebra reserves the right to make changes to any product to improve reliability,
function, or design. Zebra does not assume any product liability arising out of, or
in connection with, the application or use of any product, circuit, or application
described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to
any combination, system, apparatus, machine, material, method, or process in
which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment,
they will contact the Zebra Global Customer Support at
http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in
many jurisdictions worldwide. All other trademarks are the property of their
respective owners.
© 2015 ZIH Corp and/or its affiliates. All rights reserved.
72-161752-05 Revision A — April 2015
Regulatory Information
This guide applies to the following Model Number: MC92N0.
All Zebra devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
(EN) Local language translations are available at the following website:
http://www.zebra.com/support
(BP) Documentos traduzidos podem ser encontrados no site:
http://www.zebra.com/support
(DE) Übersetzungen in die Landessprache sind auf der folgenden Website
verfügbar: http://www.zebra.com/support
(ES) Las traducciones en diferentes idiomas están disponibles en el sitio Web
siguiente: http://www.zebra.com/support
(FR) Les versions traduites des manuels sont disponibles à l'adresse suivante:
http://www.zebra.com/support
(HR) /RNDOQLMH]LNSUHYRÓHQMHMHVXUDVSRORŀLYDWVOLMHGHÉH website:
http://www.zebra.com/support
(IT) Le traduzioni nelle lingue locali sono disponibili presso il sito Web:
http://www.zebra.com/support
-3⚓岏崭ቊቑ㍔⫀ቒᇬⅴₚቑ㆙䯍:HEኒኁእቊሷ䭉崜ሲቃሸሧᇭ
http://www.zebra.com/support
.2뾹덵꽭꽩ꈑ꘽꾢鷑ꓭ꫑鱉 http://www.zebra.com/support꾅꫑쀊넭뼕ꯍ
넽걪鱽鲙
(RU) ̫͕͚͓͔͙͇͑͌͝͏ͥ͔͇͚͋͗͊͏͜͎͇ͦ͑͢͜͓͘͔͇͉͈͌͇͙͐͌͘: http://www.zebra.com/
support
TC㌷♾ⅴ⦷ₚᗼ偁䵨♥㈦䠅⦿崭岏䤓劊巾᧶http://www.zebra.com/support
SC㌷♾⅝ₚ⒦几䵨噆㈦㦻⦿▥幠㠖᧶http://www.zebra.com/support
(TR) <HUHOGLO©HYLULOHULDġDáóGDNLZHEVLWHVLQGHQEXOXQDELOLU:
http://www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved by
Zebra, could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 50°C.
Radio Modules
The device contain approved radio module(s). These module(s) are identified
below.
Zebra radio module supporting WLAN 802.11 a/b/g/n and Bluetooth.
Type(s): 21-148603-0B
Bluetooth®Wireless Technology
This is an approved Bluetooth® product. For more information or to view End
Product Listing, please visit https://www.bluetooth.org/tpg/listings,cfm
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying
the radio(s) is/are approved for use in the following countries: United States,
Canada, Japan, China, S. Korea, Australia, and Europe.
Please refer to the Zebra Declaration of Conformity (DoC) for details of other
country markings. This is available at www.zebra.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
Operation of the device without regulatory approval is illegal.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which
will ensure the product operates on the correct channels for the particular country
of use.
Ad-Hoc Operation (2.4 GHz Band)
Ad-Hoc operation is limited to Channels 1-11 (2412-2462 MHz).
Frequency of Operation – IC
Industry Canada Statement
Caution: The device for the band 5150-5250 MHz is only for indoor usage to
reduce potential for harmful interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users (meaning they have priority) of
5250-5350 MHz and 5650-5850 MHz and these radars could cause interference
and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est
réservé uniquement pour une utilisation à l'intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-
5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
Health and Safety Recommendations
Ergonomic Recommendations
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or
flipping through your address book takes attention away from your primary
responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention to driving.
Check the laws and regulations on the use of wireless devices in the areas where
you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend
conversations that have the potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in
the US, and 1-1-2 in Europe) or other local emergency number in the case of
fire, traffic accident or medical emergencies. Remember, it is a free call on your
wireless phone! The call can be made regardless of any security codes and
depending on a network, with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in Europe) or
other local emergency number, as you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call roadside assistance or other
special non-emergency wireless number.
“The wireless industry reminds you to use your device / phone safely when
driving”.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless
devices.
Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices
in fuel depots, chemical plants etc. and areas where the air contains chemicals or
particles (such as grain, dust, or metal powders) and any other area where you
would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or
airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline
staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical
electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in
hospitals, clinics or healthcare facilities. These requests are designed to prevent
possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be
maintained between a handheld wireless device and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are
consistent with independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
•
Should ALWAYS keep the device more than 15cm (6 inches) from their
pacemaker when turned ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to minimise the potential for
interference.
•
If you have any reason to suspect that interference is taking place, turn OFF
your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to
determine if the operation of your wireless product may interfere with the medical
device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human
exposure to electromagnetic fields from radio devices. For information on
“International” human exposure to electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices - see
http://www.zebra.com/corporateresponsibility, located under Wireless
Communications and Health.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only Zebra tested and
approved belt-clips, holsters, and similar accessories to ensure EU Compliance.
US and Canada
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for
this transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
This device was tested for typical body-worn operation. Use only Zebra tested and
approved belt-clips, holsters, and similar accessories to ensure FCC Compliance.
The use of third-party belt-clips, holsters, and similar accessories may not comply
with FCC RF exposure compliance requirements, and should be avoided.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007, EN60825-1: 2007 and IEC60825-1
(Ed. 2.0)
The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
LED Devices
Complies with IEC/EN60825-1:2001 & IEC/EN62471:2006.
Scanner Labeling
Labels Read:
1. CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT
EYE EXPOSURE.
2. CAUTION - CLASS 2 LED LIGHT WHEN OPEN. DO NOT STARE INTO
THE BEAM.
3. COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24,
2007 AND IEC/EN60825-1:2001, 2007 & IEC/EN62471:2006.
4. LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2 LASER/LED
PRODUCT.
Power Supply
Use ONLY an approved UL LISTED ITE (IEC/EN 60950-1, LPS/SELV) power
supply with electrical ratings: Output 12 VDC, min 3.33 A, with a maximum
ambient temperature of at least 50 °C. Use of alternative power supply will
invalidate any approvals given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration)
requires dry battery producing or importing firms
in accordance with Article 15 of the Waste
Disposal Act are required to indicate the
recycling marks on the batteries used in sales,
giveaway or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have battery charging
capability are approved for use with the following battery models: 21-65587-03
(7.4 Vdc, 2200 mAh).
Zebra rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations to how long a battery can operate or be stored
before needing replacement. Many factors affect the actual life cycle of a battery
pack, such as heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in
overall battery quality may occur. Store batteries at half of full charge in a dry, cool
place, removed from the equipment to prevent loss of capacity, rusting of metallic
parts and electrolyte leakage. When storing batteries for one year or longer, the
charge level should be verified at least once a year and charged to half of full
charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if the
battery was purchased separately or included as part of the mobile computer or
bar code scanner. For more information on Zebra batteries, please visit:
http://www.zebra.com/batterybasics
Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris and
combustible materials or chemicals. Particular care should be taken where the
device is charged in a non commercial environment.
•
Follow battery usage, storage, and charging guidelines found in the user's
guide.
•
Improper battery use may result in a fire, explosion, or other hazard.
•
To charge the mobile device battery, the battery and charger temperatures
must be between +32 ºF and +104 ºF (0 ºC and +40 ºC)
•
Do not use incompatible batteries and chargers. Use of an incompatible
battery or charger may present a risk of fire, explosion, leakage, or other
hazard. If you have any questions about the compatibility of a battery or a
charger, contact Zebra support.
•
For devices that utilize a USB port as a charging source, the device shall only
be connected to products that bear the USB-IF logo or have completed the
USB-IF compliance program.
•
Do not disassemble or open, crush, bend or deform, puncture, or shred.
•
Severe impact from dropping any battery-operated device on a hard surface
could cause the battery to overheat.
•
Do not short circuit a battery or allow metallic or conductive objects to contact
the battery terminals.
•
Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, or expose to fire,
explosion, or other hazard.
•
Do not leave or store the equipment in or near areas that might get very hot,
such as in a parked vehicle or near a radiator or other heat source. Do not
place battery into a microwave oven or dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose of used re-chargeable
batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has been swallowed.
•
In the event of a battery leak, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the affected area with large
amounts of water and seek medical advice.
•
If you suspect damage to your equipment or battery, contact Zebra support to
arrange for inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices (hearing aids
and cochlear implants), users may detect a buzzing, humming, or whining noise.
Some hearing devices are more immune than others to this interference noise,
and wireless devices also vary in the amount of interference they generate. In the
event of interference you may want to consult your hearing aid supplier to discuss
solutions.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Radio Frequency Interference Requirements- Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:
•
Restricted Band 5.60 – 5.65 GHz
This device complies with RSS 210 of Industry Canada. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement indésirable.
Label Marking: The Term “IC:” before the radio certification only signifies that
Industry Canada technical specifications were met.
CAUTION Only use Zebra approved and UL Listed accessories, battery
packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or
batteries. All components must be dry before connecting to an
external power source.
CAUTION In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are adhering
to your company's safety programs to prevent employee injury.
CAUTION Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
1
2
3
4
Review Copy
Marking and European Economic Area (EEA)
The use of 2.4GHz RLAN’s, for use through the EEA, have the following
restrictions:
•
Maximum radiated transmit power of 100 mW EIRP in the frequency range
2.400 - 2.4835 GHz.
Bluetooth® Wireless Technology for use through the EEA has the following
restrictions:
•
Maximum radiated transmit power of 100mW EIRP in the frequency range
2.400 - 2.4835 GHz
Statement of Compliance
Zebra hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/
EU. A Declaration of Conformity may be obtained from http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5GHz RLAN’s in Australia is restricted in the following band 5.50 –
5.65GHz.
Brazil
Declarações Regulamentares para MC92N0 - Brasil
Nota: “A marca de certificação se aplica ao Transceptor, modelo MC92N0. Este
equipamento opera em caráter secundário, isto é, não tem direito a proteção
contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode
causar interferência a sistemas operando em caráter primário.”
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Este produto está homologado pela Anatel, de acordo com os procedimentos
regulamentados pela Resolução n°242/2000 e atende aos requisitos técnicos
aplicados, incluindo os limites de exposição da Taxa de Absorção Específica
referente a campos elétricos, magnéticos e eletromagnéticos de radiofrequência,
de acordo com as Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de exposição à
radiofrequência quando posicionado pelo menos 0 centímetros de distância do
corpo. Para maiores informações, consulte o site da Anatel.
Chile
“Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.”
China
Mexico
Restrict Frequency Range to: 2.450 – 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
Taiwan
咉䋲
⇝┮䘖榊㽱懊⺓㊶榊㳮丰䚕戵㽤
䶻◐ℛ㬬
倢⨚㆞崜巘⚗㫋⃚⇝┮䘖⺓櫊榊㳮᧨槭倢峀♾᧨⏻⚇ᇬ⟕壮㒥∎䞷劔⧖ₜ㈦㝔呹帙
㦃櫊䘖ᇬ┯⮶┮䘖㒥帙㦃☮岼岗⃚䔈㊶♙┮厌ᇭ
䶻◐⥪㬬
⇝┮䘖⺓櫊榊㳮⃚∎䞷ₜ㈦㈀檎歪咹⸘⏷♙㄁㞍⚗㽤抩≰᧷倢䤋䚍㦘㄁㞍䚍廰㣑᧨
㑘䵚☂⋫䞷᧨₵㟈⠓咂䎰㄁㞍㣑㡈㈦儋儛∎䞷ᇭ
ⓜ檔⚗㽤抩≰᧨㖖∬榊≰尞⸩⇫㯼⃚䎰偩榊抩≰ᇭ
⇝┮䘖⺓櫊榊㳮檗㉜♦⚗㽤抩≰㒥ぴ㯼ᇬ䱠⸇♙携䣑䞷榊㽱懊⺓㊶榊㳮岼⌨⃚㄁
㞍ᇭ
⦷ 䱼忺櫊ヅ⏶㝜⇫⃚䎰偩彖岙⍂懇岼⌨᧨棟㡋⸳⏶∎䞷ᇭ
S. Korea
鲮뼩ꓩ꫕꫙ꟹ鱉끩끞닆놹볁뿱겕閵鱚ꫦ넩넽넁
鲮뼩 ꓩ꫕꫙ꟹ 鱉놹볁뿱 겕 閵鱚ꫦ넩 넽냱ꕵꈑ 넭ꐺ껽놹隱 隵ꇝ鷑 ꫑ꟹ걙鱉 뼕 ꯍ
꽻걪鱽鲙 
Ukraine
Дане обладнання відповідає вимогам технічного регламенту № 1057, 2008 на
обмеження щодо використання деяких небезпечних речовин в електричних
та електронних пристроях.
Thailand
ࡳ࠻࡚࡮ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴ࡜ࡧࡤ࡯ࡒ࠸࡚ࡊࡿࡐ࡬ࡼࡘ࡬࠻࡞ࡩࡘࡡࡤࡋ࠻࡜ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ 
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
Waste Electrical and Electronic Equipment
(WEEE)
English: For EU Customers: All products at the end of their life must be returned to
Zebra for recycling. For information on how to return product, please go to: http://
www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits en fin de cycle de vie
doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le
retour de produits, consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a
Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información
sobre cómo devolver un producto, visite: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти
трябва да се връщат на Zebra за рециклиране. За информация относно
връщането на продукти, моля отидете на адрес: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer
Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur
Rücksendung von Produkten finden Sie unter
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo
di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per
informazioni sulle modalità di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser
devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver o
produto, visite: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun
levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y
zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów
znajduj¹ siê na stronie internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti
vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na
webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise
kohta külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.zebra.com/weee weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste
returneras till Zebra för återvinning. Information om hur du returnerar produkten finns
på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava
kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen
palauttamisesta on osoitteessa http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de
er udtjent. Læs oplysningerne om returnering af produkter på:
http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους,
πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες
σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu
tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif
għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de
funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre
returnarea produsului, accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti
podjetju Zebra za reciklažo. Za informacije o vračilu izdelka obiščite:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby
ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení
výrobkov nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti
grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā
atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu
Zebra, lūdzu, skatiet: http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için
Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu
adresi ziyaret edin: http://www.zebra.com/weee.
End-user License Agreement (Windows Embedded
Handheld Only)
These license terms are an agreement between you and Symbol Technologies,
Inc. (“Company”). Please read them. They apply to the software included on this
device. The software also includes any separate media on which you received the
software.
The software on this device includes software licensed by Company from
Microsoft Corporation or its affiliate.
The terms also apply to any:
• updates,
• supplements,
• Internet-based services, and
• support services
for this software, unless other terms accompany those items. If so, those terms
apply.
As described below, using some features also operates as your consent to the
transmission of certain standard computer information for Internet-based services.
By using the software, including use on this device, you accept these terms. If you
do not accept them, do not use the device or software. Instead, contact Company
to determine its return policy for a refund or credit.
WARNING: If the software contains voice operated technologies, then operating
this software requires user attention. Diverting attention away from the road while
driving can possibly cause an accident or other serious consequence. Even
occasional, short diversions of attention can be dangerous if your attention is
diverted away from your driving task at a critical time. Company and Microsoft
make no representations, warranties or other determinations that ANY use of this
software is legal, safe, or in any manner recommended or intended while driving
or otherwise operating a motor vehicle.
If you comply with these license terms, you have the rights below.
1. USE RIGHTS.
You may use the software on the device with which you acquired the software.
2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.
a.Specific Use. Company designed this device for a specific use. You may only
use the software for that use.
b.Included Microsoft Programs and Additional Required Licenses. Except
as provided below, these license terms apply to all Microsoft programs
included with the software. If the license terms with any of those programs
give you other rights that do not expressly conflict with these license terms,
you also have those rights.
i. This agreement does not grant you any rights with respect to the Windows
Mobile Device Center, Microsoft ActiveSync or Microsoft Outlook 2007 Trial
which are subject to the licenses accompanying those items.
c.Speech Recognition. If the software includes speech recognition
component(s), you understand that speech recognition is an inherently
statistical process and that recognition errors are inherent in the process.
Neither Company nor Microsoft or their suppliers shall be liable for any
damages arising out of errors in the speech recognition process.
d.Phone Functionality. If the device software includes phone functionality, all
or certain portions of the device software may be inoperable if you do not
have and maintain a service account with a wireless telecommunication
carrier (“Mobile Operator”), or if the Mobile Operator’s network is not
operating or configured to operate with the device.
3. SCOPE OF LICENSE. The software is licensed, not sold. This agreement only
gives you some rights to use the software. Company and Microsoft reserve all
other rights. Unless applicable law gives you more rights despite this limitation,
you may use the software only as expressly permitted in this agreement. In doing
so, you must comply with any technical limitations in the software that allow you to
use it only in certain ways. You may not:
• work around any technical limitations in the software;
• reverse engineer, decompile or disassemble the software;
• make more copies of the software than specified in this agreement;
• publish the software for others to copy;
• rent, lease or lend the software; or
• use the software for commercial software hosting services.
Except as expressly provided in this agreement, rights to access the software on
this device do not give you any right to implement Microsoft patents or other
Microsoft intellectual property in software or devices that access this device.
You may use remote access technologies in the software such as Remote
Desktop Mobile to access the software remotely from a computer or server. You
are responsible for obtaining any licenses required for use of the protocols to
access other software.
4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services
with the software. Microsoft may change or cancel them at any time.
a.Consent for Internet-Based Services. The software features described
below connect to Microsoft or service provider computer systems over the
Internet. In some cases, you will not receive a separate notice when they
connect. You may switch off some of these features or not use them. For
more information about these features, visit http://go.microsoft.com/fwlink/
?LinkId=81931.
By using these features, you consent to the transmission of this
information. Microsoft does not use the information to identify or contact you.
Device Information. The following features use Internet protocols, which send
to the appropriate systems device information, such as your Internet protocol
address, the type of operating system, browser and name and version of the
software you are using, and the language code of the device where you
installed the software. Microsoft uses this information to make the Internet-
based services available to you.
•Windows Mobile Update Feature. The Windows Mobile Update feature
provides you the ability to obtain and install software updates on your device
if updates are available. You may choose not to use this feature. Company
and/or your Mobile Operator may not support this feature or an update for
your device.
•Windows Media Digital Rights Management. Content owners use
Windows Media digital rights management technology (WMDRM) to protect
their intellectual property, including copyrights. This software and third party
software use WMDRM to play and copy WMDRM-protected content. If the
software fails to protect the content, content owners may ask Microsoft to
revoke the software’s ability to use WMDRM to play or copy protected
content. Revocation does not affect other content. When you download
licenses for protected content, you agree that Microsoft may include a
revocation list with the licenses. Content owners may require you to upgrade
WMDRM to access their content. Microsoft software that includes WMDRM
will ask for your consent prior to the upgrade. If you decline an upgrade, you
will not be able to access content that requires the upgrade.
b.Misuse of Internet-based Services. You may not use these services in any
way that could harm them or impair anyone else’s use of them. You may not
use the services to try to gain unauthorized access to any service, data,
account or network by any means.
5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The software may
include MPEG-4 visual decoding technology. This technology is a format for data
compression of video information. MPEG LA, L.L.C. requires this notice:
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE
MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE
DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY
AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY
ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE
ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY
LICENSED BY MPEG LA, L.L.C.
If you have questions about the MPEG-4 visual standard, please contact
MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, CO 80206;
www.mpegla.com.
6. DIGITAL CERTIFICATES. The software uses digital certificates in X.509
format. These digital certificates are used for authentication.
7. CONNECTIVITY SOFTWARE. Your device package may include Windows
Mobile Device Center or Microsoft ActiveSync software. If it is included, then you
may install and use it in accordance with the license terms that are provided with
it. If no license terms are provided, then you may install and use only one (1) copy
of the software on a single computer.
8. NETWORK ACCESS. If you are using a network, such as an employer
network, the network administrator may limit features or functionality on your
device.
9. PRODUCT SUPPORT. Contact Company for support options. Refer to the
support number provided with the device.
10. LINKS TO THIRD PARTY WEBSITES. If the software provides links to third
party websites, those links are provided to you only as a convenience, and the
inclusion of any link does not imply an endorsement of the third party website by
Microsoft.
11. BACKUP COPY. You may make one backup copy of the software. You may
use it only to reinstall the software on the device.
12. PROOF OF LICENSE. If you acquired the software on the device, or on a disc
or other media, a genuine Certificate of Authenticity label with a genuine copy of
the software identifies licensed software. To be valid, this label must be affixed to
the device, or included on or in Company’s software packaging. If you receive the
label separately, it is not valid. You should keep the label on the device or
packaging to prove that you are licensed to use the software. To identify genuine
Microsoft software, see http://www.howtotell.com.
13. TRANSFER TO A THIRD PARTY. You may transfer the software only with the
device, the Certificate of Authenticity label, and these license terms directly to a
third party. Before the transfer, that party must agree that these license terms
apply to the transfer and use of the software. You may not retain any copies of the
software including the backup copy.
14. NOT FAULT TOLERANT. The software is not fault tolerant. Company installed
the software on the device and is responsible for how it operates on the device.
15. RESTRICTED USE. The Microsoft software was designed for systems that do
not require fail-safe performance. You may not use the Microsoft software in any
device or system in which a malfunction of the software would result in
foreseeable risk of injury or death to any person. This includes operation of
nuclear facilities, aircraft navigation or communication systems and air traffic
control.
16. NO WARRANTIES FOR THE SOFTWARE. The software is provided “as is”.
You bear all risks of using it. Microsoft gives no express warranties, guarantees or
conditions. Any warranties you receive regarding the device or the software do not
originate from, and are not binding on, Microsoft or its affiliates. When allowed by
your local laws, Company and Microsoft exclude implied warranties of
merchantability, fitness for a particular purpose and non-infringement.
17. LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates
only direct damages up to fifty U.S. Dollars (U.S. $50.00), or equivalent in local
currency. You cannot recover any other damages, including consequential, lost
profits, special, indirect or incidental damages.
This limitation applies to:
• anything related to the software, services, content (including code) on third
party internet sites, or third party programs, and
• claims for breach of contract, breach of warranty, guarantee or condition,
strict liability, negligence, or other tort to the extent permitted by applicable
law.
It also applies even if Microsoft should have been aware of the possibility of the
damages. The above limitation may not apply to you because your country may
not allow the exclusion or limitation of incidental, consequential or other damages.
18. EXPORT RESTRICTIONS. The software is subject to United States export
laws and regulations. You must comply with all domestic and international export
laws and regulations that apply to the software. These laws include restrictions on
destinations, end users and end use. For additional information, see
www.microsoft.com/exporting.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the time
of device purchase in order to keep the device operating at peak performance
levels. To confirm that your Zebra device has the latest entitled software available
at the time of purchase, visit http://www.zebra.com/support.
Check for the latest software from Support > Products, or search for the device
and select Support > Software Downloads.
If your device does not have the latest entitled software as of your device
purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you
include the following essential device information:
•
Model number
•
Serial number
•
Proof of purchase
•
Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest version of
software, as of the date you purchased your device, you will receive an e-mail
containing a link directing you to a Zebra Web site to download the appropriate
software.
CMM Disclosure
㦻嫷㫋∬㗽 SJ/T 11364 䤓屓⸩冥Ⓟᇭ
2 㺞⽰䈛ᴿᇩ⢟䍞൞䈛䜞Ԭᡶᴿൽ䍞ᶆᯏѣⲺ੡䠅ൽ൞*%7㿺ᇐⲺ䲆䠅
㾷≸ԛсȾ
; 㺞⽰䈛ᴿᇩ⢟䍞㠩ቇ൞䈛䜞ԬⲺḆжൽ䍞ᶆᯏѣⲺ੡䠅䎻࠰*%7㿺ᇐⲺ
䲆䠅㾷≸ȾԷѐਥ൞↚༺θṯᦤᇔ䱻᛻߫ሯр㺞ѣᢉćhĈⲺᢶᵥ৕ഖ䘑㺂䘑
ж↛䈪᱄Ⱦε
This table was created to comply with China RoHS requirements.
ሶቑ孔函ቒᇬ㍔⫀⑵䚕孔函䷘榊㽱椫⹂呹⃊尞Ⓟ◣巿↩᧤ᨒ᧿᧿ᨅ᧥ቑ⪉䄥቎
⪉ቈሲኌ዆ኖ % ㍔⫀㔏嫢孔函ቊሼᇭሶቑ孔函ቒᇬ⹅ㄼ䜿⬒ቊ∎䞷ሼቮሶቋት
䥽䤓ቋሺ቉ሧቡሼሯᇬሶቑ孔函ሯ዆ንኇቧኣዉኰንዄዐ♦≰㳮቎扠㘴ሺ቉∎
䞷ሸቯቮቋᇬ♦≰椫⹂ትㆤሰ怆ሶሼሶቋሯሥቭቡሼᇭ ♥㔀崻㢝㦇቎㈢ቆ቉
㷲ሺሧ♥ቭ㔀ሧትሺ቉ₚሸሧᇭ
韥눺ꙹ ꩡ끞녅껽驩ꓭ
% 鞾韥韥
閵뇊끞 ꗞꭖ뭪겕韥녅녡 넩韥韥鱉閵뇊끞 % 鞾 놹녅볁놶뼞韥韥ꈑ꫑늱ꈑ
閵뇊꾅꫑ꩡ끞뼍鱉阸냹ꑞ놶냱ꈑ뼍ꐥꑝ麕덵꾢꾅꫑
ꩡ끞뼕ꯍ넽걪鱽鲙 
⚗㫋幐
䜞Ԭ੃〦
(Parts)
ᴿᇩ⢟䍞
䫻
(Pb) ⊔
(Hg) 䭿
(Cd)
ޣԭ䬢
(Cr(VI))
ཐ⓪㚊㤥
(PBB) ཐ⓪ӂ㤥䟐
(PBDE)
䠇ኔ䜞Ԭ
(Metal Parts)
XOO O O O
⭫䐥⁗ඍ
(Circuit Modules)
XOO O O O
⭫㔼਀⭫㔼㓺Ԭ
(Cables and Cable
Assemblies)
OOO O O O
ງᯏૂ㚐ਾ⢟䜞Ԭ
(Plastic and Polymeric
Parts)
OOO O O O
ݿᆜૂݿᆜ㓺Ԭ
(Optics and Optical
Components)
OOX O O O
⭫⊖
(Batteries)
OOO O O O
Review Copy

Navigation menu