Zebra Technologies MD-ZBR4WA Zebra Embedded Bluetooth 2.0 radio User Manual UMAN MZS 2
Zebra Technologies Corporation Zebra Embedded Bluetooth 2.0 radio UMAN MZS 2
Contents
- 1. Users Manual
- 2. Host User Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 894425 |
| Application ID | kZjT1Q8fc6Xx9J4yfeWKTw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 159.3kB (1991224 bits) |
| Date Submitted | 2008-01-25 00:00:00 |
| Date Available | 2008-01-25 00:00:00 |
| Creation Date | 2005-05-23 14:08:24 |
| Producing Software | Adobe PDF Library 6.0 |
| Document Lastmod | 2006-09-25 08:08:59 |
| Document Title | UMAN_MZS_2 |
| Document Creator | Adobe InDesign CS (3.0.1) |
| Document Author: | Zebra Technologies International, LLC |
UMAN-MZS-001 rev. A September, 2006 Table of Contents Proprietary Statements .............................................................. 5 Document Conventions .............................................................. 7 Introduction to the MZ Series .................................................... 8 Unpacking and Inspection ............................................................... 8 Reporting Damage ........................................................................... 8 MZ Series Introduction ................................................................... 9 Getting Ready to Print .............................................................. 10 Battery ............................................................................................. 10 Installing the Battery .................................................................................. 10 MZ Series Quad Docking Station .............................................................. 13 Battery Safety ............................................................................................. 14 Charger Safety ............................................................................................ 14 Charging the Battery .................................................................................. 11 Loading the Media (All models) .................................................... 15 Operator Controls .......................................................................... 17 Verify the Printer Is Working ......................................................... 19 Printing a Configuration Label ................................................................... 19 Connecting the Printer ................................................................... 19 Cable Communication................................................................................ 20 IR Communications .................................................................................... 21 Wireless Communications with Bluetooth™ ............................................. 22 Bluetooth Networking Overview ............................................................... 22 WLAN Overview ............................................................................. 23 Setting Up the Software............................................................................. 23 Radio Regulatory Information .................................................. 24 Zebra Bluetooth Radios MZ-ZBR3 ............................................................. 24 WLAN Module Using 802.11b/g Radio ..................................................... 25 Wearing the Printer ................................................................... 27 Belt Clip ....................................................................................................... 27 Adjustable Shoulder Strap......................................................................... 28 Preventive Maintenance ........................................................... 29 Extending Battery Life ................................................................... 29 General Cleaning Instructions ....................................................... 30 Troubleshooting......................................................................... 33 Interpreting Indicators ................................................................... 33 Troubleshooting Topics ................................................................. 33 Resetting an MZ Series Printer ..................................................... 34 Troubleshooting Tests ................................................................... 35 Printing a Configuration Label ................................................................... 35 Communications Diagnostics .................................................................... 35 Calling Technical Support .......................................................................... 36 Specifications.............................................................................40 Printing Specifications .............................................................................. 40 Memory and Communications Specifications, MZ series ....................... 40 Media Specifications .................................................................................. 40 Font and Bar Code Specifications for MZ Series ...................................... 41 USB Communications Port ........................................................................ 42 Physical, Environmental and Electrical Specifications ............................. 42 MZ Series Accessories .............................................................................. 44 continued MZ Series User Guide Appendix A .................................................................................45 USB Interface Cables ................................................................................. 45 Cable .......................................................................................................... 45 More Interface Cables ............................................................................... 45 Appendix B Media Supplies ..........................................................46 Appendix C Maintenance Supplies .................................................46 Appendix D ................................................................................. 47 Battery Disposal ......................................................................................... 47 Product Disposal ........................................................................................ 47 Appendix E .................................................................................48 Product Support ......................................................................................... 48 Product Support Contacts ......................................................................... 49 Appendix F Using zebra.com ......................................................... 50 Index............................................................................................ 53 Patent Numbers ......................................................................... 55 MZ Series User Guide Proprietary Statements This manual contains proprietary information of Zebra Technologies Corporation. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the expressed written permission of Zebra Technologies Corporation. Product Improvements Since continuous product improvement is a policy of Zebra Technologies Corporation, all specifications and signs are subject to change without notice. FCC Compliance Statement NOTE: This equipment has been tested and found to comply with the limits or a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet or circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Exposure to Radio Frequency radiation. To conform to FCC RF exposure requirements this device shall be used in accordance with the operating conditions and instructions listed in this manual. Note that there are several radio options available with this printer. Additional regulatory information is contained in later sections devoted to each radio individually. NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure compliance. Changes or modifications to this unit not expressly approved by Zebra Technologies Corporation could void the user’s authority to operate this equipment. Canadian Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. “IC:” before the equipment certification number signifies that the Industry Canada technical specifications were met. It does not guarantee that the certified product will operate to the user’s satisfaction. Agency Approvals and Regulatory Information • Design certified by TUV • Canadian STD RSS-210 • EN60950: 2000 Safety Standard • C-Tick (Australia) Liability Disclaimer • FCC part 15 • EN55024:1998 European Immunity Standard • NOM/NYCE (Mexico) • EN55022:1998 Class B European Electromagnetic Radiation Standard Inasmuch as every effort has been made to supply accurate information in this manual, Zebra Technologies Corporation is not liable for any erroneous information or omissions. Zebra Technologies Corporation reserves the right to correct any such errors and disclaims liability resulting therefrom. No Liability for Consequential Damage In no event shall Zebra Technologies Corporation or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use of or the results of use of or inability to use such product, even if Zebra Technologies Corporation has been advised of the possibility of such damages. Because some states do not allow the exclusion of liability for consequential or incidental damages, the above limitation may not apply to you. MZ Series User Guide continued Copyrights The copyrights in this manual and the label print engine described therein are owned by Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software in the label print engine may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. This product may contain ZPL®, ZPL II®, and ZebraLink tm programs; Element Energy Equalizer ® Circuit; E3®; and AGFA fonts. Software © ZIH Corp. All rights reserved worldwide. ZebraLink and all product names and numbers are trademarks, and Zebra, the Zebra logo, ZPL, ZPL II, Element Energy Equalizer Circuit, and E3 Circuit are registered trademarks of ZIH Corp. All rights reserved worldwide. Monotype®, Intellifont ® and UFST® are trademarks of Monotype Imaging, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. AndyTM , CG PalacioTM, CG Century SchoolbookTM, CG TriumvirateTM, CG TimesTM, Monotype Kai TM, Monotype MinchoTM and Monotype SungTM are trademarks of Monotype Imaging, Inc. and may be registered in some jurisdictions. HY Gothic Hangul TM is a trademark of Hanyang Systems, Inc. AngsanaTM is a trademark of Unity Progress Company (UPC) Limited. Andale®, Arial®, Book Antiqua®, Corsiva®, Gill Sans®, Sorts® and Times New Roman® are trademarks of The Monotype Corporation registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Century Gothic™, Bookman Old StyleTM and Century SchoolbookTM are trademarks of The Monotype Corporation and may be registered in certain jurisdictions. HGPGothicB is a trademark of the Ricoh company, Ltd. and may be registered in some jurisdictions. UniversTM is a trademark of Heidelberger Druckmaschinen AG, which may be registered in certain jurisdictions, exclusively licensed through Linotype Library GmbH, a wholly owned subsidiary of Heidelberger Druckmaschinen AG. Futura® is a trademark of Bauer Types SA registered in the United States Patent and Trademark Office and may be registered in some jurisdictions. TrueType® is a trademark of Apple Computer, Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. All other product names are the property of their respective owners. All other brand names, product names, or trademarks belong to their respective holders. © 2006 ZIH Corp. MZ Series User Guide Document Conventions The following conventions are used throughout this document to convey certain information: If you are viewing this guide online, click the underlined text to jump to a related Web site. Click on italic text (not underlined) to jump to that location in this manual.. Cautions, Important, and Note Caution • Warns you of the potential for electrostatic discharge. Caution • Warns you of a potential electric shock situation. Caution • Warns you of a situation where excessive heat could cause a burn Caution • Advises you that failure to take or avoid a specific action could result in physical harm to you. Caution • Advises you that failure to take or avoid a specific action could result in physical harm to the hardware. Important • Advises you of information that is essential to complete a task. Note • Indicates neutral or positive information that emphasizes or supplements important points of the main text. MZ Series User Guide Introduction to the MZ Series Thank you for choosing one of our Zebra® MZ™ series Mobile Printers. These rugged printers are sure to become productive and efficient additions to your workplace thanks to their innovative design. Because they are made by Zebra Technologies, you’re assured of world-class support for all of your bar code printers, software, and supplies. • This user’s guide gives you the information you will need to operate any MZ series printer. • The MZ series uses the CPCL programming language. To create and print labels using the CPCL language, refer to the Mobile Printer Programming Guide and our Label Vista™ label creation program which are both available on our Web site at www.zebra.com. Unpacking and Inspection Inspect the printer for possible shipping damage: • Check all exterior surfaces for damage. • Open the media cover (refer to “Loading the Media” in the Getting Ready to Print section) and inspect the media compartment for damage. In case shipping is required, save the carton and all packing material. Reporting Damage If you discover shipping damage: • Immediately notify and file a damage report with the shipping company. Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the printer and will not cover the repair of this damage under its warranty policy. • Keep the carton and all packing material for inspection. • Notify your authorized Zebra re-seller. MZ Series User Guide Figure 1: MZ Series Overview (MZ220 Illustrated) 14 13 12 11 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 15 Feed Switch Media Status Light USB Port Battery Charging Receptacle Media Sensor Media Cover Platen Printhead Latch Release Button Communications Status Indicator IR window Charge Status Indicator Power Switch Power Indicator Belt Clip Battery Door Latch Battery Compartment Cover Battery Pack External Charge Contacts 16 19 MZ Series User Guide 18 17 Getting Ready to Print Battery Installing the Battery Important • Batteries are shipped partially charged. Remove any protective packaging from new battery packs prior to use. Figure 2: Installing the Battery 1. Use a coin to rotate the Battery Compartment lock /4 turn as shown. 2. Remove the Battery Compartment Cover Battery Pack Note location of label 3. Plug the Battery Pack connector into the Printer. 4. Re-install the Battery Compartment Cover and rotate the lock back 1/4 turn to lock it in place . Ensure the battery leads are not pinched prior to replacing the battery cover. 10 MZ Series User Guide When the battery is first installed, the printer power and charge indicators should indicate the battery is not fully charged (see “Charging the Battery” below and “Operator Controls”). You must charge the battery fully before using the printer for the first time. To ensure maximum battery capacity, new batteries should go through two or three complete charge/discharge cycles when first put into service. Charging the Battery Preparing the Charger Power Supply Before charging the battery for the first time, you must prepare the Charger power Supply. Refer to Figure 3 Figure 3: Preparing the Charger Power Supply 1. Remove the power supply from its box. Remove and discard the shipping ring from the mains receptacle cavity. Shipping Ring Remove and discard Mains Adapter 2. Verify that the mains adapter shipped with your Printer is the correct one for your region. 3. Install the mains adapter into the Power Supply by hooking the top edge into the mains receptacle cavity, and rotating it until it snaps into place. 11 MZ Series User Guide continued Figure 4: Charging the Battery MZ Series Charger Power Supplyr Charger Jack Charging the battery Refer to Figure 4. 1. Plug the Charger into the appropriate A.C. wall receptacle. Then insert the charge cable into the printer’s charger jack. 2. The printer’s charger indicator will indicate the status of the charger as follows: • An amber light indicates the battery is charging, and that the battery is less than 90% charged. • A green light indicates the battery is fully charged. The battery is ready for use. Note • Use of the printer while charging will increase charge times. Note • These times are for completely discharged batteries. Approximate Charge Times : Battery 80% Charged: __ Hrs Battery Fully Charged: __Hrs. Battery packs which are only partially discharged will take less time to reach their charged state. Batteries which have reached 80% of their charge capacity may be used, however, it is recommended that you allow the batteries to reach a full charge to maintain maximum battery life. 12 MZ Series User Guide MZ Series Quad Docking Station The MZ series Quad Docking Station is designed to dock and charge up to four MZ series printers simultaneously. 1. Ensure that the Docking Station has been installed properly per its instruction manual. Ensure that the power supply is properly connected and its power indicator light is on. 2. Slide a printer into any one of the four docking bays as shown in Figure 5. The printer’s charge status indicator will turn amber if the printer is properly inserted and the battery is less than 90% charged. The printer’s charge indicators will allow you to monitor the charging process. Refer to the Controls section of this manual for more information. Figure 5: MZ Series Quad Docking Station Slide Printer into docking bay Green (Power) Indicator Amber/Green (Charge) Indicator 13 MZ Series User Guide Battery Safety Caution • Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive material will create a short circuit which could cause burns and other injuries or could start a fire. Important • Always dispose of used batteries properly. Refer to Appendix D for more battery recycling information. Important • Always observe the safety precautions in the Lithium-ion Technical Bulletin included with each Battery Pack. Caution • Use of any charger not approved specifically by Zebra for use with its batteries could cause damage to the battery pack or the printer and will void the warranty. Read carefully and always observe the safety guidelines for Li-Ion batteries provided with each battery Pack Charger Safety Do not place the Quad Charger in locations where liquids or metallic objects may be dropped into the charging bays. Use care when installing either the Charger Power supply supplied wit the printer or the power supply supplied with the MZ series Quad Charger. Do not block the ventilating slots on the top and bottom covers of either power supply. Ensure that the Charger is plugged into a power source which will not accidently be turned off if you will be charging batteries overnight. 14 MZ Series User Guide Loading the Media (All models) 1. Open the printer: Refer to Figure 6. • Press the latch release button on the top of the printer as shown at “1” below. The media cover will flip open automatically revealing the media compartment. 2. Load the media: Refer to Figure 7 • Insert the roll of media into the media compartment. Ensure that the media pulls off the core in the direction shown in Figure 6. 3. Close the Media Cover: Refer to Figure 8. • Pull a short length of media out of the printer • Close the Media Cover firmly and ensure it is securely latched on both sides.. • Turn on the printer and press the Feed button. The printer will advance media until the Feed button is released. Verify the media is feeding properly and without binding or skewing sideways Figure 6: Opening the MZ Printer (MZ 220 shown) Latch Release Button Media Compartment 15 MZ Series User Guide continued Figure 7: Installing Media Media Roll Note direction media pulls off the roll. Figure 8: Closing the Media Cover Pull a short length of media out of the Printer Media Cover Ensure both sides of the media cover are securely latched when closed. 16 MZ Series User Guide Operator Controls MZ series printer controls are detailed below and in Figure 9. The printer has two control buttons and four multipurpose indicators. The Power Button turns the printer on and off. The Feed Button advances a length of media until it is released. The Green/Amber indicator to the left of the Power Button indicates the status of the printer’s built-in charger: • The indicator is off indicates the battery is not being charged. • If the indicator is amber the battery is being charged. • If the indicator is green, the battery is fully charged. The Green Indicator between the Power and Feed buttons has two states: • A rapidly blinking light indicates a low battery condition. • A steadily lit indicator means that power is on and the battery charge level is sufficient for use The Amber Indicator to the right of the Feed button is an error indicator. • An un-lit indicator means there is no error condition and the printer can be used. • A blinking indicator could mean one of two conditions exist, which will inhibit printer operation: 1. There is no media loaded. 2. The media cover is open. 3. If both the above conditions are met and the error light is still flashing, there could be no application loaded in the printer, or the application could have become corrupted. The Blue Indicator just above the product I.D. label is a communications indicator. Its functions vary depending on the wireless communications option installed in the printer. • If the printer uses only standard IrDA® wireless communication: A blinking light indicates data is being received from a linked IrDA device. • If the printer has a Bluetooth™ radio option: 1. A steady light indicates the printer has paired with an17 MZ Series User Guide other Bluetooth device. 2. A blinking light indicates that the printer is receiving data via Bluetooth communications. • If the printer has an 802.11b/g radio installed: 1. A steady light indicates the printer has associated with a wireless Local Area Network (WLAN). 2. A blinking light indicates that the printer is attempting to associate with a WLAN. Figure 9: Printer Controls Power Light (Green) Power Button Indicates power status and battery condition. A steadily lit indicator means the battery has more than a 30% charge remaining. A blinking indicator means the battery has less than a 30% charge remaining. Feed Button Press and hold to turn unit on. Press again to turn unit off Press to advance the media. Release to stop. Charge Light (Green/ Amber) Media Status Light (Amber) Green indicates the battery fully charged. Amber indicates the battery is less than 90% charged. When off Indicates normal operation, blinking indicates either no media or that the media compartment is open IrDA Window Communication Light (Blue) When lit steadily indicates a wireless This area must be within the line of communications link is established, when sight of any other IrDA enabled device blinking indicates data transmission. for IR communications to occur. Figure 9: Standard Control panel 18 MZ Series User Guide Verify the Printer Is Working Before you connect the printer to your computer, portable data terminal ore wireless LAN, make sure that the printer is in proper working order. You can do this by printing a configuration label using the “two key reset” method. If you can’t get this label to print, refer to “Troubleshooting”. Printing a Configuration Label 1. Turn the printer off. Load the media compartment with journal media (media with no black bars printed on the back) 2. Press and hold the Feed Button. 3. Press and release the Power button and keep the Feed button pressed. When printing starts, release the Feed button. The unit will print a line of interlocking “x” characters to ensure all elements of the print head are working, print out the version of software loaded in the printer and then print two reports. The first report indicates model, ROM version, serial number, baud rate, etc. The second report prints out more detailed information on the printer’s configuration and parameter settings. If no second report appears, there is no application loaded. (See the Troubleshooting Section for sample printouts and a further discussion on how to use the configuration label as a diagnostic tool.) Connecting the Printer The printer must establish communications with a host terminal which sends the data to be printed. Communications occur in four basic ways: • Via a cable using the USB 2.0 protocol. USB drivers are included in the Zebra Universal Driver which can be downloaded from www.zebra.com. • Via the industry standard IrDA protocol. IR capability is standard with MZ series printers. • By means of an optional Bluetooth short range radio link. • By means of a wireless LAN (Local Area Network) using an optional radio per 802.11b/g specifications. 19 MZ Series User Guide Cable Communication Caution • The printer should be turned off before connecting or disconnecting the communications cable. The small connector on the USB cable plugs into the printer. The connectors are keyed to assure correct alignment; do not try to force the cable if it does not plug in. The other end of the cable must be plugged into the host terminal as shown in Figure 10, or the USB port on a computer (Figure 11.) The MZ series is configured with the USB Open HCI interface driver allowing it to communicate with Windows® based devices. USB drivers are included in the Zebra Universal Driver which can be downloaded from the Zebra Web site. Other terminals or communications devices may require the installation of special drivers to use the USB connection. Consult the factory for further details. Figure 10: Cable Communications USB Communications Cable to Terminal Refer to Appendix A for details. Communications Port Figure 11: Communications with a P.C. USB Communications Cable to Computer Refer to Appendix A details. Communications Port 20 MZ Series User Guide IR Communications Ensure that there is a direct line of sight between the printer and the terminal that will be sending data. The IR window on the front of the printer must face the corresponding window on the terminal to properly send and receive signals. The maximum distance IrDA signals can be transmitted reliably is 1M (39”). IrDA compliant terminals will automatically initiate communications to the printer. An IrDA terminal will seek out any linkable devices and establish communications between them, even turning the printer on if necessary. Figure Figure12: 14:IRIRCommunication Communications 1M (39”) 21 MZ Series User Guide Wireless Communications with Bluetooth™ Bluetooth is a worldwide standard for the exchange of data between two devices via radio frequencies. Bluetooth radios are relatively low powered to help prevent interference with other devices running at similar radio frequencies. This limits the range of a Bluetooth device to about 10 meters (32 feet). Both the printer and the device it communicates with must follow the Bluetooth standard. Other than conditions specified elsewhere in this manual, only one of the radio options can be installed in the printer at one time and the antenna used for these transmitters must not be co-located or must not operate in conjunction with any other antenna. Bluetooth Networking Overview Each Bluetooth enabled MZ series printer is identified by a unique Bluetooth Device Address (BDA) loaded into the printer when manufactured. In order to exchange data, two Bluetooth enabled devices must establish a connection. Bluetooth software is always running in the background, ready to respond to connection requests. One device (known as the master or the client) must request a connection with another. The second device (the slave or the server) then accepts or rejects the connection. A Bluetooth enabled MZ series printer will normally act as a slave creating a miniature network with the terminal sometimes referred to as a “piconet.”. For the most part, communications using the Bluetooth protocol are initiated and processed without any operator intervention. 22 MZ Series User Guide WLAN Overview All MZ series printers can be equipped with radios using the industry standard 802.11b/g protocol. MZ series printers will have the FCC I.D. number of the radio on the serial number label on the back of the unit. MZ series printers with the Zebra 802.11b/g WLAN radio option can be identified by the FCC ID: I28MD-ZLAN11G on the serial number label on the back of the printer. Methods of establishing communications to MZ series printers will vary with each LAN application. General information on establishing WLAN communications can be found in either the ”CPCL Programmers Manual” or the “Zebra Mobile Printer Wireless Configuration Guide” both available on-line at www.zebra.com. More information and LAN configuration utilities are included in Zebra’s Label Vista™ program (version 2.8 and later). Label Vista may be downloaded from the Zebra Web site. Setting Up the Software MZ series printers use Zebra’s CPCL Programming language which was designed for mobile printing applications. CPCL is fully described in the ”CPCL Programmers Manual”, available on-line from the Zebra Web site. You can also use Label Vista™, Zebra’s Windows® based label creation program which uses a graphical interface to create and edit labels in the CPCL language. Refer to Appendix F for tips on downloading the Label Vista application from Zebra’s Web site. 23 MZ Series User Guide Radio Regulatory Information Zebra Bluetooth Radios MZ-ZBR3 Caution • Exposure to Radio Frequency Radiation. The radiated output power of this internal Bluetooth radio is far below the FCC radio frequency exposure limits. The internal Bluetooth radio operates within guidelines found in radio frequency safety standards and recommendations. Do not use the printer in an unauthorized manner. Note • The following section only applies when the MZ-ZBR3 (FCC ID: I28MD-BTC2TY6) Bluetooth Radio is installed in a MZ series printer. The antenna used for this transmitter must not be co-located or must not operate in conjunction with any other antenna. European Regulatory Information for this Radio This device is intended for use in all EU and EFTA member states. Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of compliance with the R&TTE Directive 1999/5/EC: • EN55022:1998 European Immunity Standard • EN 60950: 2000 Safety of Information Technology Equipment • EN 300 328-2 V1.4.1 (2003-04) Technical requirements for spread-spectrum radio equipment • EN 301 489-1/-17 V1.5.1/1.2.1 (2003-12) -17 v1.2.1 (2002-08) EMC requirements for spread-spectrum radio equipment. This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states. Important Notice : This device is a portable RF printer intended for commercial and industrial use in all EU and EFTA member states. 24 MZ Series User Guide WLAN Module Using 802.11b/g Radio The following section only applies when the 802.11b/g WLAN module (With FCC ID: I28MD-ZLAN11G) is installed in a MZ series printer. Only one of the radio options can be installed in the printer at one time and the antenna used for these transmitters must not be co-located or must not operate in conjunction with any other antenna. MZ series printers have the FCC ID number on a label on the back of the unit. Caution • Use of a MZ series printer with the radio module marked with FCC ID: I28MD-ZLAN11G meets the FCC requirements for radio frequency (RF) radiation exposure in the standard body worn configuration with no minimum separation. In this configuration, which applies whether the belt clip or shoulder strap is used, the face of the printer from which paper is transported is facing away from the user’s body. The standard configuration must always be used when the printer is body worn. The MZ 220 and MZ 320 printers with this radio option have been SAR tested. The maximum SAR value measured for each model is listed below: Model SAR value W/Kg 1g average) ) MZ220 .049 MZ 320 .038 European Regulatory Information for this Radio AT BE CY CZ DK EE FI FR DE GR HU IE IT LV LT LU MT NL PL PT SK SI ES SE GB Note: -Member states in the EU with restrictive use for this device are crossed out! This device is also authorized for use in all EFTA member states (CH, IS, LI, NO) Important Notice: This device is a portable RF printer intended for commercial and industrial use in all EU and EFTA member states except in France where restrictive use applies. 25 MZ Series User Guide continued Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of compliance with the R&TTE Directive 1999/5/EC: • EN55022:1998 European Immunity Standard • EN 60950: 2000 Safety of Information Technology Equipment • EN 300 328-2 V1.2.1 (2001-12) Technical requirements for spread-spectrum radio equipment • EN 301 489-17 V1.2.1 (2002-08) EMC requirements for spread-spectrum radio equipment. This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France where restrictive use applies. The use of this frequency band in France is subject to restrictions. You may only use channels 10 and 11 (2457 and 2462 MHz) on French territory, except in those French departments as listed in the table below where channels 1-13 (2412-2472 MHz) may be used. For more information see http://www.anfr.fr/ and/or http:// www.art-telecom.fr 01 Ain 36 Indre 69 Rhone 02 Aisne 37 Indre et Loire 70 Haute Saone 03 Allier 39 Jura 71 Saone et Loire Sarthe 05 Hautes Alpes 41 Loir et Cher 72 08 Ardennes 42 Loire 75 Paris 09 Ariege 45 Loiret 77 Seine et Marne 10 Aube 50 Manche 78 Yvelines 11 Aude 54 Meurthe et Moselle 79 Deux Sievres 12 Aveyron 55 Meuse 82 Tarn et Garonne 16 Charente 57 Moselle 84 Vaucluse 19 Correze 58 Nievre 86 Vienne Vosges 2A Corse Sud 59 Nord 88 2B Haute Corse 60 Oise 89 Yonne 21 Cote d’Or 61 Orne 90 Territoire de Belfort 24 Dordogne 63 Puy de Dome 91 Essonne 25 Doubs 64 Pyrenees Atlantique 92 Hauts de Seine 26 Drome 65 Hautes Pyrenees 93 Seine St Denis 94 Val de Marne 27 Eure 66 Pyrenees Orientales 32 Gers 67 Bas Rhin 35 Ille et Vilaine 68 Haute Rhin 26 MZ Series User Guide Wearing the Printer Belt Clip Refer to Figure 13. All MZ series printers are have a belt clip installed as a standard feature. To use: hook the clip over your belt, and ensure that the clip is securely attached to the belt. The belt clip will pivot slightly to allow you to move freely while wearing the printer. Clip printer to belt Figure 13: Using the Belt Clip 27 MZ Series User Guide continued Adjustable Shoulder Strap Refer to Figure 14 if you have ordered the shoulder strap option for your printer. Secure each end of the shoulder strap as shown below. Use the main buckle on the shoulder strap to adjust to the desired length. Thread the free end of the shoulder strap through one of the slots on the belt clip Thread the free end of the shoulder strap through the buckle and pull tight to adjust. Secure the other end of the strap in the remaining slot on the belt clip. Pull Strap here to lengthen Hold Buckle Pull Strap here to shorten Once the shoulder strap is secured, slide the buckle as shown until you achieve the desired length. Figure 14: Using the Optional Shoulder Strap 28 MZ Series User Guide Preventive Maintenance Extending Battery Life • Always observe the safety precautions in the LithiumIon Battery Technical Bulletin included with each Battery Pack. • Never expose the battery to direct sunlight or temperatures over 104° F (40° C). • Do not charge the battery when the temperature exceeds 113° F (45° C). • Always use a Zebra power supply designed specifically for the MZ series printers. Use of any other kind of powerr supply may damage the battery. • Use the correct media for your printing requirements. An authorized Zebra re-seller can help you determine the optimum media for your application. • If you print the same text or graphic on every label, consider using a pre-printed label. • Choose the correct print darkness, and print speed for your media. • Use software handshaking (XON/XOFF) whenever possible. • Consider purchasing an extra battery. • Remember that any rechargeable battery will lose its ability to maintain a charge over time. It can only be recharged a finite number of times before it must be replaced. Always dispose of batteries properly. Refer to Appendix D for more information on battery disposal. • If you print while charging the battery, charge times will be prolonged. Extensive printing while charging could deplete the battery enough to cause the low battery warning indicator to turn on. You should suspend printing at that time and allow the battery to re-charge completely. 29 MZ Series User Guide continued General Cleaning Instructions Caution • To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer. Always turn the printer off before performing any cleaning procedures. Use care when working near the tear bar. The edges are very sharp. Caution • The printhead can be very hot after prolonged printing. Allow it to cool off before attempting any cleaning procedures. Only use the cleaning pen supplied with the printer or a cotton swab saturated with alcohol for cleaning the printhead. Caution • Use only cleaning agents specified in the following tables. Zebra Technologies Corporation will not be responsible for damage caused by any other cleaning materials used on this printer. MZ Series Cleaning Instructions Area Method Printhead Use a Zebra cleaning pen or a 70% isopropyl alcohol solution on a cotton swab to clean the print elements from end to end (the print elements are located in the thin gray line on the printhead). Platen Rotate the platen roller and clean it thoroughly with a Zebra cleaning pen or a 70% isopropyl alcohol solution and a cotton swab. Tear bar Clean thoroughly with a Zebra cleaning pen or a 70% isopropyl alcohol solution and a cotton swab. Exterior Water dampened cloth As needed Brush/air blow. After every five rolls of media (or more often, if needed) Media Compartment Interior Interval After every five rolls of media (or more often, if needed) continued 30 MZ Series User Guide Tear Bar Printhead Elements Media Compartment Platen Surface Figure 15: MZ Series Cleaning Note • Twelve packs of approved cleaning pens are available from Zebra as p/n AN11209-1. Caution • To avoid possible personal injury or damage to the Printer, never insert any pointed or sharp objects into the Printer. 31 MZ Series User Guide continued Troubleshooting Interpreting Indicators The printer’s indicators display various printer functions and their status. Check the indicator status, then refer to the Troubleshooting topic referenced in the chart. Function Indicator Color Indicator Status: Steady Indicator Status: Blinking Troubleshooting Topic Power Green Indicates printer is on and battery condition is OK to use. Blinking signifies Low Battery Charger Amber/ Green Off indicates battery is not charging. Amber indicates battery is charging. Green indicates bat tery is charged. N/A 1,6,10 Error Amber Off indicates no error condition No media or media door is open. Application may be missing or corrupted 2,4,7,9 Cable/IrDA:N/A Data is being received 5,8 Bluetooth: Printer has paired with another Bluetooth device. Data is being received 5,8 802.11b/g: Radio is associated with a WLAN Radio is trying to associate with a WLAN. 5,8 Communications Blue Troubleshooting Topics 1. No power: • Ensure you press and hold the Power switch until the Power light comes on. • Check that battery is installed properly. • Recharge or replace battery as necessary. 2. Media does not feed: • Be sure Media Cover is closed and latched. • Check media compartment. Ensure media is not binding on the sides of the compartment. 3. Poor or faded print • Clean printhead. • Check battery for possible damage. Recharge or replace as necessary. • Check quality of media. 4. Partial or missing print: • Check media alignment. 32 MZ Series User Guide • Clean printhead. • Ensure Media Cover is properly closed and latched. 5. No print: • Replace battery. • Check cable to terminal. • (Wireless units only) Restore wireless connection. 6. Reduced battery life: • Check battery date code — if battery is one to two years old, short life may be due to normal aging. • Recharge or replace battery. 7. Flashing Amber indicator: • Check that media is loaded and that printhead is closed and securely latched. • If media is present and latch is closed, indicates that no application is present or application is corrupted. Program must be re-loaded. 8. Communication Error: • (Wireless units only) Check that media is loaded, head is closed and blue communication link light is on. • Replace cable to terminal. 9. Label Jam: • Open media cover. • Generously apply alcohol to Printer in area of jammed label. 10. Battery Pack Is Hard to Install • Do not force the battery into place. Verify you have not pinched any wires between the battery and the printer. • Verify you are plugging the battery connector into the printer correctly. Resetting an MZ Series Printer If the printer has locked up and is not responding to any operator inputs or external commands, either from a connected terminal or from a linked LAN, you can perform a forced reset as follows: 1. Open the media compartment and remove any media. 2.Press the Feed button and hold it approximately ten seconds until the Power, Communications and Error indicators turn off and stay off. 3. After the three indicators turn off wait ten more seconds and press the Power button. The Printer will restart and normal operation can resume. 33 MZ Series User Guide Troubleshooting Tests Printing a Configuration Label To print out a listing of the printer’s current configuration follow these steps: 1. Turn the printer off. Load the media compartment with journal media (media with no black bars printed on the back) 2. Press and hold the Feed Button. 3. Press and release the Power button and keep the Feed button pressed. When printing starts, release the Feed button. Refer to Figures 16 and 16a for a sample configuration printout. Communications Diagnostics If there is a problem transferring data between the computer and the printer, try putting the printer in the Communications Diagnostics Mode (also referred to as the “DUMP” mode). The printer will print the ASCII characters and their text representation (or the period ‘.’, if not a printable character) for any data received from the host computer To enter Communications Diagnostics Mode: 1. Print a configuration label as described above. 2. At the end of 2nd diagnostics report, the printer will print: “Press FEED key to enter DUMP mode”. 3. Press the FEED key. The printer will print: “Entering DUMP mode”. Note • If the FEED key is not pressed within 3 seconds, the printer will print “DUMP mode not entered” and will resume normal operation. 4. At this point, the printer is in DUMP mode and will print the ASCII hex codes of any data sent to it, and their text representation (or “.” if not a printable character). Additionally, a file with a “.dmp” extension containing the ASCII information will be created and stored in the printer’s memory. It can be viewed, “cloned” or deleted using the Label Vista application. (Refer the Label Vista documentation for more information.) 34 MZ Series User Guide To terminate the Communications Diagnostics Mode and return the printer to normal operations: 1. Turn the printer OFF. 2. Wait 5 seconds. 3. Turn the printer ON. Calling Technical Support If the printer fails to print the configuration label, or you encounter problems not covered in the Troubleshooting Guide, contact Zebra Technical Support. Technical Support addresses and phone numbers for your area can be found in Appendix D of this manual. You will need to supply the following information: • Model number and type (e.g. MZ 220) • Unit serial number (Found on the large label on the back of the printer, also found in the configuration label printout. Refer to Figures 23 and 24) • Product Configuration Code (PCC) (15 digit number found on the label on the back of the unit) 35 MZ Series User Guide Print Head Test End of First Report Unit Serial Number Application Number Report appears only on units with wireless options installed. Units with no wireless options will print an empty line and resume This example has a Bluetooth™ radio installed. Figure 16: Configuration Label Example (MZ 220 illustrated) continued 36 MZ Series User Guide Bluetooth radio parameters Flash Memory Size Maximum Label Size Figure16a: Configuration Label Example (continued) 37 MZ Series User Guide Resident Fonts Amount of Memory Available CCL (CPCL) programming language is supported Figure 16c: Configuration Label Example (continued) 38 MZ Series User Guide Specifications Note.- Printer specifications are subject to change without notice. Printing Specifications Print Width MZ 220 MZ 320 Up to 1.89 in. (48,0 mm) Up to 2.9 in. (71,2 mm) Print Speed 2” per second (76,2 mm/second) Print Head Life, calculated 1,964,160 in. (50 Km) nominal Print Density 203 dots/inch (8 dots/mm) Printhead Burn Line to Tear Edge 0.2 in. (5,08 mm) Memory and Communications Specifications, MZ series Flash Memory 4 MB SRAM 8 MB Standard Communications USB 2.0 Full Speed Interface (12 Mbps) & Infrared wireless link (meets IrDA 1.1 communications specifications ) Optional Bluetooth compatible module Optional 802.11b/g SRRF module Optional Wireless Communications Only one wireless option may be installed in a printer. Media Specifications MZ 220 Width Max. Printable Area MZ 320 2.0 ± .03 in. (50,8 ±0.8 mm) 3.0 ± .03 in. (76,2 mm±0.8 mm ) 1.9” (48,3 mm) x 32” (812,8 mm) 2.9” (73,7 mm) x 21” (53,3mm) Label Thickness .002 in to .004 in (0,050 mm to 0,102 mm) Max. Media Roll dia. 1.88 in. (47,8 mm) O.D. Label Inner Core Diameter 0.40 to 0.75 in.. (10,2 to 19 mm) Use Zebra brand direct thermal or UV resistant coated media that is outside wound. 39 MZ Series User Guide Font and Bar Code Specifications for MZ Series Codabar (NW-7) UCC/EAN 128 Code 39 Code 93 EAN 8/JAN 8, 2 and 5 digit extensions EAN 13/JAN 13, 2 and 5 digit extensions Linear & 2-D Bar Bar Codes Available EAN 14/JAN 14, 2 and 5 digit extensions lnterleaved 2 of 5 MSI/Plessey FIM/POSTNET UPC-A, 2 and 5 digit extensions UPC-E, 2 and 5 digit extensions QR Code MaxiCode PDF 417 RSS (Reduced Space Symbology®) Composite Symbology® Rotation Angles 0°, 90°, 180°, and 270° Standard Fonts: 25 bit-mapped fonts; 1 scalable (CG Trimvirate Bold Condensed*) Downloadable optional bit-mapped & scalable fonts via Label Vista software Fonts Available International character sets: Chinese 16 x 16 (trad), 16 x 16 (simplified), 24 x 24 (simplified); Japanese 16 x 16, 24 x 24 Korean Myang 16 x 16 Greek Hebrew/Arabic *contains UFST from Agfa Monotype Corporation 40 MZ Series User Guide USB Communications Port Pin# Signal Name Type Description VBUS USB Bus Power USB - bi-directional I/O signals USB + bi-directional I/O signals USB_ID Identifies A/B connector Return Ground Figure 17: USB Communications Port Physical, Environmental and Electrical Specifications Weight w/ battery, excluding media MZ 220 MZ 320 .70 lbs. (317,5 g. ) .75 lbs. (340,2 kg.) Operating : 14° to 122° F (-10° to 50° C) Charging: 32° to 104° F (-0° to 40° C) Temperature Storage w/o battery: -4° to 140° F (-25° to 60° C) Storage w/ battery: -4° to 113° F (-25° to 45°C) Relative Humidity Battery Operating: 10% to 90% (noncondensing) Storage: 10% to 90% (noncondensing) Lithium-Ion, 7.4 VDC (nominal); 1500 AHr. Intrusion Protection (IP) Rating 42 continued 41 MZ Series User Guide 2.47” (62,7 mm) 5.34” (135,6 mm) 2.26” (57,4 mm) 3.18” (80,7 mm) Figure 18: MZ 220 Overall Dimensions 2.47” (62,7 mm) 5.34” (135.6 mm) 2.26” (57,4 mm) 4.11” (104,4 mm) Figure 19: MZ 320 Overall Dimensions 42 MZ Series User Guide MZ Series Accessories Description MZ 220/ MZ 320/ • • • • • • • • • • Adjustable shoulder strap Protective soft case Vehicle Adapter Cable Extra battery packs MZ Series Quad Docking Station 100-240 VAC Refer to Appendix A for information on Data I/O Cables For more details on available accessories, contact your authorized Zebra reseller. 43 MZ Series User Guide Appendix A Interface Cables USB Cable Part Number AT17010-1; USB A to USB Mini B Cable MORE INTERFACE CABLES Contact the Factory or your Zebra Sales Representative for more information on interface cables to most major manufactur’s data terminals. You may also vist the Zebra Web site at http://www.zebra.com for a listing of interface cables for all series of Zebra mobile printers 44 MZ Series User Guide Appendices Appendix B Media Supplies To insure maximum printer life and consistent print quality and performance for your individual application, it is recommended that only media produced by Zebra be used. Advantages include: • Consistent quality and reliability of media products. • Large range of stocked and standard formats. • In-house custom format design service. • Large production capacity which services the needs of many large and small media consumers including major retail chains world wide. • Media products that meet or exceed industry standards. For more information call Zebra Technologies Corporation at +1.866.230.9495 (U.S., Canada and Mexico) and ask to speak to a Media Sales Representative. Appendix C Maintenance Supplies In addition to using quality media provided by Zebra, it is recommended that the printer be cleaned as prescribed in the maintenance section. The following items are available for this purpose: • Cleaning Pen (10 pack), Reorder No. AN11209-1 • Cleaning Kit with Cleaning Pen, and Cotton Swabs, Reorder No. AT702-1 45 MZ Series User Guide Appendices Appendix D Battery Disposal The EPA certified RBRC® Battery Recycling Seal on the Lithium-Ion (Li-ion) battery supplied with your printer indicates Zebra Technologies Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Li-ion batteries into the trash or the municipal waste stream, which may be illegal in your area. Important • When the battery is worn out, insulate the terminals with tape before disposal Please call 1-800-8-BATTERY for information on Li-ion battery recycling and disposal bans/restrictions in your area. Zebra Technologies Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources. Outside North America, please follow local battery recycling guidelines. Product Disposal Do not dispose of this product in unsorted municipal waste. This product is recyclable. Please recycle according to your local standards. For more information, please see our web site at: http://www.zebra.com/recycle. 46 MZ Series User Guide Appendices Appendix F Product Support When calling with a specific problem regarding your printer, please have the following information on hand: • Model number/type (e.g. MZ 220) • Unit serial number • Product Configuration Code (PCC) For Product Support Contacts, see the table at right or contact your local reseller. Serial Number Bar Code PCC Bar Code MZ Series Serial Number Label MZ 220 illustrated 47 MZ Series User Guide Appendices Product Support Contacts In the Americas contact Regional Headquarters Technical Support Customer Service Dept. Zebra Technologies International,LLC 333 Corporate Woods Parkway Vernon Hills, Illinois 60061.3109 U.S.A T: +1 847 793 2600 Toll-free +1 800 423 0422 T: +1 847 913 2259 F: +1 847 913 2578 Hardware: hwtsamerica@zebra.com Software: swtsamerica@zebra.com For printers, parts, media, and ribbon, please call your distributor, or contact us. T: +1 866 230 9494 F: +1 847 913 8766 E: VHCustServ@zebra.com In Europe, Africa, the Middle East, and India contact Regional Headquarters Technical Support Internal Sales Dept. Zebra Technologies Europe Limited Zebra House The Valley Centre, Gordon Road High Wycombe Buckinghamshire HP13 6EQ, UK T: +44 (0)1494 472872 F: +44 (0) 1494 450103 T: +44 (0) 1494 768298 F: +44 (0) 1494 768210 Germany: Tsgermany@zebra.com F: +44 (0) 1494 768244 E: mseurope@zebra.com France:: Tsfrance@zebra.com Spain/Portugal: Tsspain@zebra.com All other areas: Tseurope@zebra.com For printers, parts, media, and ribbon, please call your distributor, or contact us. T: +44 (0) 1494 768316 F: +44 (0) 1494 768244 E: mseurope@zebra.com In the Asia Pacific region contact Regional Headquarters Technical Support Customer Service Zebra Technologies Asia Pacific, LLC 16 New Industrial Road #05-03 Hudson TechnoCentre Singapore 536204 T: +65 6858 0722 F: +65 6885 0838 T: +65 6858 0722 F: +65 6885 0838 E: tsasiapacific@zebra.com For printers, parts, media, and ribbon, please call your distributor, or contact us. T: +65 6858 0722 F: +65 6885 0837 48 MZ Series User Guide Appendices Appendix E Using zebra.com The following details using the search functions on Zebra’s Web site www.zebra.com for finding specific documents . Finding Manuals: http://www.zebra.com/id/zebra/na/en/index/resource_ library/manuals.html Select printer model (e.g. MZ 220) Select language Select manual type Click on“SUBMIT” Example: FInd the Mobile Printer WIreless Configuation Guide. Perform the above step and select as a manual type “Networking Manual” Finding the Label Vista Download page: http://www.zebra.com/id/zebra/na/en/index/drivers_downloads.html Sort by “Manual Type” (optional step) Select the Wireless Configuration Guide Click on “Download” to save a .pdf file to your local drive continued 49 MZ Series User Guide Appendices At the resulting window select your printer model from the pull-down menu in the “Utilities” section. MZ 220 Enter your printer model number and click on “SUBMIT” Click on “Download” to save a demo application to your local drive 50 MZ Series User Guide Appendices Index Accessories Specifications Battery, charging 11 Technical Support, contacting 35 Troubleshooting Font/bar Code 40 Memory/communications 39 Physical 41 printing 39 Belt clip 27 list of 43 Shoulder Strap 28 MZ Series Charger Power Supply 12 using Quad Docking Station 13 Communications Diagnostics Mode 34 control panel indicators 32 Standard control panel indicators Battery, installing 10 Battery life, tips for extending 29 Bluetooth™ Networking Overview 22 Bluetooth Device Address (BDA) 22 Cleaning Troubleshooting tests 34 printing a configuration label 19,34 QL configuration label example 36 Troubleshooting Topics ,32 Wireless communications general instructions 30 Communications Bluetooth™ radio 22 Infrared (IrDA) 21 Local Area Network Zebra 802.11b/g WLAN Radio 25 WLAN Overview 23 infrared (IR) 21 RS232 Connector signals 41 with a cable 20 Communications diagnostics 34 Configuration label, printing 34 Damage, shipping 8 Declaration of Conformity EU countries Bluetooth radio 24 Zebra 802.11g WLAN 25 Label Vista 23 use in troubleshooting 34 Manual CPCL Programming 8,23 Media, loading 15 Operator Controls 17 Programming language CPCL 8 Radio options.See Wireless communications Regulatory Information Bluetooth radio ( MZ-ZBR3) 24 Zebra 802.11b/g Radio 25 Safety Precautions placement of charger 14 while charging batterys 14 Software 23 52 MZ Series User Guide Patent Numbers This product and/or its use may be covered by one or more of the following US patents and corresponding international patents worldwide D275,286 D347,021 D389,178 D430,199 D433,702 3,964,673 4,019,676 4,044,946 4,360,798 4,369,361 4,387,297 4,460,120 4,496,831 4,593,186 4,607,156 4,673,805 5,047,617 5,103,461 5,113,445 5,140,144 5,132,709 5,372,439 5,373,148 5,378,882 5,396,053 5,396,055 5,570,123 5,578,810 5,589,680 5,612,531 5,642,666 6,068,415 6,095,704 6,109,801 6,123,471 6,147,767 5,142,550 5,149,950 5,157,687 5,168,148 5,168,149 5,180,904 5,399,846 5,408,081 5,410,139 5,410,140 5,412,198 5,415,482 5,657,066 5,768,991 5,790,162 5,791,796 5,806,993 5,813,343 6,151,037 6,201,255 B1 6,231,253 B1 6,261,009 6,261,013 6,267,521 5,229,591 5,418,812 5,816,718 6,270,072 B1 5,230,088 5,235,167 5,243,655 5,420,411 5,436,440 5,444,231 5,820,279 5,848,848 5,860,753 6,285,845 B1 6,292,595 6,296,032 5,247,162 5,449,891 5,872,585 6,364,550 4,736,095 4,758,717 4,816,660 4,845,350 5,250,791 5,250,792 5,262,627 5,449,893 5,468,949 5,479,000 5,874,980 5,909,233 5,976,720 6,379,058 B1 6,409,401 B1 6,411,397 B1 5,267,800 5,479,002 5,978,004 6,428,227 B2 4,896,026 4,897,532 4,923,281 4,933,538 5,280,163 5,280,164 5,280,498 5,304,786 5,304,788 5,321,246 5,335,170 5,364,133 5,367,151 5,479,441 5,486,057 5,503,483 5,504,322 5,528,621 5,532,469 5,543,610 5,545,889 5,552,592 5,995,128 5,997,193 6,004,053 6,010,257 6,020,906 6,034,708 6,036,383 6,057,870 6,068,415 6,530,705 6,540,122 6,607,316 6,609,844 6,874,958 6,899,477Ł 4,992,717 5,015,833 5,017,765 5,021,641 5,029,183 53 MZ Series User Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 54 Page Layout : TwoPageRight Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:a039020e-4c8e-11db-93f4-000393867534 Create Date : 2005:05:23 14:08:24Z Metadata Date : 2006:09:25 08:08:59-04:00 Modify Date : 2006:09:25 08:08:59-04:00 Creator Tool : Adobe InDesign CS (3.0.1) Rendition Class : proof:pdf Document ID : adobe:docid:indd:4df339a2-cd13-11d9-b89f-97ae2930a2b9 Derived From Instance ID : a98a9180-ca19-11d9-9c54-c2bf14f11c27 Derived From Document ID : adobe:docid:indd:1198ea39-c205-11d9-8f12-957359562bab Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:c9bfd4b6-f0c5-11da-8f16-000393867534, uuid:a43fb0c4-4a2a-11db-ac9e-b1d8e00f7c33, uuid:a43fb0c4-4a2a-11db-ac9e-b1d8e00f7c33, uuid:a43fb0c4-4a2a-11db-ac9e-b1d8e00f7c33, uuid:a43fb0c4-4a2a-11db-ac9e-b1d8e00f7c33, uuid:df9caed2-7c7f-11da-9751-000393867534, uuid:d73f3e79-7c7f-11da-9751-000393867534, uuid:675f4059-7c82-11da-9751-000393867534, uuid:21cf3509-7c83-11da-9751-000393867534 Manifest Reference Document ID : uuid:c9bfbe3c-f0c5-11da-8f16-000393867534, adobe:docid:photoshop:a43fb0be-4a2a-11db-ac9e-b1d8e00f7c33, adobe:docid:photoshop:a43fb0be-4a2a-11db-ac9e-b1d8e00f7c33, adobe:docid:photoshop:a43fb0be-4a2a-11db-ac9e-b1d8e00f7c33, adobe:docid:photoshop:a43fb0be-4a2a-11db-ac9e-b1d8e00f7c33, uuid:df9c8274-7c7f-11da-9751-000393867534, uuid:d73f29b6-7c7f-11da-9751-000393867534, uuid:675f226a-7c82-11da-9751-000393867534, uuid:21cf182e-7c83-11da-9751-000393867534 Format : application/pdf Title : UMAN_MZS_2 Description : MZ series User Guide, UMAN-MZS-001 rev. A (preliminary) Creator : Zebra Technologies International, LLC Tagged PDF : Yes Trapped : False Author : Zebra Technologies International, LLC Subject : MZ series User Guide, UMAN-MZS-001 rev. A (preliminary) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools