Zebra Technologies MD-ZBR5MZ Zebra BT radio User Manual Instllation Manual

Zebra Technologies Corporation Zebra BT radio Instllation Manual

Instllation Manual

Download: Zebra Technologies MD-ZBR5MZ Zebra BT radio User Manual Instllation Manual
Mirror Download [FCC.gov]Zebra Technologies MD-ZBR5MZ Zebra BT radio User Manual Instllation Manual
Document ID1543231
Application IDn2Wl6bnf5MnNznKQP0MH9g==
Document DescriptionInstllation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.39kB (217381 bits)
Date Submitted2011-09-16 00:00:00
Date Available2011-09-16 00:00:00
Creation Date2011-09-16 08:12:02
Producing SoftwareAcrobat Distiller 8.3.1 (Windows)
Document Lastmod2011-09-16 08:12:12
Document TitleInstllation Manual
Document CreatorAcrobat PDFMaker 8.1 for Word
Document Author: Vikas Dhiman

1. Install the MLB in printer housing. Tighten the screw highlighted in red (see figure 1).
Figure 1
2. On the print head/radio module chassis, install coaxial cable as shown in figure 2 and move it away from the
motor as shown in figure 3.
Figure 2
Figure 3
3. Pull the coaxial cable from the bottom of chassis so that the open end of the cable comes out from bottom side
of radio module. See figures 4 and 5 for details.
Figure 4
Figure 5
4. Install the print head flex cable into the connector as shown in figure 6. Note that the flex cable has to be
pushed into the chassis.
Figure 6
5. Install the motor cable and sensor cable as shown in figures 7 and 8 respectively.
Figure 7
Figure 8
6. Install the antenna PCBA on the top cover through plastic guides highlighted in figure 9.
The antenna(s) used for this transmitter must be installed must not be co‐located or operating in conjunction
with any other antenna or transmitter
Figure 9
Figure 10
7. Connect the open end of coaxial cable to the antenna PCBA as shown in figure 11.
Figure 11
8. Apply Kapton tape on coaxial cable to ensure that the cable is oriented perpendicular w.r.t. antenna PCBA.
Figure 12
9. Install the button and close the top cover as shown in figure 13.
Figure 13
10. Install screws at locations highlighted in figures 14, 15 and 16. Install battery and tighten the lock.
Figure 14
Figure 15
Figure 16

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Company                         : Zebra Technologies
Source Modified                 : D:20110916121148
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Modify Date                     : 2011:09:16 08:12:12-04:00
Create Date                     : 2011:09:16 08:12:02-04:00
Metadata Date                   : 2011:09:16 08:12:12-04:00
Document ID                     : uuid:dd8e6d78-c5d9-44d1-abe4-3dfe57cdfed6
Instance ID                     : uuid:963cf2b6-d9b2-4e4b-9a39-2d019f7b77a8
Subject                         : 5
Format                          : application/pdf
Creator                         : Vikas Dhiman
Title                           : 
Page Count                      : 5
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : Vikas Dhiman
EXIF Metadata provided by EXIF.tools
FCC ID Filing: I28MD-ZBR5MZ

Navigation menu