Zebra Technologies MK3190 MICRO KIOSK User Manual
Zebra Technologies Corporation MICRO KIOSK
USERS MANUAL
MK3100/3190
Quick Reference Guide
© 2012 Motorola Solutions, Inc. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability,
function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Motorola products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in
Motorola products.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are
used under license. All other trademarks are the property of their respective owners.
Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
http://www.motorolasolutions.com
Motorola Solutions, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo
are trademarks or registered trademarks of Motorola Trademark Holdings,
LLC and are used under license. All other trademarks are the property of
their respective owners.
© 2012 Motorola Solutions, Inc. All rights reserved.
72-167095-01 Revision .4 — October 2012
Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure
that you are adhering to your company's safety programs to prevent employee injury.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
Regulatory Information
This device is approved under Motorola Solutions, Inc.
This guide applies to the following Model Numbers: MK3100, MK3190
All wireless information only applies to MK3190.
All Motorola devices are designed to be compliant with rules and regulations in locations
they are sold and will be labeled as required.
Local language translations are available at the following website:
http://www.motorolasolutions.com/support
Any changes or modifications to Motorola equipment, not expressly approved by
Motorola, could void the user's authority to operate the equipment.
Only use Motorola approved and UL Listed accessories.
Declared maximum operating temperature: 40°C.
Radio Modules
The device contains an approved radio module. The module is identified below.
Motorola 21-148603-0B RLAN & BT.
Wireless Device Country Approvals
Operation of the device without regulatory approval is illegal.
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) is/are approved for use in the following countries: United States, Canada,
Japan, China, S. Korea, Australia, and Europe1.
Please refer to the Declaration of Conformity (DoC) for details of other country
markings. This is available at http://www.motorola.com/doc
Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria,
Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will
ensure the product operates on the correct channels for the particular country of use.
Ad-Hoc Operation (5 GHz band)
Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is
restricted to Indoor Use Only, any other use will make the operation of this device illegal.
Frequency of Operation - FCC and IC
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250
MHz) is restricted to Indoor Use Only; any other use will make the operation of this
device illegal.
Industry Canada Statement:
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-Channel mobile satellite systems. High power
radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz
and 5650-5850 MHz and these radars could cause interference and/or damage to LE-
LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux
(c.-à-d., qu'ils ont la priorité) pour les bands 5250-5350 MHz et 5650-5850 MHz et que
ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The
range of channels is limited by firmware.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres - Vehicles Use
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders) and any other area where you would normally
be advised to turn off your vehicle engine.
Potentially Hazardous Atmospheres - Fixed Installations
You are reminded of the need to observe restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the air contains chemicals or particles
(such as grain, dust, or metal powders).
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline
staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its
use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical
equipment.
Wireless devices should be switched off wherever you are requested to do so in
hospitals, clinics or healthcare facilities. These requests are designed to prevent
possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be
maintained between a handheld wireless device and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless Technology Research.
Persons with pacemakers:
•
Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker
when turned ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to minimise the potential for
interference.
•
If you have any reason to suspect that interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if
the operation of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human
exposure to electromagnetic fields from radio devices. For information on "International"
human exposure to electromagnetic fields refer to the Motorola Declaration of
Conformity (DoC) at http://www.motorola.com/doc.
Europe
To satisfy EU RF exposure requirements, a mobile transmitting device must operate
with a minimum separation distance of 20 cm or more from a person's body.
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other transmitter/
antenna except those already approved in this filling.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally
at remote locations or operating near users at stand-alone desktop of similar
configurations must operate with a minimum separation distance of 20 cm from all
persons.
LED Devices
Invisible and Visible LED Light, Class 1 LED Product
COMPLIES WITH IEC 60825-1:2001 (Ed.1.2) & IEC 62471:2006 (Ed.1.0);
EN 62471:2008.
LED LIGHT DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M
LED PRODUCT.
LED LICHT SEHEN SIE NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN
BETRACHTEN LED CLASSE 1M.
LUMIERE LED - NE PAS REGARDER DIRECTEMENT AVEC LES INSTRUMENTS
OPTIQUES. APPAREIL A LED DE CLASSE 1M.
Imager Labeling
Power Supply
This device must be powered from an 802.3af or 802.3at compliant power source which
has been certified by the appropriate agencies, or by a LISTED Motorola, Type no.
PWRS-14000 (12Vdc, 4.16A) direct plug-in power supply, marked Class 2 or LPS
(IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals
given to this unit and may be dangerous.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
The use of 5 GHz WLAN's, for use in the U.S., has the following restrictions:
•
Notched Band 5.60 - 5.65 GHz
/(' 䗀ሴ य 䙊䗷ݹᆖԚಘⴤ㿶ݹᶏ
0
㊫ /(' ӗ૱
CAUTION- CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO NOT STARE INTO BEAM
OR VIEW WITH OPTICAL INSTRUMENTS.
ATTENTION- LUMIÉRE LASER DE CLASSE 2 EN CAS D'OUVERTURE. NE PAS
REGARDER DANS LE FAISCEAU.
VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET. NICHT
IN DEN STRAHL BLICKEN.
⊼ᛣ˖ᠧᓔᯊ ᳝㉏▔ܝ0 ㉏/(' 䕤ᇘ ࣓Ⳉ㾚 䗮䖛ܝᄺҾ఼Ⳉ㾚 ܝᴳ
LED light is emitted from this aperture:
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
•
Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry & Science Canada. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry
Canada technical specifications were met.
CE Marking and European Economic Area (EEA)
The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:
•
Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -
2.4835 GHz
•
France, outside usage is restricted to 2.4 - 2.454 GHz.
•
Italy requires a user license for outside usage.
Statement of Compliance for MK3190
Motorola/Symbol hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of
Conformity may be obtained from http://www.motorola.com/doc
Statement of Compliance for MK3100
Motorola/Symbol hereby declares that this device is in compliance with all the
applicable Directives, 2004/108/EC and 2006/95/EC. A Declaration of Conformity may
be obtained from http://www.motorola.com/doc
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
Korea Warning Statement for Class B ITE
Other Countries
Ukraine
This equipment corresponds to requirements of the Technical Regulation No. 1057,
2008 on restrictions as to the use of some dangerous substances in electric and
electronic devices.
Australia
Use of 5GHz RLAN's in Australia is restricted in the following band 5.50 - 5.65GHz.
Brazil
Regulatory declarations for MK3190 - BRAZIL
Declarações Regulamentares para MK3190 - BRAZIL
Nota: "A marca de certificação se aplica ao Transceptor, modelo MK3190. Este
equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário."
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Chile
"Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.".
China
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
S. Korea
For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two
expressions should be displayed.
䚨Gⱨ㉔㉘⽸⏈G㟨㟝G㩅G㤸䑀䝰㐔Gᴴ⏙㉥㢨G㢼㢀
䚨Gⱨ㉔㉘⽸G⏈㤸䑀䝰G㐔Gᴴ⏙㉥㢨G㢼㡰⦐G㢬⮹㙼㤸ḰGḴ⥜═G㉐⽸㏘⏈G
䚔G㍌G㛺㏩⏼␘ 㻚
Taiwan
㠪⚓
վ࣏⦷䴫⌒䕫ሴᙗ䴫㇑⨶䗖⌅
ㅜॱҼọ
㏃රᔿ䂽䅹ਸṬѻվ࣏⦷ሴ乫䴫ˈ䶎㏃䁡ਟˈޜਨǃ
୶㲏ᡆ֯⭘㘵൷нᗇ㠚䆺ᴤ乫⦷ǃ࣐བྷ࣏⦷ᡆ䆺ᴤ䁝䀸ѻ
⢩ᙗ৺࣏㜭DŽ
ㅜॱഋọ
վ࣏⦷ሴ乫䴫ѻ֯⭘нᗇᖡ丯伋㡚ᆹޘ৺ᒢᬮਸ⌅䙊ؑ˗
㏃Ⲭ⨮ᴹᒢᬮ⨮䊑ᱲˈ៹・ণڌ⭘ˈі᭩ழ㠣❑ᒢᬮᱲᯩᗇ㒬㒼֯⭘DŽ
ࡽ丵ਸ⌅䙊ؑˈᤷ䴫ؑ㾿ᇊᾝѻ❑㐊䴫䙊ؑDŽ
վ࣏⦷ሴ乫䴫丸ᗽਇਸ⌅䙊ؑᡆᐕᾝǃ
、ᆨ৺䟛Ⱳ⭘䴫⌒䕫ሴᙗ䴫䁝ۉѻᒢᬮDŽ
൘〝䎛乫ᑦޗѻ❑㐊䋷䀺ۣ䕨䁝ۉˈ䲀ᯬᇔޗ֯⭘DŽ
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Motorola
for recycling. For information on how to return product, please go to:
http://www.motorola.com/recycling/weee.
: :
Motorola .
, : http://www.motorola.com/recycling/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af produkter på:
http://www.motorola.com/recycling/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer
zum Recycling an Motorola zurückgesandt werden. Informationen zur Rücksendung von
Produkten finden Sie unter http://www.motorola.com/recycling/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise
eesmärgil Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun
aadressi: http://www.motorola.com/recycling/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a
Motorola al final de su ciclo de vida para que sean reciclados. Si desea más información sobre
cómo devolver un producto, visite: http://www.motorola.com/recycling/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de
produits, consultez : http://www.motorola.com/recycling/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita
devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web:
http://www.motorola.com/recycling/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.motorola.com/recycling/weee weboldalra.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur
naar Motorola te worden teruggezonden voor recycling. Raadpleeg
http://www.motorola.com/recycling/weee voor meer informatie over het terugzenden van
producten.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à
Motorola para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.motorola.com/recycling/weee.
Românesc: Pentru clienii din UE: Toate produsele, la sfâritul duratei lor de funcionare,
trebuie returnate la Motorola pentru reciclare. Pentru informaii despre returnarea produsului,
accesai: http://www.motorola.com/recycling/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju
Motorola za reciklažo. Za informacije o vraèilu izdelka obišèite:
http://www.motorola.com/recycling/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on
osoitteessa http://www.motorola.com/recycling/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till
Motorola för återvinning. Information om hur du returnerar produkten finns på
http://www.motorola.com/recycling/weee.
Unpacking
Remove the MK3100/3190 from its packing and inspect it for damage. Keep the
packing, it is the approved shipping container and should be used if the device needs to
be returned for servicing.
MK3100/3190 Parts
Ferrite Core Placement
You must place a ferrite core (Motorola p/n 34.10P16.001) on the Ethernet cable as
follows:
1. Open the ferrite core and place it on the cable.
2. Route the cable outside the ferrite core once and then close the ferrite core.
Note:
•
Supports standard 10/100Mbps Ethernet network.
•
Use Motorola approved Mini-USB cable (optional).
Mounting
Use a standard VESA mount to mount the device:
1. Select a VESA mount that conforms to the 100 mm VESA specification.
2. The device’s mounting inserts are M4 x 8.1 mm. When selecting an appropriate
screw type, ensure its length does not penetrate the device’s back housing more
than 8.1 mm after going through the mounting plate.
3. Align the VESA mounting holes with the mounting holes on the back of the device.
4. Insert the screws through each of the four aligned mounting holes.
Service Information
If you have a problem using the equipment, contact your facility’s technical or systems
support. If there is a problem with the equipment, they will contact the Motorola
Solutions Global Customer Support Center at:
http://www.motorolasolutions.com/support.
For the latest version of this guide go to: http://www.motorolasolutions.com/support
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty
For Australia Only:
This warranty is given by Motorola Solutions Australia Pty Limited (ABN16 004 742 312)
of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come
with guarantees that cannot be excluded under the Australia Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. Motorola Solutions Australia’s limited warranty above is in
addition to any rights and remedies you may have under the Australian Consumer Law.
If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You
may also visit our website:
http://www.motorola.com/Business/XA-EN/Pages/Contact_Us for the most updated
warranty terms.
ȠɅɅɁɇɃɄȶaa
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Motorola'ya iade
edilmelidir. Ürünlerin nasıl lütfen şu adresi ziyaret edin:
iade edileceği hakkında bilgi için
Touch Screen / LCD
Speakers
Scanner Window
Microphone
Function Buttons
Cable Run
Power
Mini-USB Host/
Client Port
RJ45 (Ethernet)
MicroSD Card Slot
Headset Jack
Cable Run
Mounting Hole (4)
Cable Run
Mini-USB
Host Ports (2)
Reset Button
Back View