Zebra Technologies RS507 Hands-Free Imager, BT Barcode Scanner User Manual QRG 507

Zebra Technologies Corporation Hands-Free Imager, BT Barcode Scanner QRG 507

User Manual

RS507 Hands-Free ImagerQuick Reference GuideQRG_507.fm Page 1 Wednesday, January 28, 2009 8:37 PM
2 RS507 Hands-Free Imager© 2009 MOTOROLA, INC. All rights reserved.Motorola reserves the right to make changes to any product to improve reliability, function, or design.Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products.MOTOROLA and the Stylized M Logo are registered trademarks of Motorola, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.Motorola, Inc.One Motorola PlazaHoltsville, N.Y. 11742-1300www.motorola.com/enterprisemobility.WarrantyFor the complete Motorola hardware product warranty statement, go to:www.motorola.com/enterprisemobility/warranty.PatentsThis product is covered by one or more patents. For patent information go to: www.motorola.com/enterprisemobility/patents.QRG_507.fm Page 2 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 3IntroductionThe RS507 Hands-Free Imager (also referred to as Imager) is wearable barcode scan solution for both 1D and 2D barcode symbologies. The Imager is also compatible with a wide range of mobile computers communicating over Bluetooth.The Imager is designed for a wide range of applications from management of products in a warehouse, processing deliveries at a courier facility, hospitality to scanning lift tickets at a ski resort.The Imager uses camera-based scanning technology, designed to offer flexible hands-free operation with ergonomic comfort for right or left hand users.The Imager can be operated in both manual and auto-triggering modes. Auto-triggering is a patented Intelligent Sensing Technology combining motion and proximity sensing for triggering the Imager.The Imager durability is built to last and rated for indoor and outdoor daily use in intensive scan environments. Built on magnesium chassis, the Imager offers durability associated with the most rugged mobile computers.About this GuideThis guide provides basic information on the following topics:•Cordless Configuration Features on page 5•Change Trigger Position on page 7•Getting Started - Cordless Configuration on page 8•Getting Started - Corded Configuration on page 9•Establish Bluetooth Connection on page 11•Scan on page 13•Status Indications on page 11•Troubleshooting on page 16•Resetting the Imager on page 17•Field Replaceable Parts on page 18•Cleaning on page 21•Ergonomic Recommendations on page 24•Regulatory Information on page 23•Waste Electrical and Electronic Equipment (WEEE) on page 34For more information, refer to the RS507 Hands-Free Imager Product Reference Guide, p/n 72-120802-01 available at: www.motorola.com/enterprisemobility/manuals.QRG_507.fm Page 3 Wednesday, January 28, 2009 8:37 PM
4 RS507 Hands-Free ImagerUnpacking the ImagerAfter opening the shipping box, inspect the contents. You should have received the following:Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact Motorola Enterprise Mobility Support immediately. See Service Information on backcover for contact information.Model Description RS507 Standard Battery Extended Battery Corded Adapter Quick Start GuideRS507-IM200000STWRTriggered RS507 with standard batteryRS507-IM200000SNWR Triggerless RS507 with standard batteryRS507-IM200000ENWE Triggerless RS507 with extended batteryRS507-IM200000CTWRCorded and Triggered RS507 QRG_507.fm Page 4 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 5Cordless Configuration FeaturesImager WindowBattery Battery Release LatchFingers Strap Scan TriggerStrap BuckleBeeperRestore KeyLeft Scan LEDStrapRight Scan LEDComfort PadTrigger AssemblyNOTE When the imager is provided as triggerless configuration, the auto-triggering mode is enabled by default.Asset Control LabelQRG_507.fm Page 5 Wednesday, January 28, 2009 8:37 PM
6 RS507 Hands-Free ImagerCorded Configuration FeaturesRelease LatchImager WindowFingers Strap Scan TriggerComfort PadCorded AdapterStrap BuckleBeeperRestore KeyLeft Scan LED StrapRight Scan LEDTrigger AssemblyInterface Cable Connector to WT4090 Asset Control LabelQRG_507.fm Page 6 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 7Change Trigger PositionThe Trigger Assembly of the Imager rotates to provide left-hand or right-hand use.1. Remove the Fingers Strap from the Strap Buckle.2. From bottom of Imager, Hold and pull the Comfort Pad out of the Barcode Imager.3. Determine whether the Imager is used on the right or left hand and rotate the Trigger Assembly.4. Rotate the Trigger Assembly so that the Scan Trigger is positioned next to the thumb when the Imager is placed on the index and middle fingers.5. Position the Comfort Pad onto the Imager. 6. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad “locks” into place.7. Insert the Fingers Strap into the Strap BuckleCAUTION The Trigger Assembly only rotates 180° around the back of the scan assembly. Do not rotate the Trigger Assembly past the designed stopsFingers StrapStrap BuckleComfort PadTrigger AssemblyTrigger AssemblyQRG_507.fm Page 7 Wednesday, January 28, 2009 8:37 PM
8 RS507 Hands-Free ImagerGetting Started - Cordless ConfigurationBefore using the Imager, charge the battery. The 8-Bay Battery Charger supports both standard and extended capacity batteries.Charge the BatteryTo charge the Imager battery, refer to SAC5070 Quick Start Guide.Install the Battery1. Align the Battery on top of the Imager.2. Push the battery all the way into the Locking Slots of the Imager.3. Firmly press the Battery into the Imager until a “click” is heard ensuring the Battery Release Latch is fully engaged with the Imager.Remove the Battery1. Hold the Imager in one hand.2. Press the Battery Release Latch.3. Pull up the Battery to release from the Locking Slots of the Imager.Wear the Imager1. Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb.Locking SlotsBattery Battery Release LatchScan TriggerQRG_507.fm Page 8 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 92. Tighten the Fingers Strap.Getting Started - Corded ConfigurationIn order to start using the Imager you must install the Corded Adapter.Connect Corded Adapter1. Align the Corded Adapter on top of the Imager.2. Push the Corded Adapter all the way into the Locking Slots of the Imager.3. Firmly press the Corded Adapter into the Imager until a “click” is heard ensuring the Adapter Release Latch is fully engaged with the Imager.Remove the Corded Adapter1. Hold the Imager in one hand. 2. Press the Adapter Release Latch.3. Pull up the Corded Adapter to release from the Locking Slots of the Imager.Fingers Strap Locking SlotsAdapter Release Latch Corded Adapter QRG_507.fm Page 9 Wednesday, January 28, 2009 8:37 PM
10 RS507 Hands-Free ImagerConnect to a Wearable Terminal The Imager connects to the WT4090 and mounts on the fingers.1. On the WT4090, remove the connector cover.2. Connect the Imager Interface Cable Connector to the WT4090 Interface Connector.Wear the Imager1. Slide the Imager onto the index and middle fingers with the Scan Trigger next to the thumb.2. Tighten the Fingers Strap.Interface Cable ConnectorWT4090 Interface ConnectorScan Trigger4t×QFingers StrapQRG_507.fm Page 10 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 11Status IndicationsThe Imager has two Scan LEDs that provide identical indications. The Imager is also equipped with a beeper that generates sound indications in variable tones.NOTE In corded adapter configuration, beep indications are emitted only from the WT4090.Bluetooth ConnectionEstablish Bluetooth ConnectionTo establish Bluetooth connection with a mobile computer:1. Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile computer.2. Install the battery on the Imager.No. LED Beep Indication Description1. None High/low Bluetooth communication is disconnected2. Short green flashes None Attempting to connect over Bluetooth3. None Low/high Imager is connected over Bluetooth4. None High/low Bluetooth communication is disconnected - Imager is out of range5. None high/low/high/low Properly decoded scan of Bluetooth pairing Barcode6. None Long low/long high/ Bluetooth connection attempt failed7. None Long low/long high/Long low/long high/Bluetooth connection attempt is rejected8. One green flash High Proper scanning indication9. None 4 long beeps No Bluetooth communication after scanning time-outQRG_507.fm Page 11 Wednesday, January 28, 2009 8:37 PM
12 RS507 Hands-Free Imager3. Launch the Bluetooth Device (BD) Address application on the mobile computer. Most BD Address applications display a pairing barcode image on the screen of the mobile computer.4. Scan a pairing barcode form the mobile computer screen or any provided label. When scanning, the Imager emits one string of high/low/high/low beeps.5. The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a mobile computer.6. When connection is established, the Scan LED turns Off and the Imager emits one string of low/high beeps. The Imager is connected and ready for scanning.NOTE When replacing the Imager battery, the Imager memory retains the pairing information of last paired mobile computer (e.g WT4090).Remove Bluetooth Connection1. Scan an unpairing barcode label with the Bluetooth address for disconnecting the Imager from the mobile computer (e.g WT4090). 2. The Imager emits one string of high/low beeps indicating that Bluetooth communication with the mobile computer is disconnected.Restore Lost Bluetooth ConnectionThe Imager maintains Bluetooth communication with a mobile computer within a range of 10 meters (30 feet). When the Imager fails to establish connection or connection is lost during operation, the Imager emits one string of low/high beeps.To reestablish Bluetooth connection with a mobile computer (e.g WT4090):1. Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile computer.2. Ensure that the mobile computer is On and “awake” (not in Suspend mode).3. The Imager automatically attempts reconnecting to the mobile computer for 30 seconds (Scan LED flashes green). If automatic re-connection fails, verify that the Imager is within Bluetooth range and briefly press the Restore Key on the Imager to reconnect.4. The Scan LED starts flashing green indicating that the Imager is attempting to establish connection with a mobile computer (e.g WT4090).5. The Scan LED turns Off and the Imager emits one string of low/high beeps indicating that the Imager is connected and ready for scanning.QRG_507.fm Page 12 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 13ScanThe Imager uses digital camera technology to take a picture of a barcode and software decoding algorithms are executed to extract the barcode data from the image.Scan Triggering ModesManual Triggering (Triggered models only)1. Launch a scanning software application on the mobile computer or WT4090. 2. Press the Scan Trigger and position the aiming cross hair laser to cover the barcode. The Imager takes a digital picture (image) of the barcode and stores it in memory for decoding. 3. One green flash and a high beep sounds to indicate that the barcode was properly decoded. NOTE In some configurations proper decoding of a barcode is indicated by software application running on mobile computer or WT4090.Auto-triggering (Triggered models only)The Imager is provided with auto-triggering capability.In auto-triggering mode, both motion and proximity sensors are used to trigger the Imager when the user intends to scan a barcode.With auto-triggering activated, the Imager automatically scans when motion stops and a barcode is placed within the depth of field of the Imager. The Imager scans the barcode and turns off to conserve power.To scan barcode in auto-triggering mode:1. Bring the Imager within 9 inches ± 1 inch (22.86 cm ± 2.54 cm) of a barcode label.2. Hold the Imager steady, aiming at the barcode label.3. The Imager takes a picture (image) of the barcode and stores it in memory for decoding.4. One green flash of the Scan LED and a high beep indicates that a barcode was properly decoded.NOTE In some configurations, proper decoding of a barcode is indicated by a software application running on mobile computer or WT4090.QRG_507.fm Page 13 Wednesday, January 28, 2009 8:37 PM
14 RS507 Hands-Free ImagerAiming the ImagerThe aimer of the Imager is a cross hair laser with bright center dot (shown below). The virtual rectangle made by the Cross Hair Lines reflects the field of view of the Imager. The aimer is used to position the barcode or object within the field of view.1. Enter the symbol in any orientation within the virtual rectangle made by the cross hair lines.The imager can also read a barcode presented within the aiming pattern but not centered, such as the figure below on the left. The figure on the right, however, may not be decoded.The aiming pattern is smaller when the Imager is closer to the symbol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the unit and those with larger bars or elements (mil size) farther from the unit.2. Hold the Imager between two and eleven inches (depending on symbol density) from the symbol, centering the aiming pattern cross hairs on the symbol.3. Press the Scan Button. The aimer pattern illuminates red indicating that the Laser is on. One green flash of the Scan LED and a high beep indicates that a barcode was properly decoded.Virtual rectangle made by the Cross Hair LinesCross Hair Lines of Imager Aimer PDF417 SymbolLinear BarcodeSymbolAimer Pattern@1234@@1234@ @1234@WrongRightQRG_507.fm Page 14 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 15Customize the Imager BehaviorThe Imager behavior can be configured by scanning custom barcode tables. The following table provides examples of configurable Imager features.Feature Description Default SettingBeep on reconnection attemptWhen this parameter is enabled, the Imager emits a low/high beep when Bluetooth link is reconnected.The beep on reconnection attempt feature is disabled by default.Motion sensing When this parameter is enabled, the Imager automatically scans when motion stops in front of the Imager and a barcode is placed within the depth of field of the Imager.Motion sensing is set by default to on for triggerless models and off for triggered models.Proximity sensing When this parameter is enabled, the Imager automatically scans when sensing proximity to an object and a barcode is placed within the depth of field of the Imager.Proximity sensing is set by default to on for trigger less models and off for triggered models.Proximity distance When using proximity sensing, you can set proximity distance to Short, Mid or Long. Proximity distance is set to Long by default.Low battery indication When this parameter is enabled, the Imager flashes red every 15 seconds when battery power is low.Low battery indication is disabled by default.Bluetooth auto connect The Imager automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. This can happen if the Imager goes out of the mobile computer range.The following auto connect options are available: “None”, “On power up”, “Back in Bluetooth range”, “On power up & back in Bluetooth range”.Bluetooth auto connect is set to “Back in Bluetooth range” by default.QRG_507.fm Page 15 Wednesday, January 28, 2009 8:37 PM
16 RS507 Hands-Free ImagerTroubleshootingProblem Cause SolutionLaser aimer does not display when pressing the Scan TriggerCorded: Interface cable is not secureCordless: Battery is not chargedVerify that the interface cable is properly connected Replace or charge batteryPower is not applied to ImagerCorded: Verify that the mobile computer (e.g WT4090) has a charged battery installedCordless: Replace or Charge Imager batteryScan application on the mobile computer (e.g WT4090) is not functioningRestart the scanning application on the mobile computer (e.g WT4090)Imager software does not respond Reset the Imager (See Resetting the Imager on page 17)Imager does not decode a barcode Barcode is unreadable Verify that the barcode is not defective, i.e., smudged or brokenExit window is dirty Clean exit window with a lens tissue. Tissues for eyeglasses work well. Do not use tissues coated with lotionBarcode symbology is not supported or enabledSee your system administratorCordless: Bluetooth link is disconnected Reestablish Bluetooth connection (See Establish Bluetooth Connection on page 11)QRG_507.fm Page 16 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 17Resetting the ImagerIf the Imager stops responding to input, reset it. There are two reset functions, warm boot and cold boot. Perform a warm boot first. If the Imager still does not respond, perform a cold boot.Warm BootTo perform warm boot, press and hold the Restore Key for more than six seconds.Cold BootCold boot restores the Imager’s operation by resetting it’s software. To perform cold boot, remove and re-insert the battery into the Imager. When using a corded RS507 model with WT4090, remove and reconnect the interface cable that connects between the Imager and the WT4090.QRG_507.fm Page 17 Wednesday, January 28, 2009 8:37 PM
18 RS507 Hands-Free ImagerField Replaceable PartsPart Description1 CLMPT-RS507-R Trigger Assembly2 KT-BKL-RS507-R Set of 10 Strap Buckles3 CLMPN-RS507-R Triggerless Fingers Clamp4 KT-PAD-RS507-R Set of 10 Comfort Pads5 KT-STRPN-RS507-R Set of 10 Triggerless Fingers Strap with Fingers Support6 KT-STRPT-RS507-R Set of 10 Trigger Fingers Strap with Fingers Support7 BTRY-RS50EAB00-01 Standard Battery8 BTRY-RS50EAB02-01 Extended Battery9 ADPTRWT -RS507-R Corded Adaptera123456789 Fingers SupportQRG_507.fm Page 18 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 19Comfort Pad ReplacementRemovalHold and pull Comfort Pad out of the Barcode Imager.Installation1. Position the Comfort Pad onto the Imager as shown. 2. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad “locks” into place.Trigger Assembly ReplacementRemoval1. Turn the Imager upside-down.2. Remove the Comfort Pad.3. Rotate the Trigger Assembly to align with the back of the Imager.4. Use a paper clip or similar object to press the Release Latch.5. Lift the Trigger Assembly off the scan assembly.Installation1. Turn the Imager upside-down.2. Position the Trigger Assembly to align with the back of the Imager.3. Lower the Trigger Assembly to the scan assembly.4. Rotate Trigger Assembly 1/4 turn counterclockwise.5. Press the Comfort Pad onto the Imager. When properly installed, the Comfort Pad “locks” into place.123Release LatchImager Back1Triggerless Finger Clamp 2QRG_507.fm Page 19 Wednesday, January 28, 2009 8:37 PM
20 RS507 Hands-Free ImagerNote: An optional Triggerless Finger Clamp should be installed when the Imager is intended to be used in Motion and Proximity Initiated Barcode Read mode.Fingers Strap Replacement (Trigger Assembly)Removal1. Remove the Fingers Strap from the Strap Buckle.2. Pull the Fingers Strap out of the Trigger Assembly.Installation1. Align a new Finger Strap with the Slots in the Trigger Assembly.2. Gently press the Strap Pins to engage with the Slots of the Trigger Assembly. The Strap Pins snap into the Slots.3. Slip the Fingers Strap through the Strap Buckle.Strap PinsSlots Strap Buckle Fingers StrapTrigger AssemblyQRG_507.fm Page 20 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 21Fingers Strap Replacement (Triggerless Finger Clamp)Removal1. Remove the Fingers Strap from the Strap Buckles.Installation1. Slip the Fingers Strap through the Strap Buckles.Strap Buckle ReplacementRemovalPress the Strap Buckle out of the Trigger Assembly Pin.Installation1. Align the pin slots of Strap Buckle with the pin of the Trigger Assembly.2. Gently press the pin slots of Strap Buckle to engage with the pin of the Trigger Assembly. The pin slots snaps into the pin.CleaningWipe the exit window periodically with a lens tissue or other material suitable for cleaning eyeglasses.CAUTION Do not pour, spray, or spill any liquid on the Imager.Strap Buckles Strap BuckleTrigger Assembly Pin QRG_507.fm Page 21 Wednesday, January 28, 2009 8:37 PM
22 RS507 Hands-Free ImagerThe gold plated battery contacts do not tarnish or oxidize. No maintenance should be needed. If the contacts need to be cleaned:1. Wet the tip of a cotton swab with isopropyl alcohol and squeeze the excess alcohol from the swab.2. Wipe the metal contacts with the damp swab.QRG_507.fm Page 22 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 23Regulatory InformationThis device is approved under the Enterprise Mobility business of Motorola, Inc. ("Motorola").This guide applies to Model Number RS507.All Motorola devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: www.motorola.com/enterprisemobility/support..Bluetooth® Wireless TechnologyThis is an approved Bluetooth® product. For more information or to view End Product Listing, please visit http://www.bluetooth.org/tpg/listings,cfmWireless Device Country ApprovalsRegulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe (see note below). Please refer to the Motorola Declaration of Conformity (DoC) for details of other country markings. This is available at http://www2.symbol.com/doc/.Note: For 2.4GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.CAUTION Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void the user's authority to operate the equipment. Only use Motorola approved and UL Listed accessories, battery packs and battery chargers.Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source.QRG_507.fm Page 23 Wednesday, January 28, 2009 8:37 PM
24 RS507 Hands-Free ImagerHealth and Safety RecommendationsErgonomic Recommendations• Reduce or eliminate repetitive motion• Maintain a natural position• Reduce or eliminate excessive force• Keep objects that are used frequently within easy reach• Perform tasks at correct heights• Reduce or eliminate vibration• Reduce or eliminate direct pressure• Provide adjustable workstations• Provide adequate clearance• Provide a suitable working environment • Improve work procedures.Warnings for Use of Wireless DevicesPlease observe all warning notices with regard to the usage of wireless devices.Potentially Hazardous Atmospheres - Vehicles UseYou are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Safety in HospitalsWireless devices transmit radio frequency energy and may affect medical electrical equipment.CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.QRG_507.fm Page 24 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 25Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.PacemakersPacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.Persons with Pacemakers:• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.• Should not carry the device in a breast pocket.• Should use the ear furthest from the pacemaker to minimize the potential for interference.• If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical DevicesPlease consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.RF Exposure Guidelines Safety InformationReducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied.InternationalThe device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International" human exposure to electromagnetic fields refer to the Motorola Declaration of Conformity (DoC) at http://www2.symbol.com/doc/.QRG_507.fm Page 25 Wednesday, January 28, 2009 8:37 PM
26 RS507 Hands-Free ImagerEUHandheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance.US and CanadaHandheld Devices This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. Laser DevicesComplies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001, and with EN60825-1:1994+A1:2002+A2:2001 and IEC60825-1:1993+A1:1997+A2:2001.The laser classification is marked on one of the labels on the device.Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.Class 2 laser Imagers use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.LASER LIGHTDO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT LASERSTRAHLUNG NICHT IN DEN STRAHL BLICKEN LASER KLASSE 2 LUMIÈRE LASER NE PAS REGARDER DANS LE FAISCEAU APPAREIL À LASER DE CLASSE 2 QRG_507.fm Page 26 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 27Imager LabelingBatteriesTaiwan - RecyclingEPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.Battery InformationMotorola rechargeable battery packs are designed and constructed to the highest standards within the industry.However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.Country Stamp(example)QRG_507.fm Page 27 Wednesday, January 28, 2009 8:37 PM
28 RS507 Hands-Free ImagerWhen batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.Replace the battery when a significant loss of run time is detected.Standard warranty period for all Motorola batteries is 3 months, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Motorola batteries, please visit: http:/mysymbolcare.symbol.com/battery/batbasics1.htmlBattery Safety Guidelines• The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.• Follow battery usage, storage, and charging guidelines found in the user's guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF and +104 ºF (0 ºC and +40 ºC) • Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Enterprise Mobility support.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.• Battery usage by children should be supervised.QRG_507.fm Page 28 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 29• Please follow local regulations to promptly dispose of used re-chargeable batteries.• Do not dispose of batteries in fire. • Seek medical advice immediately if a battery has been swallowed.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange for inspection.In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:QRG_507.fm Page 29 Wednesday, January 28, 2009 8:37 PM
30 RS507 Hands-Free ImagerRadio Frequency Interference Requirements-FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.Radio Transmitters (Part 15) - USAThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Radio Transmitters - CanadaThis device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada technical specifications were met.QRG_507.fm Page 30 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 31Marking and European Economic Area (EEA)Bluetooth® Wireless Technology for use through the EEA has the following restrictions:• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz• France, outside usage is restricted to 10mW EIRP• Italy requires a user license for outside usage.Statement of Compliance for Wireless DevicesMotorola hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/.Japan (VCCI) - Voluntary Control Council for InterferenceClass B ITEThis is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used QRG_507.fm Page 31 Wednesday, January 28, 2009 8:37 PM
32 RS507 Hands-Free Imagernear a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.Korea Warning Statement for Class B ITEOther CountriesDeclarações Regulamentares para RS507 - BrazilNote: The certification mark applied to the RS507 is for Restrict Radiation Equipment. This equipment operates on a secondary basis and does not have the right for protection against harmful interference from other users including same equipment types. Also this equipment must not cause interference to systems operating on primary basis.For more information consult the website www.anatel.gov.br.Nota: "A marca de certificação se aplica ao Transceptor, modelo RS507. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário."Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br.Mexico Restrict Frequency Range to: 2.450 - 2.4835 GHz.Sri Lanka- Restrict Frequency Range to: 2.400 - 2.430 GHz. Taiwan - 臺灣According to Administrative Regulations on Low Power Radio Waves Radiated Devices:Article 12Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original QRG_507.fm Page 32 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 33characteristic as well as performance to an approved low power radio-frequency devices.Article 14The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.The said legal communications means radio communications is operated in compliance with the Telecommunications Act.The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。限制頻率範圍是： 2.400 - 2.4835 GHz。 最大發射功率 : 27dBm5.250 - 5.350 GHz。5.725 - 5.850 GHz。2.4GHz： 11 個通道50 GHzKoreaQRG_507.fm Page 33 Wednesday, January 28, 2009 8:37 PM
34 RS507 Hands-Free ImagerWaste Electrical and Electronic Equipment (WEEE)English: For EU Customers: All products at the end of their life must be returned to Motorola for recycling. For information on how to return product, please go to: www.motorola.com/recycling/weee.Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Motorola за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: www.motorola.com/recycling/weee.Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: www.motorola.com/recycling/weee.Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Motorola zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter www.motorola.com/recycling/weee.Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: www.motorola.com/recycling/weee.Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Motorola al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: www.motorola.com/recycling/weee.Français: Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : www.motorola.com/recycling/weee.Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: www.motorola.com/recycling/weee.QRG_507.fm Page 34 Wednesday, January 28, 2009 8:37 PM
Quick Reference Guide 35Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a www.motorola.com/recycling/weee weboldalra.Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Motorola te worden teruggezonden voor recycling. Raadpleeg www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten.Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Motorola para reciclagem. Para obter informações sobre como devolver o produto, visite: www.motorola.com/recycling/weee.Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Motorola pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: www.motorola.com/recycling/weee.Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Motorola za reciklažo. Za informacije o vraèilu izdelka obišèite: www.motorola.com/recycling/weee.Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa www.motorola.com/recycling/weee.Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Motorola för återvinning. Information om hur du returnerar produkten finns på www.motorola.com/recycling/weee.QRG_507.fm Page 35 Wednesday, January 28, 2009 8:37 PM
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at:www.motorola.com/enterprisemobility/support.For the latest version of this guide go to:www.motorola.com/enterprisemobility/manuals.Motorola, Inc.One Motorola PlazaHoltsville, New York 11742, USA1-800-927-9626http://www.motorola.comMOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc. 200972-115988-01 Revision A - January 2009@72-115988-01@Service InformationQRG_507.fm Page 36 Wednesday, January 28, 2009 8:37 PM

Navigation menu