Zebra Technologies RS6000 Ring Scanner User Manual

Zebra Technologies Corporation Ring Scanner

User Manual.pdf

Ring Scanner
Zebra reserves the right to make changes to any product to improve reliability,
function, or design. Zebra does not assume any product liability arising out of,
or in connection with, the application or use of any product, circuit, or
application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering or
relating to any combination, system, apparatus, machine, material, method,
or process in which Zebra products might be used. An implied license exists
only for equipment, circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s
network and run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the
equipment, they will contact the Zebra Global Customer Support at:
http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation, Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered
in many jurisdictions worldwide. All other trademarks are the property of
their respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies
Corporation. All rights reserved.
RS6000
Regulatory Guide
MN-002703-01 Revision A — March 2016
Regulatory Information
For devices with Symbol, or Symbol Technologies
Inc., etc. on the Manufacturing Label and for
devices manufactured at Reynosa, or any other
Zebra factory facilities:
This device is approved under Zebra Technologies
Corporation.
This guide applies to Model Number RS6000.
All Zebra devices are designed to be compliant
with the rules and regulations in the locations they
are sold and will be labeled as required.
Local language translations are available at the
following website: http://www.zebra.com/support.
Any changes or modifications to Zebra equipment
not expressly approved by Zebra could void the
user's authority to operate the equipment.
Bluetooth® Wireless
Technology
This is an approved Bluetooth® product. For more
information or to view the End Product Listing,
please visit
http://www.bluetooth.org/tpg/listings.cfm
Wireless Device Country
Approvals
Regulatory markings subject to certification are
applied to the device signifying the radio(s) is/are
approved for use in the following countries and
continents: United States, Canada, Japan, China,
South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC)
for details of other country markings. This is
available at http://www.zebra.com/doc.
Health and Safety
Recommendations
Ergonomic Recommendations
Reduce or eliminate repetitive motion
Maintain a natural position
Reduce or eliminate excessive force
Keep objects that are used frequently within
easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the
manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer
about any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place
objects, including either installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Position the device within easy reach. Be able to
access the device without removing your eyes from
the road.
For Safe installation
Do not put your phone in a location that
obstructs the drivers vision or interferes with the
operation of the Vehicle.
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving.
Jotting down a 'to do' list or flipping through your
address book takes attention away from your
primary responsibility; driving safely.
When driving a car, driving is your first
responsibility - Give your full attention to driving.
Check the laws and regulations on the use of
wireless devices in the areas where you drive.
Always obey them.
Warnings for Use of
Wireless Devices
Please observe all warning notices with regard to
the usage of wireless devices.
Safety in Aircraft
Switch off your wireless device whenever you are
instructed to do so by airport or airline staff. If your
device offers a 'flight mode' or similar feature,
consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy
and may affect medical electrical equipment.
Wireless devices should be switched off wherever
you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed
to prevent possible interference with sensitive
medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a
minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are
consistent with independent research and
recommendations by Wireless Technology
Research.
Persons with Pacemakers:
Should ALWAYS keep the device more than
15cm (6 inches) from their pacemaker when
turned ON.
Should not carry the device in a breast pocket.
Should use the ear furthest from the pacemaker
to minimize the potential for interference.
If you have any reason to suspect that
interference is taking place, turn OFF your
device.
Other Medical Devices
Please consult your physician or the manufacturer
of the medical device, to determine if the operation
of your wireless product may interfere with the
medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the
instructions supplied.
International
The device complies with internationally
recognized standards covering human exposure to
electromagnetic fields from radio devices. For
information on 'International' human exposure to
electromagnet fields, refer to the Zebra Declaration
of Conformity (DoC) at:
http://www.zebra.com/doc.
For further information on the safety of RF energy
from wireless devices, see
http://responsibility.zebra.com/index.php/
downloads/, which is located under Wireless
Communications and Health.
EU
Handheld Devices
To comply with EU RF exposure requirements, this
device must be operated in the hand with a
minimum separation distance of 0.0 cm or more
from a person's body. Other operating
configurations should be avoided.
US and Canada
Co-located statement
To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter
must not be co-located or operating in conjunction
with any other transmitter/antenna except those
already approved in this filling.
Handheld Devices
To comply with FCC RF exposure requirements,
this device must be operated in the hand with a
minimum separation distance of 0.0 cm or more
from a person's body. Other operating
configurations should be avoided.
Important: Radiation Exposure Statement: This
equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 0.0 cm between the
radiator and your body.
Importante: Cet équipement est conforme aux
limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un
minimum de 0.0 cm de distance entre la source de
rayonnement et votre corps.
Laser Devices
The laser classification is marked on one of the
labels on the device.
Class 2 laser scanners use a low power, visible
light diode. As with any very bright light source,
such as the sun, the user should avoid staring
directly into the light beam. Momentary exposure to
a Class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or
performance of procedures other than those
specified herein may result in hazardous laser light
exposure.
Label Reads:
1. LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT.
2. CAUTION - CLASS 2 LASER LIGHT WHEN
OPEN. DO NOT STARE INTO THE BEAM.
3. COMPLIES WITH 21 CFR1040.10 AND
1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50,
DATED JUNE 24, 2007, AND IEC 60825-1
(Ed.2.0), EN60825-1:2007 AND IEC/EN 60825-
1:2014.
LED Devices
For LED devices which have been evaluated to
IEC 62471 and comply with the Exempt Risk
Group, no product labeling requirements apply.
However, the following statement is required to
comply with US and international regulations:
LED Compliance Statement
Classified as 'EXEMPT RISK GROUP' according
to IEC 62471:2006 and EN 62471:2008.
Pulse duration: 1.7 ms.
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry
battery producing or importing
firms in accordance with Article
15 of the Waste Disposal Act are required to
indicate the recycling marks on the batteries used
in sales, giveaway, or promotion. Contact a
qualified Taiwanese recycler for proper battery
disposal.
Battery Information
Use only Zebra approved batteries. Accessories
which have battery charging capability are
approved for use with the following battery models:
Part Number BT000262A01 (3.6 VDC, 3350 mAh).
Zebra approved rechargeable battery packs are
designed and constructed to the highest standards
within the industry.
However, there are limitations as to how long a
battery can operate or be stored before needing
replacement. Many factors affect the actual life
cycle of a battery pack such as heat, cold, harsh
environmental conditions, and severe drops.
When batteries are stored over six months, some
irreversible deterioration in overall battery quality
may occur. Store batteries at half of full charge in a
CAUTION
Only use Zebra approved and UL
Listed accessories, battery packs, and battery
chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.
Declared maximum operating temperature: 50°C.
NOTE Europe includes Austria, Belgium,
Bulgaria, Croatia, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden,
Switzerland, and the United Kingdom.
CAUTION Operation of the device without
regulatory approval is illegal.
CAUTION In order to avoid or minimize the
potential risk of ergonomic injury, follow the
recommendations below. Consult with your
local Health and Safety Manager to ensure
that you are adhering to your company's
safety programs to prevent employee injury.
NOTE Connection to an alert device that will
cause a vehicle horn to sound or lights to flash
on receipt of a call on public roads is not
permitted.
IMPORTANT Before installing or using, check
state and local laws regarding windshield
mounting and use of equipment.
COMPLIES WITH 21
CFR1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE
NO. 50, DATED JUNE 24, 2007,
AND IEC 60825-1 (Ed.2.0),
EN60825-1:2007 AND IEC/EN
60825-1:2014. NMB-003 DU CANADA.
CAN ICES-3 (B) /NMB-3 (B)
CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT
STARE INTO THE BEAM. ATTENTION- LUMIÉRE L AS ER D E CL AS SE
2 EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU. VORSICHT-
LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL
BLICKEN.
5.4 VDC 1 A
IC: 109AN-RS6000FCC ID: UZ7RS6000
0560
LASER LIGHT-DO NOT STARE INTO
BEAM. CLASS 2 LASER PRODUCT.
LASERLICHT - NICHT IN DEN STRAHL
BLICKEN. LASER KLASSE 2. LUMIÈRE
LASER - NE PAS REGARDER DANS
LE FAISCEAU. APPAREIL À LASER
DE CLASSE 2. 630-680nm,1mW
REVIEW ONLY
dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts,
and electrolyte leakage. When storing batteries for
one year or longer, the charge level should be
verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run
time is detected.
Standard warranty period for all Zebra batteries is
one year, regardless if the battery was purchased
separately or included as part of the mobile
computer or bar code scanner. For more
information on Zebra batteries, please visit:
http://www.zebra.com/batterybasics.
Battery Safety Guidelines
The area in which the units are charged should
be clear of debris and combustible materials or
chemicals. Particular care should be taken
where the device is charged in a non-
commercial environment.
Follow battery usage, storage, and charging
guidelines found in the user's guide.
Improper battery use may result in a fire,
explosion, or other hazard.
To charge the mobile device battery, the battery
and charger temperatures must be between
+32 ºF and +104 ºF (0 ºC and +40 ºC).
Do not use incompatible batteries and chargers.
Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or
other hazard. If you have any questions about
the compatibility of a battery or a charger,
contact Zebra support.
Do not disassemble or open, crush, bend or
deform, puncture, or shred.
Severe impact from dropping any battery-
operated device on a hard surface could cause
the battery to overheat.
Do not short circuit a battery or allow metallic or
conductive objects to contact the battery
terminals.
Do not modify or remanufacture, attempt to
insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to
fire, explosion, or other hazard.
Do not leave or store the equipment in or near
areas that might get very hot, such as in a
parked vehicle or near a radiator or other heat
source. Do not place battery into a microwave
oven or dryer.
Battery usage by children should be supervised.
Please follow local regulations to promptly
dispose of used re-chargeable batteries.
Do not dispose of batteries in fire.
Seek medical advice immediately if a battery
has been swallowed.
In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes. If
contact has been made, wash the affected area
with large amounts of water and seek medical
advice.
If you suspect damage to your equipment or
battery, contact Zebra support to arrange for
inspection.
Radio Frequency Interference
Requirements-FCC
Note: This equipment has been
tested and found to comply with
the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment
and receiver
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help.
Radio Transmitters (Part 15) - USA
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received including interference that
may cause undesired operation.
Radio Frequency Interference Requirements -
Canada
This Class B digital apparatus complies with
Canadian CAN ICES-3 (B)/NMB-3(B).
Cet appareil numérique de la classe B est
conforme à la norme CAN ICES-3 (B)/NMB-3(B)
du Canada.
Marking and European
Economic Area (EEA)
Bluetooth® Wireless Technology for use through
the EEA has the following restrictions:
Maximum radiated transmit power of 100mW
EIRP in the frequency range 2.400 -2.4835
GHz.
The use of RFID Devices has varying restrictions
for use within the EEA; please refer to the Zebra
Declaration of Conformity (DoC) for details at
http://www.zebra.com/doc.
Statement of Compliance for Wireless
Devices
Zebra hereby declares that this radio equipment is
in compliance with Directive 2011/65/EU and 1999/
5/EC or 2014/53/EU (2014/53/EU supersedes
1999/5/EC from 13th June 2017). A Declaration of
Conformity may be obtained from
http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for
Interference
Korea Warning Statement for Class B ITE
Other Countries
Declarações Regulamentares para RS6000 -
Brazil
For more information consult the website
http://www.anatel.gov.br.
Nota: A marca de certificação se aplica ao
Transceptor, modelo RS6000. Este equipamento
opera em caráter secundário, isto é, não tem
direito a proteção contra interferência prejudicial,
mesmo de estações do mesmo tipo, e não pode
causar interferência a sistemas operando em
caráter primário.
Para maiores informações sobre ANATEL consulte
o site: http://www.anatel.gov.br.
Este equipamento opera em caráter secundário,
isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do
mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
Chile
Este equipo cumple con la Resolución No 403 de
2008, de la Subsecretaria de telecomunicaciones,
relativa a radiaciones electromagnéticas.
Conforme a Resolución 755 parte j.1), se ajustará
el dispositivo a operar en interiores en las
siguientes bandas con una potencia máxima
radiada no superior a 150mW:
2.400 hasta 2.483,5 MHz
China
通过访问以下网址可下载当地语言支持的产品说明
http://www.zebra.com
电池安全警示:
警告:勿拆装,短路,撞挤压或者投入火
及水中;
注意:如果电池被不正确型号替,或出
会存在爆炸及其他危险
明处置使用的电池
Eurasian Customs Union
Евразийский Таможенный Союз
Данный продукт соответствует требованиям
знака EAC.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
South Korea
해당 무선설비는 운용 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로 인
명안전과 관련된 서비스는 할 수 없습니다
Taiwan -
臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公
司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合
法通信;經發現有干擾現象時,應立即停用,並改
善至無干擾時方得繼續使用。
前項合法通信,指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
Turkey
Bu cihaz Türkçe karakterlerin tamamını ihtiva eden
ETSI TS 123.038 V8.0.0 (veya sonraki
sürümünkodu) ve ETSI TS 123.040 V8.1.0 (veya
sonraki sürümün kodu) teknik özelliklerine
uygundur.
Ukraine
Дане обладнання відповідає вимогам технічного
регламенту 1057, 2008 на обмеження
щодо використання деяких небезпечних
речовин в електричних та електронних
пристроях.
Thailand

 .
Waste Electrical and Electronic
Equipment (WEEE)
English: For EU Customers: All products at the end of their
life must be returned to Zebra for recycling. For information
on how to return product, please go to:
http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits
en fin de cycle de vie doivent être retournés à Zebra pour
recyclage. Pour de plus amples informations sur le retour de
produits, consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los
productos deberán entregarse a Zebra al final de su ciclo de
vida para que sean reciclados. Si desea más información
sobre cómo devolver un producto, visite:
http://www.zebra.com/weee.
Български: За клиенти от ЕС: След края на полезния им
живот всички продукти трябва да се връщат на Zebra за
рециклиране. За информация относно връщането на
продукти, моля отидете на адрес:
http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte
müssen am Ende ihrer Lebensdauer zum Recycling an
Zebra zurückgesandt werden. Informationen zur
Rücksendung von Produkten finden Sie unter
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a
Zebra al fine di consentirne il riciclaggio. Per informazioni
sulle modalità di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim
de vida devem ser devolvidos à Zebra para reciclagem. Para
obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen
aan het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg
http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty
wycofane z eksploatacji należy zwrócić do firmy Zebra w
celu ich utylizacji. Informacje na temat zwrotu produktów
znajdują się na stronie internetowej
http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Zebra
k recyklaci. Informace o zpùsobu vrácení produktu najdete
na webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta
külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement
terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás
céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.zebra.com/weee
weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått
sin livslängd måste returneras till Zebra för återvinning.
Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet
on palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta
ei enää käytetä. Lisätietoja tuotteen palauttamisesta on
osoitteessa http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til
Zebra til recirkulering, når de er udtjent. Læs oplysningerne
om returnering af produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο
τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται
στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες
σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη
διεύθυνση http://www.zebra.com/weee στο ∆ιαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-
aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand
Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek
tirritorna l-prodott, jekk jogħġbok żur:
http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la
sfârşitul duratei lor de funcţionare, trebuie returnate la Zebra
pentru reciclare. Pentru informaţii despre returnarea
produsului, accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za
informacije o vračilu izdelka obiščite:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky
musia byť po uplynutí doby ich životnosti vrátené spoločnosti
Zebra na recykláciu. Bližšie informácie o vrátení výrobkov
nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas
mūža beigām ir jānogādā atpakaļ Zebra otrreizējai
pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu
Zebra, lūdzu, skatiet: http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm
ürünler geri dönüştürme için Zebra'ya iade edilmelidir.
Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu
adresi ziyaret edin: http://www.zebra.com/weee.
TURKISH WEEE Statement of Compliance for
All Devices
EEE Yönetmeliğine Uygundur Complies with EEE.
CMM Disclosure
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量
均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中
的含量超出 GB/T 26572 规定的限量要求。( 企业可
在此处,根据实际情况对上表中打 “×” 的技术原
因进行进一步说明。
This table was created to comply with China RoHS
requirements.
CAUTION Risk of explosion if battery is
replaced by an incorrect type. Dispose of
batteries according to instructions.
기 종 별 사 용 자 안 내 문
B급
(가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합
기기로서 주로 가정에서 사용하는
을 목적으로 하며, 모든 지역에서 사
용할 수 있습니다.
部件名称
(Parts)
有害物质
(Pb)
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
金属部件
(Metal Parts)
XOO O O O
电路模块
(Circuit Modules)
XOO O O O
电缆及电缆组件
(Cables and Cable
Assemblies)
OOO O O O
塑料和聚合物部
(Plastic and
Polymeric Parts)
OOO O O O
光学和光学组件
(Optics and Optical
Components)
OOX O O O
电池
(Batteries)
OOO O O O
placeholder
REVIEW ONLY

Navigation menu