Zebra Technologies SB1 SMART BADGE User Manual SB1 User Guide P N 72E 164711 01 Rev 082312
Zebra Technologies Corporation SMART BADGE SB1 User Guide P N 72E 164711 01 Rev 082312
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
USERS MANUAL 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1792608 |
| Application ID | Umn86xB4YML/CUIHu8sY7w== |
| Document Description | USERS MANUAL 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 462.73kB (5784148 bits) |
| Date Submitted | 2012-09-14 00:00:00 |
| Date Available | 2013-03-13 00:00:00 |
| Creation Date | 2012-08-23 17:07:20 |
| Producing Software | Acrobat Distiller 10.1.4 (Windows) |
| Document Lastmod | 2012-08-23 17:50:38 |
| Document Title | SB1 User Guide (P/N 72E-164711-01 Rev. 082312) |
| Document Creator | FrameMaker 10.0.2 |
| Document Author: | Motorola Solutions, Inc. |
PR EL IN AR SB1 SMART BADGE USER GUIDE PR EL AR IN AR SB1 SMART BADGE USER GUIDE PR EL IN 72E-164711-01 Rev. 082312 August 2012 SB1 User Guide No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. AR The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software and firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. IN Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. EL No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. PR ii iii Revision History Changes to the original guide are listed below: Change Date Description 06/04/12 Draft. Rev. 080612 08/06/12 Draft 2 PR EL IN AR Rev. 060412 EL IN AR SB1 User Guide PR iv AR TABLE OF CONTENTS IN Revision History .............................................................................................................................. iii ix ix ix ix xi xi Chapter 1: Getting Started Unpacking the SB1 ........................................................................................................................ Features ......................................................................................................................................... SB1 Startup .................................................................................................................................... Charging .................................................................................................................................. WLAN Setup .................................................................................................................................. Resetting the SB1 .......................................................................................................................... Powering Off the SB1 .................................................................................................................... 1-1 1-2 1-3 1-3 1-5 1-6 1-6 Chapter 2: Operation Wearing the SB1 ............................................................................................................................ Lanyard .................................................................................................................................... Holster ...................................................................................................................................... Armband .................................................................................................................................. Entering Data ................................................................................................................................. Using a Headset ............................................................................................................................ Using the Speaker Adapter ............................................................................................................ Home Screen ................................................................................................................................. Notifications ............................................................................................................................. Locking the SB1 ....................................................................................................................... 2-1 2-1 2-2 2-2 2-3 2-4 2-6 2-7 2-8 2-9 PR EL About This Guide Introduction ..................................................................................................................................... Documentation Set ................................................................................................................... Configurations................................................................................................................................. Software Versions ..................................................................................................................... Chapter Descriptions ...................................................................................................................... Notational Conventions................................................................................................................... Related Documents and Software .................................................................................................. Service Information ......................................................................................................................... vi SB1 User Guide 2-9 2-10 2-11 2-11 2-11 2-12 2-13 2-13 2-13 2-14 2-14 2-14 2-14 2-16 2-16 2-17 2-17 2-18 2-18 2-18 2-18 2-19 2-19 IN AR Setting User Profile .................................................................................................................. Enter Name and Title ......................................................................................................... Sign Out ............................................................................................................................. Switch Device .................................................................................................................... Applications .............................................................................................................................. Settings .................................................................................................................................... Adjusting the Volume ......................................................................................................... TEAM Express Settings ..................................................................................................... Screen Calibration ............................................................................................................. Beeper Settings ................................................................................................................. RD Client ............................................................................................................................ Fusion Settings .................................................................................................................. Set Time and Date ............................................................................................................. TEAM Express Voice Client ........................................................................................................... PTT Audible Indicators ............................................................................................................. TEAM Express Voice Client Configuration .............................................................................. Enable Voice Client Communication .................................................................................. Select a Talk Group ........................................................................................................... Disable TEAM Express Voice Client Communication ........................................................ PPT Communication ................................................................................................................ Group Broadcast (One to Many) ........................................................................................ Response to a Group Broadcast ........................................................................................ Private Response (One to One) ......................................................................................... EL Chapter 3: Data Capture Introduction .................................................................................................................................... 3-1 Scanning Considerations ............................................................................................................... 3-1 Bar Code Reading ......................................................................................................................... 3-2 4-1 4-2 4-4 4-6 4-8 4-9 4-11 4-13 Chapter 5: Maintenance & Troubleshooting Introduction .................................................................................................................................... Maintaining the SB1 ....................................................................................................................... Battery Safety Guidelines .............................................................................................................. Cleaning ......................................................................................................................................... Approved Cleanser Active Ingredients ..................................................................................... Harmful Ingredients .................................................................................................................. Cleaning Instructions ............................................................................................................... Special Cleaning Notes ............................................................................................................ 5-1 5-1 5-1 5-2 5-3 5-3 5-3 5-3 PR Chapter 4: Accessories Introduction .................................................................................................................................... Single Slot Charging Cradle .......................................................................................................... Ten Slot Charge Only Cradle ......................................................................................................... Audio Adapter ................................................................................................................................ Speaker Adapter ............................................................................................................................ Holster ........................................................................................................................................... Armband ........................................................................................................................................ Lanyard .......................................................................................................................................... Table of Contents AR Materials Required ................................................................................................................... Cleaning the SB1 ..................................................................................................................... Housing .............................................................................................................................. Display ............................................................................................................................... Exit Window ....................................................................................................................... Connector ........................................................................................................................... Cleaning Cradle Connectors .................................................................................................... Cleaning Frequency ................................................................................................................. Troubleshooting ............................................................................................................................. SB1 .......................................................................................................................................... Single Slot Charging Cradle ..................................................................................................... Ten Slot Charge Only Cradle ................................................................................................... Audio Adapter .......................................................................................................................... Speaker Adapter ...................................................................................................................... 5-3 5-3 5-3 5-3 5-3 5-4 5-4 5-4 5-5 5-5 5-6 5-7 5-7 5-7 IN Appendix A: Specifications SB1 Technical Specifications ......................................................................................................... A-1 Glossary PR EL Index vii SB1 User Guide PR EL IN AR viii AR ABOUT THIS GUIDE IN Introduction This guide provides information about using the SB1 smart badge and accessories. Screens and windows pictured in this guide are samples and may differ from actual screens. NOTE Documentation Set EL The documentation set for the SB1 is divided into guides that provide information for specific user needs. • SB1 Regulatory Guide - provides all regulatory and safety information. • SB1 User Guide - describes how to use the SB1. PR • SB1 Integrator Guide - describes how to set up the SB1 and accessories. Configurations This guide covers the following configurations: Configuration SB1 Radios WLAN: 802.11 b/g/n Display E Ink® touch screen Memory 128 MB RAM/ 128 MB Flash Data Capture Bar code reader Software Versions This guide covers various software configurations and references are made to software versions. To view the software versions: 1. Press the Home button. x SB1 User Guide 2. Touch . The Settings screen appears. 3. Touch . The More Settings screen appears. 4. Touch Software Version. The Software Version screen lists the RhoElements and SB1 Shell versions. Chapter Descriptions AR Topics covered in this guide are as follows: • Chapter 1, Getting Started, describes the SB1’s physical characteristics, how to charge the SB1 and how to start the SB1 for the first time. • Chapter 2, Operation, provides basic instructions for using the SB1 and navigating the SB1 Shell. • Chapter 3, Data Capture provides instructions for using the SB1 to capture data using the bar code reader. • Chapter 4, Accessories, describes the accessories available for the SB1 and how to use the accessories with the SB1. IN • Chapter 5, Maintenance & Troubleshooting, includes instructions on cleaning and storing and provides troubleshooting solutions for potential problems during SB1 operation. Notational Conventions • Appendix A, Specifications, includes a table listing the technical specifications for the SB1. EL The following conventions are used in this document: • The term “SB1” refers to the Motorola SB1 smart badge. • Italics are used to highlight the following: • Chapters and sections in this and related documents • Dialog box, window and screen names PR • Drop-down list and list box names • Check box and radio button names • Icons on a screen. • Bold text is used to highlight the following: • Key names on a keypad • Button names on a screen. • Bullets (•) indicate: • Action items • Lists of alternatives • Lists of required steps that are not necessarily sequential. • Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. About This Guide xi Related Documents and Software The following items provide more information about the SB1. • SB1 Regulatory Guide, p/n 72-162415-xx • SB1 Integrator Guide, p/n 72E-164712-xx AR For the latest version of this guide and all guides, go to: http://supportcentral.motorola.com Service Information If you have a problem with your equipment, contact Motorola Solutions Global Customer Support for your region. Contact information is available at: http://www.motorolasolutions.com/contactsupport. When contacting Motorola Solutions Global Customer Support, please have the following information available: • Model number or product name IN • Serial number of the unit • Software type and version number Motorola Solutions responds to calls by email, telephone or fax within the time limits set forth in support agreements. EL If your problem cannot be solved by Motorola Solutions Global Customer Support, you may need to return your equipment for servicing and will be given specific directions. Motorola Solutions is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. PR If you purchased your product from a Motorola Solutions business partner, contact that business partner for support. Manufacturing Label Location SB1 User Guide PR EL IN AR xii AR CHAPTER 1 GETTING STARTED IN This chapter describes the SB1 physical characteristics, how to charge the SB1 and how to start the SB1 for the first time. Unpacking the SB1 Carefully remove all protective material from around the SB1 and save the shipping container for later storage and shipping. Verify that the equipment listed below is included: • SB1 (single unit or multi-unit) EL • Regulatory Guide. PR Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Solutions Global Customer Support immediately. See Service Information on page xvi for contact information. 1-2 SB1 User Guide Features The features of the SB1 are shown in Figure 1-1. Lanyard Slot AR E Ink® Display LED Scan Button EL Home Button IN Bar Code Reader PR Adapter Mounting Points Figure 1-1 SB1 smart badge I/O Contacts Charging Contacts Getting Started 1-3 Charging the SB1 CAUTION Follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. The SB1 must be charged within the 0 °C to +40 °C (32 °F to 104 °F) ambient temperature range. Figure 1-2 Out of the Box Screen IN AR Out of the box, the SB1 is off and displays the Regulatory label information. Use the Single Slot Charging cradle or Ten Slot Charge Only cradle to charge the SB1. Refer to the SB1 Integrator Guide for accessory setup information. Scan Button PR EL LED To charge the SB1, slide it into the cradle slot with the Scan button facing up. Figure 1-3 Single Slot Charging Cradle When the SB1 powers up a beep sounds and the Calibration screen displays. Carefully press and briefly hold finger tip on the center of the Calibration screen target. Repeat the procedure as the target moves and stops at different locations on the screen. SB1 User Guide AR 1-4 Figure 1-4 Calibration Screen IN After the calibration settings are input, tap the screen to save the new calibration settings. The Battery Charging screen appears and the LED indicates the SB1 battery charging status.The battery fully charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. EL Figure 1-5 Battery Charging Screen Table 1-1 LED Indicator LED SB1 not placed correctly in the cradle. The cradle is not powered. SB1 is not functioning properly. PR Off Indication Slow Blinking Amber SB1 is charging. Solid Green Charging is complete. Fast Blinking Amber Charging error. Leave the SB1 in the cradle until the LED lights green indicating that it is fully charged. When using the SB1, the battery charge falls below a predetermine level, it shuts down and displays the Battery Discharged screen. When this occurs, immediately recharge the SB1 battery by placing it into a charging cradle. 1-5 AR Getting Started Figure 1-6 Battery Discharged Screen WLAN Setup To set up the SB1 on a wireless LAN, refer to the SB1 Integrator Guide for detailed instructions. IN Resetting the SB1 EL Powering Off the SB1 If the SB1 stops responding to input, perform a reset. A reset stops all running applications and any unsaved data is lost. Simultaneously press and hold the Home and Scan buttons for five seconds. The SB1 beeps and then resets. Power off the SB1 when not using for long periods of time. Press the Home button. 2. Touch . The Settings screen appears. 3. Touch . The More Settings screen appears. 4. Touch Advanced Settings. The Advanced Settings screen appears. 5. Touch Power Off Device. 6. Touch OK. The SB1 shuts down and the Regulatory Information screen appears. PR 1. To turn the SB1 back on, press and hold the Scan and Home buttons for at least five seconds. SB1 User Guide PR EL IN AR 1-6 AR CHAPTER 2 OPERATION Wearing the SB1 IN This chapter provides basic instructions for using the SB1. The SB1 can be worn on a lanyard around the neck, in a holster on the hip or on an armband. Lanyard PR EL The lanyard provides easy access to the SB1 and allows the SB1 to be used as an employee badge when not in use. Figure 2-1 SB1 on Lanyard 2-2 SB1 User Guide The SB1 mounts onto the lanyard and can be removed and replaced with ease. An accelerometer instantly orients the screen 180° based on device position for easy viewing by customers and users. IN Figure 2-2 Installing the SB1 onto the Lanyard AR The lanyard is adjustable allowing the user to position the SB1 to a comfortable height. See Lanyard on page 4-13. Holster PR EL The holster clips onto a belt or waistband and provides a tether to secure the SB1. See Holster on page 4-9 for setup instructions. Figure 2-3 Holster on Belt Armband The armband attaches to the forearm or upper arm and provides mounting for the holster. See Armband on page 4-11 for setup instructions. 2-3 IN AR Operation Entering Data Figure 2-4 Armband PR EL The user uses the tip of their finger to select objects, enter text and accept notifications. Do not use a pen or any other object on the SB1 display. It is designed for finger friendly touch only. Figure 2-5 Entering Data on Screen 2-4 SB1 User Guide Using a Headset EL IN AR One option for Push-to-Talk (PTT) communication is using a headset. Motorola Solutions offers two types of headset accessories; earbud headset and speaker headset. The Audio Adapter is required when using a headset. Connect the headset to the Audio Adapter when wearing the SB1 on the lanyard, holster or armband. PR Figure 2-6 Using Headset with SB1 in Holster IN AR Operation PR EL Figure 2-7 Using Headset with SB1 on Lanyard Figure 2-8 Headset with SB1 on Armband 2-5 2-6 SB1 User Guide Using the Speaker Adapter The Speaker Adapter provides PTT communication. When receiving audio, the sound comes from the Speaker Adapter. When the user speaks, the microphone on the front of the SB1 captures the audio. Microphone EL IN AR PTT Button PR Figure 2-9 Using the Speaker Adapter Operation 2-7 Home Screen The Home screen provides the user access to SB1 configuration, applications, notifications and user profile settings. Press the Home button on the side of the SB1 to display the Home screen. Figure 2-10 Pressing Home Button IN AR Home Button Lock PR EL Notifications User Profile Applications Figure 2-11 Home Screen Settings Running Background Application 2-8 SB1 User Guide Table 2-1 Home Screen Icons Icon Description Notifications - Touch to open the Notification screen. A star on the icon indicates that new notifications are available. User Profile - Touch to set user profile. AR Lock - Touch to automatically lock the SB1 and displays the User screen. Applications - Touch to launch the Applications screen. Notifications IN Settings - Touch to configure SB1 settings. PR EL The SB1 displays notifications for system and application status. When a notification is received, a notification dialog box appears on the screen and a beep sounds. The user can act on the notification or dismiss it depending upon the notification. Figure 2-12 Sample Notification Dialog Box If multiple notifications are present, the SB1 displays a dialog box with each notification. AR Operation Figure 2-13 Multiple Notifications Touch one of the notifications to display its notification dialog box. Touch Locking the SB1 2-9 to close the dialog box. EL IN Touch the Lock icon to place the SB1 into badge mode. The screen automatically displays the user name and title set in the Profile screen. Figure 2-14 Lock Screen PR To return to the Home screen, press the Home button. Setting User Profile Use the Profile screen to set the user name and user title, sign out of the SB1 and switch devices. Name Text Box Title Text Box Figure 2-15 Profile Screen 2 - 10 SB1 User Guide Enter Name and Title To enter user name: In the Profile screen, touch the top text box. The Enter Name screen appears. Figure 2-16 Enter Name Screen Press the keypad keys to enter the user name. • Use • Touch • Touch to create capital letter. IN 2. AR 1. to display the numeric keypad. to display special character keypad. • To create the letter c, quickly touch three times. 3. Touch • Use [Delete] to delete the last character in the text box. to save the name. In the Profile screen, touch the lower text box. The Enter Title screen appears. PR 1. EL To enter user title: Figure 2-17 Enter Title Screen 2. Press keypad keys to enter the user title. • Use • Touch • Touch to create capital letter. to display the numeric keypad. to display special character keypad. • To create the letter c, quickly touch three times. • Use [Delete] to delete the last character in the text box. Operation 2 - 11 3. Touch to save the user title. Sign Out To be supplied. Switch Device To be supplied. AR Applications IN All applications installed on the SB1 can be accessed by touching Figure 2-18 App Launcher Screen EL The App Launcher screen displays an icon for each application. If more than six applications are installed, touch the arrow to move to the next page. Dots appear below the icons indicating the number of application pages available. Touch an icon to launch that application. When there is a running application, an and return to the last running application. appears in the title bar. Touch the PR An appears on the top corner of all running application icons. Touch the application. Figure 2-19 App Launcher Screen with Running Application to exit the App Launcher on the icon to stop that 2 - 12 SB1 User Guide Settings Use the Settings screen to control SB1 functionality. Back Menu Battery Status AR WLAN Status Beeper Volume Control Audio Volume Control TEAM Express Settings Figure 2-20 Settings Screen IN • WLAN Status - Displays the signal strength for the WLAN signal. See Table 2-2 on page 2-12. • Battery Status - Displays the battery charge level. See Table 2-3 on page 2-13. • Beeper Volume Control - Use to adjust the speaker volume. See Adjusting the Volume on page 2-13. • Audio Control - Use to control the audio volume through the Audio Adapter. See Adjusting the Volume on page 2-13. • TEAM Express Settings - Touch to configure TEAM Express for Push-to-Talk (PTT) settings. See EL TEAM Express Voice Client on page 2-16 for more information. • More Settings Menu - Touch to display additional setting options for setting the date and time, screen calibration, provisioning and wireless LAN configuration. Table 2-2 WLAN Status Status Action Excellent signal strength WLAN network is ready to use. Very good signal strength WLAN network is ready to use. Good signal strength WLAN network is ready to use. Poor signal strength WLAN network is ready to use. Performance may not be optimum. Notify the network administrator that the signal strength is “Poor”. Out-of-network range (not associated) No WLAN network connection. Notify the network administrator. PR Icon Operation 2 - 13 Table 2-3 Battery Status Icon Description 0% - [does this actually appear?] 25% AR 50% 75% 100% Adjusting the Volume to increase volume or to IN To adjust the beeper volume and the audio volume on the SB1, touch decrease volume. TEAM Express Settings Screen Calibration Use the TEAM Express Setting to enable TEAM Express for PTT and select a channel. For information on using TEAM Express see TEAM Express Voice Client on page 2-16. EL If when touching the screen misalignment is observed, the user can re-calibrate the screen. On the Settings screen, touch 2. Touch Calibrate Screen. 3. Carefully press and briefly hold finger tip on the center of the target. Repeat the procedure as the target moves and stops at different locations on the screen. This enters the new calibration settings. PR 1. Figure 2-21 Calibration Screen 4. Once all of the new calibration settings are input, tap the screen to save the new calibration settings. 2 - 14 SB1 User Guide Beeper Settings To set the alerts on the SB1. The user can select the type of notification that produces an audio alert: Touch . The Settings screen appears. 2. Touch . The Advanced Settings screen appears. 3. Touch Beeper Settings. 4. Touch the System, Server or Application radio button to enable or disable the beeper sound when a notification occurs. 5. Touch to return to the Home screen. RD Client AR 1. Use the RD Client to provision the SB1. Refer to the SB1 Smart badge Integrator Guide for more information. Fusion Settings Set Time and Date To set the time and date on the SB1: IN Use the Fusion Settings to configure the SB1 to access the WLAN. Refer to the SB1 Smart badge Integrator Guide for more information. Touch . The Settings screen appears. 2. Touch . The More Settings screen appears. 3. Touch Advanced Settings. The Advanced Settings screen appears. 4. Touch Date and time. The Set date and time screen appears. PR EL 1. Figure 2-22 Date and Time Screen 5. Touch the Date field. The Today screen appears. Figure 2-23 Today Screen to delete the current date. AR Operation 2 - 15 6. Touch 7. Use the keypad to enter the new date in the format DD/MM/YYY. 8. Touch 9. Touch the Time field. The Now screen appears. EL IN . The Set date and time screen appears. Figure 2-24 Now Screen to delete the current time. PR 10. Touch 11. Use the keypad to enter the new date in the format HH:MM. 12. Touch . The Set date and time screen appears. 13. Touch the Time Zone field. The Timezone screen appears. 14. Use the up and down arrows to scroll to the time zone. 15. Touch the time zone option. 16. Touch to return to the Advanced Settings screen. 2 - 16 SB1 User Guide TEAM Express Voice Client TEAM Express Voice Client creates PTT communication capability between disparate enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, TEAM Express delivers simple PTT communication without the need of a voice communication server. AR The Speaker Adapter or Audio Adapter and a Headset the is required for PPT communication. See Chapter 4, Accessories for information on installing the adapters. Figure 2-25 Speaker Adapter IN PTT Button Volume Control PR EL PTT Button Volume Control PTT Button Figure 2-26 Headsets PTT Audible Indicators The following tones provide helpful cues when using the voice client. • Talk Tone: Double chirp. Plays when the broadcast (or private) button is depressed. This is a prompt for the user to start talking. • Access Tone: Single beep. Plays when another user just finished a broadcast or response to the user. The user is now able to initiate a Group Broadcast or Private Response. • Busy Tone: Continuous tone. Plays when the broadcast (or private) button is depressed and another user is already communicating on the same talkgroup. Operation 2 - 17 • Network Tone: • Three increasing beeps. Plays when TEAM Express is acquiring the WLAN connection and ready for voice communication. • Three decreasing beeps. Plays when TEAM Express has lost the WLAN connection and is not ready for voice communication. TEAM Express Voice Client Configuration To enable the PTT communication: AR Enable Voice Client Communication 1. Press the Home button to display the Home screen. 2. Touch 3. Touch TEAM Express settings. The TEAM Express screen appears. EL IN . The Settings screen appears. Figure 2-27 TEAM Express Screen Touch Voice Client Status. PR 4. Figure 2-28 Voice Client Status Screen 5. Touch Enable. 6. Touch Save. 7. Touch 2 - 18 SB1 User Guide Select a Talk Group One of 21 talk groups can be selected by TEAM Express users. However, only one talk group may be enabled at a time on the SB1. Touch . The Settings screen appears. 2. Touch TEAM Express settings. The TEAM Express screen appears. 3. Touch Talk Group. The Talk Group screen appears. AR 1. IN Figure 2-29 Talk Group Screen Touch a Talk Group number. Use the arrow buttons to view additional Talk Groups. 5. Touch Save. 6. Touch 7. Press the Home button. 4. EL to return to the TEANM Express screen. Disable TEAM Express Voice Client Communication To disable the PTT communication: From the Home screen, touch . The Settings screen appears. 2. Touch TEAM Express settings. The TEAM Express screen appears. 3. Touch Voice Client Status. 4. Touch Disable. 5. Touch Save. 6. Touch 7. Press the Home button. PR 1. to return to the TEANM Express screen. PPT Communication PTT communication may be established as a Group Broadcast or Private Response. Group Broadcast (One to Many) 1. Press and hold the PTT button on the Speaker Adapter or Headset for more than 300 msec. and listen for the talk tone to play. Operation 2 - 19 If a busy tone is heard, release the PTT button and wait a moment before making another attempt. Ensure that TEAM Express and the WLAN are enabled. 2. Start talking immediately after the talk tone plays. NOTE If the user holds the PTT button for more than 60 seconds, the call is dropped and then restarted preventing others from making Group Broadcast calls. The user should release the Group Broadcast button when finished talking to allow others to make calls. Release the PTT button when finished talking. AR 3. Response to a Group Broadcast To respond to a Group Broadcast: 1. Wait until an access tone is heard. 2. Press and hold the PTT button within 300 msec. and listen for the talk tone to play. If a busy tone is heard, release the PTT button and wait a moment before making another attempt. Ensure that TEAM Express and the WLAN are enabled. Start talking immediately after the talk tone plays. 4. Release the PTT button when finished talking. Private Response (One to One) IN 3. The Private Response can only be initiated once a Group Broadcast has been established. The initial Private Response is made to the last talker on the Group Broadcast. Wait until an access tone is heard. 2. Within 10 seconds, double press and hold the PTT button, and listen for the talk tone to play. EL 1. If a busy tone is heard, release the PTT button and wait a moment before making another attempt. Ensure that TEAM Express and the WLAN are enabled. Start talking immediately after the talk tone plays. PR 3. 4. Release the PTT button when finished talking. PR EL IN AR 2 - 20 SB1 User Guide AR CHAPTER 3 DATA CAPTURE IN Introduction The SB1 contains a bar code reader with aimer and illumination for reading bar code data. The reader uses digital camera technology to take a digital picture of a bar code, stores the resulting image in its memory, and executes state-of-the-art software decoding algorithms to extract the data from the image. Scanning Considerations EL Scanning consists of; aim, scan and decode. Scanning performance can be optimized by considering the range. Any scanning device decodes well over a particular working range (minimum and maximum distances from the bar code). This range varies according to bar code density and scanning device optics. PR Scanning within range brings quick and constant decodes; scanning too close or too far away prevents decodes. Move the SB1 closer and further away to find the right working range for the bar codes being scanned. The best way to specify the appropriate working range per bar code density is through a chart called a decode zone. A decode zone simply plots working range as a function of minimum element widths of bar code symbols. See the SB1 Integrator Guide for decode zone chart. NOTE Contact the Motorola Solutions Global Customer Support if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Bar Code Reading To read bar codes: 1. Ensure that the SB1 is loaded with a scanning application. 2. Aim the exit window at the bar code. SB1 User Guide Press the Scan button. Ensure the red illumination covers the entire bar code. The LED Indicator illuminates red to indicate that the illumination is on. The LED Indicator turns green and a beep sounds to indicate a successful decode. EL 3. Figure 3-1 Data Capture IN AR 3-2 • Optimal reading distance varies with bar code density. • Hold the SB1 farther away for larger symbols. • Move the SB1 closer for symbols with bars that are close together. PR NOTE Scanning procedures depend on the application. An application may use different scanning procedures from the one listed above. AR Chapter 4 Accessories IN Introduction The SB1 accessories provide a variety of product support capabilities. Table 4-1 lists the SB1 accessories. Accessory Cradles Table 4-1 SB1 Accessories Charges the battery within the SB1. EL Single Slot Charging Cradle Description Ten Slot Charge Only Cradle Charges up to ten SB1s. Charging Provides power to the Ten Slot Charge Only Cradle. Power Supply (5 VDC, 850 mA) Provides power to the Single Slot Charging Cradle. PR Power Supply (12 VDC, 4.16 A) Miscellaneous Holster Provides a clip on holder for the SB1. Armband Provides a clip on holder for the SB1. Lanyard Use to hold the SB1 around your neck. Headset Adapter Provides audio to a wired headset. Speaker Adapter Provides speaker for Push-To-Talk functionality. Earbud Headset TBS Speaker Headset TBS 4-2 SB1 User Guide Single Slot Charging Cradle CAUTION Ensure to follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. EL IN AR Use the Single Slot Charging cradle to charge the SB1 battery. To charge the SB1 battery: Figure 4-1 Single Slot USB Cradle If attached, remove the SB1 from the lanyard or holster tether. 2. Slide the SB1 into the slot with the Scan button facing up. PR 1. Accessories Scan Button Figure 4-2 Single Slot USB Cradle IN AR LED 4-3 When charging is complete remove the SB1 from the cradle. PR EL 3. The Charging screen displays and the SB1 LED Indicator indicates the SB1 battery charging status. The battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. 4-4 SB1 User Guide Ten Slot Charge Only Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. PR EL IN AR Use the Ten Slot Charge Only cradle to charge up to ten SB1s simultaneously. To charge the SB1: Figure 4-3 Ten Slot Charge Only Cradle 1. If attached, remove the SB1 from the lanyard or holster tether. 2. Slide the SB1 into the slot with the Scan button facing up. 3. Push down on the SB1 until it snaps into place. Verify that the SB1 is secure in the slot. Accessories Scan Button EL IN AR LED 4-5 Figure 4-4 Insert SB1 into Ten Slot Charge Only Cradle The Charging screen displays and the SB1 LED Indicator indicates the SB1 battery charging status. The battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. When charging is complete, remove the SB1 from the cradle. PR 4. 4-6 SB1 User Guide Audio Adapter Use the Audio Adapter to add audio functionality to the SB1. To attached the Audio Adapter to the SB1: 1. Align the Audio Adapter magnets with the adapter mounting points on the back of the SB1. Figure 4-5 Align Audio Adapter with SB1 IN AR Magnets Lower the Audio Adapter onto the SB1. The Audio Adapter snaps onto the SB1. 3. Ensure that the adapter is laying flat on the SB1. If not, remove and re-attach. PR EL 2. Figure 4-6 Audio Adapter on SB1 4. Plug a headset plug into the headset jack on the Audio Adapter. PR EL IN Figure 4-7 Connect Headset to Audio Adapter AR Accessories 4-7 4-8 SB1 User Guide Speaker Adapter Use the Speaker Adapter to add audio and push to talk functionality. To install the Speaker Adapter onto the SB1: Align the Speaker Adapter magnets with the adapter mounting points on the back of the SB1. IN Magnets AR 1. Figure 4-8 Align Speaker Adapter Lower the Speaker Adapter onto the SB1. The Speaker Adapter snaps onto the SB1. 3. Ensure that the adapter is laying flat on the SB1. If not, remove and re-attach. PR EL 2. Figure 4-9 Speaker Adapter Installed Accessories 4-9 Holster IN AR Use the holster to store the SB1 provides a holder for the SB1. The holster holds the SB1 on a belt or waist band and provides a tether to attach the SB1 to the holster. Figure 4-10 Holster Feed the loop end of the tether through one of the holes in the holster. 2. Feed the loop end of the tether through the other hole. 3. Pull the loop up so that enough of the loop is above the hole so that the clip end fits through. PR EL 1. Figure 4-11 Install SB1 onto Holster Feed the clip end of the tether through the loop end. Continue to feed the tether through the loop and then pull taught. Figure 4-12 Install SB1 onto Holster 4 - 10 SB1 User Guide AR Feed the clip end through the lanyard slot and snap together. IN Figure 4-13 Install Clip onto SB1 Place the SB1 into the holster with the Scan button facing down and the screen facing the holster. PR EL Push the SB1 into the holster until it snaps into place. Figure 4-14 Install SB1 onto Holster To remove the SB1 from the holster, pull on the top of the SB1 away from the body. Accessories 4 - 11 Armband Use the Armband to wear the SB1 on the arm. To install the armband: Feed the end of the armband through the buckle ensuring that the rubber grip side is facing inside. Rubber Grip Material AR Hook Material Buckle IN Figure 4-15 Armband Slide the armband onto the arm to a comfortable location. 2. Pull the end of the armband and fold over so that the hook material attaches to the loop material. EL 1. PR Loop Material Hook Material Figure 4-16 Install Armband 3. Insert the clip of the holster in between the two sections of the armband. Figure 4-17 Insert Holster Lift and then pull the end of the armband to tighten. PR EL 4. IN AR 4 - 12 SB1 User Guide Figure 4-18 Tighten Armband Accessories 4 - 13 Lanyard The lanyard provide a means to hold the SB1 on neck. AR Adjustment Buckle EL IN Breakaway Snap J-hook Figure 4-19 Lanyard PR Slide the lanyard strap through the Adjustment Buckle to adjust the length of the lanyard. Moving the buckle closer to the Breakaway Snap lengthens the lanyard and moving it away from the Breakaway Snap shortens the lanyard. AR 4 - 14 SB1 User Guide PR EL IN Figure 4-20 Adjust Lanyard AR Chapter 5 Maintenance & Troubleshooting IN Introduction Maintaining the SB1 This chapter includes instructions on cleaning and storing the SB1, and provides troubleshooting solutions for potential problems during SB1 operation. For trouble-free service, observe the following tips when using the SB1: EL • Do not scratch the screen of the SB1. When working with the SB1, only use finger. Never use an actual pen or pencil or other sharp object on the surface of the SB1 screen. • Although the SB1 is water and dust resistant, do not expose it to rain or moisture for an extended period of time. In general, treat the SB1 as a pocket calculator or other small electronic instrument. • The screen of the SB1 is glass. Do not to drop the SB1 or subject it to strong impact. PR • Protect the SB1 from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and keep it away from heat sources. • Do not store or use the SB1 in any location that is dusty, damp, or wet. • Use a soft lens cloth to clean the SB1. If the surface of the SB1 screen becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. See Cleaning on page 5-2. Battery Safety Guidelines WARNING! Failure to follow these guidelines may result in fire, explosion, or other hazard. • The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. • Follow battery usage, storage, and charging guidelines found in this user guide. 5-2 SB1 User Guide • Improper battery use may result in a fire, explosion, or other hazard. • Do not use a tool to remove the battery from the SB1 or battery charging accessory. • To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF and +104 ºF (0 ºC and +40 ºC) • Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Motorola Solutions Global Customer Support. • For devices that utilize a USB port as a charging source, the device shall only be connected to products AR that bear the USB-IF logo or have completed the USB-IF compliance program. • To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all batteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorola authentication hologram. • Do not disassemble or open, crush, bend or deform, puncture, or shred. • Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. IN • Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard. • Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. • Battery usage by children should be supervised. • Please follow local regulations to properly dispose of used re-chargeable batteries. EL • Do not dispose of batteries in fire. • In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact PR has been made, wash the affected area with large amounts of water and seek medical advice. • If you suspect damage to your equipment or battery, contact Motorola Solutions Global Customer Support to arrange for inspection. Cleaning CAUTION Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Motorola for more information. WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. Maintenance & Troubleshooting 5-3 Approved Cleanser Active Ingredients 100% of the active ingredients in any cleaner must consist of one or some combination of the following: isopropyl alcohol, bleach/sodium hypochlorite, hydrogen peroxide or mild dish soap. Harmful Ingredients AR The following chemicals are known to damage the plastics on the SB1 and should not come in contact with the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene; benzene; carbolic acid and TB-lysoform. Cleaning Instructions Do not apply liquid directly to the SB1. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window or other places. Allow the unit to air dry before use. IN Special Cleaning Notes EL Materials Required Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are known to be harmful to the housing of the SB1. The SB1 should not be handled while wearing vinyl gloves containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If products containing any of the harmful ingredients listed above are used prior to handling the SB1, such as hand sanitizer that contain ethanolamine, hands must be completely dry before handling the SB1 to prevent damage to the plastics. • Alcohol wipes • Lens tissue • Cotton tipped applicators • Isopropyl alcohol PR • Can of compressed air with a tube. Cleaning the SB1 Housing Using the alcohol wipes, wipe the housing including keys and in-between keys. Display The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent streaking. Reader Exit Window Wipe the exit window periodically with a lens tissue or other material suitable for cleaning optical material such as eyeglasses. 5-4 SB1 User Guide Connector Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 2. Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom of the SB1. Do not leave any cotton residue on the connector. 3. Repeat at least three times. 4. Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area. 5. Use a dry cotton tipped applicator and repeat steps 4 through 6. CAUTION AR 1. Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface. 7. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors To clean the connectors on a cradle: IN 6. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the connector. 4. All sides of the connector should also be rubbed with the cotton tipped applicator. EL 1. CAUTION Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the surface. PR 5. Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face. 6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found. 7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove. 8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry before applying power to cradle. If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry humidity requires less drying time. Cleaning Frequency The cleaning frequency is up to the customer’s discretion due to the varied environments in which the mobile devices are used. They may be cleaned as frequently as required. However when used in dirty environments it may be advisable to periodically clean the scanner exit window to ensure optimum scanning performance. Maintenance & Troubleshooting 5-5 Troubleshooting SB1 Table 5-1 Troubleshooting the SB1 Battery did not charge. Solution Battery not charged. Charge the SB1. System crash. Perform a reset. If the SB1 still does not turn on, contact system administrator. For more information see, Resetting the SB1 on page 1-5. Battery failed. Perform a reset. For more information see, Resetting the SB1 on page 1-5. SB1 removed from power source while battery was charging. Connect power source and begin charging. The battery requires up to four hours to recharge fully. AR SB1 does not turn on. Cause IN Problem Battery does not charge if ambient temperature is below 0 °C (32 °F) or above 40 °C (104 °F). Volume setting is low or turned off. Increase the volume. See Adjusting the Volume on page 2-13 for more information. Audio Adapter not installed properly. Remove and replace Audio Adapter. Headset not plugged into Adapter correctly. Remove headset plug and insert into Audio Adapter audio jack. Speaker Adapter not installed properly. Remove and replace Speaker Adapter. Tapping the screen buttons or icons does not activate the corresponding feature. Touch screen not calibrated correctly. Re-calibrate the screen. See Screen Calibration on page 2-13. Battery depleted. Recharge the battery. The SB1 does not accept scan input. Scanning application is not loaded. Verify that the SB1 is loaded with a scanning application. See the system administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between SB1 and bar code is incorrect. Ensure the SB1 is within proper scanning range. SB1 is not programmed for the bar code type. See system administrator. Battery is low. Check the battery level. When the battery is low, the SB1 automatically goes into suspend mode. PR EL SB1 does not emit sound. Extreme battery temperature. 5-6 SB1 User Guide Single Slot Charging Cradle Table 5-2 Troubleshooting the Single Slot Charging Cradle Problem Solution Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. The SB1 is not fully seated in the cradle. Remove and re-insert the SB1 into the cradle, ensuring it is correctly seated. SB1 was removed from cradle too soon. AR SB1 battery is not charging. Cause If the SB1 battery is fully depleted, it can take up to four hours to fully recharge a battery. Verify that other SB1 devices charge properly. If so, contact system administrator. Battery is faulty. Ten Slot Charge Only Cradle IN Table 5-3 Troubleshooting the Four Slot Charge Only Cradle Cause Solution SB1 battery is not charging. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Problem Remove and re-insert the SB1 into the cradle, ensuring it is correctly seated. SB1 was removed from cradle too soon. If the SB1 battery is fully depleted, it can take up to four hours to fully recharge a battery. Battery is faulty. Verify that other SB1 devices charge properly. If so, contact system administrator. EL The SB1 is not fully seated in the cradle. PR Audio Adapter Table 5-4 Troubleshooting the Audio Adapter Problem Audio cannot be heard through headset. Cause Solution Audio Adapter not connected properly. Remove Audio Adapter and reinstall. Headset is not connected properly. Remove headset from Audio Adapter and reinstall. Volume is too low. Increase audio volume, Maintenance & Troubleshooting Speaker Adapter Table 5-5 Troubleshooting the Speaker Adapter Problem Solution Speaker Adapter not connected properly. Remove Speaker Adapter and reinstall. Volume is too low. Increase audio volume, PR EL IN AR Audio cannot be heard through Speaker Adapter. Cause 5-7 SB1 User Guide PR EL IN AR 5-8 AR Appendix A Specifications SB1 Technical Specifications IN This appendix provides specifications for the SB1 and accessories. Table A-1 summarizes the SB1 technical specifications and intended operating environments. Table A-1 SB1 Technical Specifications Item EL Physical Characteristics Description Dimensions 92 mm L x 81 mm W x 14 mm D (3.62 in. L x 3.19 in. W x 0.55 in. D) Weight 110 g (3.8 oz.) PR Display 3.0” E Ink Pearl, 4-bit grayscale (16 shades). QVGA 320 x 240 resolution. Touch Panel Full screen resistive touch; finger operation (no stylus) Battery Rechargeable Lithium-ion 910 mAh Network Connections Wireless Local Area Network (WLAN) Notification Audio: beeper; Visual: multi-color LED Audio Integrated microphone; accessories include optional Speaker Adapter with push-to-talk and Audio Adapter. Performance Characteristics CPU IMX35 (532 MHz) Applications Supports thin client applications and HTML 5 with RhoElements extensions. Memory 128 MB RAM/128 MB Flash A-2 SB1 User Guide Table A-1 SB1 Technical Specifications (Continued) Item Description User Environment 0 °C to 40°C (32 °F to 104 °F) Storage Temperature -40 °C to 70 °C (-40 °C to 158 °F) Charging Temperature 0 °C to 40 °C (32 °F to 104 °F) Humidity 5 to 95% non-condensing Drop Specification Multiple 1.22 m (4 ft) drop to tile over concrete per MIL STD 810G specifications Electrostatic Discharge (ESD) +/-15 kV air discharge +/- 8 kV direct discharge Sealing IP54 Wireless LAN Data and Voice Communications AR Operating Temperature Wi-Fi IEEE® 802.11b/g/n Data Rates Supported 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps and MCS0-7 Operating Channels Channel 1-13 (2412-2472 MHz), Channel 14 (2484 MHz) Japan only; actual operating channels/frequencies depend on regulatory rules and certification agency IN WLAN radio Security Modes: Legacy, WPA and WPA2 Encryption: WEP (40 or 128 bit), TKIP and AES Authentication: TLS, TTLS (MS-CHAP), TTLS (MS-CHAP v2), TTLS (CHAP), TTLS (MD5), TTLS (PAP), PEAP-TLS, PEAP (MS-CHAP v2), PEAP (EAP-GTC), EAP-FAST-TLS, EAP-FAST (MS-CHAP v2), EAP-FAST (EAP-GTC) and LEAP EL Security PR Spreading Technique Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) Data Capture Specifications Options Omni-directional bar code reader with integrated aiming and illumination. AR GLOSSARY IN Numeric 802.11bgn. A radio protocol that may be used by the SB1 radio. PR EL Access Point. Access Point (AP) refers to Motorola’s Ethernet Access Point. It is a piece of communications equipment that manages communications between the host computer system and one or more wireless terminals. An AP connects to a wired Ethernet LAN and acts as a bridge between the Ethernet wired network and IEEE 802.11 interoperable radio-equipped mobile units, such as a SB1. The AP allows a mobile user to roam freely through a facility while maintaining a seamless connection to the wired network. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of data. The pattern of 0 and 1 values within the byte determines its meaning. Bits per Second (bps). Bits transmitted or received. Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in memory is used to store one ASCII character. boot or boot-up. The process a device goes through when it starts. During boot-up, the device can run self-diagnostic tests and configure hardware and software. Glossary - 2 SB1 User Guide Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use. AR Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code scanned. IN ESD. Electro-Static Discharge PR EL Flash Memory. Flash memory is responsible for storing the system firmware and is non-volatile. If the system power is interrupted the data is not be lost. Hz. Hertz; A unit of frequency equal to one cycle per second. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of the protocol, which contains a network address and is used to route a message to a different network or subnetwork. IP accepts “packets” from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a “datagram” to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum transmission unit (MTU) of the network. Glossary - 3 IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written as four sets of numbers separated by periods; for example, 204.171.64.2. AR LAN. Local area network. A radio network that supports data communication within a local area, such as within a warehouse of building. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's particular chemical composition. IN RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read. EL Reset. A warm boot restarts the SB1 by closing all running programs. All data that is not saved to flash memory is lost. Resolution. The narrowest element dimension which is distinguished by a particular reading device or printed with a particular device or method. RF. Radio Frequency. PR Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically used to extend the range of cabling and to organize the topology of a network into subnets. See Subnet. SB1. In this text, SB1 refers to the Motorola smart badge. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology. Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Scanning Mode. The bar code reader is energized, programmed and ready to read a bar code. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code. Glossary - 4 SB1 User Guide Subnet. A subset of nodes on a network that are serviced by the same router. See Router. Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. AR Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN, Code 39, PDF417, etc.). IN PR EL A display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix documentation updates . . . . . . . . . . . . . . . . . . . . . . . . xi EL IN accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 single slot charging cradle . . . . . . . . . . . . . . . . . 4-2 battery charging . . . . . . . . . . . . . . . . . . . . . . 4-2 ten slot charge only cradle . . . . . . . . . . . . . . . . . 4-4 ten slot cradles battery charging . . . . . . . . . . . . . . . . . . . . . . 4-4 adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 audio volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 AR INDEX PR bar code reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 battery charging temperature range . . . . . . . . . . . . . . . . . . . . . . . 1-3 ten slot charge only cradle . . . . . . . . . . . . . . . . . 4-4 beeper volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 bullets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x charging, temperature range . . . . . . . . . . . . . . . . . . . 1-3 cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix conventions notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x cradles single slot charging cradle battery charging . . . . . . . . . . . . . . . . . . . . . . 4-2 ten slot charge only cradle . . . . . . . . . . . . . . . . . 4-4 ten slot cradles battery charging . . . . . . . . . . . . . . . . . . . . . . 4-4 data capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix information, service . . . . . . . . . . . . . . . . . . . . . . . . . . . xi main battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 resetting the SB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 scan button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 scanning considerations . . . . . . . . . . . . . . . . . . . . . . 3-1 single slot charging cradle . . . . . . . . . . . . . . . . . 4-1, 4-2 Index - 2 SB1 User Guide battery charging . . . . . . . . . . . . . . . . . . . . . . . . . starting the SB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 1-3 1-3 5-1 technical specifications . . . . . . . . . . . . . . . . . . . . . . . A-1 temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 ten slot charge only cradle . . . . . . . . . . . . . . . . . . . . . 4-4 ten slot cradles battery charging . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 SB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 single slot charging cradle . . . . . . . . . . . . . . . . . 5-6 ten slot charge only cradle . . . . . . . . . . . . . . . . . 5-7 IN unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 updates, documentation . . . . . . . . . . . . . . . . . . . . . . . .xi AR PR EL volume audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 PR EL AR IN AR IN EL PR Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Solutions, Inc. All Rights Reserved. 72E-164711-01 Revision 082312 - August 2012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Author : Motorola Solutions, Inc. Create Date : 2012:08:23 17:07:20Z Modify Date : 2012:08:23 17:50:38-04:00 Has XFA : No Language : en Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 10.1.4 (Windows) Creator Tool : FrameMaker 10.0.2 Metadata Date : 2012:08:23 17:50:38-04:00 Format : application/pdf Title : SB1 User Guide (P/N 72E-164711-01 Rev. 082312) Creator : Motorola Solutions, Inc. Copyright : 2012 Job Ref : EMb MCD Templates Document ID : uuid:2ff1eb74-077e-46da-9eb5-deaafbbb51f0 Instance ID : uuid:28508319-49a1-4a3f-aa22-cb693df419c2 Page Mode : UseOutlines Page Count : 74 Signing Date : 2012:08:23 17:50:37-04:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, ExportEXIF Metadata provided by EXIF.tools