Zebra Technologies TC55AH TOUCH COMPUTER User Manual QSG
Zebra Technologies Corporation TOUCH COMPUTER QSG
Contents
- 1. User Manual QSG
- 2. User Manual RG
- 3. USERS MANUAL QSG
- 4. USERS MANUAL RG
User Manual QSG
TC55 QUICK START GUIDE Features Receiver LED Light/Proximity Sensor Touch Screen Programmable Button Volume Control Programmable Button Microphone Charging Contacts Speaker Battery Cover NFC Antenna Camera Battery Cover Notch Exit Window (Optional) USB Connector Microphone Headset Jack Unpacking The following items are in the box: • • • • • TC55 Lithium-ion battery (2,940 or 4,410 mAh) Charging Cable Quick Start Guide Regulatory Guide. Power Button Flash Installing the SIM Card NOTE The TC55 accepts full size SIM cards. If using micro or nano SIM cards, a third-party adapter is required. CAUTION For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded. 1. 2. 3. Slide the SIM card holder toward the bottom of the TC55 to unlock. Lift the SIM door. Insert the SIM card with the cut edge and the contacts facing up. 4. 5. Close the SIM card holder. Slide the SIM card holder toward the top of the TC55 to lock into place. Installing an Optional microSD Card NOTE Supports up to 64 GB cards. CAUTION For proper electrostatic discharge (ESD) precautions to avoid damaging the SD card. Proper ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded. 1. 2. Slide the microSD card door toward the top of the TC55 to unlock. Lift the SD card door. Card Notch 3. 4. 5. 6. Align the microSD card with the card holder. Ensure that the contacts on the card are facing down and toward the card holder. Note the position of the card notch. Insert the microSD card into the card holder. Close the SD card door. Slide the SD card door toward the bottom of the TC55 to lock into place. Installing the Battery 1. 2. Align the three tabs on the bottom of the battery with the three slots in the battery compartment. Press the battery down and then rotate until it locks into place. 2,940 mAh 3. 4. 4,410 mAh Align the battery door with the back of the device and press the battery door down until it snaps into place. Ensure that the battery door is seated properly and that no gaps are present. Charge the TC55 NOTE Do not charge the TC55 from a USB connector on a host computer. See TC55 User Guide for more information. 1. 2. 3. Connect the Charge Cable Cup to the bottom the TC55. Connect the USB connector to the power supply port. Plug the power supply into an AC outlet. 4. The TC55 starts to charge automatically. The 2,940 mAh battery charges in approximately three hours and the 4,410 mAh battery charges in approximately 4.5 hours. LED Description Slow Flashing Green TC55 is charging. Solid Green TC55 is fully charged. Fast Flashing Red Charging error. Off Not charging. Turning On the TC55 Press the Power button for at least one second to turn on the TC55. Replacing the 2,940 mAh Battery To replace the 2,940 mAh battery: 1. 2. 3. 4. Press the Power button until the menu displays. Touch Power off. Touch OK. Place thumbnail at battery cover notch and lift the battery cover. 5. Pull the battery tab down and then out. 6. 7. Remove the battery out of the battery compartment. Align the three tabs on the bottom of the replacement battery with the three slots in the battery compartment. Press the battery down and rotate until it locks into place. 8. 9. Align the battery door with the back of the device and press the battery door down until it snaps into place. 10. Ensure that the battery door is seated properly and that no gaps are present. 11. Press the Power button to turn on the TC55. Replacing the 4,410 mAh Battery To replace the 4,410 mAh battery: 1. 2. 3. 4. Press the Power button until the menu displays. Touch Power off. Touch OK. Place thumbnail at battery cover notch and lift the battery cover. 5. With two fingers, press the battery down. 6. 7. Rotate the battery out of the compartment. Align the three tabs on the bottom of the replacement battery with the three slots in the battery compartment. Press the battery down and rotate until it locks into place. 8. 9. Align the battery door with the back of the device and press the battery door down until it snaps into place. 10. Ensure that the battery door is seated properly and that no gaps are present. 11. Press the Power button to turn on the TC55. Data Capture To capture bar code data using the linear imager (on optional configurations): 1. 2. Open an application and ensure that a text field is in-focus. Press and hold the programmable button. The LED lights red to indicate that data capture is in process. 3. Place the red aiming pattern across the bar code. The LED lights green and a beep sounds, by default, to indicate the bar code was decoded successfully. The captured data appears in the text field. Programmable Button 4. To capture bar code data using the camera: 1. 2. Open an application and ensure that a text field is in-focus. Press and hold the programmable button. A preview window appears and the LED lights red to indicate that data capture is in process. Programmable Button 3. 4. 5. Move the TC55 until the bar code is centered under the red target. The LED lights green and a beep sounds, by default, to indicate the bar code was decoded successfully. The captured data appears in the text field. Get More Information For more information refer to the TC55 User Guide on the TC55. Touch User Guide to open the guide. > TC55 Also go to http://supportcentral.motorola.com to view the TC55 User Guide and TC55 Integrator Guide. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products. Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All Rights Reserved. MN000014A01 Revision A - September 2013
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : Motorola Solutions, Inc. Create Date : 2007:06:12 17:36:33Z Modify Date : 2013:08:16 14:12:42+08:00 Language : en XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : FrameMaker 10.0.2 Metadata Date : 2013:08:16 14:12:42+08:00 Format : application/pdf Title : TC55 Quick Reference Guide [English] (P/N MN000014A01 Rev. A) Creator : Motorola Solutions, Inc. Document ID : uuid:fb89bbc9-3b94-406a-830b-e67b57e2051f Instance ID : uuid:160dffca-a4a3-45a2-96be-3b865c817649 Page Mode : UseNone Page Count : 12EXIF Metadata provided by EXIF.tools