Zebra Technologies TC700J Touch Computer User Manual TC70x Touch Computer Regulatory Guide en
Zebra Technologies Corporation Touch Computer TC70x Touch Computer Regulatory Guide en
User Manual
![](/img.php?id=3092470&img=bg1.png)
Touch Computer
Zebra reserves the right to make changes to any product to
improve reliability, function, or design. Zebra does not assume any
product liability arising out of, or in connection with, the application
or use of any product, circuit, or application described herein. No
license is granted, either expressly or by implication, estoppel, or
otherwise under any patent right or patent, covering or relating to
any combination, system, apparatus, machine, material, method,
or process in which Zebra products might be used. An implied
license exists only for equipment, circuits, and subsystems
contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go
to: http://www.zebra.com/warranty.
TC70x
Regulatory Guide
MN-002884-01 Revision A — August 2016
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH
Corp., registered in many jurisdictions worldwide. All other
trademarks are the property of their respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of Zebra
Technologies Corporation. All rights reserved.
Product Information
For information on using the TC70x, refer to the TC70x User
Guide available at: http://www.zebra.com/support.
Regulatory Information
This device is approved under Zebra Technologies
Corporation.
This guide applies to Model Number TC700J.
All Zebra devices are designed to be compliant with the rules
and regulations in the locations they are sold and will be
labeled as required.
Local language translations are available at the following
website: www.zebra.com/support.
Any changes or modifications to Zebra equipment not
expressly approved by Zebra could void the user's authority
to operate the equipment.
For use only with Zebra approved and UL Listed mobile
computers, Zebra approved, and UL Listed/Recognized
battery packs.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the
performance or reliability of the Global Positioning System
(GPS) hardware, operating software, or other aspects of this
product. UL has only tested for fire, shock, or casualties as
outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL60950-1. UL Certification does not
cover the performance or reliability of the GPS hardware and
GPS operating software. UL makes no representations,
warranties, or certifications whatsoever regarding the
performance or reliability of any GPS related functions of this
product.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more
information or to view the End Product Listing, please visit
https://www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country
Approvals
Regulatory markings subject to certification are applied to the
device signifying the radio(s) is/are approved for use in the
following countries and continents: United States, Canada,
Japan, China, South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for
details of other country markings. This is available at: http://
www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Cyprus, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland, and the United
Kingdom.
Country Roaming
This device incorporates the International Roaming feature
(IEEE802.11d), which will ensure the product operates on the
correct channels for the particular country of use.
Wi-Fi Direct Operation (2.4 GHz Band)
Wi-Fi Direct operation is limited to Channels 1-11 (2412-2462
MHz).
Frequency of Operation - FCC and IC
5 GHz Only
Industry Canada Statement:
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by
firmware.
Health and Safety
Recommendations
Ergonomic Recommendations
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (including
safety systems). Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer about any equipment that has been
added to your vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Position the device within easy reach. Be able to access the
device without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle
horn to sound or lights to flash on receipt of a call on public
roads is not permitted.
For Safe installation
•
Do not put your phone in a location that obstructs the
driver's vision or interferes with the operation of the
Vehicle.
•
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting
down a 'to do' list or flipping through your address book takes
attention away from your primary responsibility; driving
safely.
When driving a car, driving is your first responsibility - Give
your full attention to driving. Check the laws and regulations
on the use of wireless devices in the areas where you drive.
Always obey them.
When using a wireless device behind the wheel of a car,
practice good common sense and remember the following
tips:
1. Get to know your wireless device and any features such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off the
road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice, and
even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need
to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
6. Use your wireless phone to call for help. Dial the
Emergency services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number in the case of
fire, traffic accident, or medical emergencies. Remember,
it is a free call on your wireless phone! The call can be
made regardless of any security codes and depending on
a network; with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress, or other
serious emergency where lives are in danger, call the
Emergency Services (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number as you would
want others to do for you.
8. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
wireless number.
“The wireless industry reminds you to use your device /
phone safely when driving”.
Warnings for Use of Wireless Devices
Potentially Hazardous Atmospheres -
Vehicles Use
You are reminded of the need to observe restrictions on the
use of radio devices in fuel depots, chemical plants, etc. and
areas where the air contains chemicals or particles such as
grain, dust, or metal powders and any other area where you
would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed
to do so by airport or airline staff. If your device offers a 'flight
mode' or similar feature, consult airline staff as to its use in
flight.
Wireless devices transmit radio frequency energy and may
affect medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics, or healthcare
facilities. These requests are designed to prevent possible
interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of
15cm (6 inches) be maintained between a handheld wireless
device and a pacemaker to avoid potential interference with
the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
•
Should ALWAYS keep the device more than 15cm
(6 inches) from their pacemaker when turned ON.
•
Should not carry the device in a breast pocket.
•
Should use the ear furthest from the pacemaker to
minimize the potential for interference.
•
If you have any reason to suspect that interference is
taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the
medical device to determine if the operation of your wireless
product may interfere with the medical device.
RF Exposure Guidelines
•
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the
instructions supplied.
•
International
The device complies with internationally recognized
standards covering human exposure to electromagnetic
fields from radio devices. For information on 'International'
human exposure to electromagnetic fields, refer to the
Zebra Declaration of Conformity (DoC) at http://
www.zebra.com/doc.
For further information on the safety of RF energy from
wireless devices, see https://www.zebra.com/us/en/about-
zebra/company-information/corporate-responsibility.html
located under Corporate Responsibility.
•
Europe
Handheld Devices
This device was tested for typical body worn operation.
Use only Zebra tested and approved belt clips,
holsters, and similar accessories to ensure EU
Compliance.
•
US and Canada
Phones (placed to ear or used with headset)
Use only Zebra tested and approved belt clips,
holsters, and similar accessories to ensure FCC
Compliance. The use of third-party belt clips, holsters,
and similar accessories may not comply with FCC RF
exposure compliance requirements and should be
avoided. The FCC has granted an Equipment
Authorization for these model phones with all reported
SAR levels evaluated as in compliance with the FCC
RF emission guidelines. SAR information on these
model phones is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/
oet/ea/fccid.
Co-located statement
To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any
other transmitter/antenna except those already
approved in this filling.
Handheld Devices
This device was tested for typical body worn operation.
Use only Zebra tested and approved belt-clips,
holsters, and similar accessories to ensure FCC
Compliance. The use of third-party belt clips, holsters,
and similar accessories may not comply with FCC RF
exposure compliance requirements, and should be
avoided.
To satisfy US and Canadian RF exposure
requirements, a transmitting device must operate with
a minimum separation distance of 1.0 cm or more from
a person's body.
Pour satisfaire aux exigences Américaines et
Canadiennes d'exposition aux radio fréquences, un
dispositif de transmission doit fonctionner avec une
distance de séparation minimale de 1.0 cm ou plus de
corps d'une personne.
Laser Devices
Class 2 laser scanners use a low power, visible light
diode. As with any very bright light source such as the sun,
the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be
harmful.
The following statement is required to comply with US and
international regulations.
Scanner Labeling
Labels Read:
1. LASER LIGHT: DO NOT STARE INTO BEAM. CLASS
2 LASER PRODUCT.
2. CAUTION- CLASS 2 LASER LIGHT WHEN OPEN.
DO NOT STARE INTO THE BEAM.
3. COMPLIES WITH 21CFR1040.10 AND 1040.11
EXCEPT FOR DEVIATIONS PURSUANT TO LASER
NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN
60825-1:2014
LED Devices
Classified as 'EXEMPT RISK GROUP' according to IEC
62471:2006 and EN 62471:2008.
Pulse duration: 1.7 ms.
Power Supply
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN
60950-1, LPS) power supply with electrical ratings: Output
5.4 VDC, min 3.0 A, with a maximum ambient temperature of
at least 50 °C. Use of alternative power supply will invalidate
any approvals given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental
Protection Administration)
requires dry battery
producing or importing
firms in accordance with
Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on
the batteries used in sales, giveaway or promotion. Contact a
qualified Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have
battery charging capability are approved for use with the
following battery models:
•
Part Number 82-171249-02 (3.7 VDC, 4500 mAh) for WW.
•
Part Number 82-171249-03 (3.7 VDC, 4500 mAh) for
Brazil Only.
Zebra rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can
operate or be stored before needing replacement. Many
factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may occur.
Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity,
rusting of metallic parts and electrolyte leakage. When
storing batteries for one year or longer, the charge level
should be verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or
included as part of the mobile computer or bar code scanner.
For more information on Zebra batteries, please visit: http://
www.zebra.com/batterybasics.
Battery Safety Guidelines
The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular
care should be taken where the device is charged in a non
commercial environment.
•
Follow battery usage, storage, and charging guidelines
found in the user's guide.
•
Improper battery use may result in a fire, explosion, or
other hazard.
•
To charge the mobile device battery, the battery and
charger temperatures must be between +32°F and
+104°F (0°C and +40°C)
•
Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger,
contact Zebra support.
•
For devices that utilize a USB port as a charging source,
the device shall only be connected to products that bear
the USB-IF logo or have completed the USB-IF
compliance program.
•
Do not disassemble or open, crush, bend or deform,
puncture, or shred.
•
Severe impact from dropping any battery-operated device
on a hard surface could cause the battery to overheat.
•
Do not short circuit a battery or allow metallic or
conductive objects to contact the battery terminals.
•
Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, or expose to fire, explosion, or other hazard.
•
Do not leave or store the equipment in or near areas that
might get very hot, such as in a parked vehicle or near a
radiator or other heat source. Do not place battery into a
microwave oven or dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose of
used re-chargeable batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has been
swallowed.
•
In the event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. If contact has been
made, wash the affected area with large amounts of water
and seek medical advice.
•
If you suspect damage to your equipment or battery,
contact Zebra support to arrange for inspection.
Radio Frequency Interference
Requirements-FCC
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and
receiver
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician
for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Interference Requirements-
Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
This device complies with Industry Canada's licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This
device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radio électrique subi
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the
following restrictions:
•
Restricted Band 5.60 – 5.65 GHz
Pour les équipements RLAN:
L'utilisation de la bande RLAN 5 GHz au Canada présente
les limitations suivantes :
•
Bande restreinte 5.60 - 5.65 GHz
Label Marking: The Term “IC:” before the radio certification
only signifies that Industry Canada technical specifications
were met.
Etiquette de marquage: Le terme "IC" avant la certification
radio signifie que le produit est compatible avec le
spécification Industrie Canada.
Marking and European Economic
Area (EEA)
The use of RLAN’s, for use through the EEA, have the
following restrictions:
•
Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
•
5150 - 5350 MHz is restricted to indoor use only.
Bluetooth® Wireless Technology for use through the EEA
has the following restrictions:
CAUTION Only use Zebra approved and UL Listed
accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.
Declared maximum operating temperature: 50°C.
CAUTION Operation of the device without
regulatory approval is illegal.
CAUTION The device for the band 5150-5250
MHz is only for indoor usage to reduce potential
for harmful interference to co-Channel mobile
satellite systems. High power radars are
allocated as primary users (meaning they have
priority) of 5250-5350 MHz and 5650-5850 MHz
and these radars could cause interference and/
or damage to LE-LAN devices.
AVERTISSEMENT Le dispositive fonctionnant
dans la bande 5150-5250 MHz est réservé
uniquement pour une utilisation à l'intérieur afin
de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les
mêmes canaux. Les utilisateurs de radars de
haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250-5350 MHz et 5650-5850 MHz et que
ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN-EL.
CAUTION In order to avoid or minimize the
potential risk of ergonomic injury, follow the
recommendations below. Consult with your local
Health and Safety Manager to ensure that you
are adhering to your company's safety programs
to prevent employee injury.
IMPORTANT Before installing or using,
check state and local laws regarding
windshield mounting and use of equipment.
CAUTION Please observe all warning notices
with regard to the usage of wireless devices.
Safety in Hospitals
Safety Information
CAUTION Use of controls, adjustments or
performance of procedures other than those
specified herein may result in hazardous laser
light exposure.
CAUTION Risk of explosion if battery is replaced by
an incorrect type. Dispose of batteries according to
instructions.
COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT
FOR DEVIATIONS PURSUANT TO LASER NOTICE
NO. 50, DATED JUNE 24, 2007 AND IEC/EN
60825-1:2014
CAUTION- CLASS 2 LASER LIGHT WHEN OPEN.
DO NOT STARE INTO THE BEAM.
ATTENTION- LUMIÉRE LASER DE CLASSE 2 EN
CAS D'OUVERTURE.
NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT- LASERLICHT KLASSE 2,
WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.
3
2
1
![](/img.php?id=3092470&img=bg2.png)
•
Maximum radiated transmit power of 100mW EIRP in the
frequency range 2.400 - 2.4835 GHz
Statement of Compliance
Zebra hereby declares that this radio equipment is in
compliance with Directive 2011/65/EU and 1999/5/EC or
2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th
June 2017). The full text of the EU Declaration of Conformity
is available at the following internet address: http://
www.zebra.com/doc.
Other Countries
Australia
Use of 5GHz RLAN’s in Australia is restricted in the following
band 5.50 – 5.65GHz.
Brazil (UNWANTED EMISSIONS - ALL
PRODUCTS)
Declarações Regulamentares para TC700J - Brazil
Nota: A marca de certificação se aplica ao Transceptor,
modelo TC700J. Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo,
e não pode causar interferência a sistemas operando em
caráter primário.
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br
Este produto está homologado pela Anatel, de acordo com
os procedimentos regulamentados pela Resolução n°242/
2000 e atende aos requisitos técnicos aplicados, incluindo os
limites de exposição da Taxa de Absorção Específica
referente a campos elétricos, magnéticos e eletromagnéticos
de radiofrequência, de acordo com as Resoluções n° 303/
2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de
exposição à radiofrequência quando posicionado pelo menos
X centímetros de distância do corpo. Para maiores
informações, consulte o site da Anatel.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
Conforme a Resolución 755 parte j.1), se ajustará el
dispositivo a operar en interiores en las siguientes bandas
con una potencia máxima radiada no superior a 150mW:
•
2.400 hasta 2.483,5 MHz
•
5.150 hasta 5.250MHz
•
5.250 hasta 5.350MHz
•
5.725 hasta 5.850MHz
Además, de acuerdo con Resolución 755, para la banda
5150-5250MHz la operación del equipo estará restringida al
interior de inmuebles y la densidad de potencia radiada
máxima no supera 7,5mW/MHz en cualquier banda de 1MHz
y 0.1875mW/25kHz en cualquier banda de 25kHz.
China
抩扖幎桽ⅴₚ几⧏♾ₚ戌㇢⦿幼岏㞾㖐䤓ℶ❐広㢝
ZZZ]HEUDFRPVXSSRUW
撪䓝㰈⬱ℐ嬎䣢宕 :
㆙࿌㸸実⊧㉮塭炻䞕嶗炻㑆↣炻㋌⌳ㆾ侭㈽ℍ䀓ᷕ⍲㯜
ᷕ烊
ὀព㸸ዴᯝ䓝㰈塓ᶵ㬋䠖✳⎟㚧㌊炻ㆾ↢䍘溻偨炻Ể⬀⛐
䆮䁠⍲℞Ṿ⌙昑
庆㖘広㢝⮓函∎䞷扖䤓䟄㻯
⚗㫋幐᧶
Eurasian Customs Union
̬͉͇͎͗͏͐͑͘͏̸̹͇͓͕͍͔͔͕͎͐͌͐ͥ͢
̫͇͔͔͖͕͚͙͕͕͙͉͙͙͉͚͙͙͈͕͉͇͔͐͗͋͑͌͌͗͌͘͘͢͏͓͎͔͇͇ͦ͑
($&.
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz
is for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 – 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y (2) este equipo o dispositivo
debe aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
Taiwan
咉䋲
⇝┮䘖榊㽱懊⺓㊶榊㳮丰䚕戵㽤
䶻◐ℛ㬬
倢⨚㆞崜巘⚗㫋⃚⇝┮䘖⺓櫊榊㳮᧨槭倢峀♾᧨⏻⚇ᇬ⟕壮㒥
∎䞷劔⧖ₜ㈦㝔呹帙㦃櫊䘖ᇬ┯⮶┮䘖㒥帙㦃☮岼岗⃚䔈㊶♙
┮厌ᇭ
䶻◐⥪㬬
⇝┮䘖⺓櫊榊㳮⃚∎䞷ₜ㈦㈀檎歪咹⸘⏷♙㞍⚗㽤抩≰᧷倢
䤋䚍㦘㞍䚍廰㣑᧨㑘䵚☂⋫䞷᧨₵㟈⠓咂䎰㞍㣑㡈㈦儋儛
∎䞷ᇭ
ⓜ檔⚗㽤抩≰᧨㖖∬榊≰尞⸩⇫㯼⃚䎰偩榊抩≰ᇭ
⇝┮䘖⺓櫊榊㳮檗㉜♦⚗㽤抩≰㒥ぴ㯼ᇬ䱠⸇♙携䣑䞷榊㽱懊
⺓㊶榊㳮岼⌨⃚㞍ᇭ
⦷ 䱼忺櫊ヅ⏶㝜⇫⃚䎰偩彖岙⍂懇岼⌨᧨棟㡋⸳⏶
∎䞷ᇭ
Turkey
%XFLKD]7¾UN©HNDUDNWHUOHULQWDPDPóQóLKWLYDHGHQ(76,
76 9 YH\D VRQUDNL V¾U¾P¾Q NRGX YH (76,
769YH\DVRQUDNLV¾U¾P¾QNRGXWHNQLN
¸]HOOLNOHULQHX\JXQGXU
Ukraine
Дане обладнання відповідає вимогам технічного
регламенту № 1057, 2008 на обмеження щодо
використання деяких небезпечних речовин в електричних
та електронних пристроях.
Thailand
ࡳ࠻࡚ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴࡧࡤࡒ࠸࡚ࡊࡿࡐࡼ
ࡘ࠻࡞ࡩࡘࡡࡤࡋ࠻ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
Waste Electrical and
Electronic Equipment
(WEEE)
English: For EU Customers: All products at the end of their life must
be returned to Zebra for recycling. For information on how to return
product, please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits en fin de
cycle de vie doivent être retournés à Zebra pour recyclage. Pour de
plus amples informations sur le retour de produits, consultez : http://
www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Zebra al final de su ciclo de vida para que sean
reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот
всички продукти трябва да се връщат на Zebra за рециклиране.
За информация относно връщането на продукти, моля отидете на
адрес: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine
del rispettivo ciclo di vita devono essere restituiti a Zebra al fine di
consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com/
weee.
Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Zebra para reciclagem. Para obter
informações sobre como devolver o produto, visite: http://
www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Zebra te worden teruggezonden voor
recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z
eksploatacji należy zwrócić do firmy Zebra w celu ich utylizacji.
Informacje na temat zwrotu produktów znajdują się na stronie
internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení
jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o
zpùsobu vrácení produktu najdete na webové stránce: http://
www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Zebra för återvinning. Information om
hur du returnerar produkten finns på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til
recirkulering, når de er udtjent. Læs oplysningerne om returnering af
produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-
ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ.
Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok
żur: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei
lor de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi: http://
www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske
dobe vrniti podjetju Zebra za reciklažo. Za informacije o vračilu izdelka
obiščite: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť
po uplynutí doby ich životnosti vrátené spoločnosti Zebra na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos
laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau
informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām
ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/
weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://
www.zebra.com/weee.
Microsoft End-user License
Agreement
These license terms are an agreement between you and Zebra
Technologies Corporation (“Company”). Please read them. They apply
to the software included on this device. The software also includes any
separate media on which you received the software.
The software on this device includes software licensed by Company
from Microsoft Corporation or its affiliate.
The terms also apply to any:
• updates,
• supplements,
• Internet-based services, and
• support services
for this software, unless other terms accompany those items. If so,
those terms apply.
As described below, using some features also operates as your
consent to the transmission of certain standard computer information
for Internet-based services.
By using the software, including use on this device, you accept these
terms. If you do not accept them, do not use the device or software.
Instead, contact Company to determine its return policy for a refund or
credit.
WARNING: If the software contains voice operated technologies, then
operating this software requires user attention. Diverting attention
away from the road while driving can possibly cause an accident or
other serious consequence. Even occasional, short diversions of
attention can be dangerous if your attention is diverted away from your
driving task at a critical time. Company and Microsoft make no
representations, warranties or other determinations that ANY use of
this software is legal, safe, or in any manner recommended or
intended while driving or otherwise operating a motor vehicle.
If you comply with these license terms, you have the rights below.
1. USE RIGHTS.
You may use the software on the device with which you acquired the
software.
2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE
RIGHTS.
a. Specific Use. Company designed this device for a specific use.
You may only use the software for that use.
b. Included Microsoft Programs and Additional Required
Licenses. Except as provided below, these license terms apply
to all Microsoft programs included with the software. If the license
terms with any of those programs give you other rights that do not
expressly conflict with these license terms, you also have those
rights.
i. This agreement does not grant you any rights with respect to
the Windows Mobile Device Center, Microsoft ActiveSync or
Microsoft Outlook 2007 Trial which are subject to the licenses
accompanying those items.
c. Speech Recognition. If the software includes speech recognition
component(s), you understand that speech recognition is an
inherently statistical process and that recognition errors are
inherent in the process. Neither Company nor Microsoft or their
suppliers shall be liable for any damages arising out of errors in
the speech recognition process.
d. Phone Functionality. If the device software includes phone
functionality, all or certain portions of the device software may be
inoperable if you do not have and maintain a service account with
a wireless telecommunication carrier (“Mobile Operator”), or if the
Mobile Operator’s network is not operating or configured to
operate with the device.
3. SCOPE OF LICENSE. The software is licensed, not sold. This
agreement only gives you some rights to use the software. Company
and Microsoft reserve all other rights. Unless applicable law gives you
more rights despite this limitation, you may use the software only as
expressly permitted in this agreement. In doing so, you must comply
with any technical limitations in the software that allow you to use it
only in certain ways. You may not:
• work around any technical limitations in the software;
• reverse engineer, decompile or disassemble the software;
• make more copies of the software than specified in this
agreement;
• publish the software for others to copy;
• rent, lease or lend the software; or
• use the software for commercial software hosting services.
Except as expressly provided in this agreement, rights to access the
software on this device do not give you any right to implement
Microsoft patents or other Microsoft intellectual property in software or
devices that access this device.
You may use remote access technologies in the software such as
Remote Desktop Mobile to access the software remotely from a
computer or server. You are responsible for obtaining any licenses
required for use of the protocols to access other software.
4. INTERNET-BASED SERVICES. Microsoft provides Internet-based
services with the software. Microsoft may change or cancel them at
any time.
a. Consent for Internet-Based Services. The software features
described below connect to Microsoft or service provider
computer systems over the Internet. In some cases, you will not
receive a separate notice when they connect. You may switch off
some of these features or not use them. For more information
about these features, visit http://go.microsoft.com/fwlink/
?LinkId=81931.
By using these features, you consent to the transmission of
this information. Microsoft does not use the information to identify
or contact you.
Device Information. The following features use Internet protocols,
which send to the appropriate systems device information, such as
your Internet protocol address, the type of operating system,
browser and name and version of the software you are using, and
the language code of the device where you installed the software.
Microsoft uses this information to make the Internet-based
services available to you.
•Windows Mobile Update Feature. The Windows Mobile
Update feature provides you the ability to obtain and install
software updates on your device if updates are available. You
may choose not to use this feature. Company and/or your
Mobile Operator may not support this feature or an update for
your device.
•Windows Media Digital Rights Management. Content owners
use Windows Media digital rights management technology
(WMDRM) to protect their intellectual property, including
copyrights. This software and third party software use WMDRM
to play and copy WMDRM-protected content. If the software fails
to protect the content, content owners may ask Microsoft to
revoke the software’s ability to use WMDRM to play or copy
protected content. Revocation does not affect other content.
When you download licenses for protected content, you agree
that Microsoft may include a revocation list with the licenses.
Content owners may require you to upgrade WMDRM to access
their content. Microsoft software that includes WMDRM will ask
for your consent prior to the upgrade. If you decline an upgrade,
you will not be able to access content that requires the upgrade.
b. Misuse of Internet-based Services. You may not use these
services in any way that could harm them or impair anyone else’s
use of them. You may not use the services to try to gain
unauthorized access to any service, data, account or network by
any means.
5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The
software may include MPEG-4 visual decoding technology. This
technology is a format for data compression of video information.
MPEG LA, L.L.C. requires this notice:
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES
WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR
INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT
CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A
BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY;
AND (B) OTHER USES SPECIFICALLY AND SEPARATELY
LICENSED BY MPEG LA, L.L.C.
If you have questions about the MPEG-4 visual standard, please
contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver,
CO 80206; www.mpegla.com.
6. DIGITAL CERTIFICATES. The software uses digital certificates in
X.509 format. These digital certificates are used for authentication.
7. CONNECTIVITY SOFTWARE. Your device package may include
Windows Mobile Device Center or Microsoft ActiveSync software. If it
is included, then you may install and use it in accordance with the
license terms that are provided with it. If no license terms are
provided, then you may install and use only one (1) copy of the
software on a single computer.
8. NETWORK ACCESS. If you are using a network, such as an
employer network, the network administrator may limit features or
functionality on your device.
9. PRODUCT SUPPORT. Contact Company for support options.
Refer to the support number provided with the device.
10. LINKS TO THIRD PARTY WEBSITES. If the software provides
links to third party websites, those links are provided to you only as a
convenience, and the inclusion of any link does not imply an
endorsement of the third party website by Microsoft.
11. BACKUP COPY. You may make one backup copy of the software.
You may use it only to reinstall the software on the device.
12. PROOF OF LICENSE. If you acquired the software on the device,
or on a disc or other media, a genuine Certificate of Authenticity label
with a genuine copy of the software identifies licensed software. To be
valid, this label must be affixed to the device, or included on or in
Company’s software packaging. If you receive the label separately, it
is not valid. You should keep the label on the device or packaging to
prove that you are licensed to use the software. To identify genuine
Microsoft software, see http://www.howtotell.com.
13. TRANSFER TO A THIRD PARTY. You may transfer the software
only with the device, the Certificate of Authenticity label, and these
license terms directly to a third party. Before the transfer, that party
must agree that these license terms apply to the transfer and use of
the software. You may not retain any copies of the software including
the backup copy.
14. NOT FAULT TOLERANT. The software is not fault tolerant.
Company installed the software on the device and is responsible for
how it operates on the device.
15. RESTRICTED USE. The Microsoft software was designed for
systems that do not require fail-safe performance. You may not use
the Microsoft software in any device or system in which a malfunction
of the software would result in foreseeable risk of injury or death to
any person. This includes operation of nuclear facilities, aircraft
navigation or communication systems and air traffic control.
16. NO WARRANTIES FOR THE SOFTWARE. The software is
provided “as is”. You bear all risks of using it. Microsoft gives no
express warranties, guarantees or conditions. Any warranties you
receive regarding the device or the software do not originate from, and
are not binding on, Microsoft or its affiliates. When allowed by your
local laws, Company and Microsoft exclude implied warranties of
merchantability, fitness for a particular purpose and non-infringement.
17. LIABILITY LIMITATIONS. You can recover from Microsoft and its
affiliates only direct damages up to fifty U.S. Dollars (U.S. $50.00), or
equivalent in local currency. You cannot recover any other damages,
including consequential, lost profits, special, indirect or incidental
damages.
This limitation applies to:
• anything related to the software, services, content (including
code) on third party internet sites, or third party programs, and
• claims for breach of contract, breach of warranty, guarantee or
condition, strict liability, negligence, or other tort to the extent
permitted by applicable law.
It also applies even if Microsoft should have been aware of the
possibility of the damages. The above limitation may not apply to you
because your country may not allow the exclusion or limitation of
incidental, consequential or other damages.
18. EXPORT RESTRICTIONS. The software is subject to United
States export laws and regulations. You must comply with all domestic
and international export laws and regulations that apply to the
software. These laws include restrictions on destinations, end users
and end use. For additional information, see www.microsoft.com/
exporting.
Zebra End-user License
Agreement
IMPORTANT PLEASE READ CAREFULLY: This End User License
Agreement (“EULA”) is a legal agreement between you (either an
individual or a single entity) (“Licensee”) and Zebra International
Holdings Corporation (“Zebra”) for software, owned by Zebra and its
affiliated companies and its third party suppliers and licensors, that
accompanies this EULA, which includes machine-readable
instructions used by a processor to perform specific operations other
than machine-readable instructions used for the sole purpose of
booting hardware during a startup sequence (“Software”). BY USING
THE SOFTWARE, YOU ACKNOWLEDGE ACCEPTANCE OF THE
TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THESE TERMS,
DO NOT USE THE SOFTWARE.
1. GRANT OF LICENSE. Zebra grants you, End-User Customer, the
following rights provided that you comply with all terms and conditions
of this EULA: For Software associated with Zebra hardware, Zebra
hereby grants you a limited, personal, non-exclusive license during
the term of this Agreement to use the Software solely and exclusively
for your internal use in support of the operation of your associated
Zebra hardware and for no other purpose. To the extent that any
portion of the Software is provided to you in a manner that is designed
to be installed by you, you may install one copy of the installable
Software on one hard disk or other device storage for one printer,
computer, workstation, terminal, controller, access point or other
digital electronic device, as applicable (an “Electronic Device”), and
you may access and use that Software as installed on that Electronic
Device so long as only one copy of such Software is in operation. For
a standalone Software application, you may install, use, access,
display and run only the number of copies of the Software to which
you are entitled. You may make one copy of the Software in machine
readable form for backup purposes only, provided that the backup
copy must include all copyright or other proprietary notices contained
on the original. In the absence of a support contract, you are entitled,
for a period of ninety (90) days from when the instance of Software (or
hardware including the Software) are first shipped by Zebra or
downloaded by End-User Customer, to obtain, if available, updates,
from Zebra and operational technical support, not including
implementation, integration or deployment support (“Entitlement
Period”). You may not obtain updates from Zebra after the Entitlement
Period, unless covered by a Zebra support contract or other written
agreement with Zebra.
Certain items of the Software may be subject to open source licenses.
The open source license provisions may override some of the terms of
this EULA. Zebra makes the applicable open source licenses
available to you on a Legal Notices readme file available on your
device and/or in System Reference guides or in Command Line
Interface (CLI) Reference guides associated with certain Zebra
products.
1.1 Authorized Users. For a standalone Software application, the
licenses granted are subject to the condition that you ensure the
maximum number of authorized users accessing and using the
Software either alone or concurrently is equal to the number of user
licenses for which you are entitled to use either through a Zebra
channel partner member or Zebra. You may purchase additional user
licenses at any time upon payment of the appropriate fees to the
Zebra channel partner member or Zebra.
1.2 Software Transfer. You may only transfer this EULA and the rights
to the Software or updates granted herein to a third party in
connection with the support or sale of a device which the Software
accompanied or in connection with a standalone Software application
during the Entitlement Period or as covered by a Zebra support
contract. In such event, the transfer must include all of the Software
(including all component parts, the media and printed materials, any
upgrades, and this EULA) and you may not retain any copies of the
Software. The transfer may not be an indirect transfer, such as a
consignment. Prior to the transfer, the end user receiving the Software
must agree to all the EULA terms. If Licensee is purchasing Zebra
Products and licensing Software for end use by a U.S. Government
end user, Licensee may transfer such Software license, but only if: (i)
Licensee transfers all copies of such Software to the U.S. Government
end user or to an interim transferee, and (ii) Licensee has first
obtained from the transferee (if applicable) and ultimate end user an
enforceable end user license agreement containing restrictions
substantially identical to the ones contained in this Agreement. Except
as stated in the foregoing, Licensee and any transferee(s) authorized
by this provision may not otherwise use or transfer or make available
any Zebra software to any third party nor permit any party to do so.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Zebra reserves all
rights not expressly granted to you in this EULA. The Software is
protected by copyright and other intellectual property laws and
treaties. Zebra or its suppliers own the title, copyright and other
intellectual property rights in the Software. The Software is licensed,
not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to discover
the source code or algorithms of, the Software (except and only to the
extent that such activity is expressly permitted by applicable law not
withstanding this limitation), or modify, or disable any features of, the
Software, or create derivative works based on the Software. You may
not rent, lease, lend, sublicense or provide commercial hosting
services with the Software.
4. CONSENT TO USE OF DATA. You agree that Zebra and its
affiliates may collect and use technical information gathered as part of
the product support services related to the Software provided to you
that does not personally identify you. Zebra and its affiliates may use
this information solely to improve their products or to provide
customized services or technologies to you. At all times this
information will be treated in accordance with Zebra's Privacy Policy,
which can be viewed at: http://www.zebra.com.
5. LOCATION INFORMATION. The Software may enable you to
collect location-based data from one or more client devices which may
allow you to track the actual location of those client devices. Zebra
specifically disclaims any liability for your use or misuse of the
location-based data. You agree to pay all reasonable costs and
expenses of Zebra arising from or related to third party claims
resulting from your use of the location-based data.
6. SOFTWARE RELEASES. During the Entitlement Period, Zebra or
Zebra's channel partner members may make available to you software
releases as they become available after the date you obtain your initial
copy of the Software. This EULA applies to all and any component of
the release that Zebra may make available to you after the date you
obtain your initial copy of the Software, unless Zebra provides other
license terms along with such release. To receive Software provided
through the release, you must first be licensed for the Software
identified by Zebra as entitled to the release. We recommend that you
periodically check availability of a Zebra support contract to ensure
that you are entitled to receive any available Software releases. Some
features of the Software may require you to have access to the
internet and may be subject to restrictions imposed by your network or
internet provider.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to comply
with all applicable international and national laws that apply to the
Software, including all the applicable export restriction laws and
regulations.
8. ASSIGNMENT. You may not assign this Agreement or any of your
rights or obligations hereunder (by operation of law or otherwise)
without the prior written consent of Zebra. Zebra may assign this
Agreement and its rights and obligations without your consent. Subject
to the foregoing, this Agreement shall be binding upon and inure to the
benefit of the parties to it and their respective legal representatives,
successors and permitted assigns.
9. TERMINATION. This EULA is effective until terminated. Your rights
under this License will terminate automatically without notice from
Zebra if you fail to comply with any of the terms and conditions of this
EULA. Zebra may terminate this Agreement by offering you a
superseding Agreement for the Software or for any new release of the
Software and conditioning your continued use of the Software or such
new release on your acceptance of such superseding Agreement.
Upon termination of this EULA, you must cease all use of the Software
and destroy all copies, full or partial, of the Software.
10. DISCLAIMER OF WARRANTY. UNLESS SEPARATELY STATED
IN A WRITTEN EXPRESS LIMITED WARRANTY, ALL SOFTWARE
PROVIDED BY ZEBRA IS PROVIDED “AS IS” AND ON AN “AS
AVAILABLE” BASIS, WITHOUT WARRANTIES OF ANY KIND FROM
ZEBRA, EITHER EXPRESS OR IMPLIED. TO THE FULLEST
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, ZEBRA
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY
OR WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR
PURPOSE, RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF
VIRUSES, NON INFRINGEMENT OF THIRD PARTY RIGHTS OR
OTHER VIOLATION OF RIGHTS. ZEBRA DOES NOT WARRANT
THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR FREE. TO THE EXTENT THAT THE
SOFTWARE COVERED BY THIS EULA INCLUDES EMULATION
LIBRARIES, SUCH EMULATION LIBRARIES DO NOT WORK 100%
CORRECTLY OR COVER 100% OF THE FUNCTIONALITY BEING
EMULATED, ARE OFFERED “AS IS” AND WITH ALL FAULTS, AND
ALL THE DISCLAIMERS AND LIMITATIONS CONTAINED IN THIS
PARAGRAPH AND THIS AGREEMENT APPLY TO SUCH
EMULATION LIBRARIES. SOME JURISDICTIONS DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS OF IMPLIED WARRANTIES, SO
THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO
YOU. NO ADVICE OR INFORMATION, WHETHER ORAL OR
WRITTEN, OBTAINED BY YOU FROM ZEBRA OR ITS AFFILIATES
SHALL BE DEEMED TO ALTER THIS DISCLAIMER BY ZEBRA OF
WARRANTY REGARDING THE SOFTWARE, OR TO CREATE ANY
WARRANTY OF ANY SORT FROM ZEBRA.
11. THIRD-PARTY APPLICATIONS. Certain third party applications
may be included with, or downloaded with this Software. Zebra makes
no representations whatsoever about any of these applications. Since
Zebra has no control over such applications, you acknowledge and
agree that Zebra is not responsible for such applications. You
expressly acknowledge and agree that use of third party applications
is at your sole risk and that the entire risk of unsatisfactory quality,
performance, accuracy and effort is with you. You agree that Zebra
shall not be responsible or liable, directly or indirectly, for any damage
or loss, including but not limited to any damage to or loss of data,
caused or alleged to be caused by, or in connection with, use of or
reliance on any such third party content, products, or services
available on or through any such application. You acknowledge and
agree that the use of any third-party application is governed by such
third party application provider's Terms of Use, License Agreement,
Privacy Policy, or other such agreement and that any information or
personal data you provide, whether knowingly or unknowingly, to such
third-party application provider, will be subject to such third party
application provider's privacy policy, if such a policy exists. ZEBRA
DISCLAIMS ANY RESPONSIBILITY FOR ANY DISCLOSURE OF
INFORMATION OR ANY OTHER PRACTICES OF ANY THIRD
PARTY APPLICATION PROVIDER. ZEBRA EXPRESSLY
DISCLAIMS ANY WARRANTY REGARDING WHETHER YOUR
PERSONAL INFORMATION IS CAPTURED BY ANY THIRD PARTY
APPLICATION PROVIDER OR THE USE TO WHICH SUCH
PERSONAL INFORMATION MAY BE PUT BY SUCH THIRD PARTY
APPLICATION PROVIDER.
12. LIMITATION OF LIABILITY. ZEBRA WILL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO
THE USE OR THE INABILITY TO USE THE SOFTWARE OR ANY
THIRD PARTY APPLICATION, ITS CONTENT OR FUNCTIONALITY,
INCLUDING BUT NOT LIMITED TO DAMAGES CAUSED BY OR
RELATED TO ERRORS, OMISSIONS, INTERRUPTIONS,
DEFECTS, DELAY IN OPERATION OR TRANSMISSION,
COMPUTER VIRUS, FAILURE TO CONNECT, NETWORK
CHARGES, IN-APP PURCHASES, AND ALL OTHER DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF ZEBRA HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY
TO YOU. NOTWITHSTANDING THE FOREGOING, ZEBRA'S TOTAL
LIABILITY TO YOU FOR ALL LOSSES, DAMAGES, CAUSES OF
ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF YOUR
USE OF THE SOFTWARE OR THIRD PARTY APPLICATIONS, OR
ANY OTHER PROVISION OF THIS EULA, SHALL NOT EXCEED
THE FAIR MARKET VALUE OF THE SOFTWARE OR AMOUNT
PURCHASER PAID SPECIFICALLY FOR THE SOFTWARE. THE
FOREGOING LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS
(INCLUDING SECTIONS 10, 11, 12, AND 15) SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF
ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
13. INJUNCTIVE RELIEF. You acknowledge that, in the event you
breach any provision of this Agreement, Zebra will not have an
adequate remedy in money or damages. Zebra shall therefore be
entitled to obtain an injunction against such breach from any court of
competent jurisdiction immediately upon request without posting
bond. Zebra's right to obtain injunctive relief shall not limit its right to
seek further remedies.
14. MODIFICATION. No modification of this Agreement shall be
binding unless it is in writing and is signed by an authorized
representative of the party against whom enforcement of the
modification is sought.
15. U.S. GOVERNMENT END USERS RESTRICTED RIGHTS. This
provision only applies to U.S. Government end users. The Software is
a “commercial item” as that term is defined at 48 C.F.R. Part 2.101,
consisting of “commercial computer software” and “computer software
documentation” as such terms are defined in 48 C.F.R. Part 252.227-
7014(a)(1) and 48 C.F.R. Part 252.227-7014(a)(5), and used in 48
C.F.R. Part 12.212 and 48 C.F.R. Part 227.7202, as applicable.
Consistent with 48 C.F.R. Part 12.212, 48 C.F.R. Part 252.227-7015,
48 C.F.R. Part 227.7202-1 through 227.7202-4, 48 C.F.R. Part 52.227-
19, and other relevant sections of the Code of Federal Regulations, as
applicable, the Software is distributed and licensed to U.S.
Government end users (a) only as a commercial item, and (b) with
only those rights as are granted to all other end users pursuant to the
terms and conditions contained herein.
16. APPLICABLE LAW. This EULA is governed by the laws of the
state of Illinois, without regard to its conflict of law provisions. This
EULA shall not be governed by the UN Convention on Contracts for
the International Sale of Goods, the application of which is expressly
excluded.
Service Information
Before you use the unit, it must be configured to operate in
your facility’s network and run your applications.
If you have a problem running your unit or using your
equipment, contact your facility’s Technical or Systems
Support. If there is a problem with the equipment, they will
contact the Zebra Global Customer Support at http://
www.zebra.com/support.
For the latest version of this guide go to: http://
www.zebra.com/support.
Software Support
Zebra wants to ensure that customers have the latest entitled
software at the time of device purchase in order to keep the
device operating at peak performance levels. To confirm that
your Zebra device has the latest entitled software available at
the time of purchase, visit http://www.zebra.com/support.
Check for the latest software from Support > Products, or
search for the device and select Support > Software
Downloads.
If your device does not have the latest entitled software as of
your device purchase date, e-mail Zebra at
entitlementservices@zebra.com and ensure you include the
following essential device information:
•
Model number
•
Serial number
•
Proof of purchase
•
Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the
latest version of software, as of the date you purchased your
device, you will receive an e-mail containing a link directing
you to a Zebra Web site to download the appropriate
software.
⚗㫋幐