Zebra Technologies TC80NH Mobile Computer User Manual Regulatory

Download:
Mirror Download [FCC.gov]
Document ID	2808448
Application ID	79mmrqqz6Lr7QCsCs3SPJA==
Document Description	User Manual Regulatory
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.68kB (1796041 bits)
Date Submitted	2015-11-10 00:00:00
Date Available	2016-05-09 00:00:00
Creation Date	2017-09-03 21:04:24
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-03 21:04:24
Document Title	TC8000 Regulatory Guide [English] (P/N MN002270A01 Rev. A)
Document Creator	FrameMaker 12.0.4
Document Author:	Symbol Technologies LLC

Introduction
For detail information on using the TC8000, download the TC8000 User
Guide. Go to the Zebra Support site: http://www.zebra.com/support.
TC8000
Ergonomic Recommendations
CAUTION
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to Model Number TC80N0 and TC80NH.
All Zebra devices are designed to be compliant with the rules and
regulations in the locations they are sold and will be labeled as required.
Local language translations are available at the following website:
www.zebra.com/support.
Any changes or modifications to Zebra equipment not expressly
approved by Zebra could void the user's authority to operate the
equipment.
For use only with Zebra approved and UL Listed mobile computers,
Zebra approved, and UL Listed/Recognized battery packs.
CAUTION
Only use Zebra approved and UL Listed accessories,
battery packs, and battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.
Declared maximum operating temperature: 50°C.
Bluetooth® Wireless Technology
Touch Computer
Regulatory Guide
This is an approved Bluetooth® product. For more information or to view
the End Product Listing, please visit https://www.bluetooth.org/tpg/
listings.cfm.
Wireless Device Country Approvals
Note: This section is only applicable to WW/WR/EU configurations.
Regulatory markings subject to certification are applied to the device
signifying the radio(s) is/are approved for use in the following countries
and continents: United States, Canada, Japan, China, South Korea,
Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of other
country markings. This is available at: http://www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and the United
Kingdom.
In order to avoid or minimize the potential risk of
ergonomic injury, follow the recommendations below.
Consult with your local Health and Safety Manager to
ensure that you are adhering to your company's
safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
Note: The following section is only applicable for mobile computers.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems). Check
with the manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer about any equipment that has
been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including
either installed or portable wireless equipment, in the area over the air
bag or in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Position the device within easy reach. Be able to access the device
without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to
sound or lights to flash on receipt of a call on public roads is not
permitted.
IMPORTANT: Before installing or using, check state and local laws
regarding windshield mounting and use of equipment.
“The wireless industry reminds you to use your device / phone safely
when driving.”
Warnings for Use of Wireless Devices
CAUTION
Please observe all warning notices with regard to the
usage of wireless devices.
Potentially Hazardous Atmospheres - Vehicles Use
You are reminded of the need to observe restrictions on the use of radio
devices in fuel depots, chemical plants, etc. and areas where the air
contains chemicals or particles such as grain, dust, or metal powders
and any other area where you would normally be advised to turn off your
vehicle engine.
Laser Devices
Class 2 laser scanners use a low power, visible light diode. As with any
very bright light source such as the sun, the user should avoid staring
directly into the light beam. Momentary exposure to a Class 2 laser is not
known to be harmful.
The following statement is required to comply with US and international
regulations.
CAUTION
Use of controls, adjustments, or the performance of
procedures other than those specified herein may
result in hazardous laser light exposure.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by
airport or airline staff. If your device offers a 'flight mode' or similar
feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are requested to
do so in hospitals, clinics, or healthcare facilities. These requests are
designed to prevent possible interference with sensitive medical
equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with independent research and
recommendations by Wireless Technology Research.
Labels Reads
1. LASER LIGHT - DO NOT STARE INTO BEAM CLASS 2 LASER
PRODUCT.
2. CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID
DIRECT EYE EXPOSURE.
3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED
JUNE 24, 2007, AND IEC 60825-1 (Ed.2.0), EN60825-1:2007 AND
IEC/EN 60825-1:2014
two conditions: (1) the device must not produce interference, and (2) the
device must accept any interference to the radio even if the interference
is likely to compromise operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radio électrique subi même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Label Marking: The Term 'IC:' before the radio certification only signifies
that Industry Canada technical specifications were met.
Marking and European Economic Area
(EEA)
The use of 2.4GHz RLANs, for use through the EEA, have the following
restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency
range 2.400 -2.4835 GHz.
Bluetooth® Wireless Technology for use through the EEA has the
following restrictions:
• Maximum radiated transmit power of 100mW EIRP in the frequency
range 2.400 -2.4835 GHz.
RFID devices for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 2W ERP in the frequency range
865.6-867.6MHz.
The use of RFID Devices has varying restrictions for use within the EEA;
please refer to the Zebra Declaration of Conformity (DoC) for details at
http://www.zebra.com/doc.
Statement of Compliance
Zebra hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC and
2011/65/EU. A Declaration of Conformity may be obtained from http://
www.zebra.com/doc.
Waste Electrical and Electronic
Equipment (WEEE)
Review Copy
We reserves the right to make changes to any product to improve
reliability, function, or design. We do not assume any product liability
arising out of, or in connection with, the application or use of any product,
circuit, or application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which our products might be
used. An implied license exists only for equipment, circuits, and
subsystems contained in the products.
This device incorporates the International Roaming feature
(IEEE802.11d), which will ensure the product operates on the correct
channels for the particular country of use.
Warranty
Frequency of Operation – IC
For the complete hardware product warranty statement, go to: http://
www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at: http://www.zebra.com/
support.
CAUTION
5 GHz Only:
The use in the UNII (Unlicensed National Information Infrastructure)
band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other use
will make the operation of this device illegal.
Industry Canada Statement:
CAUTION
CAUTION
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069, U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners.
© 2015 Symbol Technologies LLC. All Rights Reserved.
Operation of the device without regulatory approval
is illegal.
Country Roaming
For the latest version of this guide go to: http://www.zebra.com/support.
MN002270A01 Rev. A — September 2015
Health and Safety
The device for the band 5150-5250 MHz is only for
indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5250-5350 MHz and
5650-5850 MHz and these radars could cause
interference and/or damage to LE-LAN devices
Le dispositive fonctionnant dans la bande 5150-5250
MHz est réservé uniquement pour une utilisation à
l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux. Les utilisateurs de radars
de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des
dommages aux dispositifs LAN-EL..
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels
1 to 11. The range of channels is limited by firmware.
For Safe Installation
•
•
Do not put your phone in a location that obstructs the drivers vision or
interferes with the operation of the Vehicle.
Do not cover an airbag.
Persons with Pacemakers:
•
•
•
•
Should ALWAYS keep the device more than 15 cm (6 inches) from
their pacemaker when turned ON.
Should not carry the device in a breast pocket.
Should use the ear furthest from the pacemaker to minimize the
potential for interference.
If you have any reason to suspect that interference is taking place,
turn OFF your device.
Safety on the Road
Other Medical Devices
Do not take notes or use the device while driving. Jotting down a 'to do'
list or flipping through your address book takes attention away from your
primary responsibility; driving safely.
When driving a car, driving is your first responsibility - Give your full
attention to driving. Check the laws and regulations on the use of
wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good
common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed
dial and redial. If available, these features help you to place your call
without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you
are not moving or before pulling into traffic. Try to plan calls when
your car will be stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your mirrors, then
continue.
5. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving
and suspend conversations that have the potential to divert your
attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident, or medical
emergencies. Remember, it is a free call on your wireless phone! The
call can be made regardless of any security codes and depending on
a network; with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see an
auto accident, crime in progress, or other serious emergency where
lives are in danger, call the Emergency Services (9-1-1 in the US,
and 1-1-2 in Europe) or other local emergency number as you would
want others to do for you.
8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you know
to be stolen, call roadside assistance or other special non-emergency
wireless number.
Please consult your physician or the manufacturer of the medical device
to determine if the operation of your wireless product may interfere with
the medical device.
RF Exposure Guidelines
Safety Information
•
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
• International: The device complies with internationally recognized
standards covering human exposure to electromagnetic fields from
radio devices. For information on 'International' human exposure to
electromagnet fields, refer to the Zebra Declaration of Conformity
(DoC) at: http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless
devices, see http://responsibility.zebra.com/index.php/downloads/,
which is located under Wireless Communications and Health.
• Europe: Hand-Held Devices
This device was tested for typical body worn operation. Use only
Zebra tested and approved belt clips, holsters, and similar
accessories to ensure EU Compliance.
U.S. and Canada: Co-located statement
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or operating
in conjunction with any other transmitter/antenna except those
already approved in this filling.
Hand-Held Devices: This device was tested for typical body worn
operation. Use only Zebra tested and approved belt-clips, holsters,
and similar accessories to ensure FCC Compliance. The use of thirdparty belt clips, holsters, and similar accessories may not comply with
FCC RF exposure compliance requirements, and should be avoided.
To satisfy US and Canadian RF exposure requirements, a transmitting
device must operate with a minimum separation distance of 18 mm or
more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes d'exposition
aux radio fréquences, un dispositif de transmission doit fonctionner avec
une distance de séparation minimale de 18 mm ou plus de corps d'une
personne.
LED Devices
For LED devices which have been evaluated to IEC 62471 and comply
with the Exempt Risk Group, no product labeling requirements apply.
However, the following statement is required to comply with US and
international regulations:
LED Compliance Statement:
Classified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and
EN 62471:2008.
Pulse duration: SE4750:1.7 ms
Radio Frequency Interference
Requirements-FCC
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of 5 GHz WLAN, for use in the U.S., has the following
restriction:
• Notched Band 5.60 - 5.65 GHz
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
Radio Frequency Interference Requirements –
Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLANs, for use in Canada, have the following
restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device is in compliance with the NRC for Industry Canada
applicable to license-exempt radios. Use is allowed with the following
English: For EU Customers: All products at the end of their life
must be returned to Symbol for recycling. For information on how to
return product, please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne : Tous les produits en fin
de cycle de vie doivent être retournés à Symbol pour recyclage.
Pour de plus amples informations sur le retour de produits,
consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Symbol al final de su ciclo de vida para que
sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a Symbol
al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com/
weee.
Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Symbol para reciclagem. Para obter
informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Symbol te worden teruggezonden
voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: .OLHQFL]REV]DUX8QLL(XURSHMVNLHM3URGXNW\Z\FRIDQH]
HNVSORDWDFMLQDOHļ\]ZUµFLÉGRILUP\ SymbolZFHOXLFKXW\OL]DFML
,QIRUPDFMHQDWHPDW]ZURWXSURGXNWµZ]QDMGXMÇVLÛQDVWURQLH
LQWHUQHWRZHMKWWSZZZ]HEUDFRPZHHH
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Symbol k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Symbol vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o
vraèilu izdelka obišèite: http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Symbol för återvinning. Information
om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til
recirkulering, når de er udtjent. Læs oplysningerne om returnering
af produkter på: http://www.zebra.com/weee.
Ε
ην ά: Γ α π
. .: Ό α α π ο
α, ο
ο
α
ου , π π α π
φο α
Symbol γ α
α α
. Γα π
π
οφο
χ
π
οφ
π ο
ο , π
φ
υ
http://
www.zebra.com/weee ο α
υο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar talħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Symbol għarriċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Nota: A marca de certificação se aplica ao Transceptor, modelo TC8000.
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e atende
aos requisitos técnicos aplicados, incluindo os limites de exposição da
Taxa de Absorção Específica referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência, de acordo com as Resoluções n°
303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de exposição à
radiofrequência quando posicionado pelo menos X centímetros de
distância do corpo. Para maiores informações, consulte o site da Anatel.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
This device complies with the Resolution Not 403 of 2008, of the
Undersecretary of telecommunications, relating to electromagnetic
radiation.
China
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for
indoor operation only.
Symbol Technologies LLC End User
License Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU
DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL
TECHNOLOGIES IS NOT WILLING TO LICENSE THE PRODUCT TO
YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT.
Grant of License. Symbol Technologies grants you (“Licensee” or “you”)
a personal, nonexclusive, nontransferable, nonassignable, no cost
license to use the software and documentation (“Product(s)”) subject to
the terms and conditions of this Agreement. You shall use the Products
only for your internal business purposes, exclusively to support Symbol
Technologies devices. Any use of the Products outside of the conditions
set forth herein is strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your License. In the
event of a breach of this Agreement, Symbol Technologies will be
entitled to all available remedies at law or in equity (including immediate
injunctive relief and repossession of all Products unless Licensee is a
Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-export,
resell, ship or divert or cause to be exported, re-exported, resold,
shipped or diverted, directly or indirectly, the Products under this
Agreement. You shall not, and shall not permit others to: (i) modify,
translate, decompile, bootleg, reverse engineer, disassemble, or extract
the inner workings of the Products, (ii) copy the look-and-feel or
functionality of the Products; (iii) remove any proprietary notices, marks,
labels, or logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Symbol Technologies' prior written
consent; or (v) utilize any computer software or hardware which is
designed to defeat any copy protection device, should the Products be
equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any time and
remains vested exclusively in Symbol Technologies. All intellectual
property developed, originated, or prepared by Symbol Technologies in
connection with the Products remain vested exclusively in Symbol
Technologies, and this Agreement does not grant to Licensee any
intellectual property rights.
or weapons systems, in which the failure of the Products could lead
directly to death, personal injury, or severe physical or environmental
damage (“High Risk Activities”). Symbol Technologies and its suppliers
specifically disclaim any express or implied warranty of fitness for High
Risk Activities, and if you elect to use the Products in any High Risk
Activities, you agree to indemnify, defend, and hold Symbol Technologies
harmless from and against any and all costs, damages, and losses
related to that use.
U.S. Government. If you are acquiring the Products on behalf of any unit
or agency of the U.S. Government, the following shall apply. Use,
duplication, or disclosure of the Products is subject to the restrictions set
forth in subparagraphs (c) (1) and (2) of the Commercial Computer
Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if
applicable, unless being provided to the Department of Defense. If being
provided to the Department of Defense, use, duplication, or disclosure of
the Products is subject to the restricted rights set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may
not include a Restricted Rights notice, or other notice referring
specifically to the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but only to the
extent that such terms and conditions are not inconsistent with the rights
provided to you under the aforementioned provisions of the FAR and
DFARS, as applicable to the particular procuring agency and
procurement transaction.
Governing Law. This Agreement shall be governed by the laws of the
United States of America to the extent that they apply and otherwise by
the laws of the State of New York without regard to its conflict of laws
provisions.
Compliance with Laws. Licensee will comply with all applicable laws and
regulations, including export laws and regulations of the United States.
Licensee will not, without the prior authorization of Symbol Technologies
and the appropriate governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or divert, through
direct or indirect means, any item or technical data or direct or indirect
products sold or otherwise furnished to any person within any territory for
which the United States Government or any of its agencies at the time of
the action, requires an export license or other governmental approval.
Violation of this provision will be a material breach of this Agreement,
permitting immediate termination by Symbol Technologies.
CMM Disclosure
ᴿᇩ⢟䍞
䜞Ԭ੃〦
(Parts)
䫻
(Pb)
䠇ኔ䜞Ԭ
䭿
‫ޣ‬ԭ䬢
(Hg) (Cd)
⊔
(Cr(VI))
ཐ⓪㚊
㤥
ཐ⓪ӂ㤥
䟐
(PBB)
(PBDE)
(Metal Parts)
⭫䐥⁗ඍ
(Circuit Modules)
⭫㔼਀⭫㔼㓺Ԭ
(Cables and Cable
Assemblies)
ງᯏૂ㚐ਾ⢟䜞Ԭ
(Plastic and
Polymeric Parts)
‫ݿ‬ᆜૂ‫ݿ‬ᆜ㓺Ԭ
(Optics and Optical
Components)
⭫⊖
(Batteries)
㦻嫷㫋∬㗽 6-7䤓屓⸩冥Ⓟᇭ
2 㺞⽰䈛ᴿᇩ⢟䍞൞䈛䜞Ԭᡶᴿൽ䍞ᶆᯏѣⲺ੡䠅ൽ൞ *%7  㿺
ᇐⲺ䲆䠅 㾷≸ԛсȾ
; 㺞⽰䈛ᴿᇩ⢟䍞㠩ቇ൞䈛䜞ԬⲺḆжൽ䍞ᶆᯏѣⲺ੡䠅䎻࠰ *%7
㿺ᇐ Ⲻ䲆䠅㾷≸Ⱦ Էѐਥ൞↚༺θṯᦤᇔ䱻᛻߫ሯр㺞ѣ
ᢉ ćhĈ Ⲻᢶᵥ৕ഖ䘑 㺂䘑ж↛䈪᱄Ⱦε
This table was created to comply with China RoHS requirements.
Review Copy
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť
po uplynutí doby ich životnosti vrátené spoločnosti Symbol na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Symbol“.
Daugiau informacijos, kaip grąžinti gaminį, rasite: http://
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Symbol otrreizējai pārstrādei. Lai iegūtu
informāciju par produktu nogādāšanu Symbol, lūdzu, skatiet: http://
www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Symbol'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://
www.zebra.com/weee.
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur Complies with EEE.
Japan (VCCI) - Voluntary Control Council for
Interference
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.
South Korea
For a radio equipment using 2400 - 2483.5 MHz or 5725 - 5825 MHz, the
following two expression should be displayed:
䟊╏ ⱨ㉔㉘⽸⏈ 㟨㟝 㩅 㤸䑀䝰㐔 ᴴ⏙㉥㢨 㢼㢀
䚨␭Gⱨ㉔㉘⽸⏈G㤸䑀䝰㐔Gᴴ⏙㉥㢨G㢼㡰⳴⦐G㢬⮹㙼㤸ḰGḴ⥜═G㉐⽸
㏘⏈G䚔G㍌G㛺㏩⏼␘
Taiwan
㠪⚓
վ࣏⦷䴫⌒䕫ሴᙗ䴫₏㇑⨶䗖⌅
ㅜॱҼọ
㏃රᔿ䂽䅹ਸṬѻվ࣏⦷ሴ乫䴫₏ˈ䶎㏃䁡ਟˈ‫ޜ‬ਨǃ୶㲏ᡆ֯⭘㘵൷нᗇ᫵㠚䆺ᴤ乫⦷ǃ
࣐བྷ࣏⦷ᡆ䆺ᴤ৏䁝䀸ѻ⢩ᙗ৺࣏㜭DŽ
ㅜॱഋọ
վ࣏⦷ሴ乫䴫₏ѻ֯⭘нᗇᖡ丯伋㡚ᆹ‫ޘ‬৺ᒢᬮਸ⌅䙊ؑ˗㏃Ⲭ⨮ᴹᒢᬮ⨮䊑ᱲˈ៹・ণ‫ڌ‬
⭘ˈі᭩ழ㠣❑ᒢᬮᱲᯩᗇ㒬㒼֯⭘DŽ
ࡽ丵ਸ⌅䙊ؑˈᤷ‫׍‬䴫ؑ㾿ᇊ֌ᾝѻ❑㐊䴫䙊ؑDŽ
վ࣏⦷ሴ乫䴫₏丸ᗽਇਸ⌅䙊ؑᡆᐕᾝǃ、ᆨ৺䟛Ⱳ⭘䴫⌒䕫ሴᙗ䴫₏䁝‫ۉ‬ѻᒢᬮDŽ
൘ 6/36.6/46 〝䎛乫ᑦ‫ޗ‬᫽֌ѻ❑㐊䋷䀺ۣ䕨䁝‫ˈۉ‬䲀ᯬᇔ‫⭘֯ޗ‬DŽ
Class B
Ukraine
ሶቑ孔函ቒᇬ㍔⫀⑵䚕孔函䷘榊㽱椫⹂呹⃊尞Ⓟ◣巿↩᧤ᨒ᧿᧿ᨅ᧥ቑ⪉䄥቎⪉ቈሲኌ዆ኖ
% ㍔⫀㔏嫢孔函ቊሼᇭሶቑ孔函ቒᇬ⹅ㄼ䜿⬒ቊ∎䞷ሼቮሶቋት䥽䤓ቋሺ቉ሧቡሼሯᇬሶቑ
孔函ሯ዆ንኇቧኣዉኰንዄዐ♦≰㳮቎扠㘴ሺ቉∎䞷ሸቯቮቋᇬ♦≰椫⹂ትㆤሰ怆ሶሼሶቋ
ሯሥቭቡሼᇭ ♥㔀崻㢝㦇቎㈢ቆ቉㷲ሺሧ♥ቭ㔀ሧትሺ቉ₚሸሧᇭ9&&,%
Д
№ 2008
ч
This is a Class B product based on the standard of the Voluntary Control
Council for Interference from Information Technology Equipment (VCCI).
If this is used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and use the
equipment according to the instruction manual.
Korea Warning Statement for Class B ITE
韥눺ꙹ
i ἽGὤὤ
O ᴴ㥉㟝Gⵝ㋕䋩㐔ὤ㣄
㣠P
ꩡ끞녅껽驩ꓭ
㢨 ὤὤ⏈ ᴴ㥉㟝 Oi Ἵ P 㤸㣄䑀㤵䚝ὤὤ⦐㉐ 㨰⦐ ᴴ㥉㜄㉐
㇠㟝䚌⏈Gᶷ㡸G⯝㤵㡰⦐G䚌⮤ SG⯜☔G㫴㜡㜄㉐G㇠㟝䚔G㍌G㢼㏩
⏼␘ .
Other Countries
Australia
Use of 5 GHz RLANs in Australia is restricted in the following band 5.60 5.65 GHz.
Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)
Regulatory declarations for TC8000 - BRAZIL
For more information consult the website www.anatel.gov.br
Declarações Regulamentares para TC8000 - Brazil
я і
і
ящ
ч х
є
х іч
я я х
х
ях.
ч
№1057,
х
Thailand
เครื่องโทรคมนาคมและอุปกรณ์นี้ มีความสอดคล้องตามข้อกำหนดของ กทช.
Software Support
Symbol wants to ensure that customers have the latest release of
entitled software at the time of product purchase.
To confirm that your Symbol Solutions device shipped with the latest
release of entitled software, visit: www.zebra.com/support. Check for the
latest software from Software Downloads > Product Line/Product > Go.
If your device does not have the latest entitled software release as of
your product purchase date, please e-mail a request to:
entitlementservices@zebra.com.
You must include the following essential device information with your
request:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Symbol that your device is entitled to the latest
software release, you will receive an e-mail containing a link directing
you to a Symbol Web site to download the appropriate software.
Portions of the Products are protected by United States patent and
copyright laws, international treaty provisions, and other applicable laws.
Therefore, you must treat the Products like any other copyrighted
material (e.g., a book or musical recording) except that you may make
one copy of the Product solely for back-up purposes. Unauthorized
duplication of the Products constitutes copyright infringement, and in the
United States is punishable in federal court by fine and imprisonment.
Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU RECEIVE,
NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED,
STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL
TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.
THE PRODUCTS ARE PROVIDED “AS IS.” SYMBOL TECHNOLOGIES
DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS
WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS
IN THE PRODUCTS WILL BE CORRECTED. SYMBOL
TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS.
Some jurisdictions do not allow the exclusion of implied warranties, so
the above exclusion may not apply to you.
Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL
TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL
NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL
TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS
PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER
SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit
limitations of liability for incidental or consequential damages, so the
above exclusions may not apply to you. This Limitation of Liability
provision survives the termination of this Agreement and applies
notwithstanding any contrary provision in this Agreement. Licensee must
bring any action under this Agreement within one (1) year after the cause
of action arises.
Maintenance. Unless provided for in a separate agreement, Symbol
Technologies shall not be responsible for maintenance or field service of
the Products.
High Risk Activities. The Products are not fault-tolerant and are not
designed, manufactured or intended for use or resale as on-line control
software in hazardous environments requiring fail-safe performance,
such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines,
Third Party Software. The Products may contain one or more items of
Third-Party Software. The terms of this Agreement govern your use of
any Third-Party Software UNLESS A SEPARATE THIRD-PARTY
SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF
THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one or more items of
Open Source Software. Open Source Software is software covered by a
publicly available license governed solely under Copyright law, whereas
the complete terms and obligations of such license attach to a licensee
solely through the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of attribution
obligations, distribution obligations, copyleft obligations, and intellectual
property encumbrances. The use of any Open Source Software is
subject to the terms and conditions of this Agreement as well as the
terms and conditions of the corresponding license of each Open Source
Software package. If there is a conflict between the terms and conditions
of this Agreement and the terms and conditions of the Open Source
Software license, the applicable Open Source Software license will take
precedence. Copies of the licenses for the included Open Source
Software, if any, as well as their attributions, acknowledgments, and
software information details, are provided in the electronic copy of this
Agreement, which is available in the Legal Notices or README file
associated with the Product. Symbol Technologies is required to
reproduce the software licenses, acknowledgments and copyright
notices as provided by the authors and owners, thus, all such information
is provided in its native language form, without modification or
translation.
Depending on the license terms of the specific Open Source Software,
source code may not be provided. Please reference and review the
entire Open Source Software information to identify which Open Source
Software packages have source code provided or available. For
instructions on how to obtain a copy of any source code made publicly
available by Symbol Technologies related to Open Source Software
distributed by Symbol Technologies, you may send your request
(including the Symbol Technologies Product name and version, along
with the Open Source Software specifics) in writing to: Symbol
Technologies LLC, Open Source Software Management, One Zebra
Plaza Holtsville, NY USA.
To view additional information regarding licenses, acknowledgments and
required copyright notices for open source packages used in this Symbol
Technologies product, touch Settings > About device > Legal
information > Open source licenses.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Symbol Technologies LLC
Create Date                     : 2007:11:13 15:03:37Z
Keywords                        : TC70, RG, Regulatory, Guide
Modify Date                     : 2015:11:06 14:52:17+08:00
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : TC8000 Regulatory Guide [English] (P/N MN002270A01 Rev. A)
Creator                         : Symbol Technologies LLC
Creator Tool                    : FrameMaker 12.0.4
Metadata Date                   : 2015:11:06 14:52:17+08:00
Copyright                       : 2015
Document ID                     : uuid:a0c1b0a7-c9bd-47f4-b936-e112b7bebe94
Instance ID                     : uuid:58d22b98-0635-4652-ae70-47edcd557768
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools