Zebra Zebranet Wired And Wireless Print Server P1043301 005 Users Manual Servers User Guide

2015-01-26

• Contents
• About This Document
  • Who Should Use This Document
  • How This Document Is Organized
  • Document Conventions
• Introduction
  • Overview
  • Support
    • Browser Support
    • Supported Services
    • Address Administration Protocols
    • Supported Wireless Radio Cards
    • Supported Security Types
  • Printer Requirements
    • Hardware — Wired Print Servers
    • Hardware — Wireless Print Servers
    • Memory Requirements
    • Firmware — 10/100 Print Server
    • Firmware — Wireless
  • Compatibility
  • Specifications
    • External ZebraNet 10/100 Print Server Specifications
    • Internal ZebraNet 10/100 Print Server Specifications
    • Wireless Print Server Specifications
• Installation
  • External ZebraNet 10/100 Print Server
    • Before You Begin
    • Illustration
    • Installation Instructions
  • Internal ZebraNet 10/100 Print Server
  • Wireless Print Servers
  • Install a Radio Card in a Wireless Print Server
    • Wireless Radio Card
    • Compact Flash Wireless Radio Card
• Getting Started
  • Before You Begin
    • Default User ID and Password
  • Printing a Configuration Label — External ZebraNet 10/100 Print Server
  • Printing a Network Configuration Label — Internal ZebraNet 10/100 Print Server and Wireless Print Servers
  • Configuration of Wireless Securities
  • View Wireless Status through the Control Panel
    • LCD Link Status and Wireless Signal Indicators
    • HC100 Wireless Status Indicator Lights
    • ZD500R Wired and Wireless Status Indicator Icons
    • ZT210, ZT220, ZT230, ZT410, and ZT420 Wired and Wireless Status Indicator Lights
  • Determining the Active Print Server
    • Viewing IP Addresses and the Active Print Server
    • Active Device Selection
  • Assigning an IP Address on any Print Server
    • With Dynamic Host Configuration Protocol (DHCP)
    • Assigning an IP Address Without DHCP via ZebraNet Bridge
    • Assigning an IP address Without DHCP from the Control Panel
    • Assigning an IP Address Without DHCP via a Telnet Session
  • Setting and Monitoring Alerts on Any Print Server
    • ZebraLink Alerts
    • Using ZebraNet Bridge
    • Using WebView
  • Checking Print Server Configuration Settings
    • Using ZebraNet Bridge
    • Using WebView
  • Enabling Protocols
    • Using WebView
  • Defaulting ALL Print Servers
    • Using WebView
    • Using ZebraNet Bridge
    • Using a ZPL Command
    • Defaulting the ZebraNet 10/100 Print Server on the 105SL, S4M, PAX4, and External Devices
    • Defaulting the Wireless Print Server on the S4M
    • Defaulting the Print Servers on the ZM400 and ZM600 Printers
    • Defaulting the Print Servers on the ZP Series, LP/TLP 2824 Plus, and G-Series Printers
    • Defaulting the Print Servers on the HC100 Printers
    • Defaulting the Print Servers on the 105SL, PAX4, Xi4, ZE500, and 105SLPlus Printers
    • Defaulting the Print Servers on the ZD500R, ZT210, ZT220, ZT230, ZT410, and ZT420 Printers
    • Defaulting the Print Servers on the ZD500R, ZT230, ZT410, and ZT420 Printers via the Control Panel
• Printing Queues
  • Berkeley Software Distribution (BSD)-Style Print Queue
    • Configuring the Print Queue
  • System V Queue Installation
    • Configuring Operating System V Queue for ZebraNet Printing
    • Prerequisites
    • UNIX Configuration
• Using Printing Protocols
  • IPP
  • FTP
• ZebraLink WebView
  • WebView
    • Home Page
    • View Printer Configuration
    • View and Modify Printer Settings
  • Network Communications Screens
    • Directory Listing
    • Printer Controls
• Print Server Web Pages
  • Print Server Features
    • Status and Configuration
    • Print Server Status
    • Reset
    • Restore
• Control Panel
  • Control Panel Menu Options
    • Wired Network Parameters on the LCD
    • Wireless Network Parameters on the LCD
• Hardware Troubleshooting
  • Troubleshooting the External 10/100 Print Server
    • Resetting to Factory Defaults
    • External ZebraNet 10/100 Print Server Network Status and Status Indicators
    • Troubleshooting the External ZebraNet 10/100 Print Server
  • Troubleshooting the Internal ZebraNet 10/100 Print Server
    • Resetting the Internal ZebraNet 10/100 Print Server to Factory Defaults
    • Internal ZebraNet 10/100 Print Server Network Status and Activity Indicators
  • Troubleshooting the Wireless Print Server
    • ZebraNet n Print Server Will Not Operate on the 5Ghz Band
    • Resetting the Wireless Print Server to Factory Defaults
  • ZebraNet Bridge Discovery or Configuration Problems
  • Unable to Print
    • Ping the Printer
    • Telnet
  • Unable to Configure Device
  • HP JetAdmin or HP Web JetAdmin
  • Wireless Error Messages
  • General Wireless Issues
  • Encryption and Authentication Issues
  • IP Issues
• Frequently Asked Questions
  • FAQs
• Glossary
• Index