Zeeva Int SP0272 Wood Line Bluetooth Speakers User Manual SP 0295 IM

Zeeva International Limited Wood Line Bluetooth Speakers SP 0295 IM

15_SP-0272 UserMan.PDF

Instruction ManualWOODENWIRELESS SPEAKERCongratulations, and thank you for choosing the Wooden Wireless Speaker. This manual will help you operate the Wooden Wireless Speaker, but you should first familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Wooden Wireless Speaker. 1X Wooden Wireless Speaker1X 3.5mm Audio Cable1X Mini USB Cable1X Instruction ManualOn/O switch3.5mm input portLED indicatorMini USB port3.5mm output port• Turn on your phone and ensure its Bluetooth function is activated.• Turn on the speaker go to the pairing mode.• Search your Bluetooth device on your phone by following the phone’s instructions. Refer to your phone's user manual for more information.• After a few second the phone will list the “MERKURY SPB97” as a discoved device. Select it and follow your phone instruction to select this pairing.• Your phone will confirm the pairing, and then press Yes/Ok.• Finally, select to connect with wireless speaker from your phone.To use your wireless speaker, you must first pair your speaker with a phone or a computer. Once your wireless speaker is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.OFF ONPOWER INPUT OUTPUTDC IN 5VLED indicatorPlug the Mini USB to theport.Use the Mini USB cable accessory provided with this speaker. Connect the Mini USB plug to the Mini USB charging port on the speaker positioned at in speaker diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.Mini USB PlugLi-ion battery1200 mAh4.172mm*2wireless speaker,wireless speaker,wireless speaker.wireless speaker.wireless speakerdevicesNOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.SP-0272FCC ID:2ADM5-SP0272

Navigation menu