Zeeva DEEP-0350 BT Earphones User Manual DEEP 0176 IM V3
Zeeva International Limited BT Earphones DEEP 0176 IM V3
Zeeva >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3727792 |
| Application ID | 76+VK5NvpwtR+fKs7zBM9A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 72.91kB (911414 bits) |
| Date Submitted | 2018-01-25 00:00:00 |
| Date Available | 2018-01-25 00:00:00 |
| Creation Date | 2018-01-02 17:32:20 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2018-01-23 18:06:26 |
| Document Title | DEEP-0176_IM_V3 |
| Document Creator | Adobe Illustrator CC 22.0 (Windows) |
DEEP-0176 20180102 V3 Size: 230(H) x 222(W)mm Front Product overview Package contents Power On/Off Power on Slide button to ‘ON’ position to turn on the wireless neckband. It will vibrate for a second with a beep sound and the LED indicator will flash in blue and red. ORION W I R E L E S S Instruction Manual x 1pc N E C K B A N D Instruction Manual Wireless Neckband x 1pc Micro USB Charging Cable x 1pc Power off Slide button to ‘OFF’ position to turn off the wireless neckband. It will vibrate for a second and the LED indicator will go out. Bluetooth pairing 1. Keep the distance between your wireless neckband and mobile phone (or other devices) within 32.8 Feet. 2. Power on the wireless neckband and it will automatically turn to Bluetooth pairing mode. The LED indicator will flash in blue and red. 3. Activate the Bluetooth function on your phone within range and select “DEEP-0176” from the list shown. 4. You will hear a beep sound and the wireless neckband will vibrate for a second after pairing is successful. Reconnect Bluetooth When powered on, the wireless neckband will automatically connect with the last successfully paired device. Technical specification ON OFF 1. Flexible Neckband 2. Charging Port 3. Vol+/Next Track 4. Vol-/Previous Track 5. LED Indicator/ Multi-function Button 6. Magnetic Clasp 7. Power Button Driver Diameter: Frequency Response: Sensitivity: Impedance: Charging Time: Playing Time: Battery Capacity: Battery Type: Receiver Distance: Bluetooth Version: 10 mm 20 Hz - 20 KHz 105 dB +/- 3 dB 32 Ohms 2 Hours 2-3 Hours 170 mAh Li-ion Battery 3.7 V ≤ 32.8 Feet 4.2 How to use Volume control Long press + : Increase volume Long press - : Decrease volume Track control Short press + : Play next track Short press - : Play previous track www.digitalessentials.technology Back How to use FAQ Answering a call When there is an incoming call, the wireless neckband will ring and vibrate, press the call button to answer the incoming call or answer the call via your mobile phone. Ending a call Press the call button once to end the call or hang up via your mobile phone. Rejecting a call Press the call button for 2 seconds when the wireless neckband rings. Redialing a call Double press the call button for redialing the last number that you just called. Ensure that Bluetooth search function of your mobile device is activated. If the product will not turn on: Make sure the product is fully charged. Can I change the battery for the product? This product uses a built-in non-detachable battery which cannot be removed. If the product cannot be recharged: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. Digital Essentials 1-Year Limited Warranty This warranty does not cover normal wear and tear, abusive use or misuse, modification, tampering or by any other cause not related to either materials or workmanship. This warranty does not apply to product used for any industrial, professional or commercial purposes. Charging product 1. Use the Micro USB cable provided with this wireless neckband. 2. Open the cover, connect the Micro USB plug to Micro USB charging port on the wireless neckband, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light will turn red while charging and will turn off once fully charged. NOTE: • You must select a qualified charger from a regular manufacturer. • You must charge the wireless neckband if it has been not used for more than 12 months. USB Plug If the product cannot be paired with your device, please try the following: Ensure that your product is in pairing mode or reconnection mode. Technical Assistance For service on any defective under 12 months warranty policy, please contact Consumer Support. Email: consumersupport@zeeva.com Micro USB Plug Digital Essentials is a brand of Zeeva International Ltd. Keep All Relevant Information for Future Reference Safety instructions for the rechargeable lithium ion battery and charging the product - The input voltage to the product is 5V 1A. - In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging this product. - Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 deg C/104 deg F - Do not heat above 70 deg C/158 deg F, e.g. Do not expose to sunlight or throw into fire. - Switch off the product after use. - Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. - In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-DEEP-0176
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : DEEP-0176_IM_V3 Metadata Date : 2018:01:23 18:06:26+08:00 Modify Date : 2018:01:23 18:06:26+08:00 Create Date : 2018:01:02 17:32:20+09:00 Creator Tool : Adobe Illustrator CC 22.0 (Windows) Thumbnail Width : 256 Thumbnail Height : 208 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19182 bytes, use -b option to extract) Instance ID : uuid:e8fd24c8-9127-4d06-b845-2ebbfa86f9e0 Document ID : xmp.did:86134e7d-aa59-2e4a-8b46-c832730eafbd Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:02dc09bb-bca2-48b0-a575-0466c93f48a4 Derived From Document ID : xmp.did:8f3b95d6-d836-6446-84a9-373041284825 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:22ebc453-39be-6746-8082-fef8386c3381, xmp.iid:86134e7d-aa59-2e4a-8b46-c832730eafbd History When : 2017:09:15 10:04:16+08:00, 2018:01:02 17:32:12+08:00 History Software Agent : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 22.0 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : I:\Common\Order Management\Customer\Ocean State Jobbers\EP-0176\Link\EP-0176 Neckband Front WB_IM.png Manifest Reference Document ID : adobe:docid:photoshop:176fc612-6863-11e7-8e38-d5983aca7fe7 Manifest Reference Instance ID : xmp.iid:b2a03cde-3f91-d54a-987f-9464df4aa213 Ingredients File Path : I:\Common\Order Management\Customer\Ocean State Jobbers\EP-0176\Link\EP-0176 Neckband Front WB_IM.png Ingredients Document ID : adobe:docid:photoshop:176fc612-6863-11e7-8e38-d5983aca7fe7 Ingredients Instance ID : xmp.iid:b2a03cde-3f91-d54a-987f-9464df4aa213 Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 360.536733 Max Page Size H : 310.355477 Max Page Size Unit : Millimeters Font Name : Arial-BoldItalicMT, GeosansLight, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold Font Family : Arial, GeosansLight, Myriad Pro, Myriad Pro, Myriad Pro Font Face : Bold Italic, Regular, Regular, Semibold, Bold Font Type : Open Type, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.22, 1.0 , OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28 Font Composite : False, False, False, False, False Font File Name : arialbi.ttf, GeosansLight.ttf, MyriadPro-Regular_1.otf, Myriad Pro Semibold.ttf, MyriadPro-Bold_0.otf Plate Names : Cyan, Magenta, Yellow, Black, Information, Diecut Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : Diecut, Information, Guide, PANTONE 200 C, PANTONE 877 C, PANTONE 3005 C Swatch Colorant Type : SPOT, SPOT, SPOT, SPOT, SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : CMYK, CMYK, CMYK, Lab, Lab, Lab Swatch Colorant Cyan : 0.000000, 0.000000, 100.000000 Swatch Colorant Magenta : 100.000000, 0.000000, 0.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000 Swatch Colorant Black : 0.000000, 100.000000, 0.000000 Swatch Colorant L : 41.568626, 59.607841, 43.921570 Swatch Colorant A : 66, -1, -21 Swatch Colorant B : 34, -1, -58 Producer : Adobe PDF library 15.00 Page Count : 1 Creator : Adobe Illustrator CC 22.0 (Windows)EXIF Metadata provided by EXIF.tools