Zeeva HP-0550 Prime Wireless Headphone User Manual IM HP 0550 LB
Zeeva International Limited Prime Wireless Headphone IM HP 0550 LB
Zeeva >
User Manual
Microphone
LED Indicate
Micro USB
Charging port
PRIME WIRELESS HEADPHONES
INSTRUCTION MANUAL
Congratulations, and thank you for
choosing the Prime Wireless Headphones.
This manual will help you operate the
Prime Wireless Headphones, but firstly
you should familiarize yourself with the
Bluetooth functionality of your mobile
phone or other devices before using
the Prime Wireless Headphones.
1 X Micro USB Cable
1 X Instruction Manual
To use your Bluetooth headphones, you must
first pair your headphones with a mobile phone
or other Bluetooth device. Once your Bluetooth
headphones is paired to a specific mobile
phone, they will remain paired and
automatically recognize each other whenever
they are within range.
Use a mobile phone with Bluetooth
function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator turns
blue.
Plug the Micro USB to the Micro
USB port. When charging, the LED
indicator turns red. After full charging,
the LED indicator turns blue.
Answering
a Call
Product Specification
Turn on your phone and ensure the Bluetooth
function is activated.
Turn on the headphones, enter the pairing mode.
Search your Bluetooth devices on your phone
by following the phone’s instructions. Refer
to your phone’s user manual for more
information.
After a few seconds the phone will list the
“BT PRIME HP” as a discover device.
Select it and follow your phone’s instructions
to select this pairing.
Your phone will confirm the pairing, and then
press Yes/OK.
Use the Micro USB cable accessory
provided with this headphones. Connect the
Micro USB plug to the Micro USB
charging port on the headphones positioned
at in headphones diagram on page 2.
Connect the USB plug to a USB port on
a computer or wall adapter to activate
charging.
**Make sure to keep the headphones charging
for a minimum of 6 hours before initial use.
USB Plug Micro USB Plug
1
Please follow the rules depicted in this
manual closely to ensure your safety.
Before using this Bluetooth headphones,
we would strongly encourage you to read
through this user manual.
Do not modify, repair or dismantle this
Bluetooth headphones. Doing so may
result in fires, electric shocks, complete
breakdown of this Bluetooth headphones,
etc. All are not covered under warranty.
Be more wary of any edges, uneven
surfaces, metal parts, accessories and
its packaging so as to prevent any
possible injury or damage.
Do not use an diluent or volatile liquid to
clean the Bluetooth headphones.
Do not use the Bluetooth headphones in a
hazardous location.
1 X Prime Wireless Headphones
Press and hold the On / Off Button
for 3 seconds. After turning on, the
LED indicator flashes red/blue.
Press and hold the On / Off Button
for 3 seconds.
Play / Pause
Music
Press On / Off button to play music
and press it again to pause music.
Driver Diameter 40 mm
105 dB +/- 3 dB
32 Ohms
Li-ion Battery
3.7V
60 mAh
≤32.8 Feet
1.5-2 Hours
2 Hours
Sensitivity
Impedance
Power Supply
Battery Capacity
Voltage
Receiver Distance
Charging Time
Playing Time
Press On / Off button to answer phone
call, press On / Off button again to end call.
Press and hold 2 seconds to reject call.
Double click to redial last call.
4.2. Pairing to Mobile phone or other device 4.3. Charging your headphones
FCC ID: 2ADM5-HP-0550
7. FCC Statement
Finally, select to connect with Prime Wireless
Headphones from your phone.
Charging
Turn off
Pairing
Turn on &
Enter the pairing
mode
2. Packaging Contents 4. How to use1. IntroductionTable of contents
1 Introduction································
2 Packaging Contents·····················
3 Connection Diagram·····················
4 How To Use·······························
4.1 General Function···················
4.2 Pairing To Mobile Phone··········
4.3 Charging Your Product············
5 Product Specification···················
6 FAQ·········································
Statement··································
7 FCC Statement···························
1
2
2
3
3
4
5
6
6
7
8
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable
conditions, please only adopt certified appropriate charger/
adapter for charging the product.
-Only charge the product at ambient temperatures between
10 deg °C/ 50 deg °F
and 40 deg °C/104 deg °F.
- Do not heat above 70 deg °C/158 deg °F, e.g. Do not
expose to sunlight or throw into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any
wrong operation (e.g. Voltage higher than 5V) as this may
result in severe injury or loss of property, and we cannot
control the operating process during the time the user using
this product.
-In extreme cases, abuse or misuse of Lithium battery pack
can lead to explosion, heat generation, fire development or
smoke development.
Safety instructions for the lithium battery and charging the product
Made Exclusively for Five Below
Distributed by Zeeva International Limited
Suite 1006C-8, 10th Floor, Exchange Tower,
33 Wang Chiu Road, Kowloon Bay,
Hong Kong, China
Keep All Relevant Information for Future Reference
Warning:
• You must select a qualified charger from
a regular manufacturer.
• You must charge the Bluetooth headphones
if it has not been used for more than 12 months.
1
1. Why is there no power even when the headphones
is turned on ?
Ans: Ensure the battery has been charged up to
1 hour for initial use.
2. There is no sound when playback.
Ans: Check the connection between headphones with
phone or computer, if the connection is not established,
please connect again. Make sure the headphones is
paired and connected with your target phone or other
master device.