Zeeva MA-1999 Bluetooth headset User Manual Muve Acoustics EVPKE Usermanual

Download:
Mirror Download [FCC.gov]
Document ID	3024418
Application ID	RpMyju+o4d3T3QOH/CAj8w==
Document Description	15_MA-1999 UserMan.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.97kB (187186 bits)
Date Submitted	2016-06-11 00:00:00
Date Available	2016-06-11 00:00:00
Creation Date	2016-04-19 11:25:53
Producing Software	Acrobat Elements 7.0.5 (Windows)
Document Lastmod	2016-04-20 17:43:58
Document Title	Microsoft Word - Muve Acoustics; EVPKE- Usermanual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User Manual
MA-1999
Introduction
The Bluetooth headset Bone Muve Acoustics; EVPKE is a portable hand free communication
device with A2DP profile built on Bluetooth wireless technology. This headset is designed and
manufactured in accordance with Bluetooth specification VR4.1 which supports adaptive
frequency hopping and allows faster connection, the noise immunity within the wireless area
network is better than the BT V2.1 Headset
Multifunction
button (MFB)
Multifunction
button (MFB)
Audio cable
LED
Detection button
USB
Microphone
Product standard
Bluetooth version：V4.1
Talk tine:：up to 18hours
Standby time：up to 600 hours
Battery standard：Rechargeable lithium polymer battery 430mah
Power adapter output: DC5V 300mA
Charging the headset
Your headset uses a rechargeable battery,you must charge
The battery fully before using the headset for the first time.
1. Plugging the charging cable in the USB charge port
2. The rde indicator lamp remains solid when charging.
3. The fully charging takes1.5 hours
4. The white indicator lamp goes out and the blue indicator
remains solid when charging completed
5. Battery Check: Music mode > detection once
6. Enable multipoint: Pairing mode> detection once
7. Disable multipoint: Pairing mode >detection once
8. Factory Reset: 1) Plug in charger cable into USB port.
2) Hold MFB for 4 seconds. White 2 times @ Blee and 2 long beep.
3) The headset paired device list and users are all cleared.
Power on/off the headset
a.
To power on: Off mode > Hold MFB 4s Steady Blue for 1 sec
b.
To power off: Any mode > Hold MFB 4s Steady White for 1 sec
Voice Prompt
a.
When the headset is on, there will be the automatic voice
prompt: power on
b. When the headser is off, there will be the automatic voice
prompt: power off
c. When being connected successfully, there will be voice
telling: connected
d. When the battery is low,there will be voice
telling: low battery
Voice Telling
When a call comes in, the headset will speak up the caller′
sphone number.
Pair to your Bluetooth phone
1.Pair the Bluetooth headset for the first time
a. The distance between the Bluetooth headset and your
Bluetooth phone would be better within 1 meter when
Pairing ,the closer the better.
b. Press multifunction button for 6 seconds, the headset into
pair statuw. blinking in blue and wgite alternatively
c. Set the phone to search for Bluetooth device.
d. When phone finds headset, confirm by selecting
“Muve Acoustics; EVPKE” from list.
e. Enter pin code “0000” when prompted by phone.
f. Repeat steps B-E if the pairing was unsuccessful.
g. If pairing was successful,starts to flash blue.
2. Connect to 2 devices at the same time
a. Press multifunction button for 6 seconds the headset into
pair status. Blinking in blue and red alternatively
b. Set the phone to search for Bluetooth device.
c. When phone finds headset confirm by selecting” Muve Acoustics; EVPKE”
from list..
d. Enter pin code “0000” when prompted by phone.
e. Repeat steps B-E if the pairing was unsuccessful
f. If pairing was successful,starts to flash blue
.Note: Bluetooth headsrt off again,re-open at this time two Bluetooth
Devices will connest automatically.
Answering a call
a. Press the answer key on your phone.
b. Press the multifunction button on your headset.
Ending a call
a. Press the end key on your phone.
b. Press the multifunction button on your headset.
Rejecting s call
a. Press the end key on your phone.
b. Ring mode > Hold MFB 1s
Redialing the last called number
Double press the multifunction button 2 seconds when
Headset is in standby mode.
Activating voice dialing
Your phone must support this function,
Standby mode > Short press MFB
Playing music
When you are listeninh to the music from PC(Music format
Recommended: Windows Media player).you can press play
Pause previous
Important: Please kindly note that the functions or operations
Stated in this user manual is only appliadble to mobile phones which
Support Bluetooth handsfree. please carefully read your phone′s
Instruction guide because the operation might be differen
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : Administrator
Create Date                     : 2016:04:19 11:25:53+08:00
Modify Date                     : 2016:04:20 17:43:58+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Elements 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2016:04:20 17:43:58+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Muve Acoustics; EVPKE- Usermanual
Creator                         : Administrator
Document ID                     : uuid:bea2d1e1-c5ef-4e55-9a2d-df8b06fb4216
Instance ID                     : uuid:6d510bf1-d0f2-43b3-8618-a04a158da528
Page Count                      : 4

EXIF Metadata provided by EXIF.tools