Zeeva SP-0003 Print BT Speaker User Manual 12 21
Zeeva International Limited Print BT Speaker 12 21
Zeeva >
15_SP-0003 UserMan
Instruction Manual
PRINT BLUETOOTH SPEAKER
1X Print Bluetooth Speaker
1X Instruction Manual
1X Micro USB Cable
Light Up
BackFront
On/Off
Switch
Micro USB
Charging Port
Switch the button to the left.
You should use a Bluetooth
function mobile phone or other
Bluetooth Master Device and
to perform pairing action.
Switch the button to the right.
40mmDriver Diameter
4 OhmsImpedance
3.0Bluetooth Version
Battery Capacity 300mAh Lithium Battery
1-2 HoursPlaying Time
32.8 FeetBluetooth Range
BASS JAXX 1 Introduction································
2 Packaging Contents·····················
3 Product Diagram·························
4 How To Use·······························
4.1 General Function···················
4.2 Pairing To Mobile Phone··········
4.3 Charging Your Product············
5 Product Specification···················
6 FAQ·········································
7 FCC Statement···························
1
2
2
3
3
4
5
6
7
8
Congratulations, and thank you for choosing
the Print Bluetooth Speaker. This manual will
help you operate the Print Bluetooth Speaker,
but you should first familiarize yourself with
the Bluetooth functionality of your mobile
phone or other devices before using the Print
Bluetooth Speaker.
DC 5VON OFF
Bluetooth pairing
Switch off
Switch on &
Enter the pairing
mode
Charging Plug the Micro USB cable to the
DC5V charging port of the device.
To use your Bluetooth speaker, you must
first pair your speaker with a mobile
phone or other Bluetooth device. Once
your Bluetooth speaker is paired to a
specific mobile phone, they will remain
paired and automatically recognize each
other whenever they are within range.
• Turn on your phone and ensure the
Bluetooth function is activated.
• Turn on the speaker, go to the pairing
mode.
• Search your Bluetooth decvices on your
phone by following the phone’s
instructions. Refer to your phone’s user
manual for more information.
• After a few seconds the phone will list the
“Print BT Speaker” as a discover decvice.
Select it and follow your phone’s
instructions to select this pairing.
• Your phone will confirm the pairing, and
then press Yes/OK.
• Finally, select to connect with Print
Bluetooth Speaker from your phone.
4.2 Pairing to Mobile phone or other device
Pairing to a phone and Entertainment:
4.1 General Functions
4. How To Use
Required ActionDesired Result
4.3. Charging your speaker
ValueParameter
5. Product Specification
1. IntroductionTable of contents
1. Why is there no power even when the Bluetooth
Speaker is turned on?
2. There is no sound during playback.
An s: Ensure the battery has been charged up to
6 hours for initial use.
An s: Check the connection between the Bluetooth
Speaker and the phone or computer, if the
connection is not established, please connect
again. Make sure the Bluetooth Speaker is
paired with your Bluetooth enabled device.
6. FAQ 7. FCC Statement
3. Product Diagram
2. Packaging Contents
Use the Micro USB cable accessory provided
with this speaker. Connect the Micro USB plug
to the Micro USB charging port. Then connect
the USB plug to a USB port on a computer or
wall adapter to activate charging.
Distributed by Five Below Merchandising, Inc.
1818 Market Street, Suite 2000
Philadelphia, PA 19103
Made in China
Visit Us At:
www.fivebelow.com
50mm
86mm
Model:SP-0003
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a ClassB digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.