Zeeva SP-0432 Translucent Speaker User Manual IM TranslucentBT Speaker Lab
Zeeva International Limited Translucent Speaker IM TranslucentBT Speaker Lab
Zeeva >
Users Manual
USER MANUAL
1. Use the Micro USB cable provided with this wireless speaker.
2. Connect the Micro USB plug to Micro USB charging port on the speaker, then
connect the USB plug to a USB port on a computer or wall adapter to begin charging.
3. The light will turn red while charging and will turn off once fully charged.
NOTE:
Product Overview
Power on
Slide the ON/OFF Switch to the right.
Slide the ON/OFF Switch to the left.
Power off
Reconnect wireless speaker to your mobile device
4. You will hear a beep sound when pairing is successful.
When powered on, the wireless speaker will automatically connect with the last
successfully paired device.
Pair wireless speaker with your mobile device
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select
“LIGHTUP LEDSPKR” from the list shown.
• You must select a qualified charger from a regular manufacturer.
• You must charge the wireless speaker if it has been not used for more than 12 months.
Translucent Light Up Wireless Speaker x 1pc
Micro USB Charging Cable x 1pc
User Manual x 1
Package Contents
FAQ
If the wireless speaker cannot be paired with your device,
please try the following:
Ensure that your speaker is in pairing mode or reconnection mode.
Ensure that Bluetooth search function of your mobile device is activated.
Charging your wireless speaker
Technical specification
1. Keep the distance between your wireless speaker and mobile phone
(or other devices) within 32.8 Feet.
Driver Diameter: ----------------------------------------------------------- 40mm
Impedance: ----------------------------------------------------------------- 4 Ohms
Frequency Response: --------------------------------------------------- 20Hz - 20KHz
Battery Capacity: ---------------------------------------------------------- 300 mAh
Battery Type: --------------------------------------------------------------- Li-ion Battery 3.7V
Playing time: ---------------------------------------------------------------- 1-2 hours
Bluetooth Range: ---------------------------------------------------------- 32.8 Feet
Bluetooth Version: --------------------------------------------------------- 4.1
If the wireless speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely
and the outlet works. If you use a computer, ensure that it is connected and the
USB port is powered.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2ADM5-SP-0432
RF Warning Statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
Front Back
On/Off
Switch Micro USB
Charging Port
OFF/ON DC5V
LED Light
Indicator