Zeeva VF50012BT Bluetooth Headphones User Manual VF50012BT Manual
Zeeva International Limited Bluetooth Headphones VF50012BT Manual
Zeeva >
Users Manual
Instruction Manual
Introduction A Quick Look at Your Device
FCC StatementImportant Safety Precautions Vivitar One Year Warranty Vivitar One Year Warranty (cont.)
Package Contents
Specifications
Charging Your Headphones Pairing Your Headphones Using Your Headphones
Listening to Music
• MULTI FUNCTION Button: Press to play or pause a track
• Quickly press the next track/volume up button to increase
the volume.
• Quickly press the previous track/volume down button to
decrease the volume.
• Press and hold the next track/volume up button to advance
to the next song in a playlist.
• Press and hold the the previous track/volume down button
to go back to the previous song in a playlist.
The LED indicator light will slowly blink blue every few
seconds during music play.
Note: You can also adjust volume and playback settings on
your phone or connected audio device.
Using the Phone Function
•Answering a Call: Quickly press the MULTI FUNCTION
button to answer an incoming call.
•Ending a Call: Quickly press the MULTI FUNCTION button
to end a call.
•Redial: Double tap the MULTI FUNCTION button to redial
a call.
•Reject Call: Press and hold the MULTI FUNCTION button to
reject the call.
Note: The phone function can only be used when there is a
Bluetooth connection between your headphones and phone.
Your headphones have a built-in, rechargeable lithium-ion
battery. To avoid damage, do not attempt to remove the
battery. The full performance of the battery is only achieved
after a few charging-discharging cycles. Charge the battery
fully before first use. To do so, follow the steps below:
1. Connect one end of the included Micro USB charging
cable to the Micro USB charging port on your headphones.
Then plug the other end of the Micro USB charging cable
into a USB port on your computer or a suitable power
adapter to recharge the internal rechargeable battery.
NOTE: The internal battery of your headphones takes
approximately 2 hours to charge when completely drained.
To maximize performance, it is recommended to charge the
battery for six hours before initial use.
2. When the battery is charging, the LED indicator light will
turn red. The LED indicator light will turn blue when the
battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery.
A charged battery will lose its capacity if it is not used on a
regular basis.
Important
To avoid a complete discharge of the battery, charge your
headphones at least once every six months.
Maintenance and Care
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID# 2ADM5-VF50012BT
This warranty covers the original consumer purchaser only
and is not transferable.
This warranty covers products that fail to function properly
UNDER NORMAL USAGE, due to defects in material or
workmanship. Your product will be repaired or replaced at
no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in
material or workmanship and damages or malfunctions from
other than normal use, including but limited to, repair by
unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting
Information:
Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the
UK or visit our website at www.vivitar.com.
To receive Warranty service along with the name and
address of an authorized product service center, the original
consumer purchaser must contact us for problem
determination and service procedures. Proof of purchase in
the form of a bill of sale or receipted invoice, evidencing that
the product is within the applicable Warranty period(s),
MUST be presented in order to obtain the requested
service. It is your responsibility to properly package and
send any defective products along with a dated copy of
proof of purchase, a written explanation of the problem, and
a valid return address to the authorized service center at
your expense. Do not include any other items or accessories
with the defective product. Any products received by the
authorized service center that are not covered by warranty
will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, OTHER THAN THOSE
EXPRESSLY DESCRIBED ABOVE SHALL APPLY.
DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES
AFTER THE EXPRESS WARRANTY PERIOD STATED
ABOVE. NO OTHER EXPRESS WARRANTY OR
GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY
WITH RESPECT TO THE PRODUCT SHALL BE BINDING
ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT
DISTRIBUTOR’S SOLE DISCRETION -ARE THE
EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO
EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR
SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT,
INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR
RECORDS) CAUSED BY THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT. EXCEPT AS STATED
HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, CONSUMER’S
RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT
SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
CONSUMER WHO PURCHASED THE PRODUCT AND IS
NOT TRANSFERABLE.
This product is manufactured, distributed and sold by
SAKAR International, Inc. All other trademarks are the
property of the respective owner, who has not sponsored,
endorsed or approved this product.
BLUETOOTH HEADPHONES
When using your Vivitar Bluetooth Headphones basic safety
precautions should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR
HEADPHONES.
2. Do not use your headphones near water. Clean using a
soft cloth or paper towel.
3. Do not place your headphones on any wet surfaces.
4. Do not allow children or the infirm to play with your
headphones without adult supervision.
5. Do not expose your headphones to excessive heat, flames
or fire.
6. Always press all buttons carefully. Do not manhandle your
headphones.
7. Do not use in extremely dry environments, as this can lead
to static discharge during usage.
8. Do not expose your headphones to temperatures above
40°C. Keep out of direct sunlight.
9. Do not attempt to repair this product yourself. Contact a
qualified service center if your headphones is in need of
service.
10.Do not drop, puncture or expose your headphones to
excessive trauma.
11. Your headphones are not intended for commercial use.
12. Do not place near objects that generate a strong magnetic
field.
13. Use only the supplied chargers and cables. Unplug this
device when not in use for long periods of time or during
lightning storms.
Bluetooth Version: 4.2
Transmission Frequency Range: 20Hz-20KHz
Bluetooth Range: Up to 32.8 feet (10 meters)
Bluetooth Playing Time: Approximately 4 Hours
Standby Time: Approximately 6 Hours
Charge Time: Approximately 2 Hours
Battery Type: 300mAh 3.7V Lithium-Ion Battery
Driver Diameter: 40mm
Your headphones can be paired with most Bluetooth
devices including iPads, iPhones, iPod Touch, and most
smartphones, laptops and tablets. To pair your headphones
with a phone, follow the steps below:
1. Press and hold Multi-function button until your
headphones power on. Once your headphones are
powered on, the LED indicator light will alternately flash blue
and red, blinking rapidly. This indicates that your
headphones are in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select “Viv headphone” to
start connecting.
4. Enter “0000” if your device asks for the PIN code.
5. Once paired, the LED indicator light will stop blinking and
steadily shine blue. Note that anytime music is playing, the
LED indicator light will slowly blink blue every few seconds.
ITEM #: VF50012BT
Micro USB
Charging Cable
Instruction
Manual with
Warranty Info.
VF50012BT Bluetooth
Headphones
Microphone
Micro USB
Charging Port
LED Indicator Light
Next Track / Volume Up
Previous Track / Volume Down
MULTI FUNCTION Button
Thank you for purchasing your Vivitar Bluetooth
Headphones, item VF50012BT. You can use your
headphones with iPads, iPhones, iPods and many other
types of smartphones and Bluetooth devices to stream
music and enjoy hands-free calling. To get the best
results, please read this manual first before using your
device.
-Before using your headphones, inspect the ports and
jacks to make sure that they are clear of dust and debris.
-Use a soft cloth to clean your headphones. Never use any
harsh chemicals or detergents. Make sure your
headphones are dry before using.
-When your headphones are not in use, it should be stored
in a cool, dry place.
-Never tug or yank on the USB cable while they are
connected to your headphones. Connect and disconnect
these cables as carefully as possible.
-Never expose your headphones to high temperatures,
extreme cold, high humidity or excessive moisture or
water.
-Please recycle or dispose of your headphones properly
based on the laws and rules of your municipality. Contact
local recycling facilities and/or the manufacturer of your
earbuds for further information.
50mm
86mm