Zeeva VZ60030BT Bluetooth Speaker User Manual VZ60030BT Manual
Zeeva International Limited Bluetooth Speaker VZ60030BT Manual
Zeeva >
User Manual
![](/img.php?id=3286744&img=bg1.png)
Instruction Manual
ITEM #: VZ60030BT
Introduction A Quick Look at Your Device
FCC StatementImportant Safety Precautions Vivitar One Year Warranty Vivitar One Year Warranty (cont.)
Package Contents
Specifications
Instruction
Manual
with
Warranty Info.
VZ60030BT
Bluetooth
Speaker
Charging Your Speaker Pairing Your Speaker Using Your Speaker
Powering Your Speaker On and OFF
1. Press and hold the ON/OFF button in order to power on
your speaker. If you have already paired your speaker to
your Bluetooth device, they will automatically remain paired
each time you power on your speaker.
2. Press and hold the ON/OFF button in order to power off
your speaker.
Listening to Music
• Play/Pause Button: Press to play or pause a track.
• Quickly tap the “NEXT TRACK/VOLUME +” button to
advance to the next song in a playlist..
• Quickly tap the “PREVIOUS TRACK/VOLUME -” button to
go back to the previous song in a playlist.
• Press and hold the “NEXT TRACK/VOLUME +” button to
increase the volume
• Press and hold the “PREVIOUS TRACK/VOLUME -”
button to decrease the volume.
Note: You can also adjust volume and playback settings on
your phone or connected audio device. When listening to
music from a device that is connected to the speaker’s
Auxiliary Port, the buttons on the speaker may not function
to advance to the next track or return to the previous track.
Using the Phone Function
• Answering a Call: Quickly press the ANSWER button to
answer an incoming call.
• Reject an Incoming Call: Press and hold the ANSWER
button to reject an incoming call.
• Ending a Call: Quickly press the ANSWER button to end a
call.
Note: The phone function can only be used when there is a
Bluetooth connection between your speaker and phone.
Your speaker has a built-in, rechargeable lithium-ion
battery. To avoid damage, do not attempt to remove the
battery. The full performance of the battery is only achieved
after a few charging-discharging cycles. Charge the battery
fully before first use. To do so, follow the steps below:
1. Connect one end of the included Micro USB charging
cable to the Micro USB charging port on your speaker. Then
plug the other end of the Micro USB charging cable into a
USB port on your computer or a suitable power adapter in
order to recharge the internal rechargeable battery.
NOTE: The internal battery of your speaker takes
approximately two hours to charge when completely
drained. To maximize performance, it is recommended to
charge the battery for six hours before initial use.
2. When the battery is charging, the LED indicator light will
turn red. The LED indicator light will turn blue when the
battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery. A
charged battery will lose its capacity if it is not used on a
regular basis.
Important!
To avoid a complete discharge of the battery, charge your
speaker at least once every six months.
Maintenance and Care
This device complies with the part 15 of the FCC rules. Operation is
subject to the following two conditions:(1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions may cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is encouraged
to try to correct the interference by one or more of the following
measures:
__ Reorient or relocate the receiving antenna.
__ Increase the separation between the equipment and receiver.
__ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
__ Consult the dealer or experienced radio/ TV technician for help.
This warranty covers the original consumer purchaser only
and is not transferable.
This warranty covers products that fail to function properly
UNDER NORMAL USAGE, due to defects in material or
workmanship. Your product will be repaired or replaced at
no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in
material or workmanship and damages or malfunctions from
other than normal use, including but limited to, repair by
unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting
Information:
Call 1-800-592-9541 in the U.S. or 0-800-917-4831 in the
UK or visit our website at www.vivitar.com.
To receive Warranty service along with the name and
address of an authorized product service center, the original
consumer purchaser must contact us for problem
determination and service procedures. Proof of purchase in
the form of a bill of sale or receipted invoice, evidencing that
the product is within the applicable Warranty period(s),
MUST be presented in order to obtain the requested
service. It is your responsibility to properly package and
send any defective products along with a dated copy of
proof of purchase, a written explanation of the problem, and
a valid return address to the authorized service center at
your expense. Do not include any other items or accessories
with the defective product. Any products received by the
authorized service center that are not covered by warranty
will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, OTHER THAN THOSE
EXPRESSLY DESCRIBED ABOVE SHALL APPLY.
DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES
AFTER THE EXPRESS WARRANTY PERIOD STATED
ABOVE. NO OTHER EXPRESS WARRANTY OR
GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY
WITH RESPECT TO THE PRODUCT SHALL BE BINDING
ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT
DISTRIBUTOR’S SOLE DISCRETION -ARE THE
EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO
EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS, OR
SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT,
INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES
FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR
RECORDS) CAUSED BY THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT. EXCEPT AS STATED
HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, CONSUMER’S
RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT
SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
CONSUMER WHO PURCHASED THE PRODUCT AND IS
NOT TRANSFERABLE.
This product is manufactured, distributed and sold by
SAKAR International, Inc. All other trademarks are the
property of the respective owner, who has not sponsored,
endorsed or approved this product.
BLUETOOTH SPEAKER
When using your Vivitar Bluetooth Speaker, basic safety
precautions should always be followed, including the
following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR
SPEAKER.
2. Do not use your speaker near water. Clean using a soft
cloth or paper towel.
3. Do not place your speaker on any wet surfaces.
4. Do not allow children or the infirm to play with your speaker
without adult supervision.
5. Do not expose your speaker to excessive heat, flames or
fire.
6. Always press all buttons carefully. Do not manhandle your
speaker.
7. Do not use in extremely dry environments, as this can lead
to static discharge during usage.
8. Do not expose your speaker to temperatures above 40°C.
Keep out of direct sunlight.
9. Do not attempt to repair this product yourself. Contact a
qualified service center if your speaker is in need of service.
10. Do not drop, puncture or expose your speaker to
excessive trauma.
11. Your speaker is not intended for commercial use.
12. Do not place near objects that generate a strong magnetic
field.
13. Use only the supplied chargers and cables. Unplug this
device when not in use for long periods of time or during
lightning storms.
Bluetooth Version: 4.1
Bluetooth Range: Up to 32.8 feet (10 meters)
Power Supply: DC 5V
Battery Type: 1,200 mAh, 3.7V, Lithium-Ion Battery
Charge Time: Approximately 2 Hours
Driver Diameter: 66mm
Impedance: 4 Ohms
Next Track/
Volume +
Microphone
Previous Track/
Volume -
On/Off
Play/Pause
Answer
Top
Back
Front Side
LED Indicator Light
Auxiliary Port
Micro USB
Charging Port
Your speaker can be paired with most Bluetooth devices
including iPads, iPhones, iPod Touches, and most
smartphones, laptops and tablets. In order to pair your
speaker with a phone, follow the steps below:
1. Press and hold the ON/OFF button until your speaker
powers on. The LED indicator light on your speaker will
alternately flash blue and red, blinking rapidly. This
indicates that your speaker is in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select “VZ60030 WL
Speaker” to start connecting.
4. Enter “0000” if your device asks for the PIN code.
5. Once paired, the LED indicator light will slowly blink blue
every few seconds.
Note: If the speaker does not automatically enter into
Bluetooth mode, press the Mode/Pair button to initiate
pairing.
Micro USB
Charging
Cable
3.5mm
Aux
Cable
Thank you for purchasing your Vivitar Bluetooth Speaker,
item VZ60030BT. You can use your speaker with iPads,
iPhones, iPods and many other types of smartphones and
Bluetooth devices to stream music and enjoy hands-free
calling. In order to get the best results when using this
device, please read this manual first before using.
-Before using your speaker, inspect the ports and jacks to
make sure that they are clear of dust and debris before
charging or inserting an AUX cable.
-Use a soft cloth to clean your speaker. Never use any
harsh chemicals or detergents. Make sure your speaker is
dry before using.
-When your speaker is not in use, it should be stored in a
cool, dry place.
-Never tug or yank on the USB cable or AUX cable while
they are connected to your speaker. Connect and
disconnect these cables as carefully as possible.
-Never expose your speaker to high temperatures,
extreme cold, high humidity or excessive moisture or
water.
-Please recycle or dispose of your speaker properly based
on the laws and rules of your municipality. Contact local
recycling facilities and/or the manufacturer of your speaker
for further information.
50mm
86mm
FCC ID: 2ADM5-VZ60030BT