Zentan Technology DSCCS Speed&Cadence; User Manual BLE Combo Instruction

Zentan Technology Co., Ltd. Speed&Cadence; BLE Combo Instruction

Users Manual

User Instruction for Cardiosport Duplex Combo(ZASC1D) Parts drawing: Use: Combo starts automatically when Speed or Cadence is detected and switches off automatically when there is no signal. LED: The Red/Yellow LED will flash when cadence or speed is detected. Operation: The LED stops flashing after the first 10 flashes. Link: To link to Bluetooth smart ready/ANT+ device, select ‘detect sensor’ then press Reset button once to start; The Red (Cadence) and Yellow (Speed) LED will light simultaneously then after linking Combo is ready to use. Cadence Sensor Speed Sensor Reset Button LED
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu