Zentan Technology SYSTEM122A PMS User Manual Cadenec Meter Instructions 040504
Zentan Technology Co., Ltd. PMS Cadenec Meter Instructions 040504
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 482565 |
| Application ID | iz3hc6Jn0Zo5CJCnr0+YTg== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 157.39kB (1967415 bits) |
| Date Submitted | 2004-10-27 00:00:00 |
| Date Available | 2004-10-27 00:00:00 |
| Creation Date | 2004-04-08 16:23:16 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2004-07-26 16:12:17 |
| Document Title | Cadenec Meter Instructions 040504 |
| Document Creator | Adobe PageMaker 7.0 |
| Document Author: | misp |
© 2004 LeMond Fitness All rights reserved © 2004 LeMond Fitness. LeMond, RevMaster, and Pilot are registered trademarks of LeMond Fitness in the United States and other countries. IMPORTANT SAFETY INSTRUCTIONS WARNING BEFORE BEGINNING THIS OR ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. CERTAIN EXERCISES, PROGRAMS, OR TYPES OF EQUIPMENT MAY NOT BE APPROPRIATE FOR ALL INDIVIDUALS, ESPECIALLY IF YOU ARE ABOVE 40 YEARS OF AGE, AND/OR HAVE PRE-EXISTING HEALTH, AND/OR ORTHOPEDIC MEDICAL CONDITIONS. YOUR PHYSICIAN CAN HELP YOU DETERMINE WHAT ACTIVITIES OR PROGRAMS ARE MOST SUITABLE FOR YOU. Page 4 WARRANTY This is to certify that the Pilot© wireless cadence meter is warranted by LeMond Fitness Inc. to be free of all defects in materials and workmanship. This warranty does not apply to any defect caused by negligence, misuse, accident, alteration, improper maintenance, or an “act of God.” The Pilot cadence meter can only be used on the RevMaster indoor cycling bike. Any attempts to use this meter on any other equipment voids the warranty. The Pilot carries a one year warranty on the meter and transmitter. Batteries are not warranted. Contact our Customer Service Department to report any problems. When calling, please be prepared to provide the customer service representative with the following information: Your name, the serial number of the inoperable unit, and the date(s) of purchase for the meter. If warranty replacement parts are shipped to you, you may be required to return the inoperable part. LeMond Fitness Inc. neither makes, assumes nor authorizes any representative or other person to make or assume for us, any other warranty whatsoever, whether expressed or implied, in connection with the sale, service, or shipment of our products. We reserve the right to make changes and improvements in our products without incurring any obligation to similarly alter products previously purchased. In order to maintain your product warranty and to ensure the safe and efficient operation of your cadence meter, only authorized replacement parts can be used. This warranty is void if parts other than those provided by LeMond Fitness are used. SPECIFICATIONS Cadence Meter Heart Rate Range: Heart Rate Accuracy: Battery: Battery Life: 30 to 240 bpm (beats per minute) ± 4 bpm 2 AA batteries 6 months to 1 year, depending on usage Transmitter Emitted Frequency: Battery: Battery Life: 122 kHz 3 AA batteries 6 months to 1 year, depending on usage Page 5 CONTENTS Description Installation to the RevMaster Console Transmitter Magnet Display Window Quick Start Program Custom HR Training and Calorie Calculation Key Functions Cadence Training Heart Rate Training Start-Up Ride I - 30 Minutes Start-Up Ride II - 40 Minutes Troubleshooting Appendix FCC Compliance Changing the Console and Transmitter Codes and Dip Switch Codes Dip Switch Codes Console Codes ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10 12 13 15 16 18 20 23 26 27 28 ○ ○ ○ ○ 30 31 32 33 NOTE: • • • • Page 6 Press any key to turn on the Pilot console. Never disassemble the console or transmitter asit can not be reassembled. The console is water resistant, not water proof. Do not deliberately place it in water. To clean the console, wipe it off with a clean rag sprayed with diluted household cleaner. DESCRIPTION The Pilot assembly consists of a console, a magnet, and a transmitter. A sensor in the transmitter counts the number of times a magnet mounted in the right crank passes the sensor. The transmitter will then send a coded RF (radio frequency) signal to the console containing the measured values. The console has inboard receivers that pick up the signals from the transmitter and from telemetry (chest strap) heart rate signals. The heart rate is then shown in the display window. The console will track cadence (RPMs), speed (MPH/KPH), time, distance, and caloric expenditure. The console and the transmitter use AA batteries as a source of power. Install the supplied batteries in the console and in the transmitter prior to using. Console Battery Installation: 1. Remove the battery cover from the back of the console. 2. Insert 2 AA batteries into the battery compartment and reinstall the battery cover. Page 7 DESCRIPTION Transmitter Battery Installation: 1. Remove the battery cover from the transmitter. 2. Install 3 AA batteries in the battery compartment and reinstall the battery cover. NOTE: • • • • Page 8 Excessive use of the back light [ ]will drain the console batteries prematurely. Expected life of the console batteries is 6 months to 1 year. If the console battery power is low, then “BATT LOW” will be shown in the display window for 2 seconds after the display is turned on to inform you to change the console batteries. Expected life of the transmitter batteries is 6 months to 1 year. INSTALLATION OF THE PILOT THE CADENCE METER CAN ONLY BE INSTALLED ON A LEMOND REVMASTER BIKE. To install the meter, the following tools are needed: • Philips Screwdriver • 4-mm Hex Key (supplied) Console Installation: 1. Ensure that the batteries are installed in the console and the console turns on. 2. Spread the bottom of the console clamp apart and clamp itback together over the top center of the handle bar. Handlebar Console Clamp 3. Mounting Screws Insert a mounting screw into each hole and use a 4-mm hex key to tighten the screws. Page 9 Transmitter: 1. Ensure that the batteries are installed in the transmitter. 2. Use the philips screwdriver to remove the 2 philips head screws from the back cover on the left side of the bike. 3. Using the 4-mm hex key remove the 4 belt cover hex head screws from the right side of the bike. Philips Screws Hex Head Screws Belt Cover 4. 5. Remove the belt cover and place it inside up on the floor. Peel the backing off the adhesive pad on the transmitter. Page 10 6. Position the transmitter over the inside rib and bosses (see picture below) of the belt cover and gently slide into place. Press the transmitter into the belt cover to secure the adhesive backing to the inside belt cover. 7. Boss Rib Boss Belt Cover 7. Reinstall the belt cover. Page 11 Magnet: 1. Rotate the right crank until it is at the 2:00 position. 2. Measure out 2.0” from the inside end of the crank and mark this location. 3. Firmy press the magnet into the groove on the inside crank arm at the measured location (see picture below). 2.0” Magnet Checking the Installation: 1. Turn the console on by pressing START. 2. Rotate the cranks for 10 seconds and verify that the console is picking up the crank rotation and displaying RPM’s in the cadence section of the display window.. 3. If you do not see RPMs in the display window, press the [CADENCE] key repeatedly until “INST” RPM is shown in the display window. If RPMs still do not show, refer to the troubleshooting section of this manual. Page 12 DISPLAY WINDOW CADENCE HEART RATE TIME INST 110 50:00 146 19.0 DISTANCE 350 CALORIES (KCAL) CADENCE Cadence is the measurement of how fast the cranks are rotating in RPM’s. The approximate speed of the bike can also be displayed (MPH/KPH) in this area. TIME Time is the length of time (min:sec) since you pressed the start button. DISTANCE Distance is the measurement of the approximate distance of the bike if the user was riding a bike with tires the same size of the flywheel. Page 13 KCAL Kcal is the approximation of calories burned during your workout. The calories are estimated by measuring your instantaneous heart rate (HR) and factoring in your age, ambient HR, and weight. HEART RATE This is the measurement , by telemetry (chest strap), of your heart rate in beats per minute (BPM). You must wear a chest strap during your workout in order to see your heart rate. The Pilot console will detect heart rate signals from most chest straps that emit an analog signal, or a digital Cardiosport® chest strap. An “A” (analog) or “D” (digital) will be displayed for a few seconds in the heart rate display section of the display window when a HR signal is initially received, to indicate the type of signal being received. WARNING IF AT ANY TIME DURING YOUR WORKOUT YOU FEEL CHEST PAIN, EXPERIENCE SEVERE MUSCULAR DISCOMFORT, FEEL FAINT, OR ARE SHORT OF BREATH, STOP EXERCISING IMMEDIATLELY. IF THE CONDITION PERSISTS, YOU SHOULD CONSULT YOUR MEDICAL DOCTOR IMMEDIATLEY The Pilot also features heart zone training. After selecting your maximum and minium heart rate limits, the console will use flashing up and down arrows over the heart icon to indicate that you need to adjust your intensity either up or down to stay within your selected heart rate zone. See pg. 15 for more info. Page 14 QUICK START PROGRAM Any time you want to bypass entering your personal data and start using the meter, simply press any key to turn on the console. After you press the [START] key, the timer will start counting and the console will start tracking usage information. The Pilot will calculate calories burned based on the following default perimeters for Quick Start Workout: Ambient Heart Rate (AHR): Age: Weight: 70 bpm 30 Years old 175 lbs. Page 15 CUSTOM HEART RATE TRAINING AND CALORIE CALCULATIONS 1. 2. Press and hold the [HR] key until the display window shows “∨ 240.” ∨] key to change the upper limit of your target Use the [∨ heart rate from 240 BPM to your desired beats per minute and press [HR] to select the number. Or, simply press [HR] to accept the default value of 240 BPM. Note: If your heart rate during your workout session is higher than the selected upper limit of your target heart rate range, there will be a ∨” above the heart icon in the display flashing “∨ window. This indicates that you should adjust your workout to bring your heart rate down. 3. 4. The display window will now show “∧ 30.” ∧] key to change the bottom limit of your Use the [∧ target heart rate from 30 BPM to your desired beats per minute and press [HR] to select the number. Or, simply press [HR] to accept the default value of 30 BPM. Note: If your heart rate is lower than the selected bottom limit of your target heart rate ∧” above the range, there will be a flashing “∧ heart icon. This indicates that you should adjust your workout to bring your heart rate up. 5. The lower right portion of the display window will show 70 BPM as the default ambient heart rate (AHR). Page 16 CUSTOM HEART RATE TRAINING AND CALORIE CALCULATIONS (CONT.) 6. 7. 8. 9. 10. 11. 12. ∧] or [∨ ∨] key to change the default Use the [∧ AHR value to your AHR value. Press the [HR] key to select your AHR value. The default age of 30 years old will be displayed. Use ∧] or [∨ ∨] key to change the default age to your age. the [∧ Press the [HR] key to select your age. The default weight of 175 lbs. will be displayed. Use the ∧] or [∨ ∨] key to change the default weight to your [∧ weight. Press the [HR] key to select your weight and return you to the main screen. Press the [START] key to activate the timer and start tracking usage information. Page 17 KEY FUNCTIONS [START] The start key will start the timer and enable the cadence meter to begin calculating HR and Kcal values. [CLEAR] • A short press (< 3 sec) of the clear key will reset the time, distance and calorie measurements. • Pressing and holding the clear key (> 3sec) will reset the AVG (average) and MAX (maximum) values for cadence and HR measurements. In addition, the calorie calculation values will be reset to their default values [STOP] The stop key will stop the calculation of the time, distance and calorie measurements without resetting the values of the measurements. Pressing the start key again will restart the console [CADENCE] The cadence key allows you to change the cadence section of the display window between INST (instantaneous) RPM, AVG (average) RPM, MAX (maximum) RPM, INST (instantaneous) MPH/KPH, AVG (average) MPH/KPH, and MAX (maximum) MPH/KPH. [∧ ] The up arrow allows you to increase the default max HR, min HR, ambient HR, age, and weight for target heart zone training and calorie calculations. Page 18 [∨ ] The down arrow allows you to decrease the default max HR, min HR, ambient HR, age, and weight to select your values for target heart zone training and calorie calculations. [HR] • A short press of the heart rate key allows you to change the display of the HR section of the display window between INST (instantaneous) HR, AVG (average) HR and MAX (maximum) HR. 120 118 • 121 A long press (> 3sec), places you in the HR data entry mode where you can use the [∧] and [∨] keys to select your upper target HR and lower target HR. You can also modify the ambient HR, age, and weight default values for more user specific calorie calculations. 240 30 AHR 70 30 AGE Lb 175 WT Page 19 [ Pressing the light key will back-light the display window for 5 seconds. If another key is pressed while the light is on, the back light will stay on for an additional 5 seconds. As long as keys are pressed with the back light on, the console light will stay on. Note: When the back light is on, all calculations are suspended during this time and heart rate and cadence is not detected. Page 20 CADENCE TRAINING Definition of Cadence How rapidly the cranks are rotated or the rhythm of the pedal stroke; often referred to as RPM (revolutions per minute). Concepts using Cadence for training You can choose the goal of your workout in relation to Resistance, Cadence, and Heart Rate . The intensity of your workout is affected by pedal speed change and the resistance applied. Resistance Used Cadence Light Light Light Heart Rate RPE Feeling RPM 50-70 35%-50% MHR RPM 70-90 50%-60% MHR RPM 90-100 60%-70% MHR 1-2 3-4 Light RPM 100-135 70%-85% MHR 6+ Very easy Easy Steady; comfortable Challenging Moderate RPM 50-70 55%-65% MHR 4-5 Moderate RPM 70-90 65%-75% MHR 5-6 Moderate Moderate RPM 90-100 75%-85% MHR RPM 100+ 85%-100% MHR 6-7 7-10 Heavy RPM 50-60 70%-80% MHR 6-7 Heavy RPM 60-70 80%-85% MHR 7-8 Heavy Heavy RPM 70-80 RPM 80+ 85%-90% MHR 90%-100% MHR 8-9 9-10 Somewhat hard Challenging, steady Hard! Very hard; chasing Hard; talking is hard Very hard; pushing Very Hard!! Maximal Page 21 Resistance Used Speed Change Effects on Heart Rate Light Light Moderate Moderate Lower RPM Higher RPM Lower RPM Higher RPM Heavy Heavy Lower RPM Higher RPM HR remains relaxed HR begins to rise HR near to steady state HR rises from steady state HR rises - hard effort HR rises very hard to maximal effort Warm-Up Warm up is of critical importance to the success of your cycling. The demands of your riding profile should be prepared in the warm-up to achieve maximal results. You must get your working muscles to a temperature of optimum performance where the circulatory system is delivering oxygen and nutrients efficiently to those muscles. Depending on the workout session goal, warm up can take from 15 minute to 20 minutes. Time Recommendations for Specific Training Goals The higher intensity the workout is going to be, the longer the warm-up should be with the appropriate heart rate zones (see Heart Rate Training section) and cadence being reached for a short period of time. 10 min. 5 min. Zone 1 Zone 2 RPM 70-80 RPM 80-90 3 min. Zone 3 RPM 95-100 2 min. Zone 4 RPM 110-120 Page 22 Chat pace to start. Easy ride warm-up ends here (15 mins.) Endurance ride warm-up ends here (18 mins.) Interval training warm-up ends here (20 mins.) Heart Zone HEART RATE TRAINING Training Concepts Based on Heart Rate Monitor Book for Indoor and Outdoor Cyclists by Sally Edwards and Sally Reed. A. Definition: A physical, mental and emotional fitness system which maximizes your training, minimizes your time, and results in measurable cardiovascular health benefits. B. Heart Zone Training (HZT): A system of setting goals, then organizing and executing around them by using a range of heartbeats. C. Principles: 1. HZT is an individualized and personalized program 2. HZT makes it easier to manage now that you can measure and monitor 3. HZT insures that multiple zones give you multiple benefits 4. HZT is a wellness continuum from health fitness performance 5. HZT is a complete system of cardiovascular training. Heart Rate Terms Maximum HR: the highest number of contractions of the heart muscle in one minute. You can determine your MHR by the following calculation: 220 - [10% body weight (lbs.) / 2] + 4 (Male) or 0 (Female) = MHR Delta HR: the difference in heart rate with a change in body position. Page 23 Ambient HR: the number of beats per minute your heart contracts when you are awake but in a sedentary and stationary position. Peak HR: highest heart rate during any one workout period. Recovery HR: the number of beats per minute your heart drops after exercise, usually measured after two minutes of rest. Average HR: the arithmetic average of your heart rate for a period of time. Steady State HR: that heart rate which is held at the same number throughout the exercise period. Threshold HR: that heart rate at the crossover point between aerobic and anaerobic metabolism. Heart Zone Training A. Determine your heart rate (in beats per minute) for the individual heart zones. 1. Zone 1 – Healthy Heart Zone: (50% - 60%) of your Max HR 2. Zone 2 – Temperate Zone: (60% - 70%) of your Max HR 3. Zone 3 – Aerobic Zone: (70% - 80%) of your Max HR 4. Zone 4 – Threshold Zone: (80% - 90%) of your Max HR 5. Zone 5 – Redline zone: (90% - 100%) of your Max HR Page 24 B. Determine your fitness goal: 1. Base - individuals just starting their workout program need to build up to this level gradually. 2. Endurance 3. Strength 4. Speed 5. Power C. Based on your fitness goal, determine the specific percentage of the workout time (not including warm up and cool down) needed in each of the following heart zones to achieve your fitness goal: Base 10% healthy heart 75% temperate 15% aerobic Endurance 5% healthy heart 20% temperate 70% aerobic 5% threshold Strength 15% temperate 75% aerobic 10% threshold Speed 80% aerobic 10% threshold 10% redline Peak 75% aerobic 15% threshold 10% redline 50-60% MHR 60-70% MHR 70-80% MHR 50-60% MHR 60-70% MHR 70-80% MHR 80-90% MHR 60-70% MHR 70-80% MHR 80-90% MHR 70-80% MHR 80-90% MHR 90-100% MHR 70-80% MHR 80-90% MHR 90-100% MHR Page 25 START-UP RIDE I - 30 MINUTES Warm-up: Start with realistic goals by pacing the workout intensity to how you feel. Drink water and ease up when over exerted. Key: ® = resistance Duration Profile MHR RPE (5 minutes) 3 min. 80-95 RPM 2 min. 85-95 RPM Seated Flats Minimal ® Light ® (55-65%) 2-3 (5 minutes) XL’s/ DL – light resistance (60-70%) 3-4 Focus on smooth pedal strokes and transitions when changing leg speed: 2 min. /choose RPM Accelerate leg speed 8 counts Decelerate leg speed 8 counts 2 min. /choose RPM Accelerate 15 sec. Decelerate 15 sec. 30 sec. /choose RPM Hold accelerated steady pace 30 sec. /choose RPM Decelerate pace, easy pedaling Endurance Pacing: build heart rate up to steady state. Be specific to individual fitness level. (15 minutes) Practice with the resistance knob – add small resistance increases and then release. Notice changes in heart rate when exerting more intensity. Overall Profile: Start on flat road and establish starting resistance. Build leg speed up to 80 rpm working into the headwind. Describe pace line of riders who alternate turns riding at the front, pulling then resting by sitting in. Then, a short hill climb before the spin home. Duration 1 min. choose RPM 1 min. 70-80 RPM 1 min. 70-80 RPM 1 min. slow RPM 1 min. 80-100 RPM [5 min.] 2 min. 80-100 RPM 3 min. 60-70 RPM Profile MHR RPE Moderate resistance (70-85%) 4-6.5 Add ® try to maint. cadence Add ® try to maint. cadence Add ®/option to stand up – slow down cadence Release ® and spin easy (60-70%) 3-4 [Repeat above sequence] (70-85%) 4-6.5 Seated Flat (60-70%) 3-4 Steep Hill Climb (75-85%) 5.5-6.5 Cool Down: (2 minutes) 80-90 RPM Seated Flat Comfortable spin with light ® (55-65%) 2-3 Stretch: Option on and off the bike. (3 minutes) Stretch the muscles worked during the training. Add a few rotational torso movements to ease up any tension in the lower back or upper body. Page 26 START-UP RIDE II - 40 MINUTES Duration Profile MHR (15 minutes) 8 min. 80-110 RPM Seated Flats (55-65%) Warm-up with minimal ® Gradually increase leg speed to 110 RPM 2 min. 70-80 RPM Add small increments of ® (65%-70%) 2 min. 70-80 RPM Stand and add some ®, but (70-75%) maintain the same cadence. 3 min. 80-110 RPM Seated recovery spin (55-65%) RPE 2-3.5 3.5-4.5 2-3.5 (14 minutes) Hill Climb Focus on training strength and endurance 1 min. 65-70 RPM Standing Climb (70-75%) 4-5 Add ® and slow cadence down 1 min. 70-75 RPM Seated Climb – same ® (75-80%) 5+ Slight increase of RPM 2 min. 70-75 RPM Standing Climb (75-85%) 5.5-6 Add slight ® same cadence 2 min. steady Seated Climb (80-85%) 6–7 Keep ® and try to bring cadence back up if it slows down. 2 min. steady Standing Climb (80-85%) 6–7 Maintain intensity and speed 2 min. steady Seated Climb/ Focus on (80-85%) breathing and efficient pedal strokes. 1 min. 75-80 RPM Standing Climb/speed up (85+%) 7+ cadence, but not a major attack. 1 min. 65-75 RPM Seated Climb – ease up (85+%) 7+ slightly on cadence if necessary. 1 min. 70-80 RPM Stand Climb (85+%) 7-8+ Intensity is very strong; focus on breathing and maintaining cadence. Monitor the intensity and ease up if the heart rate feels too uncomfortable. 1 min. Seated Climb (85+%) 7-8+ Finish strong without compromising technique. (6 minutes) Downhill and Recovery Release to moderately light tension and speed up cadence: 3 min. 95-110+ RPM Seated Downhill (70-75%) 3 min. 90-95 RPM Flat road spin (65-70%) 4-5 3.5-4.5 (5 minutes) Cool Down and Stretch (50-60%) 1-2 Release tension to light resistance and gradually decrease pedal speed. 80-90 RPM Easy pedaling, then stop to stretch Recover and lower heart rate. Stretch the muscles worked during the training. Add a few rotational torso movements to ease up any tension in the lower back or upper body. Page 27 TROUBLESHOOTING No Display on Console 1. Press any key to bring the console out of sleep mode. 2. Ensure that the magnet is installed properly in the crank. 3. Ensure that the batteries are installed properly in the console and transmitter. If they are, install fresh batteries. 3. Verify that the console dip switch code matches the transmitter dip switch code (see Appendix). 4. Call our Customer Service department at 425-482-6773 for assistance. No Heart Rate signal displayed 1. Ensure that your chest strap is worn correctly, and that there is moisture under the electrodes of the chest strap. 2. Relocate the RevMaster bike away from any equipment that could potentially interrupt the radio frequency signal, such as a DVD player or television, etc. 3. Enure that there is at least 36 inches between bikes in a group exercise class setting. 4. Call our Customer Service department at 425-482-6773 for assistance. RPM or HR does not change 1. Press [CADENCE] repeatedly to toggle between instantaneous (INS), average (AVG), and maximum (MAX) values. 2. Press [HR] repeatedly to toggle between instantaneous (INS), average (AVG), and maximum (MAX) values. Page 28 TROUBLESHOOTING (CONT.) Cadence number jumps high or low 1. 2. Separate bikes that may be set to the same console code and are cross-talking, or change the console and transmitter codes on the bike (see Appendix). Relocate the bike to a different part of the room, away from any RF interfernce areas. CAUTION EXTERNAL INTERFERENCE MAY BE CAUSED BY NEARBY TELEVISIONS, STEREO EQUIPMENT, SPEAKERS, ELECTRICAL WIRE CABLING, ETC. IF YOU EXPERIENCE DISTURBANCES IN THE CONSOLE DISPLAY TRY MOVING YOUR BIKE(S) AWAY FROM POTENTIAL RF INTERFERENCE AREAS. 3. Call our Customer Service department at 425-482-6773 for assistance. Heart Rate signal gets interrupted or drops out 1. 2. 3. Ensure that there is a minimum distance of 36 inches between bikes. Verify that your chest strap is secure and that the electrodes are making contact with your chest at all times. Call our Customer Service department at 425-482-6773 for assistance. Page 29 APPENDIX Notice of FCC Compliance This equipment has been tested and found to comply with the limits for a Class C Low Power Communication Device Transmitter, pursuant to Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. There is no guarantee that interference will not occur in a particular installation. If this equipment experiences interference from a radio, television, or other RF signal, the user is encouraged to try and correct the interference by increasing the separation between the equipment and the apparatus emitting the interfering RF signal. WARNING CHANGES OR MODIFICATIONS TO EQUIPMENT NOT EXPRESSLY APPROVED BY LEMOND® FITNESS COULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT. Page 30 APPENDIX Changing the Console and Transmitter Codes The console and the transmitter have dip switches that allow you to change the transmission code back and for the between a total of 16 different number codes (00-15) to help reduce cross talking between bikes in a class environment. Cross talking is when one bike picks up the RF signal from another bike, and interferes with the displayed numbers on the console. • As long as the transmitter and console “dip” switches are set to the same number code, the two will communicate. • To change the number codes, simply flip the dip switches on each component to the same number code. The console dip switches are located in the battery compartment The transmitter dip switches are located below the battery compartment Page 31 APPENDIX Dip Switch Codes Match the code on the console to the code on the transmitter by flipping the dip switches on each unit to the corresponding up/ down sequences for the desired code as listed below. Code Number (00-15) Dip Switch Number 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 off on off on off on off on off on off on off on off on off off on on off off on on off off on on off off on on off off off off on on on on off off off off on on on on off off off off off off off off on on on on on on on on Note: • The “on” position for the console dip switches is up toward the top of the console. ON KE Console Dip Switches set to Code 11 1 2 3 4 • The “on” position for the transmitter dip switches is down toward the battery cover. Page 32 1 2 3 4 Transmitter Dip Switches set to Code 11 APPENDIX Console Codes [CADENCE] + [HR] Pressing both these keys switches from English units - Miles (Mi), Miles per hour (MPH), and pounds (Lbs); to Metric units - Kilometers (Km), kilometers per hour (KPH), and kilograms (Kg). ∧] [CADENCE] + [∧ Pressing both these keys displays the console code. Note: the console will not display the transmitter code, you must remove the belt cover and visually inspect the transmitter to see what code it is set at. ∨] [CADENCE] + [∨ Pressing both these keys displays the chest strap HR code. ∧] + [CADENCE] [STOP] + [∧ Pressing all three keys at once will light up the entire display window. Use this code to verify that the Liquid Crystal Display (LCD) screen is working properly. Page 33 Corporate Headquarters 17280 Woodinville-Redmond Rd Building B, Suite 888 Woodinville, WA 98072 Telephone: (425) 482-6773 Fax: (425) 482-6724 www.LeMondfitness.com PN: 300204 © 2004 LeMond Fitness. LeMond, RevMaster, and Pilot are registered trademarks of LeMond Fitness in the United States and other countries. Page 34
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2004:04:08 16:23:16Z Modify Date : 2004:07:26 16:12:17+08:00 Subject : Cadenec Meter Instructions 040504 Page Count : 34 Creation Date : 2004:04:08 16:23:16Z Mod Date : 2004:07:26 16:12:17+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : misp Keywords : Metadata Date : 2004:07:26 16:12:17+08:00 Creator : misp Title : Cadenec Meter Instructions 040504 Description : Cadenec Meter Instructions 040504EXIF Metadata provided by EXIF.tools