Zhejiang Dahua Vision Technology DH-IPC-GX6 CONSUMER CAMERA User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3711793
Application ID	pX7p9deY+suvj4gQMzhZ1g==
Document Description	User Manual_20180103_v1 - User manual rev 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.04kB (925449 bits)
Date Submitted	2018-01-12 00:00:00
Date Available	2018-01-12 00:00:00
Creation Date	2017-12-19 10:57:30
Producing Software	Microsoft® Word 2013
Document Lastmod	2017-12-19 10:57:30
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	Merry

Dahua Bullet Wi-Fi Camera Quick Start Guide
Dahua Bullet Wi-Fi Camera
Quick Start Guide
Version 1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Dahua Bullet Wi-Fi Camera Quick Start Guide
1 Packing List
Device ×1
QSG ×1
Screw Package ×1
Power Adapter ×1
Waterproof Connector× 1
Dahua Bullet Wi-Fi Camera Quick Start Guide
2 Product Appearance
Please refer to Figure 2-1 for device port description.
Figure 2-1
Please refer to the following table for more details about each port.
SN
Name
①
Power port
②
Network port
Table 2-1
Figure 2-2
Please refer to the following table for more details about each component.
Dahua Bullet Wi-Fi Camera Quick Start Guide
SN
Name
①
Lower cover
②
SD card slot
③
Reset/WPS
④
MIC
⑤
Indicator light
⑥
Antenna
Table 2-2
Note
For reset, long press for 8 seconds and then the light off; For WPS (Wi-Fi Protected
Setup), one quick press.
Please refer to the following table for more details about status of indicator light.
Indicator light status
Device status
Red light stably on
Booting
Green light slow flashing
Booting completed, await Wi-Fi config,
enter smart config status;
Green light quick flashing
WPS connecting (The device is trying to
connect to Wi-Fi via WPS).
Wi-Fi connection succeeded, operate
normally.
Red and green lights flash alternately
Device upgrade
Red light slow flashing
Network disconnection
Device fail to boot up; SD card does not
Red light quick flashing
work
Table 2-3
Green light stably on
Dahua Bullet Wi-Fi Camera Quick Start Guide
3 Operation by Easy4ip App
Step 1 Power on your camera with power adapter.
Step 2 Connect your smartphone to your Wi-Fi network, scan "Easy4ip" QR on the
packing box, download and install "Easy4ip" APP.
Step 3 Open Easy4ip APP (take iOS version as an example), see Figure 3-1. Please
register an account for first use.
Figure 3-1
Step 4 Please tap “+” to add new devices after you login your account.
Dahua Bullet Wi-Fi Camera Quick Start Guide
Figure 3-2
Step 5 Scan the QR code on the back of the camera to get the SN, you can also tap
"Manually enter the SN" and manually input the SN number on the next page.
Then tap "Next".
Dahua Bullet Wi-Fi Camera Quick Start Guide
Figure 3-3
Step 6 Select “Yes, go to Wi-Fi settings” and make sure your smartphone is
connected to the same Wi-Fi, then tap “Next”.
Figure 3-4
Step 7 Fill in the password of your Wi-Fi, then tap “Next”.
Dahua Bullet Wi-Fi Camera Quick Start Guide
Figure 3-5
Step 8 Input your device password, the default password is “admin”.
Figure 3-6
Step 9 Your camera is successfully added. You can set up your time zone and start
preview.
Dahua Bullet Wi-Fi Camera Quick Start Guide
Figure 3-7
Note


If you have more cameras, please follow step 4-9 to add them one by one.
If you want to change the Wi-Fi signal, please reset the camera to factory default
and repeat step 4-9 to add the device
Dahua Bullet Wi-Fi Camera Quick Start Guide
4 Device Installation
Note
Please make sure the installation surface can min support the 3X weight of the camera
and the bracket.
Step 1
Step 2
Step 3
Step 4
Figure 4-1
Dig holes on the installation surface (wall or ceiling).
Open accessories bag, take out expansion bolt and insert it into the hole you
just dug.
Open accessories bag, take out self-tapping screws. Tighten the screws to fix
the device on the installation surface (wall or ceiling).
Connect external wiring of the device properly.
10
Dahua Bullet Wi-Fi Camera Quick Start Guide
Figure 4-2
Step 5 Use cross screwdriver to loosen adjusting screw.
Step 6 Adjust the device in all possible directions, and set its monitoring direction
according to the requirements.
Step 7 Use cross screwdriver to tighten the adjusting screws.
Disclaimer





This quick start guide is for reference only. Minor difference might be found in user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
Please visit our website or contact your local service engineer for more information.
If there is any uncertainty or controversy, please refer to our final explanation
5 、FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
11
Dahua Bullet Wi-Fi Camera Quick Start Guide
Note: This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China
Postcode: 310053
Tel: +86-571-87688883
Fax: +86-571-87688815
Email: consumer@global.dahuatech.com
Website: www.dahuaconsumer.com
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : en-US
Tagged PDF                      : Yes
Title                           : F Series Indoor IP Camera Quick Start Guide
Author                          : Merry
Creator                         : Microsoft® Word 2013
Create Date                     : 2017:12:19 10:57:30+08:00
Modify Date                     : 2017:12:19 10:57:30+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools