Zhejiang Fousine Science and Technology 190713-00 RF Strip Controller User Manual LIT PAMPHLET MonsterIllumination v18cli lores

Zhejiang Fousine Science &Technology; Co.Ltd. RF Strip Controller LIT PAMPHLET MonsterIllumination v18cli lores

Contents

User Manual

3-LED STRIP KIT EXTRA LONG LED STRIP KIT 2 LED LIGHT BULB KITLARGE SPACE KIT2 LED STRIPS & 2 LIGHT BULBS 1 LED STRIP & 1 LED LIGHT BULBPerfect for big spaces like living rooms, media rooms, large bedrooms, or kitchens. bathrooms, or anywhere you want to bring your world to life with color. Everything you need to add drama to a medium to large space. Use LED strips below kitchen counters, underneath a bar, or behind your TV or desk monitor.Use this extra-long LED strip above or below cabinets, under a bar, under a bed, or in a This kit contains two LED light bulbs and is ideal for small to medium spaces like STRIP EXTENSION CABLELED Strips above a cabinet, in the ceiling, or extension power cable and adapter. SMALL SPACE KITLET’S GET STARTEDGET HELPFOR TECHNICAL SUPPORT GO TO:www.monsterstore.com/pages/contact-usOR CALL: 1 (877) 800-8989 www.youtube.com/monsterilluminessenceFor Instructional Videos:USING YOUR REMOTEPOWER OFFPOWER ON(PRESS FOR WHITE LIGHT)COLOR RING• SELECT THE COLOR OF YOUR MOODBRIGHTNESS• MAKES LIGHTS BRIGHTER OR DIMMERSPEED• MAKE LIGHTS CHANGE COLORS FASTER OR SLOWERPRESET LIGHT PROGRAMS• CHOOSE FROM EIGHT PRESET AUTO PROGRAM MODESAAA BATTERIES REQUIRED (NOT INCLUDED)GET INSPIREDSubscribe to our Pinterest boards to learn all the cool things you can do with Monster IlluminEssence. www.pinterest.com/monsterilluminessenceFor Ideas and Inspiration:Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/ TV technician for help. The Responsible (located within the United States) party information: Company Name: Monster, Inc.Address: 601 Gateway Blvd. Floor 9 Suite 900, South San Francisco, CA 94080, USA. Telephone Number: 415-840-2000Email: ProductCompliance@monstercable.comThe name and model number of the product:05064 4 7689 0 305 0 6 4 4 7 6 8 9 1 005 0 6 4 4 7 6 8 9 2 705 0 6 4 4 7 6 8 9 3 4 0 5 0 6 4 4 7 6 8 9 4 1 0 5 0 6 4 4 7 6 8 9 5 8IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONSLighted lamp is HOT!WARNING – To reduce the risk of FIRE OR INJURYCAUTION – Use indoors only.CAUTION – Risk of Electric ShockCAUTION – Hot surface. Keep away from curtains and other combustible materials.T ower and allow to cool before replacing lamp.Do not touch hot lens, guard, or enclosureKeep lamp away from materials that may burn.Do not touch the lamp at any time. damage lamp.Do not operate the luminaire with a missing or damaged shield.INSTALL LED LIGHT BULBSCOLOR RINGChoose the color of your lights. BRIGHTNESSDim from 10% - 100%.PRESET LIGHT PROGRAMSEight di erent auto programs for parties, lounging, and special occasions.CLUB 1CLUB 2LOUNGEBEACHSUNSETCHRISTMASINDEPENDENCE HALLOWEENSPEEDAdjust program speeds faster for parties and slower for an elegant change of atmosphere.EXPANDEXPAND LIGHTS AND ROOMSYou can pair up to four remotes with up to 30 Monster IlluminEssence LED strips or LED light bulbs. You can have multiple remotes control the same set of lights. You can also have di erent sets of lights paired to di erent remotes to control rooms independently.INSTALL LED STRIPSPeel 3M™ adhesive mounting and press the flexible LED strip into place.Plug the LED strip into the 5V USB controller cable(4ft) and then the cable into any USB port(TV or PC) or USB power supply (not included).Plug the LED strip into the 12V controller (0.6ft)and then the controller into the included 12V power supply (cable lenght 4ft).the included 12V power supply. 6.5-foot LED strips should only be plugged into 5V USB ports.USE ONLY WITH CLASS 2 POWER UNITINPUTTUPTUOGRBGRBINPUTTUPTUOGRBGRBModel Number190712-00190713-00190714-00190715-00Model Name6.56FT 5V RGB Strip & 5V RF Strip Controller7W RGB BulbRF 2.4GHz RemoteSAW30-120-2000U Power Supplyrm 880185Do not use if there is any damage to the light or cord insulation. Inspect periodically.THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.SAVE THESE INSTRUCTIONSPAIRINGSpeed+Speed-By default, all Monster IlluminEssence LED strips and LEDlight bulbs will be paired out of the box with the included remote control. TO PAIRTo pair LED strips or LED light bulbs to another remote, simply unplug and replug back in the LED strip or lamp to power and WITHIN FIVE SECONDS of plugging back into power, press and hold the “Speed+” until the lights blink three times. TO UNPAIR Repeat above but instead of “Speed+” press “Speed-”.914.4 mm178 mm914.4 mm178 mmDo not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteriesBattery Warning StatementDo not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries

Navigation menu