Zhejiang Fousine Science and Technology BWA17WI015 Wireless Charging Stand User Manual BWA17WI015 Wireless Charging Stand V1 0

Zhejiang Fousine Science &Technology; Co.Ltd. Wireless Charging Stand BWA17WI015 Wireless Charging Stand V1 0

User Manual

WirelessCharging StandPRODUCT GUIDEModel: BWA17WI015TMThanks for choosing us！This is a smart phone wireless charger that allows you enjoy thefun of digital products easily.Please kindly read the user manual before using and keep it forfuture reference.Built-in 2 coils to make sure largerhigh-eciency charging position.LED light clearly show the standbyand charging condition.Connect to Power AdapterConnect to Laptop for ChargingConnect to Desktop for ChargingCharging ModePowerAdapterUSB CableMicro USB PortNote: Charging pad controled by smart chips, long-term tandby can be assured.1.Connect the USB 2.0 interface into lap top USB port, the other Micro USB to pad.2.Standby LED light turn on blue.1. Connect the USB 2.0 interface into desktop motherboard USB port, the other Micro USB to pad.2.Standby LED light turn on blue.1. Make sure the charging pad indicator light turn on green, under standby status2. Put wireless charging mobile phone on the pad, the LED light will turn to green from blue and start charging. lt shows that the charging position is improper when the LED light ashing. Please move the phone a little and LED light keeps green.LED Indicator LightLED Indicator LightV1.01.Connect the power adapter to socket.2.Connect adapter to the USB2.0 interface, the other Micro USB to pad.
SpecicationInput: DC5.0V,2.0A/DC9.0V,1.8AOutput: DC5.0V,1.0A/DC9.0V,1.1AFrenquency: 110-205KHz Conversion: ≥72%Size: 118x70x87.5mm NW: 150g Trouble shooting 1.Wireless charging terminal bad2.Power cable current less than 1.5A3.Adapter current less than 1A4.Adapter, power cable, product poor contact5.Mobile location shift Notes: 1. Do not squeeze or collisions. 2. Do not disassemble or throw into re or water, to avoid causing a shot circuit leakage.3. Do not use wireless charger in severely hot, humid or corrosive environments to avoid circuit damage and occursleakage phenomenon.4. Do not place too close with magnetic stripe or chip card(ID card, bank cards etc.)to avoid magnetic failure.5. Please keep the distance at least 20cm betweem implantable medical devices(pacemakers, implantable cochlear, etc.)and the wireless charger, to avoid potential interference with the medical device6. To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.7. When work radios and products close contact, will produce interference, when product interference, please increase the distance between the product and radio.8. When don’t use the product, pease turn o the power supply and unplug the power plug.9. Before clean this product. please cut o the power supply. please only used dry rag to clean the product.10.If the damage caused by improper use of the body, the odd smell, smoke andother phenomena, please stop using immediately. Changes or modications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equopment.The involved images are sketch maps, the nal product as perthe material subjects. Includes: Wireless Charger x1pcMicro USB cable x1pcUser’s Manual x1pcNo power adapter, if you need, please purchase separately.Compatible devices: SAMSUNG® Note5/S6/S6 Edge/S6 Edge+/S7/S7 Edge/S7 Edge+/S6 NOTE/S6 DUOSLG® D1/LG LTE2/OPtimus F5/G2(USA)/G3(four contacts after the shell)/G PRO OPtimus Vu3/LTE2NOKIA® Lumia 820/Lumia 1020/Lumia 1520/Lumia 920/Lumia 822/Lumia 930 Lumia 929/Lumia 928HTC® 8x/HTC Buttery(USA)/lncredible4G LTE/Droid DNA/Rzound/One mini2 One M8 Eye(M8Et/TD-LTE 4G)/One E9(E9t/TD-LTE 4G)/HTC Buttery3(TD-LTE 4G)ASUS® Z97-DELUXE/PADPHONES-XGoogle® Nexus2/Nexus3/Nexus4/Nexus5/Nexus6/Nexus7MOTO® Motorola 260/Droid Turbo 2 (XT1585)/XPRO/MAXX(XT1254) Nexus 6(XT1100/XT1103)/Droid Turbo (XT1254)/Droid MAXX2 (XT1080)SONY® Z3V/Z4V BLACKBERRY® PRIV(STV100-1)/PRIV(STV100-2)/Z30SHARP® SH-07D/SH-04D/SH-02D/SH-13CFederal Communication CommissionInterference Statement - “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) thisdevice must accept any interference received, includinginterference that may cause undesired operation.”- “Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”- “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:■ Reorient or relocate the receiving antenna.■ Increase the separation between the equipment and receiver.■ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.”Wal-Mart Stores,Inc.,Bentonville, AR 72716Hotline: 1-800-925-6278CAUTION： To reduce the likelihood of excessive heat and possible damage, use only the USB cable packaged with this product.

Navigation menu