Zhejiang Fousine Science and Technology ONB18WI706 Wireless Charging Stand User Manual WMUS BWA17WI015 5W Wireless Charging Stand V1 0 21
Zhejiang Fousine Science &Technology; Co.Ltd. Wireless Charging Stand WMUS BWA17WI015 5W Wireless Charging Stand V1 0 21
Users Manual
Power
Adapter
USB Cable
Micro USB Port
LED Indicator Light
LED Indicator Light
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
Please read the user manual before using the product,
and keep for future reference.
1.Connect USB cable between USB port on laptop
and charging stand
2. Standby light will turn blue
Two Built-In Coils for a
larger, and more efficient
charging position
LED light shows the
standby and charging
modes
1. Connect USB cable between a USB port on the desktop
computer and charging stand
2. Standby light will turn blue
1. Make sure that the charging stand is in standby which is
indicated with a Blue light
2. Place the wireless charging enabled mobile phone on
the stand pad. The status LED will light green to show its
charging. If the LED flashes reposition the phone until
the LED continuously lights green
PRODUCT GUIDE
Model: ONB18WI706
WIRELESS
CHARGING STAND
Using with a Desktop Computer (Not Supplied)
Charging Mode
Using with a Laptop computer (Not Supplied)
Using with a Power Adaptor (Not Supplied)
1. Connect USB cable between
Power Adaptor and
Charging stand
2. Connect power adaptor to
mains socket
3. Standby light will turn blue
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
Ver.1.0 Rev.06/09/18
IPHONE® IPHONE8/IPHONE8PLUS/IPHONEX
SAMSUNG® NOTE 5/NOTE EDGE/S6/S6 EDGE/S6 EDGE+/S6 NOTE
S6 DUOS/S6 ACTIVE/S7/S7+/S8/S8+/Note8/S9/S9+
NOKIA® 822/930/830/735/920/820/929/1020/928/1520
HTC® HTC DROID DNA USA (VERIZON VERSION)/Incredible 4G LTE
HTC 8X USA(VERIZON VERSION)/ONE MINI 2
ONE M8 EYE (M8ET/MOBILE 4G)
ONE E9 (E9T/MOBILE 4G)/BUTTERFLY 3(MOBILE 4G)
Google® NEXUS4/NEXUS5/NEXUS6/NEXUS7
LG® G2/G3/G4/G5/G6/LTE2/DIL
SHARP® SH-07D/SH-04D/SH-02D/SH-13C
SONY® Z3V/Z4V
ASUS® Z97-DELUXE/PADPHONES/X
MOTO® MOTO360/MOTOX-PRO/MNINI/DROID5
YOTA® YOTA PHONE2
VEB® V3
GEAK® GEAK MARS
HUAWEI® W3
FONEE F1
XIAOLAJIAO6(LA6/MOBILE4G)
EJIAYU G6
MLAIS MX69W
HIKE X1
To reduce the likelihood of excessive heat and possible damage,
only use the USB cable packaged with this product.
Specification
Poor/Slow charging
1. For best results use a power adaptor that can supply a minimum
of 5V@2.0A
2. USB cable too thin to support current
3. Phone not correctly located on charging pad
4. If charging with computer USB outlets make sure that they supply
sufficient current and voltage otherwise slow charging might
be experienced
5. Phone case is causing obstruction for charging
6. Distance between charging plate and phone is not optimal
Includes
Compatible devices
CAUTION
Input: DC5.0V, 2.0A
Output: DC5.0V, 1.0A (5W)
Frenquency: 110-205KHz Conversion: 72%
Size: 118x70x87.5mm NW: 150g
Notes:
Wireless Charger x1 pc
Micro USB Cable x1 pc
User’s Manual x1 pc
1. Do not subject to drops, impacts or physical damage
2. Do not disassemble. No user serviceable parts inside
3. Do not use in severely hot, humid or corrosive environments
4. Keep magnetic media, bankcards, cassettes, ID cards,
Passports etc at least 20cm away from the charging stand
5. KEEP MEDICAL DEVICES AT LEAST 20CM AWAY FROM THE
CHARGING STAND.This includes Pacemakers, Implantable
Cochlear devices etc.
6. This is not a TOY
7. If interference is experienced on reception equipment please
increase distance from charging stand
8. If the product is not being used, disconnect and store safely
9. Clean product with a dry cloth only and unplug before
commencing
10. If there are signs of damage or malfunction , unplug charging
stand and seek advice
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment
This is not a complete list of devices
This equipment has been tested and found to comply with the
limits for a WPC device, pursuant to Part 18 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
CAUTION:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the product.
NOTE:
This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 18 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission
Interference Statement