Zhongnantong Electronics CS918 TV BOX User Manual CS918 Manual

Download:
Mirror Download [FCC.gov]
Document ID	3019090
Application ID	EF9m1Ps62aIMKQ+/F7q/6g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	131.36kB (1642053 bits)
Date Submitted	2016-06-06 00:00:00
Date Available	2016-06-06 00:00:00
Creation Date	2016-05-27 15:56:12
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-05-27 15:56:12
Document Title	Microsoft Word - CS918 Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jade

Smart Media Player
Product Manual
Notice:
1. Thank you for choosing our product, this manual contains important security and the proper
use of the product information to avoid the accidents and be sure to read the manual
carefully before using the product.
2. Please don’t place the product in high temperature, humidity or dust position.
3. Avoid falling or strongly impact the product.
4. Please don’t disconnect the junction when the device in a format or upload or download
suddenly, otherwise the program may get an error.
5. Do not remove the product on their own, do not use alcohol, thinner or benzene products.
6. The company reserves the right to improve our products, product specifications and design is
subject to change without prior notice.
7. Disclaimer stated: the company is only responsible for service and repairmen of the product
itself, the company is not responsible for products from data loss and joint responsibility in
the process of using the product.
8. The machine is not water resistant.
9. Pictures listed in the operations manual are for reference only.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
1. arking list
Number
Name
Quantity
SMART TV BOX
HDMI CABLE
POWER ADAPTER
AV cable
optional
INFRARED REMOTE CONTROLLER
USER MAUNAL
GIFTBOX
2. BUTTON AND USB INTRODUCE
Name
Description
DC+5V
The power supply interface, please use the original power adapter.
AV OUT
AV output interface，through the interface , output the AV to the TV or monitor
screen by AV cable(1to3).
MICRO USB
Used upgrade, also Support OTG
HDMI
HDMI，through the interface, output the AV to the TV or monitor screen.
SPDIF
Optical audio output.
LAN port
Standard RJ45 interface, can access network line cable to realize the wired
Internet function.
USB HOST
2.4GHZ and USB devices can be connected.
TF CARD
SLOT
extrapolate T‐FLASH memory card
THE POWER
KEY
Used to switch, standby
INFRARED
HEAD
Infrared remote control receiver
RECOVERY
Used to enter the recover system during the upgrade
3. HOW TO USE
3.1 Connection and turn on Unit.
Take a HDMI output for example, just use the video cable to show the picture by connecting
the three ports of AV,R,L if use the AV.
3.1.1 Connect the power and the HDMI cable: HDMI port connect to the TV and other display
devices by HDMI port, DC+5V interface using the original power adapter (5V2A).
3.1.2 Power on: long press the power button until the LED lit.
3.1.3 Switch the TV signal path: Choose the HDMI channel for the connection when using the
TV remote (General there is Signal source button on the remote control). (Note: In general,
there are several export on the TV HDMI, please choose the corresponding interface to
display the picture; choose the AV channel if connect the AV.)
Attachment: The fuselage power lamp button description;
After turn on the power or working state: always had the lights on the power supply;
Standby : Press the fuselage power button and remote power button, LED lights lits when the
media tray starting up.
On startup: Long press the power key until the power button is off the fuselage, then the box
enter a shutdown state.
3.2 Enter the main interface
The power information will appear on the device after accessing the power and starting up,
enter the main interface sometime later.
Click on the Applications Section of the Application List will display all of the application.
3.3 The return key. The main interface key. Daemon key. Reducing the volume keys.
Increase the volume keys. The standby key. Hide the status bar button.
The return Key: any interface click on the icon, you can return at the next higher
level direction.
The main interface Key: any interface click on the icon, you can return to the initial
home page.
Daemon key: click on the icon to see more background programs in case the task
runs.
Increase the volume key: click to increase the volume.
Hide the status bar button: click on the status bar button to hide, the status bar will
pop when minimum drag the bottom.
3.4 Status bar
At the bottom right of the screen, displays the main screen, T‐flash card, time, wi‐fi,
download the software and so on
When you click on the status bar, hidden menu will pop up.
Click on the button behind each column
, more options will appear.
4. SETTING
4.1.Wi‐Fi connection
Enter the setting, →wifi, click on the wireless hotspot that need to connect, enter the password
that the wireless router set up, can be connected to the internet.
4.2.Ethernet Setting
4.2.1 accessing the network cable at lan port of the device.
4.2.2 enter the device→ Ethernet, choose the check box behind the “Ethernet”.
5. Smart phone as a remote control
Install a matching “remote.apk” on the cell phone ports, both of the mobile phone and the
machine connection to the same wireless router. Open the application on the mobile side, click
on the connection after the optional device ejected. (Note: This feature applies only to Android
phones currently.)
Keyboard mode to enter
click
switch to the mouse mode
click
switch to the touch mode
click
switch to keyboard input
click
Performing roll back feature
The remote mode operation
6. Software Installation /uninstall
6.1 Unknow source APK installation setting
Please try to use the Google market program, please install the unknown source if install the
program that Google don’t admit. Please in install→ safety → choose unknown source.
6.2 Erection procedure
Local installation:
6.2.1
6.2.2
Copy all the download APK to the U disk, Hard drive, SD cards and other
equipment, access to the media player box.
Open the “apk installer”, then click the install, see the following picture (Please
choosing according to your access storage device.)
Download the install from the Web:
Method one: Please download the application software from the Internet (The suffix name
must be APK), download all programs and click on install.(If it was downloaded by the
browser, the status bar will appear a download complete icon after the download
finished
, and then click.
Method two: You can also install other Android market, and then download the program
directly from the inside.
6.3 The uninstall program
a. Enter the install→ application program→ manage application program, then will appear a list
that have already installed.
b. Click on the icons to the uninstall software that need, remove dialog interface will appear.
c. Click on the “uninstall” to uninstall the software.
7. Watch the video
7.1 Watch local video
Enter into Media→ click
→choose the download video, open the play directly.
7.2 Online movies, TV shows, live
a. Open the browser, and enter the site to watch online TV/movie, choose the TV/movie that you
like to, click play key.
b. Install a third‐party video player software, open the software and select a video resource to
play.
8. Pictures, listen to music, surf the Internet, file management
8.1 Browse the pictures
In multimedia, click
, picture can be accessed.
8.2 Local music, listen to music online
a. Local music: in multimedia, click
, click on any song, music can be listened.
b. Online music: install third‐party music software, select the song to listen to ,click on play key.
8.3 Surf the Internet
Enter into the browser→input the site to enjoy surfing on the large screen.
New Web pages
Closes the current Web page.
8.4 File management
Enter into the resource manager, the program has powerful files management features, and it can
classify and manage the memory device files, SD cards, USB devices, you can copy, cut, delete,
rename the file.
9. Language setting
9.1 Switch languages
Enter into the install→Language and input methods, Please choose the language in different
district; The user can install the input method software that you like, and choose in this position.
9.2 Switch the input method
When you need to input content, you can set the input method you need, you can click on any of
the input box, and then click the keyboard tab in the lower right status bar. It will appear different
input method that have already installed and then you can choose.
10. DLNA、IR remote control
10.1 DLNA
Machine to machine in the same local area network(connection with a wireless router); install
the Mobile phones‐side, and open the Tencent video, PPTV etc. to support the video software of
DLNA agreement, play any video, in the play interface point→
click
, then
10.2 Infrared remote controller
Button icon
Button
definica
tion
Button function
Power
key
Switch/shut/stanby
Mute
button
Mute function
Multi-me
dia
Shorcut keys, immediate access
to video, music player, photo
viewer.
TV
TV shortcut, right into the TV
Column.
browser
Browser shortcut, right into
the browser.
Applicat
ion
funtion
Enter
list.
into
the
application
Mouse
key
FF-/CH
UP
Play the previous file:press
this key to swith to the
previous show when playing.
FF+/CH
DOWN
Play the nest file:press this
key to swith to the nest show
when playing.
install
Install shorcut key
The main
interfac
e key
Back to the main interface.
Reture
key
Back to the last page or action.
Directio
n key
Up, down, left and right action
Enther
key
Mouse models for the left mouse
button
functionality,
navigation mode to enter
confirmation function.
Reduce
the
volume
key
Reduce the volume
Increase
the
volume
key
Increase the volume
CH+
Play last channel:press the key
to switch to the previous show
when palying.
CH-
Play nest channel:press the key
to switch to the nest show when
palying.
Menu key
Pop-up options memu
0～9/ABC
Number/letter
key
number/letter/punctuation
marks.
：
Ctrl
shift
Switch
number/capitalization/lower-c
ase/T9input method
Delete
key
Delete the
entered.
last
character
11. Problem solution
11.1 Question：How to do when the screen went black, splash or screen display is not normal?
Answer：To check whether the TV is started up, or switch to the corresponding port. If use
the HDMI output, TV set to HDMI 2 port should be switch to the TV second port. And
then to ensure that the HDMI cable interface is correct.
11.2 Question：Connected to the wireless router but can’t surf the Internet.
Answer: Please check whether the connected wireless router can surf or not.
11.3 Question: Network on demand, broadcast is jammed or can’t play smoothly.
Answer: It has something to do with the internet speed; you’d better take a broadband to enjoy
alone.
11.4 Question: AV input without a sound.
Answer: please check whether the volume is in a quiet place, the TV volume is open, video
content on the computer can play or not. Please ensure that the red white audio line is
plugged into audio input of AV input set in TV.
11.5 Question: Cannot find the SD card and U dick multimedia files.
Answer: Please check whether connection with the relevant install.
11.6 Question: The screen stops in the boot screen and can’t move.
Answer: This situation generally due to the machine crashed, if the remote control doesn’t
work at this time; switch off the power to restart.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jade
Create Date                     : 2016:05:27 15:56:12+08:00
Modify Date                     : 2016:05:27 15:56:12+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - CS918 Manual
Creator                         : jade
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Document ID                     : uuid:e00faac2-5e02-4c3a-a573-1f74d07d2cfe
Instance ID                     : uuid:45155e86-858e-49d8-9f8c-1b0334447a76
Page Count                      : 14

EXIF Metadata provided by EXIF.tools