Zhongshan City Richsound Electronic TB236DSW 2.0 CH Soundbar, 2.1 CH Soundbar with Wire Subwoofer User Manual manual

Zhongshan City Richsound Electronic Industrial Ltd. 2.0 CH Soundbar, 2.1 CH Soundbar with Wire Subwoofer manual

User Manual

ContentsImportant Safety Instructions .............................................................................................1Safety .......................................................................................................................................................................................1Warning ..................................................................................................................................................................................2What’s in the Box ...................................................................................................................4Identifying the Parts .............................................................................................................5Main Unit ...............................................................................................................................................................................5Wire Subwoofer...................................................................................................................................................................5Remote Control ...................................................................................................................................................................6Preparations ..........................................................................................................................6Prepare the Remote Control ...........................................................................................................................................6Replace the Remote Control Battery ...........................................................................................................................6Placement and Mounting ................................................................................................................................................7Wall Mounting (if using option-B) ................................................................................................................................7Connections ...........................................................................................................................8Use the OPTICAL Socket ...................................................................................................................................................8Use the COAXIAL Socket ..................................................................................................................................................8Use the AUX Socket ............................................................................................................................................................8Connect Power .....................................................................................................................................................................9Pairing the Wireless Subwoofer with the Main Unit ..........................................................9Automatic pairing ...............................................................................................................................................................9Manual pairing .....................................................................................................................................................................9Basic Operation ...................................................................................................................10Standby/ON ....................................................................................................................................................................... 10Select Modes .....................................................................................................................................................................10djust the Volume .............................................................................................................................................................. 10Select a Preset Sound Effect ........................................................................................................................................10AUX/OPTICAL/COAXIAL Operation ...................................................................................10Bluetooth Operation ...........................................................................................................11Pair Bluetooth-enabled Devices ................................................................................................................................. 11Listen to Music from Bluetooth Device ................................................................................................................... 11USB Operation .....................................................................................................................12Troubleshooting ..................................................................................................................12Specifications ......................................................................................................................13
- 1 -The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Safety1 Read these instructions – All the safety and operating instructions should be read before this product is operated. 2 Keep these instructions – The safety and operating instructions should be retained for future reference. 3 Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow all instructions – All operating and usage instructions should be followed. 5 Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool and the like.6 Clean only with a dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus 9. Do not defeat the safety purpose of thepolarized or grounding plug. A polarizedplug has two blades with one wider thanthe other. A grounding plug has two bladesand a third grounding prong. The wide blade or the third prong is provided for into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. by the manufacturer.12 Use only with the cart, stand, !by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug the apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.15 This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.16 The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.17 Minimum distance around the apparatus for sufficient ventilation is 5cm.18 The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,table-cloths, curtains, etc…19 No naked flame sources, such as lighted candles, should be placed on the apparatus.20 Batteries should be recycled or disposed of as per state and local guidelines.21 The use of apparatus in moderate climates.Important Safety InstructionsCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.RISK OF ELECTRIC SHOCK DO NOT OPEN
- 2 -• Caution:- Use of controls or adjustments or performance of procedures other thanthose described herein, may result inhazardous radiation exposure or otherunsafe operation.- To reduce the risk of fire or electric shock, do not expose this apparatus to rain ormoisture. The apparatus must not beexposed to dripping or splashing andobjects filled with liquids, such as vases,must not be placed on apparatus.- The mains plug/appliance coupler is used as the disconnect device, the disconnectdevice must remain readily operable.- Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type.Warning• The battery (batteries or battery pack) shallnot be exposed to excessive heat such as sunshine, fire or the like.• Before operating this system, check thevoltage of this system to see if it is identical to the voltage of your local power supply.• Do not place this unit close to strongmagnetic fields.• Do not place this unit on the amplifier orreceiver.• Do not place this unit close to damp areasas the moisture will affect the life of the laser head.• If any solid object or liquid falls into thesystem, unplug the system and have it checked by qualified personnel before operating it any further.• Do not attempt to clean the unit withchemical solvents as this may damage the finish. Use a clean, dry or slightly damp cloth.• When removing the power plug from thewall outlet, always pull directly on the plug, never yank on the cord.• Changes or modifications to this unit notexpressly approved by the party responsible for compliance will void the user’s authority to operate the equipment.• The rating label is pasted on the bottom orback of the equipment.• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.DO NOT INGEST BATTERY,CHEMICAL BURN HAZARDThe remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.We hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. We are the licensee to use such marks. Other trademarks and trade names are those of their respective owners.Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
- 3 -For U.S. modelsFCC InformationWarning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”NOTE:•This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.• However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio / TV technician for help.• This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • IC Notice:This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.CAN ICES-3 (B) / NMB-3 (B)Avis d’Industrie CanadaLe présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes: (1) I'appareil ne doit pas produire de brouillage, et (2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil.
7GBProduct OverviewMain UnitFront View1. ButtonSwitch the unit between On and Standby mode.2. SOURCE ButtonSelect the input source. 3. MUTE buttonMute or resume the sound.4. VOL – / + ButtonAdjust the volume. 5. Remote Control SensorReceive signal from the remote control.6. STANDBY IndicatorIn STANDBY mode: Light up Red. 7. AUX 1 / AUX 2 IndicatorIn AUX 1 mode: Light up Green.In AUX 2 mode: Flash in Green.8. OPTICAL IndicatorIn OPTICAL mode: Light up Orange.9. HDMI '6/$5*0/ IndicatorIn HDMI ARC mode: Light up White.5123 4678 91. SUBWOOFER OUT Socket2. AC~SocketConnect a power cord.3. OPTICAL (TV/BD/DVD) SocketConnect to an external audio device.4. SERVICE ONLY SocketThe USB socket is for service only. It is not designed to charge smartphones, tablets or similar devices.5. AUX 1 (BD/DVD) SocketConnect to an external audio device.6. AUX 2 (BD/DVD) SocketConnect to an external audio device.7. HDMI Socket8. Wall Bracket ScrewsRear View18 823 4 756TH-D337H_IB_170505_will.indd 7 5/5/2017 4:19 PM
8GB Subwoofer1. ButtonSwitch the unit between On and Standby mode.2. DEFAULT ButtonPress to resume the default sound eect setting.3. VOL + / – ButtonsAdjust the volume.4. BASS – / + ButtonsAdjust the bass sound level.5. MUTE ButtonMute the unit or resume the sound.6. TREBLE – / + ButtonsAdjust the treble sound level. 7. AUX 1/ 2 ButtonSwitch between AUX 1 / AUX 2mode.8. HDMI ARC ButtonPress to switch to HDMI ARC mode.9. OPTICAL ButtonPress to switch to OPTICAL mode.Remote Control138479526TH-D337H_IB_170505_will.indd 8 5/5/2017 4:19 PM
9GBRemote Control Operation Ranget The remote control sensor on the front unit is sensitive to the remote control’s commands up to a maximum of 6 metres away and within a maximum of a 60° arc.t Please note that the operating distance may vary depending on the brightness of the room.3. Slide the tray back into the remote control. There will be a click once it is back in place.Handling the Batteryt Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re, personal injury or damage to property.t Only use the battery type indicated in this manual.t Do not install new batteries with used ones and do not mix dierent types of batteries.t Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.Handling the Remote Controlt Do not drop the remote control.t Do not allow anything to impact the remote control.t Do not spill water or any liquid on the remote control.t Do not place the remote control on a wet object.t Do not place the remote control under direct sunlight or near sources of excessive heat.t Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and / or property damage, and / or re.t When the battery is exhausted, the remote control will not function. PreparationFirst-time Use of Remote ControlThe unit has a pre-installed lithium CR2025 battery.Remove the protective tab to activate the remote control battery.Battery Replacement for the Remote Control1. Gently push the tab of the battery tray in and slide it free from the remote control.2. Replace with a new CR2025 battery.30° 30°Max. 6 mTH-D337H_IB_170505_will.indd 9 5/5/2017 4:19 PM
10GB Wall Mountingt Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe personal injury and property damage (if you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to verify that the wall will safely support the total load of the soundbar.t Additional tools (not included) are required for the installation.t Do not overtighten screws.t Keep this instruction manual for future reference.t Use an electronic stud nder to check the wall type before drilling and mounting.1. Remove the screws from the main unit.764 mmWall (Front view)3. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance between the holes should be 764 mm.2. Attach the wall brackets to the main unit with the screws removed from the main unit. TH-D337H_IB_170505_will.indd 10 5/5/2017 4:19 PM
11GB5. Insert 1 screw (included) into each dowel. Be sure to leave a 5 mm gap between the wall and the screw’s head. Lift the unit over the heads of the screws and slot into place.4. Firmly x 1 dowel (included) into each hole in the wall if necessary.DowelSolid wall (i.e., Solid brick, Solid concrete, Solid wood, Solid wooden battens)Drywall, Plaster wall, Lath wall, etc.5 mm25-30 mmTH-D337H_IB_170505_will.indd 11 5/5/2017 4:19 PM
12GB Speakers PlacementSUBWOOFERSOUNDBARSoundbarSoundbar carries most of the dialogue as well as music and eects.t If your TV is placed on a table, you can place the soundbar on the table directly in front of the TV stand, centred with the TV screen.t If your TV is attached to a wall, you can mount the soundbar on the wall directly below the TV screen.SubwooferA subwoofer is designed to reproduce powerful low bass eects (explosions, the rumble of spaceships, etc.).t The performance of a subwoofer is directly related to its placement in the listening room. Experiment with placement before choosing a nal location for your subwoofer. Find the location where the bass performance is best.t The subwoofer should be within 5 metres of the soundbar in an open area (the closer the better).t Do not put anything on the top of the subwoofer.TH-D337H_IB_170505_will.indd 12 5/5/2017 4:19 PM
13GBConnectionsMethod 1: Optical ConnectionUse an optical cable (not included) to connect the soundbar’s OPTICAL socket to the OPTICAL OUT socket of the external device. The simplest option is to connect your soundbar directly to your TV. If you connect the soundbar to another external device (e.g. Blu-Ray player), you will hear the sound from that device through the soundbar.1. After connection, press button on the unit or remote control to switch the unit on.2. Press SOURCE on the unit or OPTICAL on the remote control to select OPTICAL to play audio from your input device.This section involves various methods of connecting the product to other external components. Ensure all audio connections of the unit are connected before connecting to the mains power socket. The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical input.12TVRear View of the SoundbarBlu-ray Player / DVD Player / RecorderSet-top BoxSatellite ReceiverGame ConsoleVideo CameraOptical cable (not included)TH-D337H_IB_170505_will.indd 13 5/5/2017 4:19 PM
14GB Method 2: HDMI Hub Connectiont Ensure HDMI cables that can support the ARC function are used.t HDMI-CEC will be called dierent names by dierent manufacturers – please refer to your owner’s manual for details on setting up HDMI-CEC and ARC.t While using a HDMI cable for ARC function, CEC (Consumer Electronics Control) provides interoperability between the unit and various devices (e.g. TV). However, this unit is not guaranteed to fully operate with all HDMI-CEC enabled devices. This is NOT a defect.Using Your TV as a HubThe ARC (Audio Return Channel) function allows sound to travel to and from your ARC-compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC function, please ensure that your TV is both HDMI-CEC and ARC compliant and set up accordingly. When correctly set up, the CEC feature allows you to adjust the volume output (VOL +/– and MUTE) of the soundbar with the TV remote control. When you switch your TV on/o with your remote control, your soundbar will also be switched on/o. Be patient that it might take a few seconds for your TV to tell your soundbar to switch on or o.Use this method to connect all your devices into your TV.1. Connect an HDMI cable (not included) from your soundbar’s HDMI ARC (TV) socket to the HDMI (ARC) socket on your ARC-compliant TV.2. After connection, press button on the unit or remote control to switch the unit on.3. Press SOURCE on the unit or HDMI ARC on the remote control to select HDMI ARC mode to play audio from your input device.Rear View of the SoundbarTV Blu-ray Player / DVD Player / RecorderSet-top Box Satellite ReceiverGame ConsoleVideo CameraHDMI Cable (not included)The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with HDMI input.TH-D337H_IB_170505_will.indd 14 5/5/2017 4:19 PM
15GBEnsure the colours on the cable plugs match with the colours on the input and output sockets.Method 3: AUX Connection1. Use a 3.5 mm to RCA stereo audio cable (not included) or a 3.5 mm to 3.5 mm stereo audio cable (included) to connect the soundbar’s AUX 1/ AUX 2 socket to the AUDIO OUT /HEADPHONES sockets of the external device. 2. After connection, press button on the unit or remote control to switch the unit on.3. Press SOURCE on the unit or AUX 1 / AUX 2 on the remote control repeatedly to select AUX 1 / AUX 2 to play audio from your input device.Rear View of the SoundbarBlu-ray Player / DVD Player / RecorderSet-top BoxSatellite ReceiverGame ConsoleVideo CameraMP3 Player or Mobile DeviceOR 3.5 mm to 3.5 mm Stereo Audio Cable (included)3.5 mm to RCA Stereo Audio Cable (not included)TH-D337H_IB_170505_will.indd 15 5/5/2017 4:19 PM
16GB Connecting the Subwoofer to the SoundbarConnect the subwoofer cable into the SUBWOOFER OUT sockect of the soundbar.t Connecting the unit to any other power source may damage the unit.t Ensure all audio connections of the unit are connected before connecting to the mains power socket.t Make sure the mains plug is rmly inserted into the mains socket.t To switch the unit o completely, remove the mains plug from the mains socket.t Please turn the unit o completely to save energy when not in use.t The mains cable are designed for this JVC soundbar only. DO NOT use the mains cable for other purposes.Connecting to the Mains SupplyThe soundbar is designed to operate with the supplied mains cable.SoundbarUnwind the mains cable to its full length. Connect the end of the cable to the AC~ Socket at the rear of the unit and then connect the mains plug to the mains socket. Make sure the mains plug is fully inserted into the mains socket.To the mains socketRear View of the SoundbarFront View of the SubwooferRear View of the SoundbarTH-D337H_IB_170505_will.indd 16 5/5/2017 4:19 PM
17GBGeneral OperationStandby / ONWhen you rst connect the unit to the mains socket, the unit will be in Standby mode.t Press on the unit or on the remote control to switch the unit on. t Press on the unit or on the remote control again to switch the unit back to Standbymode. The Power Indicator will light up red.Automatic Power O FunctionThe unit automatically turns to Standby mode after about 15 minutes if the TV or the external unit is disconnected, switched o or the volume is too close to mute.t To switch the unit o completely, remove the mains plug from the mains socket.t Please turn the unit o completely to save energy when not in use.Adjusting the Speaker Level Settings and EectsAdjusting the Volumet Press VOL + / – to adjust the volume.t If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again, or press VOL + / – on the unit or on the remote control to resume normal listening.Adjusting the Bass Volume LevelPress BASS + / – repeatedly to adjust the bass volume level.Adjusting the Treble Volume LevelPress TREBLE + / – repeatedly to adjust the treble volume level.Selecting ModesPress SOURCE on the unit repeatedly to select between AUX 1, AUX 2, OPTICAL, and HDMI ARC mode.Alternatively, t press AUX 1/ AUX 2 on the remote control to select AUX 1 and AUX 2 mode.t press OPTICAL on the remote control to select OPTICAL mode.t press HDMI ARC on the remote control to select HDMI ARC mode.TH-D337H_IB_170505_will.indd 17 5/5/2017 4:19 PM
18GB AUX / Optical / HDMI OperationThere are OPTICAL / AUX 1 / AUX 2 and HDMI ARC sockets located at the rear of the unit.1. Before connecting to the mains socket, ensure all the connections are completed.2. While in the On mode, press SOURCE on the unit repeatedly to select between AUX 1, AUX 2, OPTICAL, and HDMI ARC mode.Alternatively, t press AUX 1/ AUX 2 on the remote control to select AUX 1 and AUX 2 mode.t press OPTICAL on the remote control to select OPTICAL mode.t press HDMI ARC on the remote control to select HDMI ARC mode.3. Operate your audio device directly for playback features.While in OPTICAL/HDMI ARC mode, if there’s no sound output from the unit, ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with OPTICAL/HDMI input.TH-D337H_IB_170505_will.indd 18 5/5/2017 4:19 PM
19GBMaintenanceEnsure the unit is fully unplugged from the mains socket before cleaning.t To clean the units, wipe the case with a slightly moist, lint-free cloth.t Do not use any cleaning uids containing alcohol, ammonia or abrasives.t Do not spray aerosol at or near the unit.Hints and TipsIf a problem does occur, it may often be due to something very minor. The following table contains various tips. If you require additional assistance please click on the link for Support Centre: Norway: www.elkjop.no/service Sweden: www.elgiganten.se/service Denmark: www.elgiganten.dk/service Finland: www.gigantti./huoltoProblem SolutionNo power. t Ensure the mains plug is connected.t Make sure that you select the On mode.The remote control does not function.t Use the remote control near the unit.t Point the remote control at the remote sensor on the unit.t Replace the battery in the remote control with a new one.t Remove any obstacles between the remote control and the unit.Loud hum or noise is heard.t The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with alcohol.No sound from the soundbar and subwoofer.Please try either one of the solutions below:t Make sure that the unit is not muted. Press MUTE or VOL +/– button to resume normal listening.t Press on the unit or on the remote control to switch the soundbar to standby mode. Then press the button again to switch the soundbar on.t Unplug the soundbar from the mains socket, then plug it in again. Switch on the soundbar.t Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM mode while using digital (e.g. HDMI, OPTICAL) connection.t The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect.The unit does not respond when pressing any buttons.t The unit may freeze up during use. Switch the unit o and then on again at the mains socket to reset the unit.TH-D337H_IB_170505_will.indd 19 5/5/2017 4:19 PM
- 13 -• Design and specifications are subject to change without notice.SpecificationsSound BarPower Supply ............................................................................................................................................... AC120V~ 60HzPower Consumption ...................................................................................................................................................... 30 WOutput Power ............................................................................................................................................................ 30 W x 2USB Socket ............................................................................................................................................................... 5V == 0.5AAudio input sensitivity ............................................................................................................................................... 700mVFrequency Response .................................................................................................................................. 120Hz - 20KHzUnit Dimension (W x H x D)..............................................................................................................952 x 63 x 65.7 mmSpeaker Impedance ...................................................................................................................................................."#$%BluetoothVersion .................................................................................................................................................................................. V 4.2Maximum power transmitted ..............................................................................................................................<20 dbmFrequency bands............................................................................................................................2402 MHz ~ 2480 MHzRemote ControlDistance ...................................................................................................................................................................................6mAngle .......................................................................................................................................................................................30°Battery Type ..................................................................................................................................................................CR2025

Navigation menu