Zhongshan K mate General Electronics BTC005B Bluetooth Handsfree Kit User Manual BTC005B

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Handsfree Kit BTC005B

UserManual.wiki >

Zhongshan K mate General Electronics >

BTC005B User Manual

User Manual

BTC005B Bluetooth handsfree kit  Brief introduction…………………………………………..1 1. Bluetooth wireless communication technology…………………1 2. About BTC005B……………………………………………………1  Before using………………………………………………..1 1. Overview……………………………………………………………1 2. Charging the handsfree kit……………………………………….2  Using the handsfree kit……………………………….…3 1. Switching on/off the handsfree kit…………………………….…3 2. Pairing the handsfree kit with Bluetooth mobile phone…….…3 3. Installing the handsfree kit ………………………………………4 4. Making call with the handsfree kit………………………………4 5. Bluetooth Music Receiver……………………………………… 5 6. Re-connecting with Bluetooth device……………………………5 7. Automatic switching off……………………………………………6 8. LED indicators and indication tone….……………………….…..6  Care and maintenance…………………………………….7  FAQ…………………………………………………………...7  Specification………………………………………………..8

 Before using 1. Overview 1 button—switch on/off, pairing, answer, voice dial, redial last call and microphone mute 2 button—End and reject call, pause song, resume song 3 button—Volume up, skip backward 4 button—Volume down, skip forward 5 First microphone 6 Second microphone 7 Charging port 8 Stereo Audio Line Out 9 Magnet 10 Metal fixed clip 2. Charging the handsfree kit First using—You must charge the battery fully before first using. Low power—When you hear tones of “Dong Dong Dong” every 10 seconds or see the red LED to flash twice every 10 seconds, it means that the battery is low power and need to be charged. The charging steps are as follows: Step1: Connect the charging cable to USB port; Step2: Connect the end of the charging cable to charging port of the side of the handsfree kit. When the red LED is on, it is charging. When the red LED is off, it has charged fully. It will take about 2.5 hours to charge the handsfree kit fully.

Remarks: 1. The battery will dry up if you don’t use the handsfree kit for a long time, at this time, you have to charge the handsfree kit for about 30 minutes, the LED indicator will be on. 2. Please don’t attempt to take out the battery from the handsfree kit, so as not to damaging the handsfree kit. Warning: 1. The battery is recycled. 2. Do not dispose of the battery in fire, as it may cause explosion.  Using handsfree kit 1. Switching on/off handsfree kit Function Operation LED indicator Indication voice Switch on Press button for about 3～5 seconds, and release it till blue light flashes Blue LED flashes 3 time Headset Ready Swith off Press button for about 2～3 seconds, and release it till red light flashes RED LED flashes 3 time Powering Down Enter into pairing mode Make sure the hands free kit is off, press button for about 7～8 seconds, and release it till blue LED and red LED flashes alternately blue LED and red LED flashes alternately Please pair Bluetooth phone now Remark: The pairing mode will last 2 minutes, it will switch to standby mode if exceeding 2 minites. When you have to repair it, please switch off the handsfree kit firstly, and then make it enter into pairing mode again. 2. Pairing the handsfree kit with Bluetooth mobile phone Please make sure your mobile phone has bluetooth function that is available. Specific pairing steps may vary with different mobile phones. Please refer to your mobile phone user manual for further information. The steps are as follows: 1)、Keep the handsfree kit and Bluetooth mobile phone within 1 meter when

pairing. 2)、Make the handsfree kit enter into pairing mode (refer to “Switch on/off the handsfree kit)., you will hear a voice ‘Please pair Bluetooth phone now ,enter pin code ‘0000’’ 3)、Switch on Bluetooth function of mobile phone and search the Bluetooth device. After searched, select “BTC005B” in the Bluetooth device list. 4)、According to indication, enter password or PIN No:”0000”, and press the key of ” Yes” or “confirm”. 5)、After successful pairing, select “BTC005B” in the Bluetooth device list, and press “connect”. 6)、After successful connecting, you may hear a voice ‘Connected to Bluetooth phone。’. Remark:  If the pairing is not successful, please switch off handsfree kit firstly, and then re-pair according to the step 1-6 mentioned above.  After successful pairing, the handsfree kit and mobile phone will remember each other, the handsfree kit will not need to re-pair with Bluetooth device when use next time unless the pairing information is deleted because of new pairing.  When you switch on the handsfree kit every time, it will connect with last connected devices automatically. If you want to pair it with other devices, please switch off Bluetooth function of current Bluetooth device paired with the handsfree kit firstly, and then pair the handsfree kit with new device according to steps 1～6 mentioned above. 3. Installing the hands free kit The hands free kit is suitable to use in family, office or car and so on. 1)、Using in the car First clip the metal fixed clip on the sun visor, then let magnet of back of handsfree kit adsorb groove of metal fixed clip. At last, adjust the degree of handsfree kit to make the microphone towards to user’s mouth to get the best conversation effect.

2)、Using at home/in office When you use the handsfree kit at home or in office, please take apart the handsfree kit with metal fixed clip firstly, and then put the handsfree kit on the flat and solid desk to get best conversation effect. 4. Making call with the handsfree kit Function The status of the hands free kit Operation Cancel calling Calling Short press button 1 time Answer a call Ringing When the is a incoming call, you will hear a notice ‘Call from xxxxxxx’, at this time short press button 1 time to answer the call. Reject a call Ringing Short press button 1 time End a call Conversation mode Short press button 1 time Volume up Conversation mode Short press button Volume down Conversation mode Short press button Microphone mute Conversation mode Continuous short press button 2 times, The handsfree kit sounds 2 indication tone every 5 seconds when the microphone is mute Cancel mute Conversation mode (microhone mute) Short press button 2 times Redial last call Standby mode (connected with Bluetooth device) Short press button 2 times Voice dial Standby mode (connected with Bluetooth device) Short press button 1 time Warning: Excessive pressure from earphones and headphones can cause hearing loss. Remarks:  Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user manual.  When the volume is adjusted to max or min, you will hear a indication tone.

 For some mobile phones, when you press the answer button on the phone, the conversation will be sent to the mobile phone. At this time, you may switch the call to the handsfree kit through operating on your mobile phone. Please refer to your mobile phone user manual for further information. 6.Blutooth Music Reciver When the hands free kit connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly. Before enjoy music , the hands free kit need to connect to your car stereo system or home stereo system. Function Status of headset Operation Volume up Playing music Short press ∧ key Volume down Playing music Short press ∨ key Pause Playing music Short press the Revert Pause Short press the Last song Playing music Long press ∧ key 2 seconds Next song Playing music Long press ∨ key 2 seconds Remark: OR

 For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in the “setting” of music play interface, and then choose “SBT02” in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.  Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information. 7.Re-connecting with Bluetooth device 1) Automatic connecting The handsfree kit will connect with last connected device automatically when turn on it every time. 2) Connecting manually When the handsfree kit disconnect with Bluetooth device, press button 1 time, the handsfree kit will connect with last connected device. Remarks:  The handsfree kit only try to connect with last connected device that supports HFP.  Before connecting with Bluetooth device, please switch on Bluetooth function of your Bluetooth device.  For some Bluetooth devices, take some Nokia mobile phones for example, you have to set up on mobile phone to allow automatic connecting. 8.Automatic switching off The handsfree kit will switch off automatically in order to save power, if it doesn’t connect with any devices after 10 minutes.

9.LED indicators and indication tone The status of the handsfree kit LED indicators Indication tone Charging Red LED is on Finish charging Red LED is off Pairing mode Blue and red LED flashes alternately Standby mode (not connected with Bluetooth device) Blue LED flashes 1 time every 2 seconds Standby mode (connected with Bluetooth de Blue LED flashes 2 times every 4 seconds Ringing Blue LED flashes quickly Conversation mode Blue LED is on steady Low power Red LED flashes twice every 10 seconds 2 tones every 5 seconds  Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and enjoy this product for many years.  Keep dry and don’t put it in the dump place, so as not to affecting the interior circuit of product.  Don’t put the product under the sunlight or place in the hot areas. High temperature will shorten the life of electronic device, destroy the battery, or distort certain plastic.  Don’t expose the product in the cold areas. It may damage the internal circuit board.  Don’t try to take apart the product. It may damage the product if you are not professional.  Don’t fall off on the floor or knock the hard substance. It may damage interior circuit.  Don’t use intensify chemical or detergent to clean the product.  Don’t scrap the surface with sharp things. If the product can’t work normally, please send it to the regularly asserted store. The staff will help you to solve the problem warmly.

 FAQ 1. Why is there no sound when making call with the handsfree kit? a) Please make sure the handsfree kit connect well with Bluetooth mobile phone; b) Please make sure the volume has already been adjusted to the proper position. 2. Why can not my mobile phone search and find the handsfree kit? If the handsfree kit is not in paring mode, the mobile phone can’t find the handsfree kit. Please make sure the hand free kit is in pairing mode and in the effective working range, the mobile phone can pair with the handsfree kit. 3. Why is the conversation not clear? a) Make sure the mobile phone is in the strong signal areas; b) Make sure the handsfree kit is in the effective working range. 4. How many is the effective range between the handsfree kit and the mobile phone? According to the Bluetooth standard, the max. controllable range of Class 2 handsfree kit is 10 meters. But it varies with different environment and paired mobile phone.  Specification Bluetooth version Bluetooth V2.1 Bluetooth profiles Headset, Handsfree Effective range 10m Working time Talk Up to 10 hours Music Up to 17 hours Standby time Up to 500 hours Charging input DC 5V 500mA Charging time Approx. 2.5 hours Working temperature -10～45℃ Storage temperature -20~60℃ Dimension 90*47*17mm Weight 55g

Note This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.