Zhongshan K mate General Electronics BTH002-KMA04 Bluetooth Stereo Headset User Manual BTH002 User s guide

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH002 User s guide

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH002 KMA04 User Manual

Manual

BTH002 Bluetooth stereo headset User’ guide  Brief introduction………………………………………………..…1 1. Bluetooth wireless communication technology……………….…..….1 2. About BTH002..……………………………………………………....1  Before using…………………………………………………………2 1. Overview…………………………………………………………..….2 2. Charging the headset……………………………………….............…3  How to use……………………………………………………….…..4 1. Switching on/off the headset……………………………………….....4 2. Pairing the headset with Bluetooth devices……………………….….4 How to enter pairing mode…………………………………………....4 Pairing the headset with Bluetooth mobile phone………………….…4 Pairing the headset with Bluetooth transmitter…………………….…5 Multi-pair……………………………………………………….……..6 3. Re-connecting to a Bluetooth device…………..……………………..6 4. Wearing the headset…………………………………………...……..7 5. Making calls with the headset…………..…………………………....7 6. Playing music……………………………………………………..….8 7. Restoring factory defaults and resetting……………………………..9 8. LED indicator………………………………………………...............9 9. Indication tone……………………………………………………....10  Care and maintenance…………………………………..……….10  FAQs……………………………………………………..…….……11  Specifications…………………………………………….………...12

4) Automatic connecting with the last paired device when turn on the headset. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices.  Before using 1 Overview 1) Retractable string 2) < key :last song 3) > key :next song 4) LED Indicator 5) Multifunction button (MFB):Switch on/off the headset, answer, end and reject call, microphone mute, voice dial and voice transfer, redial last number, pause and play 6) + key: volume up 7) – key: volume down 8) Charging port 9) Built-in microphone 2

2 Charging the headset First time charging Before you use this Bluetooth headset, please charge the battery of BTH002 fully. Next time When you hear three warning tones of “DONG” every 20 seconds, at the same time, the red light blinks two times. It means the battery is low power and need to be charged. There are two types of charging as below: A . Charging the battery with travel charger Step1: Plug the travel charger into standard AC power outlet. Step2: Connect the travel charger with the charging port of the headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3 hours to charge the headset fully. B. Charging the battery with USB cable Step1: Insert USB charging cable into USB port of PC. Step2: Connect charging cable with the charging port of headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3 hours to charge the headset fully. Note:Choosing travel charger or USB cable depends on different countries or areas and actual demands. Warning: 1) The battery is recycled. 2) Do not dispose of the battery in fire, as it may cause explosion. 3

 How to use 1. Switching on / off headset Function Operation LED indicator Indication tone Switch on Press the MFB button for 3-5 seconds, and release it till the blue LED is on Blue LED is on for 1 second A long “DI” tone Switch off Press the MFB button for 3-5 seconds, and release it till the red LED is on Red LED is on for 1 second A long “DI” tone Note: In order to save power, the headset will automatically switch off if no devices can be connected within 5 minutes after switching on. 2 Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicator Indication tone Enter pairing mode Make sure the headset is off. Press and hold MFB button for 7-9 seconds, and release it till the red and blue LEDS blink alternately Red and blue LEDs blink alternately. Two “DU” tones Note: The pairing mode will last 2 minutes, If the headset still can’t pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically. Pairing the headset with Bluetooth mobile phone Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows: 1) Please keep the headset and mobile phone in the range of 1 meter when pairing. 2) Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”). 4

3) Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched, select “BTH002”in the Bluetooth device list. 4) According to indication, enter password or PIN No:”0000”,and press the key of” Yes” or “confirmed”. 5) After successful pairing, select “BTH002” in the Bluetooth device list, and press “connect”. 6) After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds. Notes:  If the pairing is not successful, please switch off headset firstly, and then re-pair according to the step 1～6 mentioned above.  After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time. The headset can remember 8 paired devices, when paired devices exceed 8 paired devices, the first one will be replaced.  If you want to pair the headset with other devices, please pair it with the new device according to steps 1～6 mentioned above. Pairing the headset with Bluetooth transmitter You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter,. Here take BTT001 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows: 1) Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing. 2) Make the headset enter into pairing mode (refer to “How to enter into pairing mode). 3) Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and start pairing. 4) When the headset requests PIN No, the Bluetooth transmitter need to respond “0000” automatically. 5) After successful pairing and connecting, the blue LED of headset quickly blinks twice every 4 seconds. Notes: 1) The pairing password of BTH002 is “0000”, so, the headset can’t pair with the Bluetooth transmitter which pairing password is not “0000”. 5

Function Status of headset Operation End calling Conversation mode Short press MFB Call transfer Conversation mode Press and hold MFB for 2s, and release it till hearing indication tone Microphone mute Conversation mode Quickly press the MFB twice Cancel mute Conversation mode (mute) Quickly press the MFB twice Warning: Excessive pressure from headphones can cause hearing loss. Notes:  Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone.  Some functions and indication tones may vary with different mobile phones.  When the volume is adjusted to max or min, you will hear a indication tone.  For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information. 6 Playing music When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly. Function Status of the headset Operation Volume up Playing music Short or long press + key Volume down Playing music Short or long press - key 8

Function Status of headset Operation Pause Playing music Short press MFB Play Pausing Short press MFB Last song Playing music Short press < key Next song Playing music Short press> key Notes:  For some of mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in the “setting” of music play interface, and then choose “BTH002” in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information.  When the volume of headset is adjusted to max. or min, you will hear a indication tone.  Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information. 7 Restoring to factory defaults and resetting Make sure the headset is off, press and hold MFB and + buttons simultaneously for about 8 seconds, release them when you hear two “DU” tones and see red LED is on, now the headset restores to factory defaults, and the pairing information will be deleted. Charge the headset to make it reset. 8 LED indicator 1) Charging LED indicator Status of the headset Red LED is on Charging Red LED is off Finish charging 9

2) Pairing with the Bluetooth devices LED Indicator Status of the headset Red and blue LEDs blink alternately Pairing mode Blue LED quickly blinks once every 2 seconds. Not connected to a device Blue LED quickly blinks twice every 4 seconds Set up HFP or A2DP connection Blue LED quickly blinks three times every 2 seconds Set up HFP and A2DP connection Blue LED gradually turns on and off Conversation mode Red LED blinks twice every 20 seconds Low power 9 Indication tone Indication tone Status of headset Two tones every 3 seconds Conversation mode and microphone mute Three “DU” tones every 20 seconds Low power  Care and maintenance Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and to enjoy this product for many years.  Keep dry and don’t put it in the dump place, in case of effecting the interior circuit of product.  Don’t put the product under the sunlight or place hot areas. High temperature will short the life of electronic device, destroy the battery, or distort certain plastic.  Don’t expose the product in the cold areas. It may damage the internal circuit board.  Don’t try to take apart the product. It may damage the product if you are not professional.  Don’t fall off on the floor or knock the hard substance. It may damage interior circuit.  Don’t use intensify chemical or detergent to clean the product. 10

 Don’t scrap the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1 Why does red light blink twice every 20 seconds? Battery is low, need to be recharged. 2 Why is not the red light bright when charging? a) Please make sure the charging device connects with headset. well b) You didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red light will be bright. 3 How far is the effective rang between the headset and mobile phone? According to the Bluetooth standard, the max. controllable range of Class2 headset is 10 meters. It varies under different environment. 4 Why can not my cell phone search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode, Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5 Why can not hear the voice? a) Make sure the headset has been switched on. b) Make sure the volume is not too low or muted. c) Make sure the headset connects with the mobile phone correctly. d) Make sure the distance between the headset and the cell phone is in the normal working scope. 6 Why is the voice not clear in conversation. a) Make sure the mobile phone is in the strong signal area. b) Make sure the headset is in the function range of this product. 11