Zhongshan K mate General Electronics BTH010 BLUETOOTH STEREO HEADSET User Manual BTH010 User s manual

Zhongshan K-mate General Electronics Co., Ltd BLUETOOTH STEREO HEADSET BTH010 User s manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH010 User Manual

Users Manual

BTH010 Bluetooth stereo headset User’s manual (V1.0)

Contents  Brief introduction……………………………………….…3 1. Bluetooth wireless communication technology……………………..3 2. About BTH010……………………………………………………….…3  Before use………………………………………………….4 1. Overview…………………………………………………………….….4 2. Charging the headset……………………………………………….…5  How to use……………………………………………….…6 1. Turning on/off the headset……………………………………….……6 2. Pairing the headset with Bluetooth devices………………………....6 How to enter pairing mode…………………………………………....6 Pairing the headset with a Bluetooth cell phone…………………...6 Pairing the headset with a Bluetooth transmitter…………………...7 Multi-pairing………………………………..…………………………...8 3. Re-connecting with a Bluetooth device………………………………8 4. Wearing the headset…………………………………………………...9 5. Making a call with the headset………………………………………...9 6. Music playback……………………………………………………..…..10 7. LED indicator…………………………………………………………...11 8. Indication tone……………………………………………………….…11  Care and maintenance……………………………………11  FAQs…………………………………………………………12  Specifications……………………………………………...13

4) Every time the headset is tured on, it will connect to last connected device automatically. Note: Even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview 1 — Previous track 2 — Multi-function button（MFB） 3 — Next track 4 LED indicator 5 String 6 Folding and retractable string 7 Right loudspeaker 8 Left loudspeaker 9 Microphone 10 Micro USB — Charging jack 11 Volume + — Volume up 12 Volume - — Volume down

2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommendable to charge the battery fully for the first time. When the headset is low power, red LED flashes twice and the headset emits three “Dong” tones every 20 seconds. Please recharge the battery of the headset. Using travel charger Connect the charger to a standard power outlet and the charger plug to the charging jack of the headset. Red LED is on while charging. It takes about 2 hours to charge the battery fully. When charging has completed, red LED will be off. Using USB cable Connect the USB cable to an computer USB port and the USB cable plug to the charging jack of the headset. Red LED is on while charging. It takes about 2 hours to charge the battery fully. When charging has completed, red LED will be off. Note: Choosing travel charger or USB cable depends on different countries or areas and actual demands. Remarks: 1) The battery is recycled. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place such as sunshine, fire or the like.

 How to use 1. Turning on/off the headset Function Operation LED indicator Indication tone Turning on the headset Press and hold MFB for 3～5 seconds until blue LED flashes Blue LED is on for 1 second A long “DI” tone Turning off the headset Press and hold MFB for 3～5 seconds until red LED flashes Red LED is on for 1 second A long “DI” tone Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 2. Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicator Indication tone Entering pairing mode Ensure the headset is turned off, otherwise turn it off first and then press and hold MFB for 5～7 seconds until LED flashes red and blue alternately LED flashes red and blue alternately Two short “DU” tones Remark: Pairing mode will last 2 minutes. If the headset still can’t pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically in order to save power. Pairing the headset with a Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Place the headset and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart; 2) Enter the headset’s pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices. After the search is completed, select “BTH010” from the Bluetooth device list; 4) According to the indication, enter password or PIN No:”0000” and press ” Yes” or “confirm”; 5) After successful pairing, select “BTH010” in the Bluetooth device list, and press “connect”. 6) After successful connecting, blue LED flashes twice every 5 seconds.

Remarks:  If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time.  Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the headset with the new device according to steps 1～6 mentioned above.  If the Bluetooth version of your cell phone is V2.1 and above, it will no need to enter pairing password when the headset pairs with your cell phone, they will match automatically. Pairing the headset with a Bluetooth transmitter You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT001 iPod Bluetooth transmitter for example. The pairing procedures are as follows: 1) Place the headset and the Bluetooth transmitter where they are easily viewable by no more than 1 meter apart; 2) Enter the headset’s pairing mode (Please refer to “How to enter pairing mode); 3) Turn on Bluetooth transmitter. It will search for Bluetooth devices automatically and send a pairing request; 4) When the headset requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, blue LED will flash twice every 5 seconds. Remarks:  The pairing password of the headset is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”.  If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information.

Remarks: 1) Not all cell phones support all functions listed above. Please refer to your cell phone’s user’s manual for further information. 2) When the volume is adjusted to max. or min., you will hear a “DI” tone. 3) When pressing the answer button on some cell phones, the call will be sent to the cell phone. You have to switch the call to the headset manually then. Please refer to your cell phone’s user’s manual for further information. 6. Music playback After connecting the headset to a Bluetooth cell phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the headset. Function Status of the headset Operation Volume up Playing music Short or Long press volume + Volume down Playing music Short or Long press volume - Pause Playing music Short press MFB Play Pausing Short press MFB Previous track Playing music Short press button once Next track Playing music Short press button once Remark:  When playing music on some cell phones, the music will be transmitted to the cell phone’s speaker instead to the headset. You have to select to transmit the sound via Bluetooth in the settings menu and then choose “BTH010” as speaker device. The music will be transmitted to the headset. Please refer to your cell phone’s user’s manual for further information.  When the volume is adjusted to max. or min., you will hear a “DI” tone.  If you want to remote control previous/next track, pause/play, it needs your Bluetooth cell phone or Bluetooth transmitter paird with the headset to support AVRCP.

7. LED indicator 1) When the headset is charging LED indicator Status of the headset Red LED is on Charging in progress Red LED is off Finish charging 2) When the headset connected to a Bluetooth device LED indicator Status of the headset LED flashes red and blue alternately Pairing mode Blue LED flashes once every 3 seconds Standby mode (not connected with a Bluetooth device) Blue LED flashes twice every 5 seconds Standby mode (connected with a Bluetooth device) Blue LED flashes twice every 4 seconds Incoming call Blue LED flashes once every 2 seconds During a call 8. Indication tone Indication tone Status of the headset Emits 2 tones every 5 seconds During a call (Microphone mute) Emits 3 “Dong” tones every 20 seconds Low power  Care and maintenance Read the following recommendations before using the headset. Following these you will be able to enjoy the product for many years.  Do not expose the headset to liquid, moisture or humidity to avoid the product’s internal circuit being affected.  Don’t use abrasive cleaning solvents to clean the headset.  Do not expose the headset to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t dispose of the headset in a fire as it will result in an explosion

 Don’t expose the headset to contact with sharp objects as this will cause scratches and damage.  Don’t let the headset fall down onto the floor. The internal circuit might get damaged.  Don’t attempt to disassemble the headset as it may get damaged if you are not professional. In case the headset doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1 Why does red LED flash? The headset is low power, it needs to be recharged. 2 Why isn’t red LED on when charging? a) Please make sure the charger connects well with the headset; b) When you didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be on. 3 How far is the effective rang between the headset and Bluetooth cell phone? According to the Bluetooth standard, the max. controllable range of Class II headset is 10 meters. It varies under different environment. 4 What to do when my cell phone search and find the headset? The cell phone will not find the headset if the headset and cell phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5 Why can’t hear the voice from the headset? a) Make sure the headset is turned on; b) Ensure the volume is not too low or mute; c) Make sure the headset connects well with your cell phone; d) Ensure the distance between the headset and your cell phone is in the normal working scope. 6 Why is there no voice when making a call with the headset? a) Make sure your cell phone is in the strong signal area; b) Ensure the headset is in the function range.