Zhongshan K mate General Electronics BTH022 Bluetooth Stereo Headset User Manual BTH022 User s manual

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH022 User s manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH022 User Manual

Users Manual

BTH022 Bluetooth stereo headset User’s manual  Brief introduction……………………………………..….1 1. Bluetooth wireless communication technology…...……………......1 2. About BTH022………………………………..…….………….…..1  Before use………………………………………….……...2 1. Overview……………………………..………………..…………...2 2. Charging the headset………………………….………………....…3  Getting started.……………………………….…………..3 1. Turning on/off the headset……………….……….……………...…3 2. Pairing the headset with Bluetooth devices…………………..….....4 How to enter pairing mode……………………..……………….....4 Pairing the headset with a Bluetooth cell phone…...............….......4 Pairing the headset with a Bluetooth transmitter..………………....5 Multi-pairing………………………………………………….…....6 3. Re-connecting with a Bluetooth device………………………...…..6 4. 3.5mm audio out function...…………………………………….…..7 5. Making a call with the headset…………………………..………....8 6. Music playback………………………………………..……….…...9 7. LED indicator…………………………………………….………..10 8. Indication tone………………………...………………..…...…..…11  Care and maintenance…………………………….….…11  FAQs………………………………………………..….…12  Specifications………………………………….....……....13

4) Every time the headset is tured on, it will automatically connect to last connected device. Note: Even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview 1 LED indicator 2 Volume u p 3 Volume down 4 Multi-function button (MFB): Power on/power off/answer a call/end a call/reject a call/microphone mute/call transfer/redial last number/pause/play 5 Previous track 6 Next track 7 Built-in microphone 8 3.5mm audio out jack and charging jack 9 Clip 2

2. Charging the headset The headset BTH022 comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, red LED flashes twice and the headset emits three “Dong” tones every 20 seconds. Please recharge the battery of the headset. Connect the USB cable to an computer USB port and the USB cable plug to the charging jack of the headset. Red LED is on while charging. It takes about 2 hours to charge the battery fully. When charging has completed, red LED will be off. Remarks: 1) The battery is recycled. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.  Getting started 1. Turning on/off the headset Function Operation LED indicator Turning on Press and hold MFB button for 3～4 seconds until blue LED is on Blue LED is on for 1 second Turning off Press and hold MFB button for 3～4 seconds until red LED is on Red LED is on for 1 second 3 Remark: If the pairing can not be completed within 5 minutes, the headset will then turn off automatically in order to save power. 2. Pairing the headset with Bluetooth devices How to enter pairing mode Function Operation LED indicator

Entering pairing mode Ensure the headset is turned off, otherwise turn it off first and then press and hold MFB button for 6～7 seconds until LED flashes red and blue alternately LED flashes red and blue alternately Remark: Pairing mode will last 2 minutes. If the headset still can’t pair with any Bluetooth devices after 2 minutes, it will return to standby mode automatically. Pairing the headset with a Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures will vary depending on different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Place the headset and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart; 2) Enter the headset’s pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH022” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”; 5) If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 6) Go back to your cell phone’s main menu. For certain cell phone models, a headset icon will be shown on the screen. You should now be able to make and receive a call using the headset. 4 Remarks:  If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, When the number of paired devices exceeds 8, the first one will be replaced.  Every time the headset is turned on, it will connect to last connected

2) Turn off the Bluetooth transmitter; 3) Pair and connect the headset with a Bluetooth cell phone (refer to “pairing the headset with a Bluetooth cell phone”). 4) Turn on the Bluetooth transmitter, it will connect to the headset automatically. Remarks:  After successful multi-pairing, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please repair according to steps 1～4 mentioned above.  For the cell phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the headset simultaneously. At this time, the Bluetooth transmitter may not connect to the headset. 3. Re-connecting with a Bluetooth device 1) Automatic connecting Every time the headset is turned on, it will automatically connect to last connected device. 2) Manual connecting When the headset doesn’t connect to a device supporting HFP, double click MFB button, it will connect to last connected HFP device. When the headset doesn’t connect to a device supporting A2DP, short press﹤button, it will connect to last connected A2DP device. Remarks:  Before connecting to a Bluetooth device, please turn on the Bluetoth device’s Bluetooth function. 6  On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phone’s settings. Please refer to your cell phone’s manual for further information. 4. 3.5mm audio out function The headset BTH022 has a 3.5mm audio out jack, so the music and call can

hearing indication tone End a call During a call Short press MFB button Volume up During a call Short or long press ＋button Volume down During a call Short or long press －button Call transfer (headset to mobile phone) During a call Press and hold MFB button for 2 seconds and release it until hearing indication tone Call transfer (mobile phone to headset) During a call Press and hold MFB button for 2 seconds and release it until hearing indication tone Microphone mute During a call Short press MFB button twice Cancel mute During a call (microphone mute) Short press MFB button twice Voice dial Standby mode and connected to a device Press and hold previous track button for 2 seconds and release it until hearing indication tone Redial last number Standby mode and connected to a device Short press MFB button twice Lock/unlock the buttons Standby mode Simultaneously press and hold MFB and －buttons for 2 seconds and release them until hearing indication tone Clear pairing list Power off Firstly press and hold MFB button and then press and hold ＋button for 8 seconds, and release them until red LED is on for 1 second 8 2) Three-way call Function Status of BTH022 Operation End current call and answer a new incoming call There is a new incoming call Short press MFB button once

Warning: Excessive pressure from earphones can cause hearing loss. Remarks:  Not all cell phones support all functions listed above. Please refer to your cell phone’s user’s manual for further information.  Certain functions and indication tones maybe vary with different models of cell phones.  When the volume is adjusted to max. or min., you will hear a indication tone.  When pressing the answer button on some cell phones, the call will be transferred to the cell phone. You have to switch the call to the headset manually then. Please refer to your cell phone’s user’s manual for further information. 6. Music playback After connecting the headset to a Bluetooth cell phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the headset. Function Status of BTH022 Operation Volume up Playing music Short or long press ＋button 9 Function Status of BTH022 Operation Volume down Playing music Short or long press －button Keep current call and answer a new incoming call There is a new incoming call Short press MFB button twice Call transfer During a call（keep another call） Short press MFB button twice End current call and switch to reserved call During a call（keep another call） Short press MFB button once

Blue LED flashes 3 times every 5 seconds Simultaneously connected to a HFP device and A2DP device Blue LED flashes twice or 3 times every 5 seconds Calling Blue LED flashes twice every 4 seconds Incoming ring Blue LED flashes once every 5 seconds During a call Red LED flashes twice every 20 seconds Low power 8. Indication tone Indication tone Status of BTH022 Emits 2 tones every 5 seconds During a call (Microphone mute) Emits 3 “Dong” tones every 20 seconds Low power  Care and maintenance Read the following recommendations before using the headset. Following these you will be able to enjoy the product for many years.  Turn off the headset before placing it in your pocket or bag. If the MFB button is accidentally depressed, your cell phone may place an unintended call.  Do not expose the headset to liquid, moisture or humidity to avoid the product’s internal circuit being affected.  Don’t use abrasive cleaning solvents to clean the headset.  Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. 11  Don’t dispose of the headset in a fire as it will result in an explosion.  Don’t bring the headset into contact with sharp objects as this will cause scratches and damages.  Don’t let the headset fall down onto the floor. The internal circuit might get damaged.  Don’t attempt to disassemble the headset as it may get damaged if you are not professional.

 If you do not plan to use the headset for a long time, please store it in a dry place that is free from extreme temperatures and dust. In case the headset doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1 Why does red LED flash twice every 20 seconds? The headset is low power, it needs to be recharged. 2 Why isn’t red LED on when charging? a) Please make sure the USB charger connects well with the headset; b) When you didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be on. 3 How far is the effective range between the headset and Bluetooth cell phone? According to the Bluetooth standard, the max. controllable range of Class II headset is 10 meters. It varies under different environment. 4 What to do when my cell phone can not search and find the headset? The cell phone will not find the headset if the headset and cell phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5 Why can’t hear the voice from the headset? a) Make sure the headset is turned on; b) Ensure the volume of the headset is not too low or mute; c) Make sure the headset connects well with your cell phone; 12 d) Ensure the distance between the headset and your cell phone is in the normal working scope. 6 Why is there no voice when making a call with the headset? a) Make sure your cell phone is in the strong signal area; b) Ensure the headset is in the function range.