Zhongshan K mate General Electronics BTH033-KMA26 Bluetooth Stereo Headset User Manual BTH033A

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH033A

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH033 KMA26 User Manual

Users Manual

BTH033-KMA26 Bluetooth stereo headset User’s manual

Contents  Brief introduction…………...…………………………..…....1 1. Bluetooth wireless communication technology……………….…....1 2. About BTH033-KMA26………………………………………...1  Before use……………………………………………………..2 1. Overview…………………………………………………...……2 2. Charging for Headsets……………………………………………3  Getting started……..…………………………………………4 1. Turning on/off the headsets………………………………….......4 2. Pairing headsets with Bluetooth devices………………………..….4 1) How to enter pairing mode………………….………………….4 2) Pairing headsets with a Bluetooth cell phone………………..….5 3) Pairing headsets with a Bluetooth transmitter………………....5 4) Pairing headsets with Multi-devices…………………………….6 3. Re-connecting with a Bluetooth device.......……………………....7 4. Making calls with the headset…………………………………….7 5. Playing music……………………………………………….…...9 6. LED indicator…………………………………………………..11 7. Indication tone………………………………………………….11 8. Factory Reset………………………………………………..….11  Care and maintenance……………………………..………..12  FAQs……………………………………...…………………..12  Specification……………………………...………………..…13

1 3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be same as the headset. And even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview

2 1 Built-in Microphone 7 LED indicator 2 Multi-function button(MFB) 8 Charging jack 3 Next song 9 Volume down 4 Pause/play 10 Volume up 5 Last song 11 Right speaker 6 Line-in jack 12 Left speaker 2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, the headset emits three “Dong” tones every 30 seconds and the red LED flashes. Please recharge the battery of the headset.

3 The way of charging as following: Using USB cable 1. Plug USB charging cable into the USB port of computer 2. Plug another side of USB cable to headset Red light on: Charging Blue light on: Finish charging 3. It will takes about 3 hours to finish charging Remarks: 1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.  Getting started 1. Turning on/off the headset Functions Operation LED indicator Turning on Press and hold MFB button for 3 seconds until blue LED flashes Blue light on one second Turning off Press and hold MFB button for 3 seconds until red LED flashes Red light on one second Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 2. Pairing the headset with Bluetooth devices 1) How to enter pairing mode Functions Operation LED indicator Enter pairing mode Ensure the headset is off, and then press and hold MFB button for 5~6 seconds until red and blue LED flash alternately Red and blue LED flash alternately Remark: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically.

4 2) Pairing the headset with a Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Keep your headset and phone within 1 meter when pairing; 2) Make the headset enter pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH033-KMA26” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”( If the mobile phone supports Bluetooth V2.1, password is not required.); 5) If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 6) After successful connecting, blue LED flashes twice every 4 seconds. Remarks:  If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.  Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the headset with the new device according to steps 1～6 mentioned above. 3) Pairing the headset with a Bluetooth transmitter You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example. The pairing steps are as follows:

5 1) Keep your headset and transmitter within 1 meter when pairing; 2) Make the headset enter pairing mode (Please refer to “How to enter pairing mode); 3) Turn on the Bluetooth transmitter and make it enter paring mode. It will search for Bluetooth devices automatically and send a pairing request; 4) When the headset requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, blue LED of the headset flashes twice every 4 seconds. Remarks:  The pairing password of BTH033-KMA26 is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”.  If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information. 4) Pairing headsets with Multi-devices The headset can connect with two Bluetooth devices at most. If you want to finish the multi-pairing, please refer to the following steps: 1) Firstly, pair and connect the headset with Bluetooth device one (refer to “pairing the headset with a Bluetooth cell phone); 2) Turn off the headset and make it enter paring mode again, pair and connect with Bluetooth device two(refer to “pairing the headset with a Bluetooth cell phone); 3) Operate Bluetooth device one to connect with headset. The headset has already connected with Bluetooth device one and two, the headset also can connect with these two devices automatically next time. Remarks:  After successful multi-pairing, the paired devices will remember each other.  The headset will connect with last connected two devices automatically after turn on.

6  Multi-pair function is off in factory set, the steps of turn on as follows: Turn off multi-pair function: the headset in standby mode, not connect with device, press MFB and volume down button for 3~5 seconds simultaneously and release it until hear a prompt tone. Turn on multi-pair function: the headset in standby mode, not connect with device, press MFB and volume up button for 3~5 seconds simultaneously and release it until hear a prompt tone.  To improve the stabilization of headset, we suggest you turn off the multi-pair function when you only connect with one cell phone. 3. Re-connecting with a Bluetooth device 1) Automatic connecting Every time the headset is turned on, it will connect to last connected device automatically. 2) Manual connecting When the headset is in standby mode and not connect with device, short press any button of headset, it will connect to last connected device. Remarks:  Before connecting to a Bluetooth device, please turn on the Bluetooth function of Bluetooth device.  On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phone’s settings. Please refer to your cell phone’s manual for further information. 4. Making a call with the headset 1) Basic operation Functions Status of headset Operation Cancel a call Calling Short press MFB once Answer a call Incoming ringing Short press MFB once Reject a call Incoming ringing Long press MFB for 2 seconds and release it until listen a tone End a call During a call Short press MFB once Volume up During a call Short or long press + button Volume down During a call Short or long press — button

7 Transfer conversation to mobile phone During a call Long press MFB for 2 seconds Transfer conversation to headset During a call Long press MFB for 2 seconds Microphone mute During a call Double click MFB Cancel mute During a call (microphone mute) Double click MFB Voice dial Standby mode (connected device) Long press button for 2 seconds Redial the last number Standby mode (connected device) Double click MFB 2) Three-ways call operation Functions Status of headsets Operation Answer new call and end current call There are second incoming call Short press once Answer new call and retain current call There are second incoming call Long press for 2 seconds Reject new call and keep current call There are second incoming call Double click button Switch calls Keep conversation Long press for 2 seconds End current call and switch retain call Keep conversation Short press once End retain call and keep current call Keep conversation Double click button Warning: Excessive pressure from earphones and headphones can cause hearing loss. 8

Note:  Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user’s manual.  Different function and prompt tone according to different mobile phone.  When the volume is adjusted to max or min, you will hear one prompt tone.  When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 3) Connecting with two cell phones to make a call Functions Status of headset Operation Retain phone call #1 and answer phone call #2 During phone call #1, phone 2 has incoming call Long press for 2 seconds End phone call #1 and answer phone call #2 During phone call #1, phone 2 has incoming call Short press once Reject phone call #2 and keep current phone call During phone call #1, phone 2 has incoming call Double click button Switch call During call, one of phone call is retained Long press for 2 seconds End current call, back to retain phone call During call, one of phone call is retained Short press once End retain phone call During call, one of phone call is retained Double click button 5. Playing music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Function Status of the headset Operation Volume up Playing music Short press “+”button 9

6. LED indicator 1) Charging LED indicator Status of headset Red LED on Charging Blue LED on Finish charging 2) Pairing with Bluetooth device LED indicator Status of headset Red and blue LED flashes alternately Pairing mode Blue LED flashes once quickly every 2 seconds Not connect device Blue LED flashes twice quickly every 4 seconds Have already connected device Blue LED flashes slowly continuously Calling/incoming call Blue LED flashes once quickly every 4 seconds During a call Red LED flashes instead of blue LED Low battery 7. Indication tone Indication tone Status of the headset Continuous two prompt tone every 10 seconds Conversation mode and microphone mute Three “dong” warning tone every 30 seconds Low battery 8. Factory Reset In the status of standby mode and not connect with device, long press MFB and button for 3~4 seconds simultaneously and release it until the red and blue LED on simultaneously. Remarks:  For factory reset, you should press MFB button first, and then press button or press MFB and button simultaneously.  After factory reset, the paired list of headset will be deleted. When you turn on the headset again, it will enter paired mode automatically, but it won’t connect with device automatically, you should re-pair and connect with devices. 11

 Care and maintenance Read the following recommendations carefully before using BTH033-KMA26. Following these you will be able to enjoy this product for many years.  Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected.  Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t use this product during sport to avoid the sweat into product so that damage the product. This product is not water-resistant.  Don’t expose the product to cold areas. It may damage the internal circuit board.  Don’t try to disassemble the product as it may get damaged if you are not professional.  Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might get damaged.  Don’t use intensive chemical products or detergent to clean the product.  Don’t scratch the surface with sharp things. In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem  FAQs 1. What does it mean if all the LED indicator turns red? Battery is low power, need to be recharged. 2. Why is the red LED off when charging? a) Please make sure the charging device connect with headset Well; b) You didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the headset and mobile phone? According to the Bluetooth standard, the max available range of ClassII headset is 10 meters. It varies under different environment. 4. Why my mobile phone can not search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 12

Notes: 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Due to the used enclosure material, the device shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Excessive sound pressure from earphones and headphones can cause hearing loss. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. 14