Zhongshan K mate General Electronics BTH059 Bluetooth Stereo Headset User Manual BTH033

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Stereo Headset BTH033

UserManual.wiki >

Zhongshan K mate General Electronics >

BTH059 User Manual

User Manual

BTH059 Bluetooth stereo headset User’s manual

Contents  Brief introduction…………...…………………………..…....1 1. Bluetooth wireless communication technology……………….........1 2. About BTH059…………………………………………………...1  Before use……………………………………………………..2 1. Overview…………………………………………………...……2 2. Charging for headset..……………………………………………3  Getting started……..…………………………………………3 1. Turning on/off the headset…………....………………………......3 2. Pairing headset with Bluetooth devices…….…………………..….4 1) How to enter pairing mode………………….………………….4 2) Pairing headset with Bluetooth cell phone…………………..….4 3) Pairing headset with Bluetooth transmitter………..…………....5 3. Reconnecting the headsets with devices………………………....6 4. Wearing the headset.......................................................................6 5. Making a call with the headset………………………………….7 6. Playing music……………………………………………….…...8 7. Restore factory default and resetting...............................................9 8. LED indicator….………………………………………..……….9 9. Indication tone……………..………………………………..….10  Care and maintenance……………………………..………..10  FAQs……………………………………...…………………..11  Specification……………………………...………………..…12

3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be same as the headset. And even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Before use 1. Overview 1 Right speaker 6 Left speaker 2 Microphone 7 ∧ button: volume up/ previous song 3 Charging jack 8 ∨ button: volume down/ next song 4 MFB button 9 LED indicator 5 Retractable headband 2 2. Charging for headset

The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, the headset emits three “Dong” tones every 30 seconds and the red LED flashes twice. Please recharge the battery of the headset. The way of charging as following: Using USB cable 1. Plug the USB charging cable into the USB port of PC 2. Plug another side of cable to the charging jack of headset Red light on: Charging Red light off: Finish charging 3. It will takes about 3 hours to finfish charging Remarks: 1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.  Getting started 1. Turning on/off the headset Functions Operation LED indicator Prompt tone Turning on Press and hold MFB button about 3~5 seconds until blue LED flashes Blue LED on one second One long “du” tone Turning off Press and hold MFB button about 3~5 seconds until red LED flashes Red LED on one second One long “du” tone Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes. 3 2. Pairing the headset with Bluetooth devices

1) How to enter pairing mode Functions Operation LED indicator Prompt tone Entering pairing mode Ensure the headset is off, otherwise please turn it off first. And then press and hold MFB button about 7~9 seconds until red and blue LED flash alternately Red and blue LED flash alternately Continuously two short “du” tone Remark: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically. 2) Pairing headset with Bluetooth cell phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows: 1) Keep your headset and phone within 1 meter when pairing; 2) Make the headset enter pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH059” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”. ( If the mobile phone supports Bluetooth V2.1, password is not required.). If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 5) After successful paired, choose and connect “BTH059” from the list of devices shown on cell phone; 6) After successful connecting, blue LED of headset will flashes twice or three times every 4 seconds 4 Remarks:

 If pairing is failed, please turn off the headset first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can remember 8 paired devices, when the number of paired devices exceeds 8, the first one will be replaced.  Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the headset with the new device according to steps 1～6 mentioned above. 3) Pairing headset with Bluetooth transmitter You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example. The pairing steps are as follows: 1) Keep your headset and transmitter within 1 meter when pairing; 2) Make the headset enter pairing mode (Please refer to “How to enter pairing mode); 3) Turn on the Bluetooth transmitter and make it enter pairing mode. It will search for Bluetooth devices automatically and send a pairing request; 4) When the headset requests to enter a PIN No., the transmitter will response “0000” automatically; 5) After successful pairing and connecting, blue LED of the headset flashes twice every 4 seconds. Remarks:  The pairing password of the headset is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”.  If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information. 5 3. Reconnecting the headset with devices

1) Basic operation Functions Status of headset Operation Answer a call Incoming call ringing Short press MFB once Reject a call Incoming call ringing Long press MFB about 2 seconds and release it until listen a tone End a call During a call Short press MFB once Volume up During a call Short press∧ button Volume down During a call Short press ∨ button Switch call between headset and mobile phone During a call Long press MFB about 2 seconds and release it until listen a tone Microphone mute During a call Double click MFB button Cancel mute During a call (microphone mute) Double click MFB button Voice dial Standby mode (connected device) Long press MFB about 2 seconds and release it until listen a tone Redial the last number Standby mode (connected device) Double click MFB button 7 2) Three-ways call operation

Functions Status of headset Operation Answer new call end current call There is second incoming call Short press MFB once Answer new call retain current call There is second incoming call Short press MFB twice Switch call Keep conversation Short press MFB twice End current call back to retain call Keep conversation Short press MFB once Warning: Excessive pressure from earphones and headphones can cause hearing loss. Note:  Not all the mobile phones support all the functions listed above. Please refer to your mobile phone user’s manual.  Different function and prompt tone according to different mobile phone.  When the volume is adjusted to max or min, you will hear one prompt tone.  When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating on the mobile phone. Please refer to your mobile phone user manual for further information. 6. Playing music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Functions Status of the headset Operation Volume up Playing music Short press “∧”button Volume down Playing music Short press “∨”button Last song Playing music Long press “∧”button Next song Playing music Long press “∨”button Pause Playing music Short press MFB once play Pausing Short press MFB once 8 Notes:

LED indicator Status of headset Red and blue LED flashes alternately Pairing mode Blue LED flashes once every 2 seconds Not connect device Blue LED flashes twice every 4 seconds Connect HFP or A2DP Blue LED flashes three times every 4 seconds Connect HFP and A2DP Blue LED flashes continuously Calling/incoming call Blue LED flashes once quickly every 4 seconds During a call Red LED flashes twice every 30 seconds Low battery 9. Indication tone Indication tone Status of the headset Continuous two prompt tone every 5 seconds Conversation mode and microphone mute Three “dong” warning tone every 30 seconds Low battery  Care and maintenance Read the following recommendations carefully before using BTH059. Following these you will be able to enjoy this product for many years.  Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected.  Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t expose the product to cold areas. It may damage the internal circuit board.  Don’t try to disassemble the product as it may get damaged if you are not professional. 10  Don’t let it fall down onto the floor or other hard surfaces. The internal

circuit might get damaged.  Don’t use intensive chemical products or detergent to clean the product.  Don’t scratch the surface with sharp things.  Don’t use this product during strenuous exercise. It may damage the product if the sweat into product. In case the product does’t function properly, send it to the store you bought it. The staff will help you to solve the problem  FAQs 1. What does it mean when red LED flashes twice every 30 seconds? Battery is low power, need to be recharged. 2. Why is the red LED off when charging? a) Please make sure the charging device connect with headset Well; b) You did’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be ON. 3. How far is the effective rang between the headset and mobile phone? According to the Bluetooth standard, the max available range of Class II headset is 10 meters. It varies under different environment. 4. Why my mobile phone can not search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. 5. Why the headset can not hear the voice? a) Make sure the headset has been switched on; b) Make sure the volume is not too low or muted; c) Make sure the headset connects with the mobile phone correctly; d) Make sure the distance between the headset and the cell phone is in the available Bluetooth range. 11 6. Why the headset can not hear voice clearly in conversation?

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAURION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECTTYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 13