Zhongshan K mate General Electronics BTS010 Bluetooth Speaker User Manual 1 User s manual

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Speaker 1 User s manual

UserManual.wiki >

Zhongshan K mate General Electronics >

BTS010 User Manual

Users Manual

BTS010 Bluetooth Speaker User’s manual  Brief introduction……………………………….…..….…1 1. Bluetooth wireless communication technology…………………..…1 2. About BTS010….…………………………….…………………..…1  Getting started…………………………………….…..…..2 1. Overview…………………………………..…….…………….….…2 2. Charging the battery of the speaker………..…………………….…..3  Using the speaker………………………………..………...3 1. Turning on/off the speaker………………………..………………....3 2. Pairing the speaker with Bluetooth devices…….……………….......4 2.1 How to enter pairing mode…………………………………...…......4 2.2 Pairing the speaker with a Bluetooth cell phone……...………...…..4 2.3 Pairing the speaker with a Bluetooth transmitter……….…….….....5 2.4 Multi-pair…………………………………………………………...5 3. Re-connecting with a Bluetooth device………..……………...….....6 4. Making a call with the speaker………………….……………....…..7 5. Music playback……………………………………………….…......8 5.1 Connecting to a Bluetooth cell phone or Bluetooth transmitter…….8 5.2 3.5mm Line in…………………………………………………...….9 6. LED indicator……………………………………………………......9 7. Indication tone……………………………….……………..…....…10  Care and maintenance……………………………….…..10  FAQs………………………………………………....…....10  Specifications………………………………….....…….....11

4) Every time the speaker is tured on, it will connect to the last connected device automatically. Remark:Even though the paired device and the speaker support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices.  Getting started 1. Overview 1 Microphone 2 Charging socket 3 3.5mm Line-in jack 4 Left loudspeaker 5 Next track 6 Right loudspeaker 7 Answer a call/microphone mute 8 Volume up 9 Previous track 10 LED indicator 11 Play/pause 12 Volume down 13 Turning on/off, end a call, reject a call or cancel calling 2

2. Charging the battery of the speaker The speaker comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. Connect the USB cable to an computer USB port and the USB cable plug to the charging socket of the speaker. Red LED will be on while charging. It takes about 3 hours to charge the battery fully. When charging has completed, red LED will be off. When the speaker is on and the battery becomes low, red LED flashes twice and the speaker emits three “Dong” tones every 30 seconds. Please recharge the battery fully as described above. Remarks: 1) The battery will dry up if you don’t use the speaker for a long time. If this happens you have to charge the battery of the speaker for about 30 minutes before the LED indicator will be on. 2) Please don’t attempt to take out the battery from the speaker, as this might damage it. Warning: 1) The battery is recyclable. 2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place such as sunshine, fire or the like.  Using the speaker 1. Turning on/off the speaker Function Operation LED indicator Turning on the speaker Press and hold button for about 3～5 seconds Blue LED is on for 1 second Turning off the speaker Press and hold button for about 3～5 seconds Red LED is on for 1 second Remark: In order to save power, the speaker will turn off automatically if no devices can be connected within 5 minutes. 3

2. Pairing the speaker with Bluetooth devices 2.1 How to enter pairing mode Function Operation LED incicator Entering pairing mode Make sure the speaker is turned off. Press and hold button for 6～7 seconds and then release it until red and Blue LEDs flashes alternately Red and Blue LEDs flashes alternately Remarks:If the pairing can not be completed within 2 minutes, the speaker will switch to standby mode automatically. 2.2 Pairing the speaker with a Bluetooth cell phone Prior to using the speaker for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subjuct to different models of cell phones. Please refer to your cell phone user’s manual for details. The general pairing procedures are as follows: 1) Place the speaker and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart; 2) Enter the speaker’s pairing mode (please refer to “How to enter pairing mode); 3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTS010” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”; 5) If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models); 6) After successful connecting, blue LED flashes twice or three times every 4 seconds. Remarks:  If the pairing is failed, please turn off the speaker first and then re-pair according to steps 1～6 mentioned above.  After pairing is successful, the speaker and the cell phone will remember each other, the speaker will not need to re-pair next time. The speaker can remember 8 paired devices. When the number of paired devices exceeds 8, the first one will be replaced..  Every time the speaker is turned on, it will connect to the last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of the last connected devices first and pair the speaker with the new device according to steps 1～6 mentioned above. 4

Remarks:  After successful multi-pair, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please make the cell phone and the speaker set up hands-free connection first and then turn on the Bluetooth transmitter, multi-connecting can be performed.  For the cell phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the speaker simultaneously. At this time, the Bluetooth transmitter may not connect to the speaker. 3. Re-connecting with a Bluetooth device 1) Automatic connecting Every time the speaker is turned on, it will connect to the last connected device automatically. 2) Connecting manually When the speaker is in standby mode and doesn’t connect to a device supporting HFP, short press green button once, it will try to connect to last connected HFP device When the speaker is in standby mode and doesn’t connect to a device supporting A2DP, short press button once, it will try to connect to last connected A2DP device Remarks:  Before connecting to a Bluetooth device, please turn on the Bluetoth device’s Bluetooth function.  On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phone’s settings. Please refer to your cell phone’s manual for further information. 6

4. Making a call with the speaker Function Status of BTS010 Operation Basic Operation Cancel calling Calling Short press red button once Answer a call Incoming ring Short press green button once Reject a call Incoming ring Short press red button once End a call During a call Short press red button once Volume up During a call Short or long press + button Volume down During a call Short or long press － button Call transfer During a call Press and hold green button for about 2 seconds Microphone mute During a call Short press green button twice Cancel mute During a call (Mute) Short press green button twice Voice dial Standby mode and connected Press and hold green button for about 2 seconds Redial last number Standby mode and connected Short press green button twice Cancel pairing list (reset to factory defaults) Turned on Press and hold red and green buttons for about 7～8 seconds, then release the buttons until red LED is on for 1 seconds Three-way calling Answer a new incoming call and end current call There is a new incoming call Double click green button Answer a new incoming call and keep current call There is a new incoming call Short press green button Switch between two calls During a call (Keeping a call) Short press green button End current call and switch to the call to be kept During a call (Keeping a call) Double click green button 7

Remarks:  Not all cell phones support all functions listed above. Please refer to your cell phone’s user’s manual for further information.  When the volume is adjusted to Max. or Min., you will hear a indication tone.  When pressing the answer button on some cell phones, the call will be sent to the cell phone. You have to switch the call to the speaker manually then. Please refer to your cell phone’s user’s manual for further information. 5. Music playback 5.1 Connecting to a Bluetooth cell phone or Bluetooth transmitter After connecting the speaker to a Bluetooth cell phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the speaker. Function Status of BTS010 Operation Volume up Playing music Short or long press + button Volume down Playing music Short or long press － button Previous track Playing music Short press button once Next track Playing music Short press button once Pause Playing music Short press button once Play Pausing Short press button once Remarks:  When playing music on some cell phones, the music will be transmitted to the cell phone’s speaker instead to the speaker. You have to select to transmit the sound via Bluetooth in the settings menu and then choose “BTS010” as speaker device. The music will be transmitted to the speaker then. Please refer to the your cell phone’s user manual for further information.  When the volume is adjusted to Max. or Min., you will hear a indication tone.  If you want to remote control previous/next track, pause/play, it needs the Bluetooth cell phone or Bluetooth transmitter paird with the speaker to support AVRCP. 8

5.2 3.5mm Line in You can connect other music player to the LINE IN jack of the speaker by using a 3.5mm to 3.5mm audio cable to play music, such as a MP3 or CD player etc. Remarks:  When insert 3.5mm audio cable, you can not remotely control pause/play, previous/next track with the speaker.  When insert 3.5mm audio cable, the Bluetooth function will be not available. 6. LED indicator When the speaker is charging LED indicator Status of BTS010 The LED is red Charging in progress The LED is off Finish charging When the speaker connected to a Bluetooth device LED indicator Status of BTS010 Red and blue LEDs flash alternately Pairing mode Blue LED flashes once quickly every 2 seconds Not connected Blue LED flashes twice quickly every 4 seconds Set up HFP or A2DP connection Blue LED flashes three times quickly every 4 seconds Set up HFP and A2DP connection Blue LED flashes quickly and continuously Incoming call/calling Blue LED flashes once quickly every 4 seconds During a call Red LED flashes twice every 30 seconds Low power Red LED is on Plug 3.5mm audio cable 9

7. Indication tone Indication tone Status of BTS010 Emits 2 tones every 10 seconds During a call and microphone mute Emits 3 “Dong” tones every 30 seconds Low power  Care and maintenance Read the following recommendations before using the speaker. Following these you will be able to enjoy our product for many years.  Do not expose the speaker to liquid, moisture or humidity to avoid the product’s internal circuit being affected.  Don’t use abrasive cleaning solvents to clean the speaker.  Do not expose the speaker to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.  Don’t dispose of the speaker in a fire as it will result in an explosion  Don’t expose the speaker to contact with sharp objects as this will cause scratches and damage.  Don’t let it fall down onto the floor. The internal circuit might get damaged.  Don’t attempt to disassemble the product as it may get damaged if you are not professional. In case the speaker doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.  FAQs 1. Why does red LED flash twice every 30 seconds? The speakeris low power, it needs to be recharged. 2. Why isn’t red LED on when charging? a) Please make sure the USB charger connects well with the speaker; b) When you didn’t use the speaker for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red LED will be on. 10