Zhongshan K mate General Electronics BTT010 Bluetooth Transmitter for iPod User Manual 7 BTT010

Zhongshan K-mate General Electronics Co., Ltd Bluetooth Transmitter for iPod 7 BTT010

User Manual

BTT010 1 BTT010 Bluetooth Transmitter for iPod User Manual  Before using 1. About the BTT010 2. Overview  Start to use 1. Switching on/off the transmitter 2. Pairing with Bluetooth devices 3. Music remote control 4. Indicator LED  Care and maintenance  FAQs  Specification 
BTT010 2 Welcome to use this stereo Bluetooth transmitter, BTT010. Before using it, please read this user manual carefully ƵƵƵƵBefore using 1. About BTT010 BTT010 is a Bluetooth transmitter. for iPod. It supports the following Bluetooth profiles. Profiles Description A2DP (Advanced audio distribution) Stereo music play AVRCP(Audio/video remote control) Music remote control(control the function of pauseǃplayǃlast song and next song) As long as you plug the transmitter into the iPod, and pair with your stereo Bluetooth receiver(such as stereo Bluetooth headsets or Bluetooth speakers),you can enjoy music wirelessly. Additionally , you can remote control your iPod through operating the receiver if your Bluetooth receiver also supports AVRCP ,. Using it as soon as you plug it in, no need to charge. It is very convenient. 2. Overview 1 iPod dock connector——using it to connect with iPod 2 Indicator LED——status indication
BTT010 3 ƵƵƵƵStart to use ǃǃǃǃSwitching on/off the transmitter Function Operation indicator light Turn on Connect the transmitter with iPod Indicator flashes quickly Turn off Take out the transmitter from iPod Indicator light is off Note：please operate your iPod if the transmitter dose not work. ǃǃǃǃPairing with Bluetooth devices You can enjoy music wirelessly after pairing and connecting the transmitter with Bluetooth receiver,. Before pairing, please make sure your Bluetooth receiver supports A2DP profile. The steps are as follows: 1)ǃKeep the transmitter and your stereo Bluetooth receiver within 5 meters 2)ǃTurn on your Bluetooth receiver, and turn it to pairing mode. 3)ǃConnect the transmitter with iPod, make sure your iPod is on, the indicator light will flash quickly.. 4) ǃThe transmitter will search and pair with the Bluetooth receiver automatically.. 5)ǃAfter successful connecting the transmitter indicator LED will flash slower than before. At this time, play music in the iPod . Note  The transmitter can pair with stereo Bluetooth receivers which PIN Nos. are “0000”“1234” “7777”or“8888”. Connecting with the last paired device automatically when turn on the transmitter.So,.If you want to pair with other devices, please turn off the current receiver, and then start to pair with new device. 3ǃǃǃǃMusic remote control You can remote control last songǃnext songǃpauseǃrevert to play through operating the Bluetooth receiver. This function needs your Bluetooth receiver to support AVRCP(audio/video remote control) profile. Please refer to your user manual of Bluetooth receiver for further information. 4ǃǃǃǃIndicator LED Indicator LED Status of transmitter Blue LED flashes quickly Pairing mode or disconnect with Bluetooth device Blue LED flashes every 2 second connected with Bluetooth device
BTT010 4 ƵƵƵƵCare and maintenance Before using the Bluetooth transmitter, please read the following recommendations ,It will help you to enjoy the product for many year. ƽKeep dry and don’t put it in the wet place, in case of effecting the interior circuit of product. ƽDon’t put the product under the sunlight or place in hot areas. High temperature will shorten the life of electronic device and distort certain plastic. ƽDon’t expose the transmitter to extreme temperatures, which may damage the internal circuit board.ƽDon’t try to take apart the product. It may damage the product if you are not professional ƽDon’t fall off on the floor, or knock the hard substance, it may damage interior circuit.ƽDon’t use intensify chemical or detergent to clean the productƽDon’t scrap the surface with sharp things ƽIf the product can’t work normally, please send it to the regularly asserted store, the staff will help you to solve problem warmly.  FAQs 1 Why can’t turn on the transmitter˛ a) Please make sure the transmitter connect with iPod wellDŽ b) Please operate iPod to make sure iPod is on. 2 Why the transmitter can’t be paired and connected˛ a) Make sure Bluetooth receiver supports A2DP˗ b) Make sure Bluetooth receiver is placed within 5 meters˗ c Make sure Bluetooth receiver is in pairing mode. 3 Why no music from receiver˛ a) Make sure transmitter connects with iPod wellDŽ b) Please make sure iPod is playing musicDŽ 
BTT010 5  specification Bluetooth version: Bluetooth V2.1 Bluetooth profiles: A2DP, AVRCP Frequency range: 2.40GHZ-2.4835GHz Effective range: Up to 10m Dimension: 43.5*15*6.6mm Weight: 4.5g Rating: DC 3.3V, 50mA Operating Temperature: -10ć - +45ć Storage temperature: -20ć - +70ć This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 

Navigation menu