Zhongshan World Team Electronics BS-36 Detachable Bluetooth Speaker User Manual
Zhongshan World Team Electronics Co., Ltd. Detachable Bluetooth Speaker
User Manual
BS-36 Detachable Bluetooth Speaker
User Manual
Graphic illustration
Function Indicator
1. Volume up / previous song
2. Volume down / next song
3. LED indicator light
4. Music Play / Pause
5. Power on/off button & Mode switching button
6. USB 2.0 socket
7. TF card reader
8. AUX/3.5mm audio input socket
9. Micro USB charging port, DC 5V
Installation
How to install the detached speakers?
STEP 1 Put the speaker on the right way to the dock
STEP 2 Turn to this direction to lock on the dock
STEP 3 Finished and Enjoy your music!
How to assemble the speakers?
STEP 1 Making two parts parallel, one part turns a little bit
STEP 2 Make sure two parts can plug together without barriers
STEP 3 Plug in and turn to lock
STEP 4 Finished and Enjoy your music!
Operation Instruction
Bluetooth mode
1. Power on: long press ON/OFF button for 3 to 5 seconds. Then you will hear the voice
prompt with the indicator light flashing. Bluetooth searching mode starts automatically
after power on.
2. Switch on Bluetooth searching mode on the cell phone. After pairing successfully, the
device name(BS-36) will be shown connected on the cell phone, then you can open
phone player and play songs. Due to different brands of mobile phone and Bluetooth
versions, the searching and pairing time will be various. Under normal circumstances, it
only takes 30 seconds. If pairing password is needed, please type “0000” on the cell
phone.
3. Long press “+” ”-” to volume up / down.
4. Short press “+” “-” to switch song.
5. Short press “｜” button to play or pause music.
3.5mm audio input mode
1. Using 3.5mm line to connect the cell phone / MP3 / computer, plug the cable into audio
input socket on speaker.
2. Turn on the speaker. It will automatically switch to the AUX mode. If the speaker is in
other mode, please press the mode switching button to AUX mode.
3. Long press “+” “-” to volume up / down.
4. Short press “｜” button to play or mute the speaker
NOTE: No next / previous song function under 3.5mm Audio Mode.
TV Mode
1. Connect the 3.5mm plug to the speaker, and connect the RCA plug to the TV RCA
audio output socket.
2. Turn on the speaker, it will automatically switch to the AUX mode. If the speaker is in
other mode,please press the mode switching button to AUX mode.
3. Long press “+” “-” button to volume up / down
4. Short press “｜”button to play or mute the speaker
NOTE:1) Make sure the TV has RCA audio output socket
2) Make sure the RCA plug connect correctly to the TV RCA audio output socket
3) If the TV has 3.5mm audio output socket, please refer to 3.5mm audio input
mode connect method
4) The speaker can not switch the TV channel and previous/next song in AUX
mode
FM radio mode
1. Turn on the speaker(now enter the Bluetooth Mode), plug the 3.5mm line as radio
antenna(now enter the AUX mode),then press the mode switching button to FM radio
mode.
2. FM radio searching: long press “｜” button to search the channel and the indicator light
starts flashing at the same time.
3. Short press “｜” button to stop searching.
4. Long press “+” “-” to volume up / down.
5. Short press “+” “-” to switch the radio channel. If fail to switch more than 2 channels,
please search the channel again.
6. Short press “｜” button to mute or play the speaker
TF Card Mode
1. Put the TF card into the TF card reader.
2. Turn on the speaker. It will automatically switch to the TF card music play mode. If the
speaker is in other mode, please press the mode switching button to the TF card mode.
3. Long press “+” “-” to volume up / down.
4. Short press “+” “-” to switch song.
5. Short press “｜” button to play or pause the music.
6. TF card insert direction: please refer to below picture.
USB Mode
1. Plug the USB flash drive into the USB socket
2. Turn on the speaker. It will automatically switch to the USB music play mode. If the
speaker is in other mode, please press the mode switching button to USB drive mode.
3. Long press “+” “-” to volume up / down.
4. Short press “+” “-” to switch song.
5. Short press “｜” button to play or pause the music.
Battery Charge
Use the offered USB charging cable to charge the speaker by connecting to the computer
or 5V/1A-2A power source. The indicator light will turn red while charging. When the
battery is full charged, the red indicator light will turn off.
Common problems and solving method
1. Connecting for many times still unsuccessful?
(1) Check the speaker whether is in Bluetooth searching mode.
(2) If there are too many Bluetooth receivers around, it may cause the difficulty on
searching. Please turn off other Bluetooth receivers.
(3) Open the Bluetooth settings on your phone, cancel pairing and reconnect.
2. The volume of speaker is too low or appear distortion? Please check the volume
settings of your phone and adjust the volume.
3. Discontinuities appear when playing music? Please check the distance whether is out
of effective range or there are barriers between your phone and the speaker.
4. The buttons have no effect to the speaker? Please try to use the player on phone or
other players.
NOTE:
1. If connected to tablet, please refer to the phone connection method.
2. Laptop connection: Due to having many laptop’s Bluetooth versions, the connecting
method would be various. If fail to connect or play at the first time, please download the
latest Bluetooth driver.
3. When the speaker is not operated within 5 minutes, it will automatically turn off to save
the power.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body