Zhuhai HiVi Technology HIVI Multimedia Active Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3591329
Application ID	61m7DP3+U9Uw1SZ+QWmStQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.42kB (505190 bits)
Date Submitted	2017-10-03 00:00:00
Date Available	2017-10-03 00:00:00
Creation Date	2017-09-22 14:42:31
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-09-27 11:09:06
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	yfsjs

HiVi M200MKII(WiFi)多媒体有源 音箱
产 品说明 书
HiVi惠威.美国
HiVi Acoustics, Inc.
11630 Goldring Road, Arcadia, CA 91006, USA
Tel: +1 626 930 0606 Fax: +1 626 930 0609
HiVi惠威.中国
珠海惠威科技有限公司
广东珠海市联港工业区东成路南1号
电话:0756-6268035 传真:0756-6268006、6268052
客户服务热线：400-090-9199
www.hivi.com
因设计变更等原因，所示资料可能与实物不符，恕不另行通知。
Due to the reasons in the change of design or others, product information contained here may not be
in conformity with product itself. We reserve the right of no prior notice before change.
www.hivi.com
IMPORTANT SAFETY INSTRUCTIONS
device in a place that air flow over the
ventilation openings might be hindered,
such as in a bookshelf or a drawer.
This product should be operated only
from the type of power source indicated
on the back panel of the device. The
power cord of this product should be
restored in a place that is less possibly
be walked on or get pierced, especially
its plug, convenience receptacles and the
point where power cord exit from the
apparatus.
Before cleaning this product, make sure
the plug is disconnected from the outlet.
Proceed with the cleaning in the way that
this instruction recommends only.
When this product is not in use for a long
time, make sure to unplug the power
cord from the AC outlet.
If below problem happens, send this
product to a qualified service personnel
WARNING
To reduce the risk of fire or electric
shock,Do not expose this apparatus to
rain or moisture.
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash within an
equilateral triangle on the left side
is intended to alert you to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute an
electric shock to persons.
The exclamation point within an
equilateral triangle on the left side
is intended to alert you to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Before connecting or using this apparatus, do read carefully all safety warning
and instructions.
Please keep this
instruction for future reference. Please
do comply with all marked warnings on
the appliance and in this instruction.
Do not use this apparatus near water,
for repairing.
A. Power cord or power plug is damaged.
B. Objects have fallen or liquid has been
spilled into this product.
C. This product is exposed to rain or
other liquid.
D. This product functions abnormally or
very poorly.
E. This product has been dropped or has
a damaged enclosure.
Never to attempt to repair this product by
yourself. Refer all servicing to a qualified
servicing personnel.
such as bath tub, lavabo, kitchen sink,
washing basin, humid basement, or near
a swimming pool.
This device should be installed or set up
in a position that ventilation can be
assured. For example, do not put the
device in a place that its ventilation
openings might be blocked by bed, sofa,
blanket or similar items. Neither put the
CAUTION
To reduce the risk of electric shock, the
power plug must be completely inserted
into an AC outlet.
XII、Warranty
If the problem still exists, please contact the local dealer to handle it.
This device complies with Part 15 of the FCC Rules.
Operation is subject of the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
13
This product does not contain any parts
or components that can be repaired by
users themselves. Do not open the
enclosure, otherwise it may result in an
electric shock. Refer all servicing to a
qualified servicing personnel.
When you unplug this product from AC
outlet, do hold the power plug and pull.
Do not pull the power cord. Do not
overload AC outlets or the extension
cord, as this can lead to risk of fire or
electric shock.
When this product is put
on a cart, do move the
cart carefully to
prevent this product
from dropping.
When repairing or replacement of parts is
required, make sure the service technician has used the parts/components
specified by the manufacturer or
parts/components that have the same
characteristics as the original
parts/components. Unauthorized
substitutions may result in risk of fire,
electric shock or other hazards.
POWER SOURCE
Before connecting this product with AC
outlet, do check and make sure the
electric supply voltage is as same as it is
marked on the rear panel of this product.
WARNING: It's very ddangerous to
insert a power plug thathas bare wire
into an AC outlet.
DECLARATION
This product does not contain any
parts or components that can be
repaired by users themselves. If there
is any malfunction, refer to this
instruction or ask for repair by a
qualified service technician. Do not try
to repair by yourself, otherwise the
manufacturer will not be responsible
for any consequences resulted
therefrom.
I、Unpacking
X、Trouble shooting
This speaker adopts fine packing material to protect it from damage during shipping.
In the box, you should find: speakers, instruction, connectors, remote control.
We strongly recommend you keep all original packing for possible transport in the
future.
II、Schematic diagram of parts
多媒体有源音箱Multimedia Active Speaker
型号Model: HiVi M200MKII(WiFi)
电源Power: AC 220V~50Hz 96W
Designed by HiVi Acoustics, Inc.
制造商: 珠海惠威科技有限公司
地址: 广东省珠海市联港工业区大林山片区东成路南1号
关注惠威官方网站
www.hivi.com
VOLUME
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
内有高压
请勿打开
背板散热
小心触摸
MAX
MIN
LAN
关/OFF
OPTICAL
1. problem with sound quality
a) Check the drivers if it is working well.
b) Check if the the connection cable and terminals connect correctly with each other.
2. no sound at all
a) Check if the power cord is connected correctly and make sure the power switch is
opened.
b) Check if the cable between the audio source and the speaker is short-circuited.
c) Check the audio source is opened or set up properly.
3. only one speaker has sound
a) Check the audio source is opened or set up properly.
b) Check if the plug of the audio signal cable is out of contact.
4. maintenance
a) Turn off the power switch if the speakers are not use for a long time.
b) Never open the cabinet.
c) Listen to the music at a proper volume.
COAXIAL
AUX2
AUX1
7 8 9 10
XI、Specifications
SPEAKER IN
开/ON
请按接口 指 向 连接
电 源POWER
IFU( instruction
for use)
AC 220V~50Hz 96W
15
LEFT OUT
11 12 13
14
18
19
warranty card
16
20
21
certificate of
approval
22
24
26
28
30
POWER
MUTE
AUX1
AUX2
WiFi
BT
OPT
COAX
VOLUME
17
M200MKII(WiFi)
23
25
27
29
31
Model
HiVi M200MKII(WiFi)
Series
High Definition DSP fractional frequency 2.0 Multimedia loudspeaker Series
System Type
2 way 4 order reflex enclosure speaker system
Drivers Configuration
professional 5.25" mid-bass, professional 26mm hard top tweeter
Frequency Range
56Hz - 20kHz ±3dB (Free Space)
Harmonic Distortion
65Hz - 20kHz ≤1% (2.83V/1m)
Audio Input
RCA1、RCA2、WIFI、LAN、Bluetooh、Optical fiber、SPDIF
Rated Power
40W RMS power per channel、80W RMS power for two channels
Active Crossover Frequency
3.0kHz
Separation
>65dB
Signal-to-Noise
>90dB (non-Weighting)
Input Sensitivity
550mV
Input Impedance
22kΩ
Maximum Input
3000mV
Finish
PVC/Black Matte Surface
Dimensions(WXDXH)
184×242×318mm
Net Weight(each)
Main Speaker:5.5kg
12
Minor Speaker:5.3kg
VIII、Break-in
Break-in refers to the aging period for the speakers to where they perform best
acoustically. Upon purchase the speakers are not broken-in. A period ranging from 48100 hours of usage is recommended before both the amplifier and speaker drivers
behave optimally.
IX、Maintenance
音箱选料考究、工艺精细，在符合要求的环境中，可以长期稳定工作，一般不需要
做特别的护理。音箱表面和扬声器应避免接触腐蚀性液体和气体，不宜长期放置于高
温、潮湿及温度、湿度变化很大的场所，也不宜长期置于阳光直射处。扬声器振膜不要
用手触摸，否则可能损坏扬声器，特别是球顶中音扬声器。如有灰尘可定期用洁净的软
布清除，如有污渍，可用不含强化学溶剂的清洁剂擦拭。
a)
b)
c)
d)
a) avoid magnetic disturbance.
b) Do not place under the sunshine for a long time.
c) Do not place in high temperature or moist environment for a long time.
d) Do not touch the drivers with your hands.
e) Avoid corrosive liquids and gases.
e)
1.
2.
3.
4.
5.
6.
tweeter
woofer
receiver
indicator light
inverted tube
volume adjuster / press、
select、signal、input
7. UTP
8. optical fiber input interface
9. SPDIF input interface
10. AUX1 / AUX2 AV
11. power switch
12. power socket
13. main speaker output interface
14. auxiliary speaker output inerface
15. IFU(instruction for use)
16. warranty card
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
certificate of approval
power cord
RAC switch to 3.5mm audio cable
fiber connector
fiber connected main speaker and
auxiliary speaker
power
sound off(red light)
AUX1 input(sky blue light)
AUX2 input(yellow light)
WiFi input(green light)
bluetooth input(blue light)
optical fiber input(white light)
SPDIF input(purple light)
volume down
volume up
三、产品简介：
As the upgraded version of M200MKII, which is famous in Speaker industry, HiVi
M200MKII(WiFi) keeps the classical appearance design & acoustic design, and
upgraded with new 5.25" long stroke woofer and 26mm metal dome type tweeter. With
more efficient switch power and digital amplifier, HiVi M200MKII(WiFi) has the
advantage of high-effect and low heat, and DSP frequency decomposing technology
makes the voice of speaker more precision.
HiVi M200MKII(WiFi) has complete input functions, equip with double channel linear
input, digital optical fiber input, coaxial digital input, Bluetooth 4.0, LAN and WiFi
connector, which are adapt to various applications of Internet time.
HiVi M200MKII(WiFi) inherited the audio technology of HIVI, reappeared the voice of
legendary.
11
IV、Speaker placement and listening environment
1. Speaker placement:
HiVi recommends you carefully adjust the
placement of each speaker to achieve the
best sound. The ideal placement is on either
side of a TV or computer like shown in the
picture. The height of the speaker would be
better keep 60-100cm above the ground. The
back of speaker should keep at least 30cmdistance with the wall and the distance of
these two speakers keep a distance of 70cm.
VI、Speaker connecting diagram
Bluetooth connection
WiFi connection
Main speaker
PC/TV
Auxiliary speaker
Mobile phone Ipad
TV
多媒体有源音箱Multimedia Active Speaker
型号Model: HiVi M200MKII(WiFi)
电源Power: AC 220V~50Hz 96W
Designed by HiVi Acoustics, Inc.
制造商: 珠海惠威科技有限公司
地址: 广东省珠海市联港工业区大林山片区东成路南1号
关注惠威官方网站
www.hivi.com
VOLUME
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
MIN
2. Listening environment:
In order to get best sound, not only do we recommend using high quality components
to match the speakers, but also a good listening environment. The placement and the
size of the listening ares will influence the sound quality.
A few simple suggestions to optimize your listening environment:
a) carpet the floor to avoid the sound reflection.
b) Decorate the wall with cloth or other sound absorbing materials to improve sound
quality.
c) Use thick curtain to avoid the sound reflection by glass Windows.
Computer
LAN
关/OFF
OPTICAL
内有高压
请勿打开
背板散热
小心触摸
Router
MAX
COAXIAL
AUX2
SPEAKER IN
AUX1
CD/DVD/TV
开/ON
请按接口 指 向 连接
电 源POWER
AC 220V~50Hz 96W
LEFT OUT
Speaker out
Speaker in
Main speaker
Auxiliary speaker
AC 220V~50Hz
Ⅴ、Speaker connecting
There are a built-in power amplifier, power socket, power switch and multiple audio
input interface. The detailed connection steps are as follows.
1. main and auxiliary audio connection:
One end of the speaker connecting line is connected to the interface of signal left out
in the back of the main box, and the other end is connected to the interface of signal
speaker in of the auxiliary box.
2. the connection between the speaker and a TV, computer or ipad:
The speaker can be connected with the computer and other audio equipments such as
a TV set, a tablet computer, etc., and also can be wirelessly connected by WiFi and
Bluetooth.
You should plug the RAC switch of the audio cable into the audio output interface in
the back of the main speaker back while the other end should plugged into audio input
interface of a computer, TV and ipad. In addition, the power switch should keep off
when connecting audio input cable.
3. the connection of speakers:
The power switch should keep off and then connect the power cord with the 220V
power socket.
VII、Listening
1. Connect the speakers to the computer or other audio sources.
2. Place the speaker switch in the ON status, adjust the volume to the OFF state,
turn on the computer or other audio source power switch.
3. turn the volume up gradually when play music or other programs, adjust the
volume to make the sound suitable for your listening habit.
10
无线网络
设备信息
无线局域网
设置
无线安全性
保存
无线局域网
无线网络
设备信息
无线局域网
设置
无线安全性
undefined
Open
保存
无线局域网
无线网络
设备信息
无线局域网
设置
保存
无线局域网
无线安全性
WPA PSK
WPA PSK
WPA PSK
密码
密码
密码
更换设备名称
更换设备名称
更换设备名称
(7) Click WLAN to choose encryption mode for wireless security. Undefined
means that there is no password while the WPA PSK means setting password.
(8) Choose “WPA PSK ” and you can change the password of speaker.
ATTENTION: Your mobile phone should input new password once you change
the password.
(9) Click “changing the device name ” to change speaker name and click save.
ATTENTION: You should choose to connect new speaker name once you
change the speaker name.
4. the connection between the speaker Bluetooth and the mobile phone Bluetooth:
Use the remote control to switch to Bluetooth status. The blue means the Bluetooth in a
pairing state. When Bluetooth is not paired, the indicator light is flickering blue. When
the pairing is successful, it is blue and usually bright.
ATTENTION: M200MKII(WiFi) is the name of the Bluetooth.
5. the connection between the speaker and the Internet:
With built-in WiFi module, you can connect the speakers to the WiFi network and play
the music directly.
When using the remote control to switch to WiFi mode, you can do the following
operations.
ATTENTION: M200MKII_xxxx is the name of the WiFi. xxxx is a suffix name and each
pair speaker has a suffix name.
QQ music and kugou player are suggested to use.
This speaker is recommended to use in a stable Internet environment.
The speaker router automatically erases all records after 24 hours.
Only one mobile phone can connect once a time.
1 wired network connection:
First, connect the cable plug to the network interface in the back of the speaker, and
the speaker supports local songs / network songs at this time. If there is no network
connection at home, it only supports the local downloaded songs and this time the
mobile phone has no access to the internet.
设置
设置
Wi-Fi
Wi-Fi
Wi-Fi
00:37
04:37
Wi-Fi
选取网络...
HiVi M200MKII_xxxx
选取网络...
HiVi M200MKII_xxxx
其他...
iPhone
请输入"HiVi M200MKII_xxxx" 的密码
取消
输入密码
询问是否加入网络
加入
HiVi M200MKII_xxxx
将自动加入已知网络。如果没有已知网络，您必须手动选择。
取消
密码
(1) Turn on the WiFi settings and turn off all wireless network, then connect the
device named “M200MK II _xxx x ” .
(2) Input password, 12345678.
(3) The device connects successfully.
(4) Click the button to play music.
(5) Select the device name “M200MKII_xxxx” and the player connects successfully.
注：音箱停止播放的正确方法：首先暂停播放音乐，点击推送符
，选择“本机”即可。
2 wireless network connection: support the play of local songs and network songs.
设置
设置
Wi-Fi
Wi-Fi
3 system settings:
Wi-Fi
设置
欢迎
Wi-Fi
浏览器
浏览器
请选择要接入的无线网络
选取网络...
HiVi M200MKII_xxxx
无线局域网
设置
版本信息
HiVi M200MKII_xxxx
选取网络...
设备信息
无线网络
设备信息
无线网络：XXXXX已连接
其他...
undefined：
HiVi M200MKII_xxxx
设备名称：
HiVi M200MKII_xxxx
XXXXX
中文
语言：
请输入"HiVi M200MKII_xxxx" 的密码
取消
输入密码
取消
10.10.10.254
询问是否加入网络
取消
10.10.10.254
XXXX X 1
固件版本：
release 3.5.3715.0
XXXXX2
发布日期：
20161115
将自动加入已知网络。如果没有已知网络，您必须手动选择。
10.10.10.254
加入
10.10.10.254
设备序列号： FF310013C4F8EBDEF99CEAA6
XXXXX3
密码
XXXXX4
设置
设置
欢迎
无线网络：没有网络连接
Wi-Fi
00:37
04:37
无线网络
设备信息
设置
保存
设置
无线局域网
无线网络
设备信息
语言
设置
保存
设置
无线局域网
无线局域网
无线网络
设备信息
设置
保存
无线局域网
语言
语言
恢复出厂设置
恢复出厂设置
语言
HiVi M200MKII_xxxx
软件更新
其他...
中文
恢复出厂设置
iPhone
XXXX X 1
HiVi M200MKII_xxxx
XXXXX2
取消
0.0.0.0
Wi-Fi
选取网络...
XXXXX
请 输入密码
192.168.0.120
有线网络IP：
请选择要接入的无线网络
提示消息
无线网络IP：
连 接网络
取消
English
恢复出厂设置
中文
软件更新
固件升级
选取文件
未选择文件
软件更新
Deutsch
确定
Español
undefined
XXXXX3
固件在线更新
undefined
XXXXX4
检查在线更新
(1) Turn on the WiFi settings and turn off all wireless network, then connect the
device named “M200MKII_xxxx”. Later, Input password, 12345678.
(2) The device connects successfully.
(3) Open mobile browser, type 10.10.10.54 in the URL bar and click search to
enter the system settings.
(4) Connect your home wireless network, type password and close browser
once connect successfully.
ATTENTION: The password does not support special symbols.
(5) Enter the mobile WiFi settings and connect the device named
“M200MKII_xxxx”. The password is just your home WiFi network.
(6) Select the device named “M200MKII_xxxx” and point this icon to play music.
(1) Open mobile browser, type 10.10.10.54 in the URL bar and click search to
enter the system settings.
(2) Click “settings” to enter setting homepage.
(3) Show the information of the device.
(4) Click “settings” and choose the language you need then click “save”.
(5) Click “restore factory settings” and it restarts successful once you hear the
tone. Or press the mute key on the remote controller for 5 seconds. It restarts
successful once you see the red light of the speaker is flashing two times.
(6) Update the software
ATTENTION: Be caution to the update of the software.
注意：
软件更新为关键操作，请谨慎。过程中请勿播放音乐等其他操作。在完成页面出现前严
禁断电。在确定设备已经连接到可以访问Internet的无线路由器上，点击“检查在线更新”
按钮，设备检查远端更新服务器上的内容，查看本设备是否有可更新软件包。
本设备支持本地更新包升级和在线更新升级，升级完成后，设备自动重启。
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : yfsjs
Create Date                     : 2017:09:22 14:42:31+08:00
Modify Date                     : 2017:09:27 11:09:06+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : yfsjs
Title                           : M200MKⅡ(WiFi)英文说明书(A版)
Creator Tool                    : CorelDRAW
Metadata Date                   : 2017:09:27 11:09:06+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:34d4bbd3-6124-4af8-b7a6-d7022e8fa1a0
Instance ID                     : uuid:e44ee49b-ee10-4348-b48d-2c010ae62597
Page Count                      : 9

EXIF Metadata provided by EXIF.tools