Zhuhai Raysharp Technology RS-H2104AN Wireless Network Video Recorder User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4043145
Application ID	3eWxAa3N+J3B3qaBF9Q7jw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	98.29kB (1228628 bits)
Date Submitted	2018-10-22 00:00:00
Date Available	2018-10-22 00:00:00
Creation Date	2018-04-28 13:11:19
Producing Software	Adobe Acrobat Pro 10.1.16
Document Lastmod	2018-04-28 13:18:03
Document Title	User Manual
Document Creator	Adobe Acrobat Pro 10.1.16

HD Wire—Free Security System
www.raysharp.cn
* Upgrade your DVR firmware and mobile app to the latest versions.
* Please note that an upload speed of 3 Mbps is required for remote
video streaming. Up to 3 devices may connect to the system at the
same time.
* Ensure you have completed initial setup of the Lorex Secure app and
the DVR as detailed in the Quick Connection Guide.
aySharp Secure:App Overview
Homescreen
+o ® App information
Add new device
ENess Top to view systems, comeras ar groups
View all channels
Tap the play button ( )) on a channel to
view lve video.
Limons
Configure device settings [see the section
"Lorex Secure: Device Settings" for details}
Top a chonnel to view lve video or.
configure camera settings. See the image
ds below for channel screen overview.
Garden Shed
Balcony Garage
Channel Screen
Return to homescreen Comere Neme
Play back recarded video [see the section
"Lorex Secure: Playback" for details)
Uate and time stomp
Signal strength
Battery life
Top to stream live video from the comera
Recording indlicator
Disable the selected comera
Configure device settings (see the section
"Lorex Secure: Device Settings" for details)
Tep to capture a snapshot of the current
comera image
Top to manually record video, then top
again to stop
Record
View video in enhanced resolution
Enhance Snapshot
tHeaco oR EN. Atinad. 1
@©
ick Reference Guide
RaySharp Secure:Playback
Play back recorded video using the Lorex Secure app.
To play back recorded video:
Launch the Lorex Secure app.
Tap the camera you would like to view recordings from.
1.
2.
3. Tap
4. . The History screen opens:
ocm
* Tap [E:I] to select a date to search
for recordings from.
Motion
+ tep l (108) / lieil (Android) to
filter results by type (Motion or
Manual recording}.
Manual
Motion
* Tap one of the event thumbnails
to play back the selected event.
Playback Controls:
Channel
name
Return to
History view
Stort time
Top the
progress
bor to
change
playback
indicates
motion or
manual
recording
position
ySharp Secure:Device Settings
Change your device settings using the Lorex Secure app.
To change device settings:
1. Launch the Lorex Secure app.
2. Tap 0 next to your wire—free system.
3. Configure the following as needed: Eureictiee d
@ — sutehUser
g2y Swenmmmesinecie
* Device Name: Enter a name of your choice for
your wire—free security system (e.9., My Wire—
Free System}.
+ Switch User: Tap to switch to a different user
for the DVR. Passward entry required.
* Update Password: Tap to change the password
used to log in for the current user.
* Recording Length: Tap to specify how long (in
s ...
Recording Langth
egnotirencme at
seconds) the selected camera will record video a XS:,‘Z?:’!&‘?E" NoR
far when motion is detected.
+ Video Resolution: Tap to chaose the recording yss, Devicetimezone
resolution for the selected camera. You may Ni Anfemismnien
choose 720P or 1080P,
* Device Time Zone: Tap to change the current i Mevienstioatey
time zone. °* fnaeareemmima
* Mobile Notifications: Tap to turn all Benestrermsifcenn
notifications on / off (overrides channel
settings ~ see the section "Lorex Seoure: O hoHlntbive
Channel Settings* below for details}. paemey s e
Endeuemtieame
* Device Error Notifications: Tap to turn
notifications for storage—related issues on / off. ,
Hard rive Ee
eeniinnmitation MK_)
/A
* adedrss
4. Tap SAVE to save settings.
CVE EheC c Ed ce cadhes
Change settings for a specific channel using the Lorex Secure app.
To change device settings:
1. Launch the Lorex Secure app.
2. Tap the channel you wish to configure on the homescreen.
3.  Tap
4. Configure the following as needed: Pss
torex
+ Channel Name: Enter a name of your choice
for the selected channel (e.9., Living Room). Chawenens
corex
* Motion Notifications: Tap to turn motion
notifications on / off for the selected
channel.
y Motion Notifeations
NOTE: Turning off Mobile Notifications
in the Device Settings menu will override
notification preferences for individual
channels.
* Device Settings: Shortcut to Device Settings
menu. See the section "Lorex Secure: Device
Settings* above for details.
5.. Tap Save to save settings.
LHeeo0_oRG._ EN_ RI
mmveort susiopm
V Alnicct
The DVR setup detailed in the Quick Connection Guide is a simplified setup. In
order to access features using the DVR interface, you must complete the full
setup detailed below.
To set up the DVR:
2. Connect the included mouse to the
Mouse / Backup USB port.
1. Connect the DVR to your router
using the included Ethernet cable.
| 4. Connect the included power adapter
to the DVR. Wait a few minutes for
the system to start up.
3. Connect a monitor (not included) to
the HOMI port of the DVR with the
included HDMI cable.
DVR: Using the Mous
1. LEFT—CLIC
* During split—screen display mode:
Double—click an individual channel to
view it in full—screen.
Double—click again to return to the
split—screen display mode.
+ While navigating menus:
Click to open a menu option.
2. RIGHT—CLICK:
* During live view:
Right—click anywhere on the screen to
open the Quick Menu.
* While navigating menus:
Right—click to exit menus.
3. SCROLL WHEEL:
* While navigating menus:
Scroll to move up / down through the
menu content.
NOTE: in live view, hover the mouse cursor over the top of the screen to
open the Navigation Bar. Move the mouse cursor away from the top of
the screen to close the Navigation Bar.
ree
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for complance could void the user‘s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry Canada licence—exempt RSS standard(s).
Operation is subject to the follwing two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation
Le présent appareil est conforme aux CNR «‘Industrie Canada applicables aux appareils radio exempts de
licence, L‘exploitation est autorisée aus deux conditions suivantes :
(1) Tapparell ne doit pas produire de broullage, ot
(2) Tutiisatou de appareil doit accepter tout brouillage radiodlectrique subi, méme si e brouilage est
susceptible d‘en compromettre ie fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmfulinterference in a residentil installation. This equipment generates, uses and can radiate racio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference wl not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to ty to correct the interference by one or more
of the following measures:
—— Reotient or relocate the receiving antenna.
—— Increase the separation between the equipment and receiver.
—— Gonnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—— Consult the dealer or an experienced radioTV technician for help.
FCC and IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled
environment.This equipment should be instaled and operated with a minimum distance of 20cm between the
radiator and your body.
This transmitter must not be co—located or operating in confunction with any other antenna or transmitter.
Déclaration d1 sur Fexposition aux radiations:
Cet équipement est conforme aus limites d‘expositin aux radiations définies par le Canada pour des
environnements non contrdiés.
Cet émetteur ne doit pas 6tre installé au m&me endroit ni utlisé aveo une autre antenne ou un autre
émettour.
Cet équipement doit te installs et utlisé a une distance minimum de 20 em entre Fantenne et votre corps.
teeco_ora EN Rinds 2
@©
DVR: Initial Setup Wizard
For users who wish to use the DVR interface rather than connecting to the
system using the Lorex Secure app, you will have to complete the DVR Setup
Wizard to confirm the correct date and time for the system.
To complete the setup wizard:
1. _ Log in using the system user name (default: admin] and your new, secure
password you recorded on the Quick Connection Guide.
2. The Setup Wizard launches. Click Next to begin.
3. . Click the arrow keys to select a
language for the on—screen display. Click Next
to confirm.
4. Click the arrow keys to select your region. Click
Next to confirm.
5. Enter the date and time:
Click to select the correct date
from the calendar.
»@raw Select the correct time zone from
the dropdown.
Select a time format from the
dropdown. For 12Hour format,
select either AM or PM from the
second dropdown.
Click Next to confirm.
8. — Review the information you have set for the DVR. Click Accept to confirm.
DVR: Quick Menu
Right—click anywhere on the live viewing screen to open the Quick Menu.
&# Main Menu
Open Main Menu
Select camera / live display view
fill Multi View
es
DVR: Search and Playback
Search for and play back video recordings on the OVR
To play back recorded video:
1. From live view, right—click and then click Playback.
Search for and play back recordings
2. Log in using the system user name (default: admin) and your new, secure
password you recorded on the Quick Connection Guide.
3. Use the calendar on the left—side of the screen to select the date to
playback.
4. Check off the channels you would like to search for recordings from on the
left—side of the screen.
5. Click m to search for recordings.
6. Search results appear as thumbnails. Double—click any recording to begin
video playback.
Select 4 s
ow . <
"~__.k a
the day to mm
playback hee is 15| -¥ Thz 3
Select s 2 _ d _ B C _2 Doubte—click
channels to magry i < : "U) Eragry any event
to begin
playback
playback F
Click to ; !‘ lt .
search for ~ Draim! [
recordings
LHeeoo_ore_EN_RI
mveor samerh

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2018:04:28 13:11:19+08:00
Creator                         : Adobe Acrobat Pro 10.1.16
Modify Date                     : 2018:04:28 13:18:03+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:04:28 13:18:03+08:00
Creator Tool                    : Adobe Acrobat Pro 10.1.16
Format                          : application/pdf
Document ID                     : uuid:cd4181b2-077d-421e-84ac-6f4590068bf1
Instance ID                     : uuid:3d966f29-1591-47e1-b4c1-6c25a616c835
Producer                        : Adobe Acrobat Pro 10.1.16
Page Count                      : 2

EXIF Metadata provided by EXIF.tools