Zhuhai Raysharp Technology RSH1104AI Wireless Network Video Recorder User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	3716320
Application ID	9tEfIuI1bZxHNN7J86+JOg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	172.29kB (2153616 bits)
Date Submitted	2018-01-16 00:00:00
Date Available	2018-01-16 00:00:00
Creation Date	2018-01-12 09:43:14
Producing Software	Adobe Acrobat 11.0 Image Conversion Plug-in
Document Lastmod	2018-01-12 09:43:40
Document Title	users manual
Document Creator	Adobe Acrobat 11.0

FlaySr-iarc Secure :‘—.
Play back recorded video using the Lorex Secure app.
To ploy beck recorded video:
Launch the Lorex Secure app.
Tap the camera you would like to view recordings from.
Tap !
The History screen opens:
Ah/
hum—-
- Tap to select a date to search
for recordings from.
- Tap OS] / E [AndrOid] to
filter results by type [Motion or
Menuel recording).
- Tap one of the event thumbnails
to play back the selected event.
Uu' k Reference Guide
Plevlieck Controls:
www. raysharp. on Channel
Return to -
History view
, — Start time
Before You Start
Tnploplay
WWllSe
video
- Upgrade your DVR firmware and mobile app to the latest versions
m” Tap the
- Please note that an upload speed of 3 Mbps is required for remote mg? _ iii?“
video streaming. Up to 3 devices may connect to the system at the manual flex
same time. WWW 50.5.5;
- Ensure you have completed initial setup of the Lorex Secure app and
. . . . . FlaySnarp Secure .‘—‘ i w new ‘l.
the DVR as detailed in the Buick Connection Guide.
Change your device settings using the Lorex Secure app.
To change device eettinge:
. Launch the Lnrex Secure app,
2. Tap a next to your wire-free system.
-Apo information _ _
Configure the followmg as needed:
Add new device
’ TDD m V’EW SYSfE’T'Si Dame'fls Dr Q’DUDS ' Device NIIII: Enter a name of your Choice for
your Wire-free security system (e.g , My Wire~
~ View allchonnels Free system],
Lamp‘lfiunm [ r 1 on a channel to switch Deer: Tap to switch to a different user if, if?" in Mr i. v-rwri
‘ for the ova. Password entry required.
I_ Canny” Mme seams [SEE the 5mm" - ope-u w: Tap to change the password , , mm_ M“
1D,” Secure: gems Settings' for details] used to log in for the current user. ‘ “teammate mm
. - Recording Length: Tap to specify how long [in "MN“
Side Enirance seconds) the selected camera Will record video Enmvmeuhir
for when motion is detected.
Video Retaliation: Tap to choose the recording : murmur"
resolution for the selected camera. You may ‘ 1‘ *“"°”‘°°“"“'“
, ran a channel ta View live Video or choose 721)? or “HOP,
carirrgure camera settings See [lie image Device Tl“. Zone: Tap m change me current . mm“.-
befow (Dr channel screen flvelviBw. time ZDI’lE -f. 1:7? ham-tuit- warm-i
~ Mobil- Nefifluflone: Tao to turn all
notifications on / off (overrides channel
settings - see the section “Lorex Secure:
Channel Settings' below for details].
novice Ermr Netificetlone: Top to turn
notifications for storagerrelated issues on / off.
Device EM mm-
Balcony
4. Tap SAVE to save settings.
FiaySharp Secure
Return ta homescreen * -, . Change settings for a specific channel usmg the Lorex Secure app.
Play buck recorded video [see the section _ _.
"Lo/ex Secure. Ploybock' for details) To chenge device uttinge:
Data and time stumn
Signal strength
Battery life
1. Launch the Limit Secure app.
2. Tap the channel you wish to configure an the homescreen.
3. Tap
mp m 5mm We “1mm,” m comm . 4. Configure the followmg as needed:
, - chennel Mm: Enter a name of your choice
”95m”? ”‘d’mw’ . for the selected channel (e g . Living Room] “W" ”W
LOCK!
D’SUME’ ”9 W991?" “mam L1 ~ Motion Noflficefiene: Tap to turn motion
notifications on / off for the selected
configure device settings [see the section channel ;: Motion Noiificaiiuns
‘Lorex Secure. Devrce Settings“ for details]
More: Turning off nobil- Notification
in the nevice mim- menu wtll override
notification preferences for indiVidual -
channels
Device Settinge: Shortcut to Device Settinge
menu See the section “Lorex Secure. Device
Settings“ above for details
Ton tfl capture U snapshot of the current
camera image
Top to manually record Video. then top
again in sing 5. Tap Save to save settings,
View video in enhanced resolution —
tiil‘iiiit (‘
LNBSUD_URG_EN_R|
LHBM_QRG_EN_RLM i mimw 546mm
DVR: Full
The DVR setup detailed in the Buick Connection lulde is a simplified setup. In
order to access features using the DVR interface. you must complete the full
setup detailed below.
To set up the DVR:
1. Connect the DVR to your router
using the included Ethernet cable.
illi‘i
2. Connect the included mouse to the
Moon / Backup USB port.
3. Connect a monitor [not included] to
the HDMI port of the DVR with the
included HDMI cable.
4. Connect the included power adapter
to the DVR. Wait a few minutes for
the system to start up.
DVR: I lr'illl-Ll Wit“ itlieiiiflu
I. L - LICK:
- During split-screen display mode:
Double—click an individual channel to
view it in full-screen.
Double—click again to return to the
split—screen display mode.
- While navigating menus:
Click to open a menu option.
Q fill" l-BLIGK:
- During live view:
Right—click anywhere on the screen to
open the Quick Menu.
- While navigating manna:
Right-click to exit menus.
3. SQBQLL WHEEL;
- While navigating menus:
Scroll to move up / down through the
menu content.
NOTE: In live view, hover the mouse cursor over the top of the screen to
open the Navigation Bar. Move the mouse cursor away from the top of
the screen to close the Navigation Bar.
Fcc
Caution: Yha our in cmlonad that ton-noo- or modificdliono not oxpm-iy loom-o by on potty
mpontlbl- ler compliance could void the uar'o authority to over-0a the miorrnnt
Thll device oomplial with For! 15 oi tn- rcc m.- Ind mot-try Canada Iioanoa—aiiompl ass tuna-rain).
Dpere Ia eublact to in. renewing two ourouloriu: (1) int- davlee my not cause hermlul Mom. and
(2) thin avloe mutt nae-pi any Imerlaranee room-d. including int-noma- that may out-o mm
Dvflllwm.
Lle ordeant epperall on conform. aux one d'lnduetrla cm. noodle-Nae m opp-rant raoio mmpu on
licence. L ploiuh’on nt outwim we omit condltionl euivlm-l:
(l) I‘lpperell no deli pu mot-in o- orouiil-go. at
(z) l'utlfiutaur ti- l'appnrcii dolt ooooptor tout broil-lop- radioalactrlqua mt. mm- at in moaning. eat
auloaptible d'en oomprornottr. le lonotlonnamant
NOTE: This oqulpmont has been mind and found to oornply whh the limit; tor a Cl.“ 3 digital device.
punuont to Part is of in. rcc Rum. rim- itrrim m design-d to provide roam-til. mason again-t
harmful lntnrtmno. in a neldantlel inelallalion. ”rhit otwiprnont mom. out and can root-u rm
moucnoy mm and. it not hisinllad and true in name-no. with in. “nonunion. rnny coin. harmful
immune. to radio oonunnnlcatitme. However. thorn in no guounln M imoderenoe wil not ooour in a
particular Inetallation.
ll "Ml mmmcm doe! can” Mlm'ul intfl'enno- k) radio or tel-melon rec-won, mall tan b. “I‘M
by turning on aguipma on and on. the uni ia encouraged to try to ootroot in. Maflavance by am or more
oflha loliowing iii-mt :
-- aooriont or igloo-tat naming antenn-
-- lnomu the ”pm-son between tn. oouiprn-ni and raeaivar.
-» eonnoot th- oquiprnont into an arm on n cicuil owl-rant from that to which the receiver ir cor-moo.
-» consult the daelar or on experienced routerrv technician for help.
Fcca lc aaoiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limis sel ronh ror an uncontrolled
environment This equipment should be inslalled and operated min a minimum distance or 20cm between the
radiator and your body
This transnvtter must not be coalocaled or operating in conjunction with any olher antenna or transmitter
Declaration d'IC sur I'exposition aux radiations:
Cet équlpement est conforms aux llmlles d'exposlllon aux radiations oennies par le Canada pour des
enwannements non contraiés Gel équlpemenl doll élre |ns1allé el ullllsé a une dislance minimum de 20 cm
entre l‘antenne et votre corps
Cet émetteur ne dun pas étre ins13|lé au méme endroil nI ullllsé avec une aulre amenne ou un aulre émeur
LNBUXLQfiGjNJLodd a
For users who wish in use the DVR interface rather than connecting to the
system using the Lorex Secure app, you will have to complete the DVR Setup
Wizard to confirm the correct date and time for the system.
To complete the utup wizard:
1. Log in using the system user name [defaultz admin] and your new, secure
password you recorded on the Buick connection Guide.
2. The Setup Wizard launches. Click Next to begin,
3. Click the arrow keys to select a
language for the on-screen display. Click Next
to confirm.
4. Click the arrow keys to select your region. Click
Next to confirm.
5. Enter the date and time:
Click to select the correct date
m from the calendar.
"°""‘ Select the correct time zone from
the dropdown.
Select a time format from the
dropdown. For |2Nour format,
select either AM or PM from the
second dropdolwn.
Click Next to confirm.
6, Review the information you have set for the DVR, Click Accept to confirm.
DVR: D liiit his" .l
Right—click anywhere on the live viewing screen to open the Quick Menu.
fl Main Menu
Multi View
fl Playback
Clpen Main Menu
Select camera / live display view
Search for and play back recordings
Search for and play back video recordings on the DVR.
To play back recorded video:
I. From live view, right~click and then click Playback.
2. Log in using the system user name (default: admin) and your new, secure
password you recorded on the Quick Connection Bulde.
3. Use the calendar on the left-side of the screen to select the date to
playback.
4. Check off the channels you would like to search for recordings from on the
left-side of the screen.
5. Click a to search for recordings.
6. Search results appear as thumbnails. Double—click any recording to begin
video playback.
Select
the day to
playback
Select 2 ' ” Double-click
channels to ' ' . any event
playback to begin
playback
Click to
search for
recordings
LHEBoo,lJRd_EN_Ri
mimiv “mom

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2018:01:12 09:43:14+08:00
Creator                         : Adobe Acrobat 11.0
Modify Date                     : 2018:01:12 09:43:40+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:01:12 09:43:40+08:00
Creator Tool                    : Adobe Acrobat 11.0
Format                          : application/pdf
Document ID                     : uuid:44bcd453-b4c4-4282-955f-6569c3e7840c
Instance ID                     : uuid:d3855abe-59ab-4edc-859f-b77ed3fd077e
Producer                        : Adobe Acrobat 11.0 Image Conversion Plug-in
Page Count                      : 2

EXIF Metadata provided by EXIF.tools