Zimi WTX10 Mi LevPower X Qi Wireless Charger User Manual
Zimi Corporation Mi LevPower X Qi Wireless Charger Users Manual
Zimi >
User Manual
60 mm 60 mm FCC Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 60 mm 18-Month Limited Warranty Warnings This device complies with Part 18 of the FCC Rule This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 80mm 60 mm Do not hard-press, crush, knock, drop, or apply any other mechanical shock. Do not disassemble or alter. Do not place close to fire or toss into fire. Do not expose to or submerge in liquids. Do not use in extreme temperatures, humidity, or corrosive environments, which may damage the circuitry and lead to current leakage. Do not place cards with magnetic stripes or IC chips, such as ID cards, credit card, and bank cards, in the vicinity of this wireless charging pad. Keep medical implants, including but not limited to cardiac pacemakers and cochlear implants, at least 1 foot (or 30.48 cm) away from the wireless charging pad in order to avoid interference with the function of those medical implants. Parental supervision is required to prevent children from playing with the wireless charging pad and any hazards that may result. For FAQs and more information, please visit: The product has an 18-month limited warranty, unless the warranty is voided by one or more of the following: User Guide Warranty expiration ZMI LevPower X Qi Wireless Charger Customer Service Web: zmiusa.com/support Email: support@zmiusa.com Phone: +1 (844) 828-2302 @zmiusa @zmiusa ZMI USA Corporation, 120 San Lucar Ct, Sunnyvale, CA 94086-5213 USA @zmiusacorp Model: WTX10 Read this user guide carefully before use, and retain it for future reference. A compatible AC adapter to be used with this wireless charging pad must meet the following minimum requirements for normal and fast charging, respectively: a. The AC adapter should be capable of outputting 2A at 5V to support wireless charging at 5W. b. The AC adapter should be capable of outputting 2A at 9V (Quick Charge 3.0) to support fast wireless charging at 10W. 3. The center of the device being charged must be aligned with the center of the wireless charging pad. You may need to adjust the placement of the device until the device indicates normal charging or the white LED indicator light stays on. (Please refer to the following diagrams for proper placement of the device relative to the wireless charging pad.) The ZMI LevPower™ X Qi Wireless Charger works with wireless charging enabled smartphones and tablets such as the iPhone 8/ 8 Plus/X and Samsung Galaxy S6 and newer models. Its housing is made of a metal shell and 2.5D toughened glass, giving it a superior build and sleek texture, look, and feel. It is super thin and easy to carry. The charger is also easy to use. Just place your device over it and let the power flow without cumbersome wires. zmiusa.com/support Unauthorized repair, incorrect use, drop, negligence, abuse, liquid damage, accident, alteration, improper use with non-ZMI-branded accessories, or removing or altering product labeling Introduction 60 mm Specifications Product Name ZMI LevPower X Qi Wireless Charger Model WTX10 Input 5V=2A / 9V=1.6A Output 5V=1A / 9V=1.1A Instructions Effective Distance 8 mm (about 5/16 inch) 1. Connect the wireless charging pad to a compatible AC adapter using the ZMI provided cable in the box. Then, the white LED indictor light will flash on/off three times to indicate that the wireless charging pad is ready. Operating Temperature 32° to 104° F (0° to 40° C) Dimensions 3.5×3.5×0.3 in (89×89×7.1 mm) Weight 3.1 oz (89 g) Be in charge, anytime, anywhere USB-C input port White LED indicator light Red LED indicator light 2. Place your wireless charging enabled device at the center of the wireless charging pad. Then, charging will begin. While charging is in progress, the white LED indicator light will stay on. 专色:PANTONE Cool Gray 11C 4. When the red LED indicator light flashes, the wireless charging pad is in an error state or in the protective mode. Check if a metal object is placed on the wireless charging pad. If so, remove the metal object and see if charging goes back to normal. Should the red LED remain on after you have taken these actions, you would need to contact our customer support (email: support@zmiusa.com, phone: +1-844-828-2302) about the problem.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Creator Tool : Adobe Illustrator CC 2014 (Windows) Create Date : 2018:08:23 14:41:47+09:00 Metadata Date : 2018:08:23 14:41:47+08:00 Modify Date : 2018:08:23 14:41:47+08:00 Thumbnail Width : 256 Thumbnail Height : 104 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7697 bytes, use -b option to extract) N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 401.780452 Max Page Size H : 264.600201 Max Page Size Unit : Millimeters Font Name : ArialMT, ElectricIcon, FZYOUH_506L--GB1-4, FZYOUH_508R--GB1-4, MicrosoftYaHeiLight, MicrosoftYaHei Font Family : Arial, ElectricIcon, 方正悠黑, 方正悠黑, 微软雅黑, 微软雅黑 Font Face : Regular, Regular, 506L, 508R, Light, Regular Font Type : Open Type, TrueType, TrueType, TrueType, TrueType, TrueType Font Version : Version 7.00, Version 1.00 December 12, 2017, initial release, 2.00, 2.00, Version 6.23, Version 6.25 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, ELECTRICICON_0.TTF, 方正悠黑_506L.ttf, 方正悠黑_508R.ttf, msyhl.ttc, msyh.ttc Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 11 C, PANTONE Cool Gray 9 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 9 C, PANTONE 519 C, AutoCAD Color 1, PANTONE Cool Gray 11 C Swatch Colorant Type : SPOT, SPOT, PROCESS, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : CMYK, CMYK, CMYK, Lab Swatch Colorant Cyan : 0.000000, 67.000002, 92.971700 Swatch Colorant Magenta : 1.000000, 100.000000, 87.972802 Swatch Colorant Yellow : 0.000000, 30.000001, 89.019603 Swatch Colorant Black : 50.999999, 10.000000, 79.998499 Swatch Colorant L : 36.470589 Swatch Colorant A : 0 Swatch Colorant B : -3 Format : application/pdf Title : 无线充说明书? Rendition Class : proof:pdf Document ID : xmp.did:ba3c0bc0-ff51-af44-94ed-dec2dfcdc7fc Instance ID : uuid:1d179aef-415b-4bc1-b21e-d8211adb0e47 Original Document ID : xmp.did:0C85D8AAF0A5E4119E35DC0E58C5D360 Derived From Instance ID : xmp.iid:b5f6cd89-f2ed-dd4d-bdfe-d4da47262f85 Derived From Document ID : xmp.did:b5f6cd89-f2ed-dd4d-bdfe-d4da47262f85 Derived From Original Document ID: xmp.did:0C85D8AAF0A5E4119E35DC0E58C5D360 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0C85D8AAF0A5E4119E35DC0E58C5D360, xmp.iid:ba3c0bc0-ff51-af44-94ed-dec2dfcdc7fc History When : 2015:01:27 14:49:40+08:00, 2018:08:23 14:41:40+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2014 (Windows) History Changed : /, / Producer : Adobe PDF library 11.00 Trapped : False Nrpages : 1 Startlogpage : 1 Units : mm Vsize : 772.3375258 Hsize : 1172.750811 Margtop : 0. Margbot : 0. Margleft : 0. Margright : 0. Vshrink : 1. Hshrink : 1. Readerspread : False Inks Name : cyan Inks Type : process Inks Book : process Inks Egname : cyan Inks Frequency : 120. Inks Angle : 22.5 Inks Dotshape : Inks R : 0. Inks G : .6292419434 Inks B : .912902832 Inks Attribute : normal Coverage : , , , , , , , Layers Name : Structure Layers Printable : True Layers Locked : False Files : Pagelist Start : 0 Pagelist End : 0 Pagelist Inks : 1, 2, 3, 4, 5, 6, 7, 8 Page Count : 1 Creator : Adobe Illustrator CC 2014 (Windows)EXIF Metadata provided by EXIF.tools