Zippy Technology BY726 Bluetooth Keyboard User Manual BT726 Users Manual 0815
Zippy Technology Corp. Bluetooth Keyboard BT726 Users Manual 0815
Users Manual
1
BT-726 Bluetooth Media keyboard
Turn your PC into a Bluetooth Technology
User's Manual
System requirements
l IBM or compatible PC
l Windows and Macintosh Operating System
l Pentium-equivalent processor or above
l At least 10MB hard disk space
l Bluetooth dongle or system and Bluetooth software
OS support
l Windows XP
l Windows 2000
Introduction
Thank you for your patronage of purchasing our Bluetooth keyboard. For your own safety,
please read this manual thoroughly before using this product. After you have read this
manual, please keep it in place for reference when necessary.
Contents in the package
The following items are included in the package. Please make sure all items are accounted
for as you open the package. If there was any item missing or damaged, please contact the
reseller where the product was purchased or our support center.
l Bluetooth Keyboard x 1
l Manual/warranty x 1
l 2 AAA Alkaline batteries x2
Warning
Zippy Technology Corporation and its respective distributors and resellers are not
responsible for any malfunction, damage or personal injury incurred by:
Any malfunction, damage or personal injury caused by the malfunctioning or damage of the
2
user’s personal computer or misuse of this product.
Any attempt to dismantle, change or modify this product in any manner.
Warning
Please do not use this product in ashy, wet, or oily environments. Failure to do
so may shorten the life of this product and may cause bodily harm.
Please keep this product as far away from Radio Frequency interruption areas
as possible.
This is not an outdoor product. Exposing this product to the elements may cause
damages to the product and bodily harm to its users.
Please do not use petroleum, benzene or thinner-based solution to clean this
product.
Warranty Information
This product is backed by a One-Year Manufacturer’s Warranty, starting from the date of
purchase. The warranty covers for free repair in accordance with the contents stated herein
but does not cover wear and tear and any malfunction or damages as results of improper
usage as stated in this manual.
Specifications
l Keyboard
■ Dimensions: 428x 128x 23 mm
■ Weight: 650+/- 20g (with Battery)
■ Key Number: 104 Keys(By language)
■ Battery: 2 x AAA batteries
■ Battery Life: 2 Month (Base on average usage)
■ Hot Keys : WWW home, e-mail, mute, volume down, volume up
Installation Procedure
Before installing this product please make sure you have available Bluetooth system or
Bluetooth dongle as basement. If your computer did not have an available Bluetooth
function, you may buy a ZIPPY Bluetooth dongle.
3
Setting up the Bluetooth Keyboard
1. Open the Bluetooth software of your system
2. Press the “Refresh” or “Renew” the Bluetooth device.
3. Press the link button of keyboard.(請放入鍵盤 link 鍵示意圖)
4. Your system will find the BT726 keyboard device on your Bluetooth dialog.
5. Then double click the BT726 keyboard device icon, the system will show a link message
and ask you to enter password. (This procedure may different by your Bluetooth
software and system. Please read your system or software instruction.)
6.After your Bluetooth software show the link message, you can use keyboard as well.
Battery Low
1. Low-Battery is indicated by the illumination of the keyboard lens. Please replace the
battery when the LED lights up.
2. We recommend using alkaline batteries for the keyboard.
3. You may need to reset the Link after replacing new batteries for the keyboard.
Warning
Please be careful when resetting the Link for the keyboard. Objects with sharp point may
break and leave behind shards.
Keyboard
Hotkey Functions
There are 5 built-in hotkeys for the BT726 for quick access under the Windows operating
system. Please refer to the following section on their functions.
Home page：Start the WWW browser.
E-mail：Start the e-mail application.
Volume down：Turn down the volume.
Volume up：Turn up the volume.
Mute：Toggle the on/off of the sound.
Troubleshooting
Please visit our On-Line FAQ section for help.
4
FCC Statement on CLASS B
This equipment has been tested and found to comply with the limits foe a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into and outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio / TV technician for help.
Mandatory repair charges are required for the following conditions, even within the
guarantee period:
(1) Malfunction or damage is due to misuse or improper alteration or repair.
(2) Malfunction or damage is caused by the movement or fall during installation after the
purchase.
(3) Malfunction or damage is caused by a fire, salt, gas, earthquake, lightning, wind, water
or other natural calamities, or abnormal voltage.
(4) The manual is not presented.
(5) Date of purchase, customer's name, name of the shop are not filled in or are altered.
(6) Malfunction or damage is caused by other devices connected to the BT-726.
To get the repair service, please disconnect BT-726 from other devices connected.
Date Contents of service
Person in charge
Person in charge
5
This warranty is intended to provide free repair under the terns and period stated herein.
Accordingly, this warranty shall not limit the legal rights entitled to the Customer. For more
information concerning the repair after expiration of the guarantee period, please contact us
or our retailer where you purchased this product.
Names of other products mentioned in this Manual are the trademarks or registered
trademarks of their respective owners.
Warning
As shielded-type power cord is required in order to meet FCC omission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only the
supplied power cord be used.
Use only shielded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
All brand names, trademarks and logos are the properties of their respective owners.
1.•This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.