ZyXEL Communications P660HNT1H 802.11n Wireless ADSL2+ 4-port Gateway User Manual ZyBook2

ZyXEL Communications Corporation 802.11n Wireless ADSL2+ 4-port Gateway ZyBook2

User Manual

Download: ZyXEL Communications P660HNT1H 802.11n Wireless ADSL2+ 4-port Gateway User Manual ZyBook2
Mirror Download [FCC.gov]ZyXEL Communications P660HNT1H 802.11n Wireless ADSL2+ 4-port Gateway User Manual ZyBook2
Document ID1331321
Application IDNkcNGXPMRCY+/j3K2JoZ2g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize291.55kB (3644416 bits)
Date Submitted2010-08-24 00:00:00
Date Available2010-08-24 00:00:00
Creation Date2010-08-16 13:18:02
Producing SoftwareAcrobat Distiller 9.2.0 (Windows)
Document Lastmod2010-08-23 19:55:34
Document TitleZyBook2.book
Document CreatorFrameMaker 7.1
Document Author: 13774

P-660HN-T1h
802.11n Wireless ADSL2+ 4-port Gateway
Default Login Details
IP Address
http://192.168.1.1
Password
1234
Firmware Version 3.40
Edition 1, 6/2010
www.zyxel.com
www.zyxel.com
Copyright © 2010
ZyXEL Communications Corporation
About This User's Guide
About This User's Guide
Intended Audience
This manual is intended for people who want to configure the ZyXEL Device using
the web configurator. You should have at least a basic knowledge of TCP/IP
networking concepts and topology.
Related Documentation
• Quick Start Guide
The Quick Start Guide is designed to help you get up and running right away. It
contains information on setting up your network and configuring for Internet
access.
• Support Disc
Refer to the included CD for support documents.
• ZyXEL Web Site
Please refer to www.zyxel.com for additional support documentation and
product certifications.
Documentation Feedback
Send your comments, questions or suggestions to: techwriters@zyxel.com.tw
Thank you!
The Technical Writing Team, ZyXEL Communications Corp.,
6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 30099, Taiwan.
Need More Help?
More help is available at www.zyxel.com.
P-660HN-T1h User’s Guide
About This User's Guide
• Download Library
Search for the latest product updates and documentation from this link. Read
the Tech Doc Overview to find out how to efficiently use the User Guide, Quick
Start Guide and Command Line Interface Reference Guide in order to better
understand how to use your product.
• Knowledge Base
If you have a specific question about your product, the answer may be here.
This is a collection of answers to previously asked questions about ZyXEL
products.
• Forum
This contains discussions on ZyXEL products. Learn from others who use ZyXEL
products and share your experiences as well.
Customer Support
In the event of problems that cannot be solved by using this manual, you should
contact your vendor. If you cannot contact your vendor, then contact a ZyXEL
office for the region in which you bought the device. See http://www.zyxel.com/
web/contact_us.php for contact information. Please have the following information
ready when you contact an office.
• Product model and serial number.
• Warranty Information.
• Date that you received your device.
• Brief description of the problem and the steps you took to solve it.
Disclaimer
Graphics in this book may differ slightly from the product due to differences in
operating systems, operating system versions, or if you installed updated
firmware/software for your device. Every effort has been made to ensure that the
information in this manual is accurate.
P-660HN-T1h User’s Guide
Document Conventions
Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this User’s Guide.
Warnings tell you about things that could harm you or your device.
Note: Notes tell you other important information (for example, other things you may
need to configure or helpful tips) or recommendations.
Syntax Conventions
• The P-660HN-T1h may be referred to as the “ZyXEL Device”, the “device”, the
“system” or the “product” in this User’s Guide.
• Product labels, screen names, field labels and field choices are all in bold font.
• A key stroke is denoted by square brackets and uppercase text, for example,
[ENTER] means the “enter” or “return” key on your keyboard.
• “Enter” means for you to type one or more characters and then press the
[ENTER] key. “Select” or “choose” means for you to use one of the predefined
choices.
• A right angle bracket ( > ) within a screen name denotes a mouse click. For
example, Maintenance > Log > Log Setting means you first click
Maintenance in the navigation panel, then the Log sub menu and finally the
Log Setting tab to get to that screen.
• Units of measurement may denote the “metric” value or the “scientific” value.
For example, “k” for kilo may denote “1000” or “1024”, “M” for mega may
denote “1000000” or “1048576” and so on.
• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other
words”.
P-660HN-T1h User’s Guide
Document Conventions
Icons Used in Figures
Figures in this User’s Guide may use the following generic icons. The ZyXEL Device
icon is not an exact representation of your device.
ZyXEL Device
Computer
Notebook computer
Server
Firewall
Telephone
Router
Switch
P-660HN-T1h User’s Guide
Safety Warnings
Safety Warnings
• Do NOT use this product near water, for example, in a wet basement or near a swimming
pool.
• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk
of electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to
dangerous high voltage points or other risks. ONLY qualified service personnel should
service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device.
• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in
North America or 230V AC in Europe).
• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the
product where anyone can walk on the power adaptor or cord.
• Do NOT use the device if the power adaptor or cord is damaged as it might cause
electrocution.
• If the power adaptor or cord is damaged, remove it from the device and the power
source.
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a
new one.
• Do not use the device outside, and make sure all the connections are indoors. There is a
remote risk of electric shock from lightning.
• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your
device.
• Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.
• Antenna Warning! This device meets ETSI and FCC certification requirements when using
the included antenna(s). Only use the included antenna(s).
Your product is marked with this symbol, which is known as the WEEE mark. WEEE
stands for Waste Electronics and Electrical Equipment. It means that used electrical
and electronic products should not be mixed with general waste. Used electrical and
electronic equipment should be treated separately.
P-660HN-T1h User’s Guide
Safety Warnings
P-660HN-T1h User’s Guide
Contents Overview
Contents Overview
User’s Guide ........................................................................................................................... 19
Introduction ................................................................................................................................ 21
The Web Configurator ............................................................................................................... 27
Status Screens .......................................................................................................................... 33
Tutorials ..................................................................................................................................... 37
Technical Reference .............................................................................................................. 55
Internet and Wireless Setup Wizard .......................................................................................... 57
WAN Setup ................................................................................................................................ 71
LAN Setup ................................................................................................................................. 87
Wireless LAN ........................................................................................................................... 101
Network Address Translation (NAT) ........................................................................................ 133
Firewall .................................................................................................................................... 149
Filters ....................................................................................................................................... 153
Static Route ............................................................................................................................. 159
802.1Q/1P ............................................................................................................................... 163
Quality of Service (QoS) .......................................................................................................... 169
Dynamic DNS Setup ................................................................................................................ 177
Remote Management .............................................................................................................. 179
Universal Plug-and-Play (UPnP) ............................................................................................. 189
CWMP ..................................................................................................................................... 201
System Settings ....................................................................................................................... 205
Logs ......................................................................................................................................... 209
Tools ........................................................................................................................................ 219
Diagnostic ................................................................................................................................ 227
Troubleshooting ....................................................................................................................... 231
Product Specifications ............................................................................................................. 237
P-660HN-T1h User’s Guide
Contents Overview
10
P-660HN-T1h User’s Guide
Table of Contents
Table of Contents
About This User's Guide .......................................................................................................... 3
Document Conventions............................................................................................................ 5
Safety Warnings........................................................................................................................ 7
Contents Overview ................................................................................................................... 9
Table of Contents.................................................................................................................... 11
Part I: User’s Guide................................................................................ 19
Chapter 1
Introduction ............................................................................................................................. 21
1.1 Overview .............................................................................................................................. 21
1.2 Ways to Manage the ZyXEL Device .................................................................................... 21
1.3 Good Habits for Managing the ZyXEL Device ..................................................................... 22
1.4 Applications for the ZyXEL Device ...................................................................................... 22
1.4.1 Internet Access .......................................................................................................... 22
1.5 Wireless Access .................................................................................................................. 23
1.5.1 Using the WPS/WLAN Button .................................................................................... 24
1.6 LEDs (Lights) ....................................................................................................................... 25
1.7 The RESET Button .............................................................................................................. 26
1.7.1 Using the Reset Button .............................................................................................. 26
Chapter 2
The Web Configurator ............................................................................................................ 27
2.1 Overview .............................................................................................................................. 27
2.1.1 Accessing the Web Configurator ................................................................................ 27
2.2 The Main Screen ................................................................................................................. 29
2.2.1 Title Bar ...................................................................................................................... 30
2.2.2 Navigation Panel ........................................................................................................ 30
2.2.3 Main Window .............................................................................................................. 32
2.2.4 Status Bar ................................................................................................................... 32
Chapter 3
Status Screens ........................................................................................................................ 33
3.1 Overview .............................................................................................................................. 33
P-660HN-T1h User’s Guide
11
Table of Contents
3.2 The Status Screen ............................................................................................................... 33
Chapter 4
Tutorials ................................................................................................................................... 37
4.1 Overview .............................................................................................................................. 37
4.2 Setting Up a Secure Wireless Network ............................................................................... 37
4.2.1 Configuring the Wireless Network Settings ................................................................ 38
4.2.2 Using WPS ................................................................................................................. 39
4.2.3 Without WPS .............................................................................................................. 44
4.2.4 Setting Up Wireless Network Scheduling ................................................................... 44
4.3 Configuring the MAC Address Filter .................................................................................... 45
4.4 Configuring Static Route for Routing to Another Network ................................................... 47
4.5 Multiple Public and Private IP Address Mappings ............................................................... 50
4.5.1 Full Feature NAT + Many-to-Many No Overload Mapping ......................................... 51
4.5.2 Full Feature NAT + One-to-One Mapping .................................................................. 52
4.6 Multiple WAN Connections Example ................................................................................... 53
Part II: Technical Reference .................................................................. 55
Chapter 5
Internet and Wireless Setup Wizard...................................................................................... 57
5.1 Overview .............................................................................................................................. 57
5.2 Internet Access Wizard Setup ............................................................................................. 57
5.2.1 Manual Configuration ................................................................................................. 60
5.3 Wireless Connection Wizard Setup ..................................................................................... 66
5.3.1 Manually Assign a WPA-PSK key .............................................................................. 68
5.3.2 Manually Assign a WEP Key ...................................................................................... 69
Chapter 6
WAN Setup............................................................................................................................... 71
6.1 Overview .............................................................................................................................. 71
6.1.1 What You Can Do in the WAN Screens ..................................................................... 71
6.1.2 What You Need to Know About WAN ........................................................................ 71
6.1.3 Before You Begin ....................................................................................................... 72
6.2 The Internet Access Setup Screen ...................................................................................... 73
6.2.1 Advanced Internet Access Setup ............................................................................... 75
6.3 The More Connections Screen ............................................................................................ 77
6.3.1 More Connections Edit ............................................................................................... 78
6.3.2 Configuring More Connections Advanced Setup ....................................................... 80
6.4 WAN Technical Reference ................................................................................................... 81
6.4.1 Encapsulation ............................................................................................................. 81
12
P-660HN-T1h User’s Guide
Table of Contents
6.4.2 Multiplexing ................................................................................................................ 83
6.4.3 VPI and VCI ............................................................................................................... 83
6.4.4 IP Address Assignment .............................................................................................. 83
6.4.5 Nailed-Up Connection (PPP) ..................................................................................... 84
6.4.6 NAT ............................................................................................................................ 84
6.5 Traffic Shaping ..................................................................................................................... 84
6.5.1 ATM Traffic Classes ................................................................................................... 85
Chapter 7
LAN Setup................................................................................................................................ 87
7.1 Overview .............................................................................................................................. 87
7.1.1 What You Can Do in the LAN Screens ....................................................................... 87
7.1.2 What You Need To Know About LAN ......................................................................... 88
7.1.3 Before You Begin ....................................................................................................... 89
7.2 The LAN IP Screen .............................................................................................................. 89
7.2.1 The Advanced LAN IP Setup Screen ......................................................................... 90
7.3 The DHCP Setup Screen .................................................................................................... 91
7.4 The Client List Screen ......................................................................................................... 92
7.5 The IP Alias Screen ............................................................................................................. 93
7.5.1 Configuring the LAN IP Alias Screen ......................................................................... 94
7.6 LAN Technical Reference .................................................................................................... 95
7.6.1 LANs, WANs and the ZyXEL Device .......................................................................... 96
7.6.2 DHCP Setup ............................................................................................................... 96
7.6.3 DNS Server Addresses .............................................................................................. 96
7.6.4 LAN TCP/IP ................................................................................................................ 97
7.6.5 RIP Setup ................................................................................................................... 98
7.6.6 Multicast ..................................................................................................................... 99
Chapter 8
Wireless LAN......................................................................................................................... 101
8.1 Overview ............................................................................................................................ 101
8.1.1 What You Can Do in the Wireless LAN Screens ...................................................... 101
8.1.2 What You Need to Know About Wireless ................................................................. 102
8.1.3 Before You Start ....................................................................................................... 102
8.2 The AP Screen .................................................................................................................. 103
8.2.1 No Security ............................................................................................................... 104
8.2.2 WEP Encryption ....................................................................................................... 105
8.2.3 WPA(2)-PSK ............................................................................................................ 106
8.2.4 WPA(2) Authentication ............................................................................................. 107
8.2.5 Wireless LAN Advanced Setup ................................................................................ 108
8.2.6 MAC Filter
.............................................................................................................110
8.3 The More AP Screen ..........................................................................................................111
8.3.1 More AP Edit .............................................................................................................112
P-660HN-T1h User’s Guide
13
Table of Contents
8.4 The WPS Screen ................................................................................................................113
8.5 The WPS Station Screen ....................................................................................................114
8.6 The WDS Screen ................................................................................................................115
8.7 The Scheduling Screen ......................................................................................................117
8.8 Wireless LAN Technical Reference ....................................................................................118
8.8.1 Wireless Network Overview ......................................................................................118
8.8.2 Additional Wireless Terms ........................................................................................ 120
8.8.3 Wireless Security Overview ..................................................................................... 120
8.8.4 Signal Problems ....................................................................................................... 123
8.8.5 BSS .......................................................................................................................... 123
8.8.6 MBSSID ................................................................................................................... 124
8.8.7 Wireless Distribution System (WDS) ........................................................................ 125
8.8.8 WiFi Protected Setup (WPS) .................................................................................... 125
Chapter 9
Network Address Translation (NAT).................................................................................... 133
9.1 Overview ............................................................................................................................ 133
9.1.1 What You Can Do in the NAT Screens ..................................................................... 133
9.1.2 What You Need To Know About NAT ....................................................................... 133
9.2 The NAT General Setup Screen ........................................................................................ 135
9.3 The Port Forwarding Screen ............................................................................................. 136
9.3.1 Configuring the Port Forwarding Screen .................................................................. 137
9.3.2 The Port Forwarding Rule Edit Screen .................................................................... 139
9.4 The Address Mapping Screen ........................................................................................... 140
9.4.1 The Address Mapping Rule Edit Screen .................................................................. 142
9.5 The ALG Screen ................................................................................................................ 143
9.6 NAT Technical Reference .................................................................................................. 144
9.6.1 NAT Definitions ........................................................................................................ 144
9.6.2 What NAT Does ....................................................................................................... 144
9.6.3 How NAT Works ....................................................................................................... 145
9.6.4 NAT Application ........................................................................................................ 146
9.6.5 NAT Mapping Types ................................................................................................. 146
Chapter 10
Firewall................................................................................................................................... 149
10.1 Overview .......................................................................................................................... 149
10.1.1 What You Can Do in the Firewall Screens ............................................................. 149
10.1.2 What You Need to Know About Firewall ................................................................ 149
10.2 The Firewall Screen ......................................................................................................... 151
Chapter 11
Filters ..................................................................................................................................... 153
11.1 Overview ......................................................................................................................... 153
14
P-660HN-T1h User’s Guide
Table of Contents
11.1.1 What You Can Do in the Filter Screens .................................................................. 153
11.1.2 What You Need to Know About Filtering ................................................................ 153
11.2 The URL Filter Screen .................................................................................................... 154
11.3 The Application Filter Screen ........................................................................................... 155
11.4 The IP/MAC Filter Screen ................................................................................................ 156
Chapter 12
Static Route ........................................................................................................................... 159
12.1 Overview ......................................................................................................................... 159
12.1.1 What You Can Do in the Static Route Screens ...................................................... 160
12.2 The Static Route Screen .................................................................................................. 160
12.2.1 Static Route Edit ................................................................................................... 161
Chapter 13
802.1Q/1P............................................................................................................................... 163
13.1 Overview .......................................................................................................................... 163
13.1.1 What You Can Do in the 802.1Q/1P Screens ........................................................ 163
13.1.2 What You Need to Know About 802.1Q/1P ........................................................... 163
13.2 The 802.1Q/1P Group Setting Screen ............................................................................. 164
13.2.1 Editing 802.1Q/1P Group Setting ........................................................................... 166
13.3 The 802.1Q/1P Port Setting Screen ................................................................................ 167
Chapter 14
Quality of Service (QoS)....................................................................................................... 169
14.1 Overview .......................................................................................................................... 169
14.1.1 What You Can Do in the QoS Screens .................................................................. 170
14.1.2 What You Need to Know About QoS ..................................................................... 170
14.2 The QoS Screen ............................................................................................................. 171
14.2.1 The QoS Settings Summary Screen ...................................................................... 173
14.3 QoS Technical Reference ................................................................................................ 174
14.3.1 IEEE 802.1p ........................................................................................................... 174
14.3.2 IP Precedence ........................................................................................................ 175
14.3.3 Automatic Priority Queue Assignment ................................................................... 175
Chapter 15
Dynamic DNS Setup ............................................................................................................. 177
15.1 Overview .......................................................................................................................... 177
15.1.1 What You Can Do in the DDNS Screen ................................................................. 177
15.1.2 What You Need To Know About DDNS .................................................................. 177
15.2 The Dynamic DNS Screen .............................................................................................. 178
Chapter 16
Remote Management............................................................................................................ 179
P-660HN-T1h User’s Guide
15
Table of Contents
16.1 Overview .......................................................................................................................... 179
16.1.1 What You Can Do in the Remote Management Screens ....................................... 180
16.1.2 What You Need to Know About Remote Management .......................................... 180
16.2 The WWW Screen ........................................................................................................... 181
16.2.1 Configuring the WWW Screen ............................................................................... 181
16.3 The Telnet Screen ........................................................................................................... 182
16.4 The FTP Screen .............................................................................................................. 183
16.5 The SNMP Screen ........................................................................................................... 184
16.5.1 Configuring SNMP ................................................................................................. 185
16.6 The DNS Screen ............................................................................................................ 186
16.7 The ICMP Screen ............................................................................................................ 187
Chapter 17
Universal Plug-and-Play (UPnP).......................................................................................... 189
17.1 Overview .......................................................................................................................... 189
17.1.1 What You Can Do in the UPnP Screen .................................................................. 189
17.1.2 What You Need to Know About UPnP ................................................................... 189
17.2 The UPnP Screen ............................................................................................................ 191
17.3 Installing UPnP in Windows Example .............................................................................. 192
17.4 Using UPnP in Windows XP Example ............................................................................. 195
Chapter 18
CWMP..................................................................................................................................... 201
18.1 Overview .......................................................................................................................... 201
18.2 The CWMP Setup Screen ............................................................................................... 202
Chapter 19
System Settings .................................................................................................................... 205
19.1 Overview .......................................................................................................................... 205
19.1.1 What You Can Do in the System Settings Screens ................................................ 205
19.2 The General Screen ........................................................................................................ 205
19.3 The Time and Date Screen ............................................................................................. 206
Chapter 20
Logs ....................................................................................................................................... 209
20.1 Overview .......................................................................................................................... 209
20.1.1 What You Need To Know About Logs .................................................................... 209
20.2 The System Log Screen .................................................................................................. 209
20.3 Log Descriptions ...............................................................................................................211
Chapter 21
Tools....................................................................................................................................... 219
21.1 Overview .......................................................................................................................... 219
16
P-660HN-T1h User’s Guide
Table of Contents
21.1.1 What You Can Do in the Tool Screens ................................................................... 219
21.2 The Firmware Screen ...................................................................................................... 219
21.3 The Configuration Screen ................................................................................................ 222
21.4 The Restart Screen ......................................................................................................... 225
Chapter 22
Diagnostic.............................................................................................................................. 227
22.1 Overview .......................................................................................................................... 227
22.1.1 What You Can Do in the Diagnostic Screens ......................................................... 227
22.2 The General Screen ........................................................................................................ 227
22.3 The DSL Line Screen ...................................................................................................... 228
Chapter 23
Troubleshooting.................................................................................................................... 231
23.1 Power, Hardware Connections, and LEDs ...................................................................... 231
23.2 ZyXEL Device Access and Login .................................................................................... 232
23.3 Internet Access ................................................................................................................ 234
Chapter 24
Product Specifications ......................................................................................................... 237
24.1 Hardware Specifications .................................................................................................. 237
24.2 Firmware Specifications ................................................................................................... 237
24.3 Wireless Features ............................................................................................................ 241
24.4 Power Adaptor Specifications .......................................................................................... 244
Appendix A Setting up Your Computer’s IP Address............................................................ 245
Appendix B IP Addresses and Subnetting ........................................................................... 269
Appendix C Pop-up Windows, JavaScripts and Java Permissions ...................................... 279
Appendix D Wireless LANs .................................................................................................. 289
Appendix E Services ............................................................................................................ 305
Appendix F Legal Information .............................................................................................. 309
Index....................................................................................................................................... 313
P-660HN-T1h User’s Guide
17
Table of Contents
18
P-660HN-T1h User’s Guide
P ART I
User’s Guide
19
20
CHAPTER
Introduction
1.1 Overview
The P-660HN-T1h is an ADSL2+ router. By integrating DSL and NAT, you are
provided with ease of installation and high-speed, shared Internet access. The P660HN-T1h is also a complete security solution with a robust firewall and content
filtering.
Please refer to the following description of the product name format.
• “H” denotes an integrated 4-port hub (switch).
• “N” denotes 802.11n draft 2.0. The “N” models support 802.11n wireless
connection mode.
• Models ending in “1”, for example P-660HN-T1, denote a device that works over
the analog telephone system, POTS (Plain Old Telephone Service). Models
ending in “3” denote a device that works over ISDN (Integrated Services Digital
Network) or T-ISDN (UR-2).
Only use firmware for your ZyXEL Device’s specific model. Refer
to the label on the bottom of your ZyXEL Device.
Note: All screens displayed in this user’s guide are from the P-660HN-T1h model.
See the product specifications for a full list of features.
1.2 Ways to Manage the ZyXEL Device
Use any of the following methods to manage the ZyXEL Device.
• Web Configurator. This is recommended for everyday management of the ZyXEL
Device using a (supported) web browser.
• Command Line Interface. Line commands are mostly used for troubleshooting
by service engineers.
• FTP for firmware upgrades and configuration backup/restore.
P-660HN-T1h User’s Guide
21
Chapter 1 Introduction
• TR-069. This is an auto-configuration server used to remotely configure your
device.
1.3 Good Habits for Managing the ZyXEL Device
Do the following things regularly to make the ZyXEL Device more secure and to
manage the ZyXEL Device more effectively.
• Change the password. Use a password that’s not easy to guess and that consists
of different types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it).
Restoring an earlier working configuration may be useful if the device becomes
unstable or even crashes. If you forget your password, you will have to reset the
ZyXEL Device to its factory default settings. If you backed up an earlier
configuration file, you would not have to totally re-configure the ZyXEL Device.
You could simply restore your last configuration.
1.4 Applications for the ZyXEL Device
Here are some example uses for which the ZyXEL Device is well suited.
1.4.1 Internet Access
Your ZyXEL Device provides shared Internet access by connecting the DSL port to
the DSL or MODEM jack on a splitter or your telephone jack. Computers can
connect to the ZyXEL Device’s LAN ports (or wirelessly).
Figure 1 ZyXEL Device’s Router Features
LAN
DSL
22
P-660HN-T1h User’s Guide
Chapter 1 Introduction
You can also configure firewall and filtering feature on the ZyXEL Device for secure
Internet access. When the firewall is on, all incoming traffic from the Internet to
your network is blocked unless it is initiated from your network. This means that
probes from the outside to your network are not allowed, but you can safely
browse the Internet and download files.
Use the filtering feaure to block access to specific web sites or Internet
applications such as MSN or Yahoo Messanger. You can also configure IP/MAC
filtering rules for incoming or outgoing traffic.
Use QoS to efficiently manage traffic on your network by giving priority to certain
types of traffic and/or to particular computers. For example, you could make sure
that the ZyXEL Device gives voice over Internet calls high priority, and/or limit
bandwidth devoted to the boss’ excessive file downloading.
1.5 Wireless Access
The ZyXEL Device is a wireless Access Point (AP) for wireless clients, such as
notebook computers or PDAs and iPads. It allows them to connect to the Internet
without having to rely on inconvenient Ethernet cables.
You can configure your wireless network in either the built-in Web Configurator, or
using the WPS button.
Figure 2 Wireless Access Example
However, before you can use this ZyXEL Device to create a wireless network, you
must set its country code first in the Web Configurator. This is very important.
To set the wireless country code:
Log into the ZyXEL Device’s built-in Web Configurator. See Chapter 8 on page 103.
Open the Network > Wireless LAN > AP screen.
P-660HN-T1h User’s Guide
23
Chapter 1 Introduction
Select your country from the Channel Selection list. See Section 8.2 on page
105 for details.
Click Apply to save your changes.
Finally, open the Internet and Wireless Configuration wizards to set up your
network. See Chapter 5 on page 59.
1.5.1 Using the WPS/WLAN Button
By default, the wireless network is turned off on the ZyXEL Device. To turn it on,
simply press the WPS/WLAN button on top of the device for 1 second. Once the
WPS/WLAN LED turns green, the wireless network is active.
You can also use the WPS/WLAN button to quickly set up a secure wireless
connection between the ZyXEL Device and a WPS-compatible client by adding one
device at a time.
To activate WPS:
24
Make sure the POWER LED is on and not blinking.
Press the WPS/WLAN button for five to ten seconds and release it.
Press the WPS button on another WPS-enabled device within range of the ZyXEL
Device. The WPS/WLAN LED should flash while the ZyXEL Device sets up a WPS
connection with the other wireless device.
Once the connection is successfully made, the WPS/WLAN LEd shines green.
P-660HN-T1h User’s Guide
Chapter 1 Introduction
1.6 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 3 LEDs
None of the LEDs are on if the ZyXEL Device is not receiving power.
Table 1 LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
Green
On
The ZyXEL Device is receiving power and ready for
use.
Blinking
The ZyXEL Device is self-testing.
On
The ZyXEL Device detected an error while self-testing,
or there is a device malfunction.
Off
The ZyXEL Device is not receiving power.
On
The ZyXEL Device has an Ethernet connection with a
device on the Local Area Network (LAN).
Blinking
The ZyXEL Device is sending/receiving data to /from
the LAN.
Off
The ZyXEL Device does not have an Ethernet
connection with the LAN.
On
The wireless network is activated.
Blinking
The ZyXEL Device is communicating with other
wireless clients.
Blinking
The ZyXEL Device is setting up a WPS connection.
Off
The wireless network is not activated.
On
The DSL line is up.
Blinking
The ZyXEL Device is initializing the DSL line.
Off
The DSL line is down.
(POWER)
Red
LAN 1-4
Green
Green
(WPS/
WLAN)
Orange
Green
(DSL)
P-660HN-T1h User’s Guide
25
Chapter 1 Introduction
Table 1 LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
Green
On
The ZyXEL Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or
assigned by a DHCP server), PPP negotiation was
successfully completed (if used) and the DSL
connection is up.
(INTERNET)
Red
Blinking
The ZyXEL Device is sending or receiving IP traffic.
On
The ZyXEL Device attempted to make an IP
connection but failed. Possible causes are no response
from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Off
The ZyXEL Device does not have an IP connection.
Refer to the Quick Start Guide for information on hardware connections.
1.7 The RESET Button
If you forget your password or cannot access the web configurator, you will need
to use the RESET button at the back of the device to reload the factory-default
configuration file. This means that you will lose all configurations that you had
previously and the password will be reset to “1234”.
1.7.1 Using the Reset Button
26
Make sure the POWER LED is on (not blinking).
To set the device back to the factory default settings, press the RESET button for
ten seconds or until the POWER LED begins to blink and then release it. When the
POWER LED begins to blink, the defaults have been restored and the device
restarts.
P-660HN-T1h User’s Guide
CHAPTER
The Web Configurator
2.1 Overview
The web configurator is an HTML-based management interface that allows easy
device setup and management via Internet browser. Use Internet Explorer 6.0 and
later or Netscape Navigator 7.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Appendix C on page 279 if you need to make sure these functions are allowed
in Internet Explorer.
2.1.1 Accessing the Web Configurator
Make sure your ZyXEL Device hardware is properly connected (refer to the Quick
Start Guide).
Launch your web browser.
Type "192.168.1.1" as the URL.
P-660HN-T1h User’s Guide
27
Chapter 2 The Web Configurator
A password screen displays. To access the administrative web configurator and
manage the ZyXEL Device, type the admin password (1234 by default) in the
password screen and click Login. Click Cancel to revert to the default user
password in the password field. If you have changed the password, enter your
password and click Login.
Figure 4 Password Screen
The following screen displays if you have not yet changed your password. It is
strongly recommended you change the default password. Enter a new password,
retype it to confirm and click Apply; alternatively click Ignore to proceed to the
main menu if you do not want to change the password now.
Figure 5 Change Password Screen
28
P-660HN-T1h User’s Guide
Chapter 2 The Web Configurator
Select Go to Wizard setup and click Apply to display the wizard main screen.
Otherwise, select Go to Advanced setup and click Apply to display the Status
screen.
Figure 6 Replace Factory Default Certificate Screen
Note: For security reasons, the ZyXEL Device automatically logs you out if you do not
use the web configurator for five minutes (default). If this happens, log in again.
2.2 The Main Screen
Figure 7 Main Screen
P-660HN-T1h User’s Guide
29
Chapter 2 The Web Configurator
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar
2.2.1 Title Bar
The title bar provides some icons in the upper right corner.
The icons provide the following functions.
Table 2 Web Configurator Icons in the Title Bar
ICON
DESCRIPTION
Wizards: Click this icon to go to the configuration wizards. See Chapter
5 on page 57 for more information.
Logout: Click this icon to log out of the web configurator.
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
TAB
Status
FUNCTION
This screen shows the ZyXEL Device’s general device and network
status information. Use this screen to access the statistics and
client list.
Network
WAN
LAN
30
Internet
Access Setup
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
IP
Use this screen to configure LAN TCP/IP settings, and other
advanced properties.
DHCP Setup
Use this screen to configure LAN DHCP settings and DNS server.
Client List
Use this screen to view current DHCP client information and to
always assign specific IP addresses to individual MAC addresses
(and host names).
IP Alias
Use this screen to partition your LAN interface into subnets.
P-660HN-T1h User’s Guide
Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary
LINK
Wireless LAN
NAT
TAB
FUNCTION
AP
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP
Use this screen to configure multiple BSSs on the ZyXEL Device.
WPS
Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WPS Station
Use this screen to set up a WPS wireless network.
WDS
Use this screen to set up Wireless Distribution System links to
other access points.
Scheduling
Use this screen to configure the dates/times to enable or disable
the wireless LAN.
General
Use this screen to enable NAT.
Port
Forwarding
Use this screen to make your local servers visible to the outside
world.
ALG
Use this screen to enable or disable SIP ALG.
Security
Firewall
Filter
Use this screen to activate/deactivate the firewall and SPI
(Security Parameter Index).
URL Filter
Use this screen to block access to certain URL web sites.
Application
Filter
Use this screen to allow or block traffic from certain applications.
IP/MAC Filter
Use this screen to configure IP/MAC filtering rules for incoming or
outgoing traffic.
Advanced
Static Route
802.1Q/1P
QoS
Use this screen to configure IP static routes to tell your device
about networks beyond the directly connected remote nodes.
Group Setting
Use this screen to activate 802.1Q/1P, specify the management
VLAN group, display the VLAN groups and configure the settings
for each VLAN group.
Port Setting
Use this screen to configure the PVID and assign traffic priority for
each port.
General
Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Dynamic DNS
Remote
MGMT
This screen allows you to use a static hostname alias for a
dynamic IP address.
WWW
Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the ZyXEL
Device.
Telnet
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the ZyXEL
Device.
FTP
Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyXEL
Device.
P-660HN-T1h User’s Guide
31
Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary
LINK
UPnP
TAB
FUNCTION
SNMP
Use this screen to configure through which interface(s) and from
which IP address(es) users can access the SNMP agent on the
ZyXEL Device.
DNS
Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyXEL
Device.
ICMP
Use this screen to set whether or not your device will respond to
pings and probes for services that you have not made available.
General
Use this screen to turn UPnP on or off.
CWMP
Use this screen to have a management server manage the ZyXEL
Device.
Maintenance
System
General
Use this screen to configure your device’s password.
Time and Date
Use this screen to change your ZyXEL Device’s time and date.
Logs
System Log
Use this screen to select which logs your device is to record.
Tools
Firmware
Use this screen to upload firmware to your device.
Configuration
Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Restart
This screen allows you to reboot the ZyXEL Device without turning
the power off.
General
Use this screen to test the connections to other devices.
DSL Line
This screen displays information to help you identify problems
with the DSL connection.
Diagnostic
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in
the rest of this document.
Right after you log in, the Status screen is displayed. See Chapter 3 on page 33
for more information about the Status screen.
2.2.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration
has been updated.
32
P-660HN-T1h User’s Guide
CHAPTER
Status Screens
3.1 Overview
Use the Status screens to look at the current status of the device, system
resources, and interfaces (LAN and WAN). The Status screen also provides
detailed information from DHCP and statistics from bandwidth management, and
traffic.
3.2 The Status Screen
Use this screen to view the status of the ZyXEL Device. Click Status to open this
screen.
Figure 8 Status Screen
P-660HN-T1h User’s Guide
33
Chapter 3 Status Screens
Each field is described in the following table.
Table 4 Status Screen
LABEL
DESCRIPTION
Refresh Interval Select how often you want the ZyXEL Device to update this screen.
Apply
Click this to update this screen immediately.
Device Information
Host Name
This field displays the ZyXEL Device system name. It is used for
identification.
Model
Number
This is the model name of your device.
MAC
Address
This is the MAC (Media Access Control) or Ethernet address unique to
your ZyXEL Device.
ZyNOS
Firmware
Version
This is the current version of the firmware inside the device. Click this
to go to the screen where you can change it.
DSL
Firmware
Version
This is the current version of the device’s DSL modem code.
WAN Information
DSL Mode
This is the DSL standard that your ZyXEL Device is using.
IP Address
This is the current IP address of the ZyXEL Device in the WAN. Click this
to go to the screen where you can change it.
IP Subnet
Mask
This is the current subnet mask in the WAN.
Default
Gateway
This is the IP address of the default gateway, if applicable.
VPI/VCI
This is the Virtual Path Identifier and Virtual Channel Identifier that you
entered in the wizard or WAN screen.
LAN Information
IP Address
This is the current IP address of the ZyXEL Device in the LAN. Click this
to go to the screen where you can change it.
IP Subnet
Mask
This is the current subnet mask in the LAN.
DHCP
This field displays what DHCP services the ZyXEL Device is providing to
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
WLAN Information
ESSID
34
This is the descriptive name used to identify the ZyXEL Device in a
wireless LAN. Click this to go to the screen where you can change it.
P-660HN-T1h User’s Guide
Chapter 3 Status Screens
Table 4 Status Screen
LABEL
DESCRIPTION
Channel
This is the channel number used by the ZyXEL Device now.
Security
This displays the type of security mode the ZyXEL Device is using in the
wireless LAN.
WPS
This displays whether WPS is activated. Click this to go to the screen
where you can configure the settings.
Status
This displays whether WLAN is activated.
Security
Firewall
This displays whether or not the ZyXEL Device’s firewall is activated.
Click this to go to the screen where you can change it.
System Status
System
Uptime
This field displays how long the ZyXEL Device has been running since it
last started up. The ZyXEL Device starts up when you plug it in, when
you restart it (Maintenance > Tools > Restart), or when you reset it.
Current
Date/Time
This field displays the current date and time in the ZyXEL Device. You
can change this in Maintenance > System > Time Setting.
System
Mode
This displays whether the ZyXEL Device is functioning as a router or a
bridge.
CPU Usage
This field displays what percentage of the ZyXEL Device’s processing
ability is currently used. When this percentage is close to 100%, the
ZyXEL Device is running at full load, and the throughput is not going to
improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using
QoS; see Chapter 14 on page 169).
Memory
Usage
This field displays what percentage of the ZyXEL Device’s memory is
currently used. Usually, this percentage should not increase much. If
memory usage does get close to 100%, the ZyXEL Device is probably
becoming unstable, and you should restart the device. See Section 21.4
on page 225, or turn off the device (unplug the power) for a few
seconds.
Interface Status
Interface
P-660HN-T1h User’s Guide
This column displays each interface the ZyXEL Device has.
35
Chapter 3 Status Screens
Table 4 Status Screen
LABEL
DESCRIPTION
Status
This field indicates whether or not the ZyXEL Device is using the
interface.
For the DSL interface, this field displays Down (line is down), Up (line
is up or connected) if you're using Ethernet encapsulation and Down
(line is down), Up (line is up or connected), Idle (line (ppp) idle), Dial
(starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE encapsulation.
For the LAN interface, this field displays Up when the ZyXEL Device is
using the interface and Down when the ZyXEL Device is not using the
interface.
For the WLAN interface, it displays Active when WLAN is enabled or
InActive when WLAN is disabled.
Rate
For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream
transmission rate.
For the WLAN interface, it displays the maximum transmission rate
when WLAN is enabled or N/A when WLAN is disabled.
36
P-660HN-T1h User’s Guide
CHAPTER
Tutorials
4.1 Overview
This chapter shows you how to use the ZyXEL Device’s various features.
• Setting Up a Secure Wireless Network, see page 37
• Configuring the MAC Address Filter, see page 45
• Configuring Static Route for Routing to Another Network, see page 47
• Multiple Public and Private IP Address Mappings, see page 50
• Multiple WAN Connections Example, see page 53
4.2 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to
access the Internet. In this wireless network, the ZyXEL Device serves as an
access point (AP), and the notebook is the wireless client. The wireless client can
access the Internet through the AP.
Thomas has to configure the wireless network settings on the ZyXEL Device. Then
he can set up a wireless network using WPS (Section 4.2.2 on page 39) or manual
configuration (Section 4.2.3 on page 44).
P-660HN-T1h User’s Guide
37
Chapter 4 Tutorials
4.2.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
38
SSID
Example
Security Mode
WPA-PSK
Pre-Shared Key
DoNotStealMyWirelessNetwork
802.11 Mode
802.11b+g+n
Click Network > Wireless LAN to open the AP screen. Configure the screen
using the provided parameters (see page 38). Click Apply.
Click the Advanced Setup button and select 802.11b+g+n in the 802.11 Mode
field. Click Apply.
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
Thomas can now use the WPS feature to establish a wireless connection between
his notebook and the ZyXEL Device (see Section 4.2.2 on page 39). He can also
use the notebook’s wireless client to search for the ZyXEL Device (see Section
4.2.3 on page 44).
4.2.2 Using WPS
This section shows you how to set up a wireless network using WPS. It uses the
ZyXEL Device as the AP and ZyXEL NWD210N as the wireless client which
connects to the notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB
adapter or PCMCIA card).
There are two WPS methods to set up the wireless client settings:
• Push Button Configuration (PBC) - simply press a button. This is the easier
of the two methods.
• PIN Configuration - configure a Personal Identification Number (PIN) on the
ZyXEL Device. A wireless client must also use the same PIN in order to
download the wireless network settings from the ZyXEL Device.
Push Button Configuration (PBC)
Make sure that your ZyXEL Device is turned on and your notebook is within the
cover range of the wireless signal.
Make sure that you have installed the wireless client driver and utility in your
notebook.
In the wireless client utility, go to the WPS setting page. Enable WPS and press
the WPS button (Start or WPS button).
P-660HN-T1h User’s Guide
39
Chapter 4 Tutorials
Push and hold the WPS button located on the ZyXEL Device’s rear panel for more
than 5 seconds. Alternatively, you may log into ZyXEL Device’s web configurator
and click the Push Button in the Network > Wireless LAN > WPS Station
screen.
Note: Your ZyXEL Device has a WPS button located on its rear panel as well as a
WPS button in its configuration utility. Both buttons have exactly the same
function: you can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The ZyXEL Device sends the proper configuration settings to the wireless client.
This may take up to two minutes. The wireless client is then able to communicate
with the ZyXEL Device securely.
40
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
The following figure shows you an example of how to set up a wireless network
and its security by pressing a button on both ZyXEL Device and wireless client.
Example WPS Process: PBC Method
ZyXEL Device
Wireless Client
WITHIN 2 MINUTES
Press and hold for
5 seconds
SECURITY INFO
COMMUNICATION
P-660HN-T1h User’s Guide
41
Chapter 4 Tutorials
PIN Configuration
When you use the PIN configuration method, you need to use both the ZyXEL
Device’s web configurator and the wireless client’s utility.
Launch your wireless client’s configuration utility. Go to the WPS settings and
select the PIN method to get a PIN number.
Enter the PIN number in the PIN field in the Network > Wireless LAN > WPS
Station screen on the ZyXEL Device.
Click the Start buttons (or the button next to the PIN field) on both the wireless
client utility screen and the ZyXEL Device’s WPS Station screen within two
minutes.
The ZyXEL Device authenticates the wireless client and sends the proper
configuration settings to the wireless client. This may take up to two minutes. The
wireless client is then able to communicate with the ZyXEL Device securely.
42
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
The following figure shows you how to set up a wireless network and its security
on a ZyXEL Device and a wireless client by using PIN method.
Example WPS Process: PIN Method
Wireless Client
ZyXEL Device
WITHIN 2 MINUTES
Authentication by PIN
SECURITY INFO
COMMUNICATION
P-660HN-T1h User’s Guide
43
Chapter 4 Tutorials
4.2.3 Without WPS
Use the wireless adapter’s utility installed on the notebook to search for the
“Example” SSID. Then enter the “DoNotStealMyWirelessNetwork” pre-shared key
to establish an wireless Internet connection.
Note: The ZyXEL Device supports IEEE 802.11b and IEEE 802.11g wireless clients.
Make sure that your notebook or computer’s wireless adapter supports one of
these standards.
4.2.4 Setting Up Wireless Network Scheduling
Thomas mostly uses his notebook to access the Internet on weekends;
occasionally he uses it at night on weekdays. Here is how Thomas can set up a
schedule to turn on the wireless network at specific time and days.
44
Click Network > Wireless Network > Scheduling to open the following screen.
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
Configure the screen as follows. Turn on the wireless network from Mondays to
Fridays between 18:00 and 23:30. Turn on the wireless network all day on
Saturdays and Sundays. Click Apply.
4.3 Configuring the MAC Address Filter
Thomas noticed that his daughter Josephine spends too much time surfing the
web and downloading media files. He decided to prevent Josephine from accessing
the Internet so that she can concentrate on preparing for her final exams.
Josephine’s computer connects wirelessly to the Internet through the ZyXEL
Device. Thomas can deny access to the wireless network using the MAC address of
Josephine’s computer.
Thomas
Josephine
P-660HN-T1h User’s Guide
45
Chapter 4 Tutorials
46
Click Network > LAN > Client List to open the following screen. Look for the
MAC address of Josephine’s computer.
Click Network > Wireless LAN to open the AP screen. Click the Edit button in
the MAC Filter field.
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
Select Active MAC Filter and Deny Filter Action. Enter the MAC address you
found in the Client List screen. Click Apply.
Josephine will no longer be able to access the Internet through the ZyXEL Device.
4.4 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the ZyXEL Device’s LAN. The router may be used to separate
two department networks. This tutorial shows how to configure a static routing
rule for two network routings.
In the following figure, router R is connected to the ZyXEL Device’s LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If
you want to send traffic from computer A (in N1 network) to computer B (in N2
P-660HN-T1h User’s Guide
47
Chapter 4 Tutorials
network), the traffic is sent to the ZyXEL Device’s WAN default gateway by
default. In this case, B will never receive the traffic.
N1
N2
You need to specify a static routing rule on the ZyXEL Device to specify R as the
router in charge of forwarding traffic to N2. In this case, the ZyXEL Device routes
traffic from A to R and then R routes the traffic to B.
N1
N2
This tutorial uses the following example IP settings:
Table 5 IP Settings in this Tutorial
48
DEVICE / COMPUTER
IP ADDRESS
The ZyXEL Device’s WAN
172.16.1.1
The ZyXEL Device’s LAN
192.168.1.1
192.168.1.34
R’s N1
192.168.1.253
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER
IP ADDRESS
R’s N2
192.168.10.2
192.168.10.33
To configure a static route to route traffic from N1 to N2:
Log into the ZyXEL Device’s Web Configurator in advanced mode.
Click Advanced > Static Route.
Click Edit on a new rule in the Static Route screen.
Configure the Static Route Setup screen using the following settings:
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination,
N2.
4b
Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4a
Click Apply.
Now B should be able to receive traffic from A. You may need to additionally
configure B’s firewall settings to allow specific traffic to pass through.
P-660HN-T1h User’s Guide
49
Chapter 4 Tutorials
4.5 Multiple Public and Private IP Address
Mappings
If your ISP gives you more than one static IP address for your Internet access,
you can map each IP address for a specific service. This tutorial assumes you are
given two static public IP addresses. You want to map them to two servers A and
B.
IP-1
IP-2
This tutorial uses the following example settings:
Table 6 IP Settings in this Tutorial
DEVICE / COMPUTER
IP ADDRESS
The ZyXEL Device’s WAN
172.16.1.253 (IP-1)
172.16.1.254 (IP-2)
The ZyXEL Device’s LAN
192.168.1.1
192.168.1.2
192.168.1.3
a.b.c.d
To do this, you can use either of the following settings:
• Full Feature NAT with many-to-many no overload mapping
• Full Feature NAT with one-to-one mapping
50
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
4.5.1 Full Feature NAT + Many-to-Many No Overload Mapping
Use this setting if your applications can use random public IP addresses and the
applications are initiated from the Intranet computers (A and B). For example,
VoIP application. See Section 4.5.2 on page 52 if it is not.
IP-1
To configure this:
Click Network > NAT.
Select Active Network Address Translation(NAT) and Full Feature in the
General screen. Click Apply.
Click the Address Mapping tab, and then click the Edit icon on a new rule.
Configure the rule using the following settings:
• Type: Many-to-Many No Overload
• Local IP addresses: 192.168.1.2 ~ 192.168.1.3
P-660HN-T1h User’s Guide
51
Chapter 4 Tutorials
• Global IP addresses: 172.16.1.253 ~ 172.16.1.254
Then click Apply.
4.5.2 Full Feature NAT + One-to-One Mapping
Use this setting if your applications must use fixed public IP addresses and the
applications can be initiated either from the Intranet computers (A and B) or the
Internet computer (C). For example, gaming application.
IP-1
To configure this setting:
52
Click Network > NAT.
Select Active Network Address Translation(NAT) and Full Feature in the
General screen. Click Apply.
P-660HN-T1h User’s Guide
Chapter 4 Tutorials
Click the Address Mapping tab, click the Edit icon on a new rule.
Configure two rules for the one-to-one mappings:
• Rule 1 (This maps the public IP address 172.16.1.253 to the private IP address
192.168.1.2)
Type: One-to-One
Local Start IP: 192.168.1.2
Global Start IP: 172.16.1.253
• Rule 2 (This maps the public IP address 172.16.1.254 to the private IP address
192.168.1.3)
Type: One-to-One
Local Start IP: 192.168.1.3
Global Start IP: 172.16.1.254
Click Apply on each of the screens.
4.6 Multiple WAN Connections Example
This example shows an application for multiple WAN connections.
Your ISP may configure more than one WAN connection on the ZyXEL Device to
record traffic statistics or calculate service charges.
P-660HN-T1h User’s Guide
53
Chapter 4 Tutorials
In Figure 9, three WAN connections are configured over the ADSL line:
• The connection with VPI/VCI, 0/33, is dedicated for Media-On-Demand (MOD)
service.
• The connection with VPI/VCI, 0/34, is dedicated for VoIP service.
• The connection with VPI/VCI, 0/35, is dedicated for general data transmission.
Figure 9 Example for Multiple WAN Connections
54
P-660HN-T1h User’s Guide
P ART II
Technical Reference
55
56
CHAPTER
Internet and Wireless Setup
Wizard
5.1 Overview
Use the wizard setup screens to configure your system for Internet access with
the information given to you by your ISP.
Note: See the advanced menu chapters for background information on these fields.
5.2 Internet Access Wizard Setup
After you enter the password to access the web configurator, select Go to Wizard
setup and click Apply. Otherwise, click the wizard icon (
) in the top right
corner of the web configurator to go to the wizards.
Figure 10 Select a Mode
P-660HN-T1h User’s Guide
57
Chapter 5 Internet and Wireless Setup Wizard
Click INTERNET/WIRELESS SETUP to configure the system for Internet access
and wireless connection.
Figure 11 Wizard Welcome
Your ZyXEL device attempts to detect your DSL connection and your connection
type.
3a
The following screen appears if a connection is not detected. Check your
hardware connections and click Restart the INTERNET/WIRELESS SETUP
Wizard to return to the wizard welcome screen. If you still cannot connect,
click Manually configure your Internet connection. Follow the directions
in the wizard and enter your Internet setup information as provided to you by
your ISP. See Section 5.2.1 on page 60 for more details.
If you would like to skip your Internet setup and configure the wireless LAN
settings, leave Yes selected and click Next.
Figure 12 Auto Detection: No DSL Connection
58
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
3b
The following screen displays if a PPPoE or PPPoA connection is detected.
Enter your Internet account information (username, password and/or service
name) exactly as provided by your ISP. Then click Next and see Section 5.3 on
page 66 for wireless connection wizard setup.
Figure 13 Auto-Detection: PPPoE
3c
The following screen appears if the ZyXEL device detects a connection but not
the connection type. Click Next and refer to Section 5.2.1 on page 60 on how
to manually configure the ZyXEL Device for Internet access.
Figure 14 Auto Detection: Failed
P-660HN-T1h User’s Guide
59
Chapter 5 Internet and Wireless Setup Wizard
5.2.1 Manual Configuration
If the ZyXEL Device fails to detect your DSL connection type but the physical line
is connected, enter your Internet access information in the wizard screen exactly
as your service provider gave it to you. Leave the defaults in any fields for which
you were not given information.
Figure 15 Internet Access Wizard Setup: ISP Parameters
The following table describes the fields in this screen.
Table 7 Internet Access Wizard Setup: ISP Parameters
LABEL
DESCRIPTION
Mode
Select Routing (default) from the drop-down list box if your ISP give you
one IP address only and you want multiple computers to share an Internet
account. Select Bridge when your ISP provides you more than one IP
address and you want the connected computers to get individual IP
address from ISP’s DHCP server directly. If you select Bridge, you cannot
use Firewall, DHCP server and NAT on the ZyXEL Device.
Encapsulation Select the encapsulation type your ISP uses from the Encapsulation
drop-down list box. Choices vary depending on what you select in the
Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET
ENCAP or PPPoE.
60
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
Table 7 Internet Access Wizard Setup: ISP Parameters
LABEL
DESCRIPTION
Multiplexing
Select the multiplexing method used by your ISP from the Multiplex
drop-down list box either VC-based or LLC-based.
Virtual Circuit
ID
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a
virtual circuit. Refer to the appendix for more information.
VPI
Enter the VPI assigned to you. This field may already be configured.
VCI
Enter the VCI assigned to you. This field may already be configured.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen. The next wizard screen
you see depends on what protocol you chose above.
Exit
Click this to close the wizard screen without saving.
The next wizard screen varies depending on what mode and encapsulation type
you use. All screens shown are with routing mode. Configure the fields and click
Next to continue. See Section 5.3 on page 66 for wireless connection wizard
setup
Figure 16 Internet Connection with PPPoE
P-660HN-T1h User’s Guide
61
Chapter 5 Internet and Wireless Setup Wizard
The following table describes the fields in this screen.
Table 8
LABEL
DESCRIPTION
User Name
Enter the user name exactly as your ISP assigned. If assigned a name in
the form user@domain where domain identifies a service name, then enter
both components exactly as given.
Password
Enter the password associated with the user name above.
Service
Name
Type the name of your PPPoE service here.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Exit
Click this to close the wizard screen without saving.
Figure 17
62
Internet Connection with PPPoE
Internet Connection with RFC 1483
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
The following table describes the fields in this screen.
Table 9 Internet Connection with RFC 1483
LABEL
DESCRIPTION
IP Address
This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Figure 18 Internet Connection with ENET ENCAP
P-660HN-T1h User’s Guide
63
Chapter 5 Internet and Wireless Setup Wizard
The following table describes the fields in this screen.
Table 10 Internet Connection with ENET ENCAP
LABEL
DESCRIPTION
Obtain an IP
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
Address
address is not fixed; the ISP assigns you a different one each time you
Automatically connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP
address.
Static IP
Address
Select Static IP Address if your ISP gave you an IP address to use.
IP Address
Enter your ISP assigned IP address.
Subnet Mask
Enter a subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask If you are implementing
subnetting.
Gateway IP
address
You must specify a gateway IP address (supplied by your ISP) when you
use ENET ENCAP in the Encapsulation field in the previous screen.
First DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
Second DNS
Server
As above.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Exit
Click this to close the wizard screen without saving.
Figure 19 Internet Connection with PPPoA
64
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
The following table describes the fields in this screen.
Table 11 Internet Connection with PPPoA
LABEL
DESCRIPTION
User Name
Enter the login name that your ISP gives you.
Password
Enter the password associated with the user name above.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Exit
Click this to close the wizard screen without saving.
• If the user name and/or password you entered for PPPoE or PPPoA connection
are not correct, the screen displays as shown next. Click Back to Username
and Password setup to go back to the screen where you can modify them.
Figure 20 Connection Test Failed-1
• If the following screen displays, check if your account is activated or click
Restart the Internet/Wireless Setup Wizard to verify your Internet access
settings.
Figure 21 Connection Test Failed-2.
P-660HN-T1h User’s Guide
65
Chapter 5 Internet and Wireless Setup Wizard
5.3 Wireless Connection Wizard Setup
After you configure the Internet access information, use the following screens to
set up your wireless LAN.
Select Yes and click Next to configure wireless settings. Otherwise, select No and
skip to Step 6.
Figure 22 Connection Test Successful
Use this screen to activate the wireless LAN. Click Next to continue.
Figure 23 Wireless LAN Setup Wizard 1
The following table describes the labels in this screen.
Table 12 Wireless LAN Setup Wizard 1
66
LABEL
DESCRIPTION
Active
Select the check box to turn on the wireless LAN.
Back
Click this to return to the previous screen without saving.
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
Table 12 Wireless LAN Setup Wizard 1
LABEL
DESCRIPTION
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Configure your wireless settings in this screen. Click Next.
Figure 24 Wireless LAN
The following table describes the labels in this screen.
Table 13 Wireless LAN Setup Wizard 2
LABEL
DESCRIPTION
Network
Name(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the ZyXEL Device, make sure all wireless
stations use the same SSID in order to access the network.
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g wireless devices is
called a channel. Select a channel ID that is not already in use by a
neighboring device.
Security
Select Manually assign a WPA-PSK key to configure a Pre-Shared Key
(WPA-PSK). Choose this option only if your wireless clients support WPA.
See Section 5.3.1 on page 68 for more information.
Select Manually assign a WEP key to configure a WEP Key. See Section
5.3.2 on page 69 for more information.
Select Disable wireless security to have no wireless LAN security
configured and your network is accessible to any wireless networking
device that is within range.
Back
P-660HN-T1h User’s Guide
Click this to return to the previous screen without saving.
67
Chapter 5 Internet and Wireless Setup Wizard
Table 13 Wireless LAN Setup Wizard 2
LABEL
DESCRIPTION
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
This screen varies depending on the security mode you selected in the previous
screen. Fill in the field (if available) and click Next.
5.3.1 Manually Assign a WPA-PSK key
Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to
set up a Pre-Shared Key.
Figure 25 Manually Assign a WPA-PSK key
The following table describes the labels in this screen.
Table 14 Manually Assign a WPA-PSK key
68
LABEL
DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
secure wireless connection by configuring WPA in the wireless LAN screens.
You need to configure an authentication server to do this.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
P-660HN-T1h User’s Guide
Chapter 5 Internet and Wireless Setup Wizard
5.3.2 Manually Assign a WEP Key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 26 Manually Assign a WEP key
The following table describes the labels in this screen.
Table 15 Manually Assign a WEP key
LABEL
DESCRIPTION
Key
The WEP keys are used to encrypt data. Both the ZyXEL Device and the
wireless stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters
("0-9", "A-F") for a 64-bit or 128-bit WEP key respectively.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Click Apply to save your wireless LAN settings.
Figure 27 Wireless LAN Setup 3
P-660HN-T1h User’s Guide
69
Chapter 5 Internet and Wireless Setup Wizard
Use the read-only summary table to check whether what you have configured is
correct. Click Finish to complete and save the wizard setup.
Note: No wireless LAN settings display if you chose not to configure wireless LAN
settings.
Figure 28 Internet Access and WLAN Wizard Setup Complete
70
Launch your web browser and navigate to www.zyxel.com. Internet access is just
the beginning. Refer to the rest of this guide for more detailed information on the
complete range of ZyXEL Device features. If you cannot access the Internet, open
the web configurator again to confirm that the Internet settings you configured in
the wizard setup are correct.
P-660HN-T1h User’s Guide
CHAPTER
WAN Setup
6.1 Overview
This chapter describes how to configure WAN settings from the WAN screens. Use
these screens to configure your ZyXEL Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another
network or the Internet. It connects your private networks (such as a LAN (Local
Area Network) and other networks, so that a computer in one location can
communicate with computers in other locations.
Figure 29 LAN and WAN
LAN
WAN
6.1.1 What You Can Do in the WAN Screens
• Use the Internet Access Setup screen (Section 6.2 on page 73) to configure
the WAN settings on the ZyXEL Device for Internet access.
• Use the More Connections screen (Section 6.3 on page 77) to set up
additional Internet access connections.
6.1.2 What You Need to Know About WAN
Encapsulation Method
Encapsulation is used to include data from an upper layer protocol into a lower
layer protocol. To set up a WAN connection to the Internet, you need to use the
same encapsulation method used by your ISP (Internet Service Provider). If your
ISP offers a dial-up Internet connection using PPPoE (PPP over Ethernet) or PPPoA,
P-660HN-T1h User’s Guide
71
Chapter 6 WAN Setup
they should also provide a username and password (and service name) for user
authentication.
WAN IP Address
The WAN IP address is an IP address for the ZyXEL Device, which makes it
accessible from an outside network. It is used by the ZyXEL Device to
communicate with other devices in other networks. It can be static (fixed) or
dynamically assigned by the ISP each time the ZyXEL Device tries to access the
Internet.
If your ISP assigns you a static WAN IP address, they should also assign you the
subnet mask and DNS server IP address(es) (and a gateway IP address if you use
the Ethernet or ENET ENCAP encapsulation method).
Multicast
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1
sender - 1 recipient) or Broadcast (1 sender - everybody on the network).
Multicast delivers IP packets to a group of hosts on the network - not everybody
and not just one.
IGMP
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data.
There are three versions of IGMP. IGMP version 2 and 3 are improvements over
version 1, but IGMP version 1 is still in wide use.
Finding Out More
See Section 6.4 on page 81 for technical background information on WAN.
6.1.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP
address. Get this information from your ISP.
72
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
6.2 The Internet Access Setup Screen
Use this screen to change your ZyXEL Device’s WAN settings. Click Network >
WAN > Internet Access Setup. The screen differs by the WAN type and
encapsulation you select.
Figure 30 Network > WAN >Internet Access Setup (PPPoE)
The following table describes the labels in this screen.
Table 16 Network > WAN > Internet Access Setup
LABEL
DESCRIPTION
Line
ADSL Mode
Select the mode supported by your ISP.
Use Auto Sync-Up if you are not sure which mode to choose from.
The ZyXEL Device dynamically diagnoses the mode supported by the
ISP and selects the best compatible one for your connection.
Other options are ADSL2+, ADSL2, G.DMT, T1.413 and G.lite.
ADSL Type
Select the type supported by your ISP.
Available options are ANNEX A, ANNEX A/L, ANNEX M and ANNEX
A/L/M.
P-660HN-T1h User’s Guide
73
Chapter 6 WAN Setup
Table 16 Network > WAN > Internet Access Setup (continued)
LABEL
DESCRIPTION
General
Mode
Select Routing (default) from the drop-down list box if your ISP gives
you one IP address only and you want multiple computers to share an
Internet account. Select Bridge when your ISP provides you more
than one IP address and you want the connected computers to get
individual IP address from ISP’s DHCP server directly. If you select
Bridge, you cannot use Firewall, DHCP server and NAT on the ZyXEL
Device.
Encapsulation
Select the method of encapsulation used by your ISP from the dropdown list box. Choices vary depending on the mode you select in the
Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC
1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483,
ENET ENCAP or PPPoE.
User Name
(PPPoA and PPPoE encapsulation only) Enter the user name exactly as
your ISP assigned. If assigned a name in the form user@domain
where domain identifies a service name, then enter both components
exactly as given.
Password
(PPPoA and PPPoE encapsulation only) Enter the password associated
with the user name above.
Service Name
(PPPoE only) Type the name of your PPPoE service here.
Multiplexing
Select the method of multiplexing used by your ISP from the dropdown list. Choices are VC or LLC.
This field is not available if you set the WAN type to Ethernet.
Virtual Circuit ID
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define
a virtual circuit. Refer to the appendix for more information.
These fields are not available if you set the WAN type to Ethernet.
VPI
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
VCI
The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for
local management of ATM traffic). Enter the VCI assigned to you.
IP Address
This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic
IP address; otherwise select Static IP Address and type your ISP
assigned IP address in the IP Address field below.
Subnet Mask
This option is available if you select ENET ENCAP in the
Encapsulation field.
Enter a subnet mask in dotted decimal notation.
ENET ENCAP
Gateway
This option is available if you select ENET ENCAP in the
Encapsulation field.
Specify a gateway IP address (supplied by your ISP).
74
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
Table 16 Network > WAN > Internet Access Setup (continued)
LABEL
DESCRIPTION
Connection (PPPoA and PPPoE encapsulation only)
Keep Alive
Select Keep Alive when you want your connection up all the time.
The ZyXEL Device will try to bring up the connection automatically if it
is disconnected.
Connect on
Demand
Select Connect on Demand when you don't want the connection up
all the time and specify an idle time-out in the Max Idle Timeout
field.
Max Idle Timeout
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which means
the Internet session will not timeout.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced Setup
Click this to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
6.2.1 Advanced Internet Access Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the Internet Access Setup screen. The screen
appears as shown.
Figure 31 Network > WAN > Internet Access Setup: Advanced Setup
P-660HN-T1h User’s Guide
75
Chapter 6 WAN Setup
The following table describes the labels in this screen.
Table 17 Network > WAN > Internet Access Setup: Advanced Setup
LABEL
DESCRIPTION
RIP & Multicast
Setup
This section is not available when you configure the ZyXEL Device to
be in bridge mode.
RIP Direction
RIP (Routing Information Protocol) allows a router to exchange
routing information with other routers. Use this field to control how
much routing information the ZyXEL Device sends and receives on the
subnet.
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
This field is not configurable if you select None in the RIP Direction
field.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast
Multicast packets are sent to a group of computers on the LAN and are
an alternative to unicast packets (packets sent to one computer) and
broadcast packets (packets sent to every computer).
Internet Group Multicast Protocol (IGMP) is a network-layer protocol
used to establish membership in a multicast group. The ZyXEL Device
supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable
it.
ATM QoS
ATM QoS Type
Select CBR (Continuous Bit Rate) to specify fixed (always-on)
bandwidth for voice or data traffic. Select UBR (Unspecified Bit Rate)
for applications that are non-time sensitive, such as e-mail. Select
rtVBR (real-time Variable Bit Rate) type for applications with bursty
connections that require closely controlled delay and delay variation.
Select nrtVBR (non real-time Variable Bit Rate) type for connections
that do not require closely controlled delay and delay variation.
Peak Cell Rate
Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find
the Peak Cell Rate (PCR). This is the maximum rate at which the
sender can send cells. Type the PCR here.
Sustain Cell
Rate
The Sustain Cell Rate (SCR) sets the average cell rate (long-term)
that can be transmitted. Type the SCR, which must be less than the
PCR. Note that system default is 0 cells/sec.
Maximum
Burst Size
Maximum Burst Size (MBS) refers to the maximum number of cells
that can be sent at the peak rate. Type the MBS, which is less than
65535.
MTU
MTU
The Maximum Transmission Unit (MTU) defines the size of the largest
packet allowed on an interface or connection. Enter the MTU in this
field.
For ENET ENCAP, the MTU value is 1500.
For PPPoE, the MTU value is 1492.
For PPPoA and RFC 1483, the MTU is 65535.
Back
76
Click this to return to the previous screen without saving.
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
Table 17 Network > WAN > Internet Access Setup: Advanced Setup (continued)
LABEL
DESCRIPTION
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
6.3 The More Connections Screen
The ZyXEL Device allows you to configure more than one Internet access
connection. To configure additional Internet access connections click Network >
WAN > More Connections. The screen differs by the encapsulation you select.
When you use the WAN > Internet Access Setup screen to set up Internet
access, you are configuring the first WAN connection.
Figure 32 Network > WAN > More Connections
The following table describes the labels in this screen.
Table 18 Network > WAN > More Connections
LABEL
DESCRIPTION
This is an index number indicating the number of the corresponding
connection.
Active
This field indicates whether the connection is active or not.
Clear the check box to disable the connection. Select the check box to
enable it.
Name
This is the name you gave to the Internet connection.
VPI/VCI
This field displays the Virtual Path Identifier (VPI) and Virtual Channel
Identifier (VCI) numbers configured for this WAN connection.
Encapsulation
This field indicates the encapsulation method of the Internet connection.
P-660HN-T1h User’s Guide
77
Chapter 6 WAN Setup
Table 18 Network > WAN > More Connections (continued)
LABEL
DESCRIPTION
Modify
The first (ISP) connection is read-only in this screen. Use the WAN >
Internet Access Setup screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon
on an empty configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your
connection list.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
6.3.1 More Connections Edit
Use this screen to configure a connection. Click the edit icon in the More
Connections screen to display the following screen.
Figure 33 Network > WAN > More Connections: Edit
78
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
The following table describes the labels in this screen.
Table 19 Network > WAN > More Connections: Edit
LABEL
DESCRIPTION
General
Active
Select the check box to activate or clear the check box to
deactivate this connection.
Name
Enter a unique, descriptive name of up to 13 ASCII characters for
this connection.
Mode
Select Routing from the drop-down list box if your ISP allows
multiple computers to share an Internet account.
If you select Bridge, the ZyXEL Device will forward any packet
that it does not route to this remote node; otherwise, the packets
are discarded.
Encapsulation
Select the method of encapsulation used by your ISP from the
drop-down list box. Choices vary depending on the mode you
select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or
RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC
1483, ENET ENCAP or PPPoE.
Multiplexing
Select the method of multiplexing used by your ISP from the
drop-down list. Choices are VC or LLC.
By prior agreement, a protocol is assigned a specific virtual
circuit, for example, VC1 will carry IP. If you select VC, specify
separate VPI and VCI numbers for each protocol.
For LLC-based multiplexing or PPP encapsulation, one VC carries
multiple protocols with protocol identifying information being
contained in each packet header. In this case, only one set of VPI
and VCI numbers need be specified for all protocols.
VPI
The valid range for the VPI is 0 to 255. Enter the VPI assigned to
you.
VCI
The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for
local management of ATM traffic). Enter the VCI assigned to you.
IP Address
This option is available if you select Routing in the Mode field.
A static IP address is a fixed IP that your ISP gives you. A
dynamic IP address is not fixed; the ISP assigns you a different
one each time you connect to the Internet.
If you use the encapsulation type except RFC 1483, select
Obtain an IP Address Automatically when you have a
dynamic IP address; otherwise select Static IP Address and
type your ISP assigned IP address in the IP Address field below.
If you use RFC 1483, enter the IP address given by your ISP in
the IP Address field.
Subnet Mask
This option is available if you select ENET ENCAP in the
Encapsulation field.
Enter a subnet mask in dotted decimal notation.
P-660HN-T1h User’s Guide
79
Chapter 6 WAN Setup
Table 19 Network > WAN > More Connections: Edit (continued)
LABEL
ENET ENCAP
Gateway
DESCRIPTION
This option is available if you select ENET ENCAP in the
Encapsulation field.
Specify a gateway IP address (supplied by your ISP).
Connection
Nailed-Up Connection
Select Nailed-Up Connection when you want your connection
up all the time. The ZyXEL Device will try to bring up the
connection automatically if it is disconnected.
Connect on Demand
Select Connect on Demand when you don't want the connection
up all the time and specify an idle time-out in the Max Idle
Timeout field.
Max Idle Timeout
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which
means the Internet session will not timeout.
NAT
SUA only is available only when you select Routing in the Mode
field.
Select SUA Only if you have one public IP address and want to
use NAT. Click Edit Detail to go to the Port Forwarding screen
to edit a server mapping set.
Otherwise, select None to disable NAT.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced Setup
Click this to display the More Connections Advanced Setup
screen and edit more details of your WAN setup.
6.3.2 Configuring More Connections Advanced Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 34 Network > WAN > More Connections: Edit: Advanced Setup
80
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
The following table describes the labels in this screen.
Table 20 Network > WAN > More Connections: Edit: Advanced Setup
LABEL
DESCRIPTION
ATM QoS
ATM QoS Type
Select CBR (Continuous Bit Rate) to specify fixed (always-on)
bandwidth for voice or data traffic. Select UBR (Unspecified Bit
Rate) for applications that are non-time sensitive, such as e-mail.
Select nrtVBR (Variable Bit Rate-non Real Time) or rtVBR
(Variable Bit Rate-Real Time) for bursty traffic and bandwidth
sharing with other applications.
Peak Cell Rate
Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to
find the Peak Cell Rate (PCR). This is the maximum rate at which
the sender can send cells. Type the PCR here.
Sustain Cell Rate
The Sustain Cell Rate (SCR) sets the average cell rate (long-term)
that can be transmitted. Type the SCR, which must be less than
the PCR. Note that system default is 0 cells/sec.
Maximum Burst Size
Maximum Burst Size (MBS) refers to the maximum number of
cells that can be sent at the peak rate. Type the MBS, which is
less than 65535.
MTU
MTU
The Maximum Transmission Unit (MTU) defines the size of the
largest packet allowed on an interface or connection. Enter the
MTU in this field.
For ENET ENCAP, the MTU value is 1500.
For PPPoE, the MTU value is 1492.
For PPPoA and RFC, the MTU is 65535.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
6.4 WAN Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
6.4.1 Encapsulation
Be sure to use the encapsulation method required by your ISP. The ZyXEL Device
supports the following methods.
P-660HN-T1h User’s Guide
81
Chapter 6 WAN Setup
6.4.1.1 ENET ENCAP
The MAC Encapsulated Routing Link Protocol (ENET ENCAP) is only implemented
with the IP network protocol. IP packets are routed between the Ethernet interface
and the WAN interface and then formatted so that they can be understood in a
bridged environment. For instance, it encapsulates routed Ethernet frames into
bridged ATM cells. ENET ENCAP requires that you specify a gateway IP address in
the Gateway IP Address field in the wizard or WAN screen. You can get this
information from your ISP.
6.4.1.2 PPP over Ethernet
The ZyXEL Device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is
an IETF Draft standard (RFC 2516) specifying how a personal computer (PC)
interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The
PPPoE option is for a dial-up connection using PPPoE.
For the service provider, PPPoE offers an access and authentication method that
works with existing access control systems (for example RADIUS).
One of the benefits of PPPoE is the ability to let you access one of multiple network
services, a function known as dynamic service selection. This enables the service
provider to easily create and offer new IP services for individuals.
Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as
it requires no specific configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the ZyXEL Device (rather than individual
computers), the computers on the LAN do not need PPPoE software installed,
since the ZyXEL Device does that part of the task. Furthermore, with NAT, all of
the LANs’ computers will have access.
6.4.1.3 PPPoA
PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). A
PPPoA connection functions like a dial-up Internet connection. The ZyXEL Device
encapsulates the PPP session based on RFC1483 and sends it through an ATM PVC
(Permanent Virtual Circuit) to the Internet Service Provider’s (ISP) DSLAM (Digital
Subscriber Line (DSL) Access Multiplexer). Please refer to RFC 2364 for more
information on PPPoA. Refer to RFC 1661 for more information on PPP.
6.4.1.4 RFC 1483
RFC 1483 describes two methods for Multiprotocol Encapsulation over ATM
Adaptation Layer 5 (AAL5). The first method allows multiplexing of multiple
protocols over a single ATM virtual circuit (LLC-based multiplexing) and the second
82
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
method assumes that each protocol is carried over a separate ATM virtual circuit
(VC-based multiplexing). Please refer to RFC 1483 for more detailed information.
6.4.2 Multiplexing
There are two conventions to identify what protocols the virtual circuit (VC) is
carrying. Be sure to use the multiplexing method required by your ISP.
VC-based Multiplexing
In this case, by prior mutual agreement, each protocol is assigned to a specific
virtual circuit; for example, VC1 carries IP, etc. VC-based multiplexing may be
dominant in environments where dynamic creation of large numbers of ATM VCs is
fast and economical.
LLC-based Multiplexing
In this case one VC carries multiple protocols with protocol identifying information
being contained in each packet header. Despite the extra bandwidth and
processing overhead, this method may be advantageous if it is not practical to
have a separate VC for each carried protocol, for example, if charging heavily
depends on the number of simultaneous VCs.
6.4.3 VPI and VCI
Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel
Identifier (VCI) numbers assigned to you. The valid range for the VPI is 0 to 255
and for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM
traffic). Please see the appendix for more information.
6.4.4 IP Address Assignment
A static IP is a fixed IP that your ISP gives you. A dynamic IP is not fixed; the ISP
assigns you a different one each time. The Single User Account feature can be
enabled or disabled if you have either a dynamic or static IP. However the
encapsulation method assigned influences your choices for IP address and ENET
ENCAP gateway.
IP Assignment with PPPoA or PPPoE Encapsulation
If you have a dynamic IP, then the IP Address and Gateway IP Address fields
are not applicable (N/A). If you have a static IP, then you only need to fill in the IP
Address field and not the Gateway IP Address field.
P-660HN-T1h User’s Guide
83
Chapter 6 WAN Setup
IP Assignment with RFC 1483 Encapsulation
In this case the IP address assignment must be static.
IP Assignment with ENET ENCAP Encapsulation
In this case you can have either a static or dynamic IP. For a static IP you must fill
in all the IP Address and Gateway IP Address fields as supplied by your ISP.
However for a dynamic IP, the ZyXEL Device acts as a DHCP client on the WAN
port and so the IP Address and Gateway IP Address fields are not applicable
(N/A) as the DHCP server assigns them to the ZyXEL Device.
6.4.5 Nailed-Up Connection (PPP)
A nailed-up connection is a dial-up line where the connection is always up
regardless of traffic demand. The ZyXEL Device does two things when you specify
a nailed-up connection. The first is that idle timeout is disabled. The second is that
the ZyXEL Device will try to bring up the connection when turned on and
whenever the connection is down. A nailed-up connection can be very expensive
for obvious reasons.
Do not specify a nailed-up connection unless your telephone company offers flatrate service or you need a constant connection and the cost is of no concern.
6.4.6 NAT
NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP
address of a host in a packet, for example, the source address of an outgoing
packet, used within one network to a different IP address known within another
network.
6.5 Traffic Shaping
Traffic Shaping is an agreement between the carrier and the subscriber to regulate
the average rate and fluctuations of data transmission over an ATM network. This
agreement helps eliminate congestion, which is important for transmission of real
time data such as audio and video connections.
Peak Cell Rate (PCR) is the maximum rate at which the sender can send cells. This
parameter may be lower (but not higher) than the maximum line speed. 1 ATM
cell is 53 bytes (424 bits), so a maximum speed of 832Kbps gives a maximum
PCR of 1962 cells/sec. This rate is not guaranteed because it is dependent on the
line speed.
84
P-660HN-T1h User’s Guide
Chapter 6 WAN Setup
Sustained Cell Rate (SCR) is the mean cell rate of each bursty traffic source. It
specifies the maximum average rate at which cells can be sent over the virtual
connection. SCR may not be greater than the PCR.
Maximum Burst Size (MBS) is the maximum number of cells that can be sent at
the PCR. After MBS is reached, cell rates fall below SCR until cell rate averages to
the SCR again. At this time, more cells (up to the MBS) can be sent at the PCR
again.
If the PCR, SCR or MBS is set to the default of "0", the system will assign a
maximum value that correlates to your upstream line rate.
The following figure illustrates the relationship between PCR, SCR and MBS.
Figure 35 Example of Traffic Shaping
6.5.1 ATM Traffic Classes
These are the basic ATM traffic classes defined by the ATM Forum Traffic
Management 4.0 Specification.
Constant Bit Rate (CBR)
Constant Bit Rate (CBR) provides fixed bandwidth that is always available even if
no data is being sent. CBR traffic is generally time-sensitive (doesn't tolerate
delay). CBR is used for connections that continuously require a specific amount of
bandwidth. A PCR is specified and if traffic exceeds this rate, cells may be
dropped. Examples of connections that need CBR would be high-resolution video
and voice.
Variable Bit Rate (VBR)
The Variable Bit Rate (VBR) ATM traffic class is used with bursty connections.
Connections that use the Variable Bit Rate (VBR) traffic class can be grouped into
real time (VBR-RT) or non-real time (VBR-nRT) connections.
P-660HN-T1h User’s Guide
85
Chapter 6 WAN Setup
The VBR-RT (real-time Variable Bit Rate) type is used with bursty connections that
require closely controlled delay and delay variation. It also provides a fixed
amount of bandwidth (a PCR is specified) but is only available when data is being
sent. An example of an VBR-RT connection would be video conferencing. Video
conferencing requires real-time data transfers and the bandwidth requirement
varies in proportion to the video image's changing dynamics.
The VBR-nRT (non real-time Variable Bit Rate) type is used with bursty
connections that do not require closely controlled delay and delay variation. It is
commonly used for "bursty" traffic typical on LANs. PCR and MBS define the burst
levels, SCR defines the minimum level. An example of an VBR-nRT connection
would be non-time sensitive data file transfers.
Unspecified Bit Rate (UBR)
The Unspecified Bit Rate (UBR) ATM traffic class is for bursty data transfers.
However, UBR doesn't guarantee any bandwidth and only delivers traffic when the
network has spare bandwidth. An example application is background file transfer.
86
P-660HN-T1h User’s Guide
CHAPTER
LAN Setup
7.1 Overview
A Local Area Network (LAN) is a shared communication system to which many
networking devices are connected. It is usually located in one immediate area
such as a building or floor of a building.
Use the LAN screens to help you configure a LAN DHCP server and manage IP
addresses.
LAN
DSL
7.1.1 What You Can Do in the LAN Screens
• Use the LAN IP screen (Section 7.2 on page 89) to set the LAN IP address and
subnet mask of your ZyXEL device. You can also edit your ZyXEL Device's RIP,
multicast and Windows Networking settings from this screen.
• Use the DHCP Setup screen (Section 7.3 on page 91) to configure the ZyXEL
Device’s DHCP settings.
• Use the Client List screen (Section 7.4 on page 92) to assign IP addresses on
the LAN to specific individual computers based on their MAC Addresses.
• Use the IP Alias screen (Section 7.5 on page 93) to change your ZyXEL
Device’s IP alias settings.
P-660HN-T1h User’s Guide
87
Chapter 7 LAN Setup
7.1.2 What You Need To Know About LAN
IP Address
IP addresses identify individual devices on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to
communicate across the network. These networking devices are also known as
hosts.
Subnet Mask
Subnet masks determine the maximum number of possible hosts on a network.
You can also use subnet masks to divide one network into multiple sub-networks.
DHCP
A DHCP (Dynamic Host Configuration Protocol) server can assign your ZyXEL
Device an IP address, subnet mask, DNS and other routing information when it's
turned on.
RIP
RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers.
Multicast
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1
sender - 1 recipient) or Broadcast (1 sender - everybody on the network).
Multicast delivers IP packets to a group of hosts on the network - not everybody
and not just 1.
IGMP
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data.
There are three versions of IGMP. IGMP version 2 and 3 are improvements over
version 1, but IGMP version 1 is still in wide use.
DNS
DNS (Domain Name System) is for mapping a domain name to its corresponding
IP address and vice versa. The DNS server is extremely important because
without it, you must know the IP address of a networking device before you can
access it.
88
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
Finding Out More
See Section 7.6 on page 95 for technical background information on LANs.
7.1.3 Before You Begin
Find out the MAC addresses of your network devices if you intend to add them to
the DHCP Client List screen.
7.2 The LAN IP Screen
Use this screen to set the Local Area Network IP address and subnet mask of your
ZyXEL Device. Click Network > LAN to open the IP screen.
Follow these steps to configure your LAN settings.
Enter an IP address into the IP Address field. The IP address must be in dotted
decimal notation. This will become the IP address of your ZyXEL Device.
Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
Click Apply to save your settings.
Figure 36 Network > LAN > IP
P-660HN-T1h User’s Guide
89
Chapter 7 LAN Setup
The following table describes the fields in this screen.
Table 21 Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your ZyXEL Device
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced Setup
Click this to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
7.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your ZyXEL Device's RIP, multicast and Windows
Networking settings. Click the Advanced Setup button in the LAN IP screen. The
screen appears as shown.
Figure 37 Network > LAN > IP: Advanced Setup
The following table describes the labels in this screen.
Table 22 Network > LAN > IP: Advanced Setup
LABEL
DESCRIPTION
RIP & Multicast Setup
90
RIP Direction
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast
IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a multicast group. The ZyXEL Device
supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable
it.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
7.3 The DHCP Setup Screen
Use this screen to configure the DNS server information that the ZyXEL Device
sends to the DHCP client devices on the LAN. Click Network > DHCP Setup to
open this screen.
Figure 38 Network > LAN > DHCP Setup
The following table describes the labels in this screen.
Table 23 Network > LAN > DHCP Setup
LABEL
DESCRIPTION
DHCP Setup
DHCP
If set to Server, your ZyXEL Device can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows NT and
other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server
and relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set:
IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
Pool Size
This field specifies the size, or count of the IP address pool.
Remote DHCP
Server
If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
DNS Server
P-660HN-T1h User’s Guide
91
Chapter 7 LAN Setup
Table 23 Network > LAN > DHCP Setup
LABEL
DESCRIPTION
DNS Servers
Assigned by DHCP
Server
The ZyXEL Device passes a DNS (Domain Name System) server IP
address to the DHCP clients.
Primary /
Secondary DNS
Server
Enter the IP address of your primary/secondary DNS server.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
7.4 The Client List Screen
This table allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device’s static DHCP settings. Click
Network > LAN > Client List to open the following screen.
Figure 39 Network > LAN > Client List
The following table describes the labels in this screen.
Table 24 Network > LAN > Client List
92
LABEL
DESCRIPTION
IP Address
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
MAC Address
Enter the MAC address of a computer on your LAN.
Add
Click this to add a static DHCP entry.
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
Table 24 Network > LAN > Client List
LABEL
DESCRIPTION
This is the index number of the static IP table entry (row).
Status
This field displays whether the client is connected to the ZyXEL Device.
Host Name
This field displays the computer host name.
IP Address
This field displays the IP address relative to the # field listed above.
MAC Address
The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
Reserve
Select the check box in the heading row to automatically select all
check boxes or select the check box(es) in each entry to have the
ZyXEL Device always assign the selected entry(ies)’s IP address(es) to
the corresponding MAC address(es) (and host name(s)). You can select
up to 10 entries in this table.
Modify
Click the modify icon to have the IP address field editable and change
it.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Refresh
Click this to reload the DHCP table.
7.5 The IP Alias Screen
IP alias allows you to partition a physical network into different logical networks
over the same Ethernet interface. The ZyXEL Device supports three logical LAN
interfaces via its single physical Ethernet interface with the ZyXEL Device itself as
the gateway for each LAN network.
When you use IP alias, you can also configure firewall rules to control access
between the LAN's logical networks (subnets).
Note: Make sure that the subnets of the logical networks do not overlap.
P-660HN-T1h User’s Guide
93
Chapter 7 LAN Setup
The following figure shows a LAN divided into subnets A, B, and C.
Figure 40 Physical Network & Partitioned Logical Networks
A: 192.168.1.1 - 192.168.1.24
Ethernet
Interface
B: 192.168.2.1 - 192.168.2.24
C: 192.168.3.1 - 192.168.3.24
7.5.1 Configuring the LAN IP Alias Screen
Use this screen to change your ZyXEL Device’s IP alias settings. Click Network >
LAN > IP Alias to open the following screen.
Figure 41 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 25 Network > LAN > IP Alias
LABEL
DESCRIPTION
IP Alias 1
Select the check box to configure another LAN network for the ZyXEL
Device.
IP Address
Enter the IP address of your ZyXEL Device in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP
address.
IP Subnet Mask
94
Your ZyXEL Device will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyXEL Device.
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
Table 25 Network > LAN > IP Alias
LABEL
DESCRIPTION
RIP Direction
RIP (Routing Information Protocol, RFC 1058 and RFC 1389) allows a
router to exchange routing information with other routers. The RIP
Direction field controls the sending and receiving of RIP packets.
Select the RIP direction from Both/In Only/Out Only/None. When
set to Both or Out Only, the ZyXEL Device will broadcast its routing
table periodically. When set to Both or In Only, it will incorporate the
RIP information that it receives; when set to None, it will not send any
RIP packets and will ignore any RIP packets received.
RIP Version
The RIP Version field controls the format and the broadcasting
method of the RIP packets that the ZyXEL Device sends (it recognizes
both formats when receiving). RIP-1 is universally supported but RIP-2
carries more information. RIP-1 is probably adequate for most
networks, unless you have an unusual network topology. Both RIP-2B
and RIP-2M sends the routing data in RIP-2 format; the difference
being that RIP-2B uses subnet broadcasting while RIP-2M uses
multicasting. Multicasting can reduce the load on non-router machines
since they generally do not listen to the RIP multicast address and so
will not receive the RIP packets. However, if one router uses
multicasting, then all routers on your network must use multicasting,
also. By default, RIP direction is set to Both and the Version set to
RIP-1.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
7.6 LAN Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
P-660HN-T1h User’s Guide
95
Chapter 7 LAN Setup
7.6.1
LANs, WANs and the ZyXEL Device
The actual physical connection determines whether the ZyXEL Device ports are
LAN or WAN ports. There are two separate IP networks, one inside the LAN
network and the other outside the WAN network as shown next.
Figure 42 LAN and WAN IP Addresses
LAN
WAN
7.6.2 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the ZyXEL Device as a DHCP server or disable it. When configured as a
server, the ZyXEL Device provides the TCP/IP configuration for the clients. If you
turn DHCP service off, you must have another DHCP server on your LAN, or else
the computer must be manually configured.
IP Pool Setup
The ZyXEL Device is pre-configured with a pool of IP addresses for the DHCP
clients (DHCP Pool). See the product specifications in the appendices. Do not
assign static IP addresses from the DHCP pool to your LAN computers.
7.6.3 DNS Server Addresses
DNS (Domain Name System) maps a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without
it, you must know the IP address of a computer before you can access it. The DNS
server addresses you enter when you set up DHCP are passed to the client
machines along with the assigned IP address and subnet mask.
There are two ways that an ISP disseminates the DNS server addresses.
96
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
• The ISP tells you the DNS server addresses, usually in the form of an
information sheet, when you sign up. If your ISP gives you DNS server
addresses, enter them in the DNS Server fields in the DHCP Setup screen.
• Some ISPs choose to disseminate the DNS server addresses using the DNS
server extensions of IPCP (IP Control Protocol) after the connection is up. If
your ISP did not give you explicit DNS servers, chances are the DNS servers are
conveyed through IPCP negotiation. The ZyXEL Device supports the IPCP DNS
server extensions through the DNS proxy feature.
Please note that DNS proxy works only when the ISP uses the IPCP DNS server
extensions. It does not mean you can leave the DNS servers out of the DHCP
setup under all circumstances. If your ISP gives you explicit DNS servers, make
sure that you enter their IP addresses in the DHCP Setup screen.
7.6.4 LAN TCP/IP
The ZyXEL Device has built-in DHCP server capability that assigns IP addresses
and DNS servers to systems that support DHCP client capability.
IP Address and Subnet Mask
Similar to the way houses on a street share a common street name, so too do
computers on a LAN share one common network number.
Where you obtain your network number depends on your particular situation. If
the ISP or your network administrator assigns you a block of registered IP
addresses, follow their instructions in selecting the IP addresses and the subnet
mask.
If the ISP did not explicitly give you an IP network number, then most likely you
have a single user account and the ISP will assign you a dynamic IP address when
the connection is established. If this is the case, it is recommended that you select
a network number from 192.168.0.0 to 192.168.255.0 and you must enable the
Network Address Translation (NAT) feature of the ZyXEL Device. The Internet
Assigned Number Authority (IANA) reserved this block of addresses specifically for
private use; please do not use any other number unless you are told otherwise.
Let's say you select 192.168.1.0 as the network number; which covers 254
individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are
reserved). In other words, the first three numbers specify the network number
while the last number identifies an individual computer on that network.
Once you have decided on the network number, pick an IP address that is easy to
remember, for instance, 192.168.1.1, for your ZyXEL Device, but make sure that
no other device on your network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL Device will compute the subnet mask automatically based on the IP
P-660HN-T1h User’s Guide
97
Chapter 7 LAN Setup
address that you entered. You don't need to change the subnet mask computed by
the ZyXEL Device unless you are instructed to do otherwise.
Private IP Addresses
Every machine on the Internet must have a unique address. If your networks are
isolated from the Internet, for example, only between your two branch offices, you
can assign any IP addresses to the hosts without problems. However, the Internet
Assigned Numbers Authority (IANA) has reserved the following three blocks of IP
addresses specifically for private networks:
• 10.0.0.0
• 172.16.0.0
— 10.255.255.255
— 172.31.255.255
• 192.168.0.0 — 192.168.255.255
You can obtain your IP address from the IANA, from an ISP or it can be assigned
from a private network. If you belong to a small organization and your Internet
access is through an ISP, the ISP can provide you with the Internet addresses for
your local networks. On the other hand, if you are part of a much larger
organization, you should consult your network administrator for the appropriate IP
addresses.
Note: Regardless of your particular situation, do not create an arbitrary IP address;
always follow the guidelines above. For more information on address
assignment, please refer to RFC 1597, “Address Allocation for Private
Internets” and RFC 1466, “Guidelines for Management of IP Address Space”.
7.6.5 RIP Setup
RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers. The RIP Direction field controls the sending and
receiving of RIP packets. When set to:
• Both - the ZyXEL Device will broadcast its routing table periodically and
incorporate the RIP information that it receives.
• In Only - the ZyXEL Device will not send any RIP packets but will accept all RIP
packets received.
• Out Only - the ZyXEL Device will send out RIP packets but will not accept any
RIP packets received.
• None - the ZyXEL Device will not send any RIP packets and will ignore any RIP
packets received.
The Version field controls the format and the broadcasting method of the RIP
packets that the ZyXEL Device sends (it recognizes both formats when receiving).
RIP-1 is universally supported; but RIP-2 carries more information. RIP-1 is
98
P-660HN-T1h User’s Guide
Chapter 7 LAN Setup
probably adequate for most networks, unless you have an unusual network
topology.
Both RIP-2B and RIP-2M sends the routing data in RIP-2 format; the difference
being that RIP-2B uses subnet broadcasting while RIP-2M uses multicasting.
7.6.6 Multicast
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1
sender - 1 recipient) or Broadcast (1 sender - everybody on the network).
Multicast delivers IP packets to a group of hosts on the network - not everybody
and not just 1.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data. IGMP
version 2 (RFC 2236) is an improvement over version 1 (RFC 1112) but IGMP
version 1 is still in wide use. IGMP version 3 supports source filtering, reporting or
ignoring traffic from specific source address to a particular host on the network. If
you would like to read more detailed information about interoperability between
IGMP version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class
D IP address is used to identify host groups and can be in the range 224.0.0.0 to
239.255.255.255. The address 224.0.0.0 is not assigned to any group and is used
by IP multicast computers. The address 224.0.0.1 is used for query messages and
is assigned to the permanent group of all IP hosts (including gateways). All hosts
must join the 224.0.0.1 group in order to participate in IGMP. The address
224.0.0.2 is assigned to the multicast routers group.
The ZyXEL Device supports IGMP version 1 (IGMP-v1), IGMP version 2 (IGMPv2) and IGMP version 3 (IGMP-v3). At start up, the ZyXEL Device queries all
directly connected networks to gather group membership. After that, the ZyXEL
Device periodically updates this information. IP multicasting can be enabled/
disabled on the ZyXEL Device LAN and/or WAN interfaces in the web configurator
(LAN; WAN). Select None to disable IP multicasting on these interfaces.
P-660HN-T1h User’s Guide
99
Chapter 7 LAN Setup
100
P-660HN-T1h User’s Guide
CHAPTER
Wireless LAN
8.1 Overview
This chapter describes how to perform tasks related to setting up and optimizing
your wireless network, including the following.
• Turning the wireless connection on or off.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Setting up multiple wireless networks.
• Using a MAC (Media Access Control) address filter to restrict access to the
wireless network.
• Setting up a Wireless Distribution System (WDS).
• Performing other performance-related wireless tasks.
8.1.1 What You Can Do in the Wireless LAN Screens
This section describes the ZyXEL Device’s Network > Wireless LAN screens. Use
these screens to set up your ZyXEL Device’s wireless connection.
• Use the AP screen (see Section 8.2 on page 103) to turn the wireless
connection on or off, set up wireless security, configure the MAC filter, and make
other basic configuration changes.
• Use the More AP screen (see Section 8.3 on page 111) to set up multiple
wireless networks on your ZyXEL Device.
• Use the WPS screen (see Section 8.4 on page 113) to enable or disable WPS,
generate a security PIN (Personal Identification Number) and see information
about the ZyXEL Device’s WPS status.
• Use the WPS Station (see Section 8.5 on page 114) screen to set up WPS by
pressing a button or using a PIN.
• Use the WDS screen (see Section 8.6 on page 115) to set up a Wireless
Distribution System, in which the ZyXEL Device acts as a bridge with other
ZyXEL access points.
• Use the Scheduling screen (see Section 8.7 on page 117) to configure the
dates/times to enable or disable the wireless LAN.
P-660HN-T1h User’s Guide
101
Chapter 8 Wireless LAN
You don’t necessarily need to use all these screens to set up your wireless
connection. For example, you may just want to set up a network name, a wireless
radio channel and security in the AP screen.
8.1.2 What You Need to Know About Wireless
Wireless Basics
“Wireless” is essentially radio communication. In the same way that walkie-talkie
radios send and receive information over the airwaves, wireless networking
devices exchange information with one another. A wireless networking device is
just like a radio that lets your computer exchange information with radios
attached to other computers. Like walkie-talkies, most wireless networking
devices operate at radio frequency bands that are open to the public and do not
require a license to use. However, wireless networking is different from that of
most traditional radio communications in that there a number of wireless
networking standards available with different methods of data encryption.
SSID
Each network must have a name, referred to as the SSID - “Service Set
IDentifier”. The “service set” is the network, so the “service set identifier” is the
network’s name. This helps you identify your wireless network when wireless
networks’ coverage areas overlap and you have a variety of networks to choose
from.
MAC Address Filter
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address consists of twelve hexadecimal characters (0-9, and A to F), and it is
usually written in the following format: “0A:A0:00:BB:CC:DD”.
The MAC address filter controls access to the wireless network. You can use the
MAC address of each wireless client to allow or deny access to the wireless
network.
Finding Out More
See Section 8.8 on page 118 for advanced technical information on wireless
networks.
8.1.3 Before You Start
Before you start using these screens, ask yourself the following questions. See
Section 8.1.2 on page 102 if some of the terms used here are not familiar to you.
102
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
• What wireless standards do the other wireless devices in your network support
(IEEE 802.11g, for example)? What is the most appropriate standard to use?
• What security options do the other wireless devices in your network support
(WPA-PSK, for example)? What is the strongest security option supported by all
the devices in your network?
• Do the other wireless devices in your network support WPS (Wi-Fi Protected
Setup)? If so, you can set up a well-secured network very easily.
Even if some of your devices support WPS and some do not, you can use WPS to
set up your network and then add the non-WPS devices manually, although this
is somewhat more complicated to do.
• What advanced options do you want to configure, if any? If you want to
configure advanced options such as Quality of Service, ensure that you know
precisely what you want to do. If you do not want to configure advanced
options, leave them as they are.
8.2 The AP Screen
Use this screen to configure the wireless settings of your ZyXEL Device. Click
Network > Wireless LAN to open the AP screen.
Figure 43 Network > Wireless LAN > AP
P-660HN-T1h User’s Guide
103
Chapter 8 Wireless LAN
The following table describes the labels in this screen.
Table 26 Network > Wireless LAN > AP
LABEL
DESCRIPTION
Wireless Setup
Enable
Wireless LAN
Click the check box to activate wireless LAN.
Channel
Selection
Select the country in which your ZyXEL Device operates. Channels
available vary according to the country you select. Set the operating
channel manually by selecting a channel from the Channel Selection list
or use Auto Channel Select to have it automatically configured.
Common Setup
Network
Name (SSID)
The SSID (Service Set IDentity) identifies the service set with which a
wireless device is associated. Wireless devices associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the ZyXEL
Device’s SSID or WEP settings, you will lose your wireless
connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the
ZyXEL Device’s new settings.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Security
Mode
See the following sections for more details about this field.
MAC Filter
This shows whether the wireless devices with the MAC addresses listed are
allowed or denied to access the ZyXEL Device using this SSID.
Edit
Click this to go to the MAC Filter screen to configure MAC filter settings.
See Section 8.2.6 on page 110 for more details.
QoS
Select this check box to activate Quality of Service (QoS).
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Advanced
Setup
Click this to display the Wireless Advanced Setup screen and edit more
details of your WLAN setup. See Section 8.2.5 on page 108 for more
details.
8.2.1 No Security
In the Network > Wireless LAN > AP screen, select No Security from the
Security Mode list to allow wireless devices to communicate with the ZyXEL
Device without any data encryption or authentication.
104
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 44 Network > Wireless LAN > AP: No Security
The following table describes the labels in this screen.
Table 27 Network > Wireless LAN > AP: No Security
LABEL
DESCRIPTION
Security
Mode
Choose No Security from the drop-down list box.
8.2.2 WEP Encryption
Use this screen to configure and enable WEP encryption. Click Network >
Wireless LAN to display the AP screen. Select Static WEP from the Security
Mode list.
Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all the
wireless devices in your network support. For example, use WPA-PSK or
WPA2-PSK if all your wireless devices support it, or use WPA or WPA2 if your
wireless devices support it and you have a RADIUS server. If your wireless
devices support nothing stronger than WEP, use the highest encryption level
available.
Figure 45 Network > Wireless LAN > AP: Static WEP
P-660HN-T1h User’s Guide
105
Chapter 8 Wireless LAN
The following table describes the wireless LAN security labels in this screen.
Table 28 Network > Wireless LAN > AP: Static WEP
LABEL
DESCRIPTION
Security
Mode
Choose Static WEP from the drop-down list box.
Passphrase
Enter a passphrase (up to 32 printable characters) and click Generate.
The ZyXEL Device automatically generates a WEP key.
WEP Key
The WEP key is used to encrypt data. Both the ZyXEL Device and the
wireless stations must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5 or 13 characters
(ASCII string) or 10 or 26 hexadecimal characters ("0-9", "A-F") for a 64bit or 128-bit WEP key respectively.
8.2.3 WPA(2)-PSK
Use this screen to configure and enable WPA(2)-PSK authentication. Click
Network > Wireless LAN to display the AP screen. Select WPA-PSK or WPA2PSK from the Security Mode list.
Figure 46 Network > Wireless LAN > AP: WPA(2)-PSK
The following table describes the wireless LAN security labels in this screen.
Table 29 Network > Wireless LAN > AP: WPA(2)-PSK
LABEL
DESCRIPTION
Security Mode
Choose WPA-PSK or WPA2-PSK from the drop-down list box.
Pre-Shared Key
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are
the same. The only difference between the two is that WPA(2)-PSK
uses a simple common password, instead of user-specific credentials.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters
(including spaces and symbols).
WPA Group Key
Update Timer
106
The Group Key Update Timer is the rate at which the AP (if using
WPA(2)-PSK key management) or RADIUS server (if using WPA(2)
key management) sends a new group key out to all clients. The rekeying process is the WPA(2) equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis.
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
8.2.4 WPA(2) Authentication
Use this screen to configure and enable WPA or WPA2 authentication. Click the
Wireless LAN link under Network to display the AP screen. Select WPA, WPA2
or WPAMixed from the Security Mode list.
Figure 47 Network > Wireless LAN > AP: WPA(2)
The following table describes the wireless LAN security labels in this screen.
Table 30 Network > Wireless LAN > AP: WPA(2)
LABEL
DESCRIPTION
Security Mode
Choose WPA or WPA2 from the drop-down list box.
WPA Compatible
This check box is available only when you select WPA2-PSK or WPA2
in the Security Mode field.
Select the check box to have both WPA-PSK and WPA wireless clients
be able to communicate with the ZyXEL Device even when the ZyXEL
Device is using WPA2-PSK or WPA2.
ReAuthentication
Timer
Specify how often wireless stations have to resend usernames and
passwords in order to stay connected. Enter a time interval between
10 and 9999 seconds.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Idle Timeout
The ZyXEL Device automatically disconnects a wireless station from
the wired network after a period of inactivity. The wireless station
needs to enter the username and password again before access to the
wired network is allowed.
WPA Group Key
Update Timer
The Group Key Update Timer is the rate at which the AP (if using
WPA(2)-PSK key management) or RADIUS server (if using WPA(2)
key management) sends a new group key out to all clients. The rekeying process is the WPA(2) equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis.
P-660HN-T1h User’s Guide
107
Chapter 8 Wireless LAN
Table 30 Network > Wireless LAN > AP: WPA(2)
LABEL
DESCRIPTION
Authentication Server
IP Address
Enter the IP address of the external authentication server in dotted
decimal notation.
Port Number
Enter the port number of the external authentication server.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyXEL
Device.
The key must be the same on the external authentication server and
your ZyXEL Device. The key is not sent over the network.
8.2.5 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings. Click the Advanced
Setup button in the AP screen. The screen appears as shown.
See Section 8.8.2 on page 120 for detailed definitions of the terms listed in this
screen.
Figure 48 Network > Wireless LAN > AP: Advanced Setup
The following table describes the labels in this screen.
Table 31 Network > Wireless LAN > AP: Advanced Setup
108
LABEL
DESCRIPTION
RTS/CTS
Threshold
Enter a value between 0 and 2432.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
Table 31 Network > Wireless LAN > AP: Advanced Setup
LABEL
DESCRIPTION
Output Power
Set the output power of the ZyXEL Device. If there is a high density of
APs in an area, decrease the output power to reduce interference with
other APs. Select one of the following: 100%, 75%, 50% or 25%.
Preamble
Select a preamble type from the drop-down list menu. Choices are Long
or Short. See the Appendix D on page 293 for more information.
802.11 Mode
Select 802.11b Only to allow only IEEE 802.11b compliant WLAN
devices to associate with the ZyXEL Device.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device.
Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g
compliant WLAN devices to associate with the ZyXEL Device. The
transmission rate of your ZyXEL Device might be reduced.
Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to
associate with the ZyXEL Device.
Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n
compliant WLAN devices to associate with the ZyXEL Device. The
transmission rate of your ZyXEL Device might be reduced.
Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or
IEEE802.11n compliant WLAN devices to associate with the ZyXEL
Device. The transmission rate of your ZyXEL Device might be reduced.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
109
Chapter 8 Wireless LAN
8.2.6 MAC Filter
Use this screen to change your ZyXEL Device’s MAC filter settings. Click the Edit
button in the AP screen. The screen appears as shown.
Figure 49 Network > Wireless LAN > AP: MAC Address Filter
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > AP: MAC Address Filter
LABEL
DESCRIPTION
Active MAC
Filter
Select the check box to enable MAC address filtering.
Filter Action
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Deny to block access to the ZyXEL Device. MAC addresses not listed
will be allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
Set
MAC
Address
110
This is the index number of the MAC address.
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
Table 32 Network > Wireless LAN > AP: MAC Address Filter
LABEL
DESCRIPTION
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
8.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs)
on the ZyXEL Device.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 50 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > More AP
LABEL
DESCRIPTION
This is the index number of each SSID profile.
Active
This field indicates whether this SSID is active.
SSID
An SSID profile is the set of parameters relating to one of the ZyXEL
Device’s BSSs. The SSID (Service Set IDentifier) identifies the Service
Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When
a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Security
This field indicates the security mode of the SSID profile.
Modify
Click the Edit icon to configure the SSID profile.
Click the Remove icon to hide the SSID in the outgoing beacon frame so
a station cannot obtain the SSID through scanning using a site survey
tool.
P-660HN-T1h User’s Guide
111
Chapter 8 Wireless LAN
Table 33 Network > Wireless LAN > More AP
LABEL
DESCRIPTION
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
8.3.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the
More AP screen. The following screen displays.
Figure 51 Network > Wireless LAN > More AP: Edit
The following table describes the fields in this screen.
Table 34 Network > Wireless LAN > More AP: Edit
LABEL
DESCRIPTION
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which
a wireless device is associated. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the
ZyXEL Device’s SSID or security settings, you will lose
your wireless connection when you press Apply to
confirm. You must then change the wireless settings of
your computer to match the ZyXEL Device’s new settings.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame
so a station cannot obtain the SSID through scanning using a site
survey tool.
Security Mode
See Section 8.2 on page 103 for more details about this field.
MAC Filter
This shows whether the wireless devices with the MAC addresses
listed are allowed or denied to access the ZyXEL Device using this
SSID.
Edit
112
Click this to go to the MAC Filter screen to configure MAC filter
settings. See Section 8.2.6 on page 110 for more details.
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
Table 34 Network > Wireless LAN > More AP: Edit
LABEL
DESCRIPTION
QoS
Select this check box to activate Quality of Service (QoS).
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
8.4 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS.
Click Network > Wireless LAN > WPS. The following screen displays.
Figure 52 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN > WPS
LABEL
DESCRIPTION
WPS Setup
WPS Setup
P-660HN-T1h User’s Guide
Select the check box to activate WPS on the ZyXEL Device.
113
Chapter 8 Wireless LAN
Table 35 Network > Wireless LAN > WPS
LABEL
DESCRIPTION
PIN Number
This shows the PIN (Personal Identification Number) of the ZyXEL
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Generate
WPS Status
Click this to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device or you click Release
to remove the configured wireless and wireless security settings.
Release
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
Apply
Click this to save your changes.
Refresh
Click this to restore your previously saved settings.
8.5 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 53 Network > Wireless LAN > WPS Station
114
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > WPS Station
LABEL
DESCRIPTION
Push Button
Click this to add another WPS-enabled wireless device (within wireless
range of the ZyXEL Device) to your wireless network. This button may
either be a physical button on the outside of device, or a menu button
similar to the Push Button on this screen.
Note: You must press the other wireless device’s WPS button within
two minutes of pressing this button.
Or input
station's PIN
number
Enter the PIN of the device that you are setting up a WPS connection
with and click Start to authenticate and add the wireless device to your
wireless network.
You can find the PIN either on the outside of the device, or by checking
the device’s settings.
Note: You must also activate WPS on that device within two minutes
to have it present its PIN to the ZyXEL Device.
8.6 The WDS Screen
An AP using the Wireless Distribution System (WDS) can function as a wireless
network bridge allowing you to wirelessly connect two wired network segments.
The WDS screen allows you to configure the ZyXEL Device to connect to two or
more APs wirelessly when WDS is enabled.
Use this screen to set up your WDS (Wireless Distribution System) links between
the ZyXEL Device and other wireless APs. You need to know the MAC address of
the peer device. Once the security settings of peer sides match one another, the
connection between devices is made.
Note: WDS security is independent of the security settings between the ZyXEL
Device and any wireless clients.
Note: At the time of writing, WDS is compatible with other ZyXEL APs only. Not all
models support WDS links. Check your other AP’s documentation.
P-660HN-T1h User’s Guide
115
Chapter 8 Wireless LAN
Click Network > Wireless LAN > WDS. The following screen displays.
Figure 54 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN > WDS
LABEL
DESCRIPTION
WDS Security
Select the type of the key used to encrypt data between APs. All the
wireless APs (including the ZyXEL Device) must use the same preshared key for data transmission.
The option is available only when you set the security mode to WPA(2)
or WPA(2)-PSK in the Wireless LAN > AP screen.
116
TKIP
Select this to use TKIP (Temporal Key Integrity Protocol) encryption.
AES
Select this to use AES (Advanced Encryption Standard) encryption.
This is the index number of the individual WDS link.
Active
Select this to activate the link between the ZyXEL Device and the peer
device to which this entry refers. When you do not select the check box
this link is down.
Remote Bridge
MAC Address
Type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
PSK
Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII
characters (including spaces and symbols).
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
8.7 The Scheduling Screen
Use the wireless LAN scheduling to configure the days you want to enable or
disable the wireless LAN. Click Network > Wireless LAN > Scheduling. The
following screen displays.
Figure 55 Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > QoS
LABEL
DESCRIPTION
Enable
Wireless LAN
Scheduling
Select this box to activate wireless LAN scheduling on your ZyXEL
Device.
Action
Select On or Off to enable or disable the wireless LAN.
Day
Check the day(s) you want to turn the wireless LAN on or off.
Except for the
following times
Specify a time frame during which the schedule would apply.
Apply
Click this to save your changes.
Reset
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
For example, if you set the time range from 12:00 to 23:00, the wireless
LAN will be turned on only during this time period.
117
Chapter 8 Wireless LAN
8.8 Wireless LAN Technical Reference
This section discusses wireless LANs in depth. For more information, see the
appendix.
8.8.1 Wireless Network Overview
Wireless networks consist of wireless clients, access points and bridges.
• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can
connect with numerous wireless clients and let them access the network.
• A bridge is a radio that relays communications between access points and
wireless clients, extending a network’s range.
Traditionally, a wireless network operates in one of two ways.
• An “infrastructure” type of network has one or more access points and one or
more wireless clients. The wireless clients connect to the access points.
• An “ad-hoc” type of network is one in which there is no access point. Wireless
clients connect to one another in order to exchange information.
The following figure provides an example of a wireless network.
Figure 56 Example of a Wireless Network
118
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
The wireless network is the part in the blue circle. In this wireless network,
devices A and B use the access point (AP) to interact with the other devices (such
as the printer) or with the Internet. Your ZyXEL Device is the AP.
Every wireless network must follow these basic guidelines.
• Every device in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set
IDentifier.
• If two wireless networks overlap, they should use a different channel.
Like radio stations or television channels, each wireless network uses a specific
channel, or frequency, to send and receive information.
• Every device in the same wireless network must use security compatible with
the AP.
Security stops unauthorized devices from using the wireless network. It can also
protect the information that is sent in the wireless network.
Radio Channels
In the radio spectrum, there are certain frequency bands allocated for unlicensed,
civilian use. For the purposes of wireless networking, these bands are divided into
numerous channels. This allows a variety of networks to exist in the same place
without interfering with one another. When you create a network, you must select
a channel to use.
Since the available unlicensed spectrum varies from one country to another, the
number of available channels also varies.
P-660HN-T1h User’s Guide
119
Chapter 8 Wireless LAN
8.8.2 Additional Wireless Terms
The following table describes some wireless network terms and acronyms used in
the ZyXEL Device’s Web Configurator.
Table 39 Additional Wireless Terms
TERM
DESCRIPTION
RTS/CTS Threshold
In a wireless network which covers a large area, wireless devices
are sometimes not aware of each other’s presence. This may cause
them to send information to the AP at the same time and result in
information colliding and not getting through.
By setting this value lower than the default value, the wireless
devices must sometimes get permission to send information to the
ZyXEL Device. The lower the value, the more often the devices must
get permission.
If this value is greater than the fragmentation threshold value (see
below), then wireless devices never have to get permission to send
information to the ZyXEL Device.
Preamble
A preamble affects the timing in your wireless network. There are
two preamble modes: long and short. If a device uses a different
preamble mode than the ZyXEL Device does, it cannot communicate
with the ZyXEL Device.
Authentication
The process of verifying whether a wireless device is allowed to use
the wireless network.
Fragmentation
Threshold
A small fragmentation threshold is recommended for busy networks,
while a larger threshold provides faster performance if the network
is not very busy.
8.8.3 Wireless Security Overview
By their nature, radio communications are simple to intercept. For wireless data
networks, this means that anyone within range of a wireless network without
security can not only read the data passing over the airwaves, but also join the
network. Once an unauthorized person has access to the network, he or she can
steal information or introduce malware (malicious software) intended to
compromise the network. For these reasons, a variety of security systems have
been developed to ensure that only authorized people can use a wireless data
network, or understand the data carried on it.
These security standards do two things. First, they authenticate. This means that
only people presenting the right credentials (often a username and password, or a
“key” phrase) can access the network. Second, they encrypt. This means that the
information sent over the air is encoded. Only people with the code key can
understand the information, and only people who have been authenticated are
given the code key.
120
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
These security standards vary in effectiveness. Some can be broken, such as the
old Wired Equivalent Protocol (WEP). Using WEP is better than using no security at
all, but it will not keep a determined attacker out. Other security standards are
secure in themselves but can be broken if a user does not use them properly. For
example, the WPA-PSK security standard is very secure if you use a long key
which is difficult for an attacker’s software to guess - for example, a twenty-letter
long string of apparently random numbers and letters - but it is not very secure if
you use a short key which is very easy to guess - for example, a three-letter word
from the dictionary.
Because of the damage that can be done by a malicious attacker, it’s not just
people who have sensitive information on their network who should use security.
Everybody who uses any wireless network should ensure that effective security is
in place.
A good way to come up with effective security keys, passwords and so on is to use
obscure information that you personally will easily remember, and to enter it in a
way that appears random and does not include real words. For example, if your
mother owns a 1970 Dodge Challenger and her favorite movie is Vanishing Point
(which you know was made in 1971) you could use “70dodchal71vanpoi” as your
security key.
The following sections introduce different types of wireless security you can set up
in the wireless network.
8.8.3.1 SSID
Normally, the ZyXEL Device acts like a beacon and regularly broadcasts the SSID
in the area. You can hide the SSID instead, in which case the ZyXEL Device does
not broadcast the SSID. In addition, you should change the default SSID to
something that is difficult to guess.
This type of security is fairly weak, however, because there are ways for
unauthorized wireless devices to get the SSID. In addition, unauthorized wireless
devices can still see the information that is sent in the wireless network.
8.8.3.2 MAC Address Filter
Every device that can use a wireless network has a unique identification number,
called a MAC address.1 A MAC address is usually written using twelve hexadecimal
characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC
address for each device in the wireless network, see the device’s User’s Guide or
other documentation.
1.
Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks.
These kinds of wireless devices might not have MAC addresses.
2.
Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.
P-660HN-T1h User’s Guide
121
Chapter 8 Wireless LAN
You can use the MAC address filter to tell the ZyXEL Device which devices are
allowed or not allowed to use the wireless network. If a device is allowed to use
the wireless network, it still has to have the correct information (SSID, channel,
and security). If a device is not allowed to use the wireless network, it does not
matter if it has the correct information.
This type of security does not protect the information that is sent in the wireless
network. Furthermore, there are ways for unauthorized wireless devices to get the
MAC address of an authorized device. Then, they can use that MAC address to use
the wireless network.
8.8.3.3 User Authentication
Authentication is the process of verifying whether a wireless device is allowed to
use the wireless network. You can make every user log in to the wireless network
before using it. However, every device in the wireless network has to support IEEE
802.1x to do this.
For wireless networks, you can store the user names and passwords for each user
in a RADIUS server. This is a server used in businesses more than in homes. If you
do not have a RADIUS server, you cannot set up user names and passwords for
your users.
Unauthorized wireless devices can still see the information that is sent in the
wireless network, even if they cannot use the wireless network. Furthermore,
there are ways for unauthorized wireless users to get a valid user name and
password. Then, they can use that user name and password to use the wireless
network.
8.8.3.4 Encryption
Wireless networks can use encryption to protect the information that is sent in the
wireless network. Encryption is like a secret code. If you do not know the secret
code, you cannot understand the message.
The types of encryption you can choose depend on the type of authentication.
(See Section 8.8.3.3 on page 122 for information about this.)
Table 40 Types of Encryption for Each Type of Authentication
NO AUTHENTICATION RADIUS SERVER
Weakest
No Security
WPA
Static WEP
WPA-PSK
Strongest
122
WPA2-PSK
WPA2
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
For example, if the wireless network has a RADIUS server, you can choose WPA
or WPA2. If users do not log in to the wireless network, you can choose no
encryption, Static WEP, WPA-PSK, or WPA2-PSK.
Usually, you should set up the strongest encryption that every device in the
wireless network supports. For example, suppose you have a wireless network
with the ZyXEL Device and you do not have a RADIUS server. Therefore, there is
no authentication. Suppose the wireless network has two devices. Device A only
supports WEP, and device B supports WEP and WPA. Therefore, you should set up
Static WEP in the wireless network.
Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger
encryption. The other types of encryption are better than none at all, but it is still
possible for unauthorized wireless devices to figure out the original information
pretty quickly.
When you select WPA2 or WPA2-PSK in your ZyXEL Device, you can also select
an option (WPA compatible) to support WPA as well. In this case, if some of the
devices support WPA and some support WPA2, you should set up WPA2-PSK or
WPA2 (depending on the type of wireless network login) and select the WPA
compatible option in the ZyXEL Device.
Many types of encryption use a key to protect the information in the wireless
network. The longer the key, the stronger the encryption. Every device in the
wireless network must have the same key.
8.8.4 Signal Problems
Because wireless networks are radio networks, their signals are subject to
limitations of distance, interference and absorption.
Problems with distance occur when the two radios are too far apart. Problems with
interference occur when other radio waves interrupt the data signal. Interference
may come from other radio transmissions, such as military or air traffic control
communications, or from machines that are coincidental emitters such as electric
motors or microwaves. Problems with absorption occur when physical objects
(such as thick walls) are between the two radios, muffling the signal.
8.8.5 BSS
A Basic Service Set (BSS) exists when all communications between wireless
stations or between a wireless station and a wired network client go through one
access point (AP).
Intra-BSS traffic is traffic between wireless stations in the BSS. When Intra-BSS
traffic blocking is disabled, wireless station A and B can access the wired network
P-660HN-T1h User’s Guide
123
Chapter 8 Wireless LAN
and communicate with each other. When Intra-BSS traffic blocking is enabled,
wireless station A and B can still access the wired network but cannot
communicate with each other.
Figure 57 Basic Service set
8.8.6 MBSSID
Traditionally, you need to use different APs to configure different Basic Service
Sets (BSSs). As well as the cost of buying extra APs, there is also the possibility of
channel interference. The ZyXEL Device’s MBSSID (Multiple Basic Service Set
IDentifier) function allows you to use one access point to provide several BSSs
simultaneously. You can then assign varying QoS priorities and/or security modes
to different SSIDs.
Wireless devices can use different BSSIDs to associate with the same AP.
8.8.6.1 Notes on Multiple BSSs
• A maximum of eight BSSs are allowed on one AP simultaneously.
• You must use different keys for different BSSs. If two wireless devices have
different BSSIDs (they are in different BSSs), but have the same keys, they
may hear each other’s communications (but not communicate with each other).
• MBSSID should not replace but rather be used in conjunction with 802.1x
security.
124
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
8.8.7 Wireless Distribution System (WDS)
The ZyXEL Device can act as a wireless network bridge and establish WDS
(Wireless Distribution System) links with other APs. You need to know the MAC
addresses of the APs you want to link to. Once the security settings of peer sides
match one another, the connection between devices is made.
At the time of writing, WDS security is compatible with other ZyXEL access points
only. Refer to your other access point’s documentation for details.
The following figure illustrates how WDS link works between APs. Notebook
computer A is a wireless client connecting to access point AP 1. AP 1 has no
wired Internet connection, but it can establish a WDS link with access point AP 2,
which has a wired Internet connection. When AP 1 has a WDS link with AP 2, the
notebook computer can access the Internet through AP 2.
Figure 58 WDS Link Example
WDS
AP 1
AP 2
8.8.8 WiFi Protected Setup (WPS)
Your ZyXEL Device supports WiFi Protected Setup (WPS), which is an easy way to
set up a secure wireless network. WPS is an industry standard specification,
defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Each WPS connection works
between two devices. Both devices must support WPS (check each device’s
documentation to make sure).
Depending on the devices you have, you can either press a button (on the device
itself, or in its configuration utility) or enter a PIN (a unique Personal Identification
Number that allows one device to authenticate the other) in each of the two
devices. When WPS is activated on a device, it has two minutes to find another
device that also has WPS activated. Then, the two devices connect and set up a
secure network by themselves.
P-660HN-T1h User’s Guide
125
Chapter 8 Wireless LAN
8.8.8.1 Push Button Configuration
WPS Push Button Configuration (PBC) is initiated by pressing a button on each
WPS-enabled device, and allowing them to connect automatically. You do not need
to enter any information.
Not every WPS-enabled device has a physical WPS button. Some may have a WPS
PBC button in their configuration utilities instead of or in addition to the physical
button.
Take the following steps to set up WPS using the button.
Ensure that the two devices you want to set up are within wireless range of one
another.
Look for a WPS button on each device. If the device does not have one, log into its
configuration utility and locate the button (see the device’s User’s Guide for how to
do this - for the ZyXEL Device, see Section 8.5 on page 114).
Press the button on one of the devices (it doesn’t matter which). For the ZyXEL
Device you must press the WPS button for more than three seconds.
Within two minutes, press the button on the other device. The registrar sends the
network name (SSID) and security key through an secure connection to the
enrollee.
If you need to make sure that WPS worked, check the list of associated wireless
clients in the AP’s configuration utility. If you see the wireless client in the list,
WPS was successful.
8.8.8.2 PIN Configuration
Each WPS-enabled device has its own PIN (Personal Identification Number). This
may either be static (it cannot be changed) or dynamic (in some devices you can
generate a new PIN by clicking on a button in the configuration interface).
Use the PIN method instead of the push-button configuration (PBC) method if you
want to ensure that the connection is established between the devices you specify,
not just the first two devices to activate WPS in range of each other. However, you
need to log into the configuration interfaces of both devices to use the PIN
method.
When you use the PIN method, you must enter the PIN from one device (usually
the wireless client) into the second device (usually the Access Point or wireless
router). Then, when WPS is activated on the first device, it presents its PIN to the
second device. If the PIN matches, one device sends the network and security
information to the other, allowing it to join the network.
126
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
Take the following steps to set up a WPS connection between an access point or
wireless router (referred to here as the AP) and a client device using the PIN
method.
Ensure WPS is enabled on both devices.
Access the WPS section of the AP’s configuration interface. See the device’s User’s
Guide for how to do this.
Look for the client’s WPS PIN; it will be displayed either on the device, or in the
WPS section of the client’s configuration interface (see the device’s User’s Guide
for how to find the WPS PIN - for the ZyXEL Device, see Section 8.4 on page 113).
Enter the client’s PIN in the AP’s configuration interface.
If the client device’s configuration interface has an area for entering another
device’s PIN, you can either enter the client’s PIN in the AP, or enter the AP’s PIN
in the client - it does not matter which.
Start WPS on both devices within two minutes.
Use the configuration utility to activate WPS, not the push-button on the device
itself.
On a computer connected to the wireless client, try to connect to the Internet. If
you can connect, WPS was successful.
If you cannot connect, check the list of associated wireless clients in the AP’s
configuration utility. If you see the wireless client in the list, WPS was successful.
P-660HN-T1h User’s Guide
127
Chapter 8 Wireless LAN
The following figure shows a WPS-enabled wireless client (installed in a notebook
computer) connecting to the WPS-enabled AP via the PIN method.
Figure 59 Example WPS Process: PIN Method
ENROLLEE
REGISTRAR
WPS
This device’s
WPS PIN: 123456
WPS
Enter WPS PIN
from other device:
WPS
START
WPS
START
WITHIN 2 MINUTES
SECURE EAP TUNNEL
SSID
WPA(2)-PSK
COMMUNICATION
8.8.8.3 How WPS Works
When two WPS-enabled devices connect, each device must assume a specific role.
One device acts as the registrar (the device that supplies network and security
settings) and the other device acts as the enrollee (the device that receives
network and security settings. The registrar creates a secure EAP (Extensible
Authentication Protocol) tunnel and sends the network name (SSID) and the WPAPSK or WPA2-PSK pre-shared key to the enrollee. Whether WPA-PSK or WPA2-PSK
is used depends on the standards supported by the devices. If the registrar is
already part of a network, it sends the existing information. If not, it generates
the SSID and WPA(2)-PSK randomly.
128
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
The following figure shows a WPS-enabled client (installed in a notebook
computer) connecting to a WPS-enabled access point.
Figure 60 How WPS works
ACTIVATE
WPS
ACTIVATE
WPS
WITHIN 2 MINUTES
WPS HANDSHAKE
ENROLLEE
REGISTRAR
SECURE TUNNEL
SECURITY INFO
COMMUNICATION
The roles of registrar and enrollee last only as long as the WPS setup process is
active (two minutes). The next time you use WPS, a different device can be the
registrar if necessary.
The WPS connection process is like a handshake; only two devices participate in
each WPS transaction. If you want to add more devices you should repeat the
process with one of the existing networked devices and the new device.
Note that the access point (AP) is not always the registrar, and the wireless client
is not always the enrollee. All WPS-certified APs can be a registrar, and so can
some WPS-enabled wireless clients.
By default, a WPS devices is “unconfigured”. This means that it is not part of an
existing network and can act as either enrollee or registrar (if it supports both
functions). If the registrar is unconfigured, the security settings it transmits to the
enrollee are randomly-generated. Once a WPS-enabled device has connected to
another device using WPS, it becomes “configured”. A configured wireless client
can still act as enrollee or registrar in subsequent WPS connections, but a
configured access point can no longer act as enrollee. It will be the registrar in all
subsequent WPS connections in which it is involved. If you want a configured AP to
act as an enrollee, you must reset it to its factory defaults.
P-660HN-T1h User’s Guide
129
Chapter 8 Wireless LAN
8.8.8.4 Example WPS Network Setup
This section shows how security settings are distributed in an example WPS setup.
The following figure shows an example network. In step 1, both AP1 and Client 1
are unconfigured. When WPS is activated on both, they perform the handshake. In
this example, AP1 is the registrar, and Client 1 is the enrollee. The registrar
randomly generates the security information to set up the network, since it is
unconfigured and has no existing information.
Figure 61 WPS: Example Network Step 1
ENROLLEE
REGISTRAR
SECURITY INFO
AP1
CLIENT 1
In step 2, you add another wireless client to the network. You know that Client 1
supports registrar mode, but it is better to use AP1 for the WPS handshake with
the new client since you must connect to the access point anyway in order to use
the network. In this case, AP1 must be the registrar, since it is configured (it
already has security information for the network). AP1 supplies the existing
security information to Client 2.
Figure 62 WPS: Example Network Step 2
REGISTRAR
EXISTING CONNECTION
AP1
CLIENT 1
ENROLLEE
YI
RIT
SE
NF
CLIENT 2
In step 3, you add another access point (AP2) to your network. AP2 is out of
range of AP1, so you cannot use AP1 for the WPS handshake with the new access
130
P-660HN-T1h User’s Guide
Chapter 8 Wireless LAN
point. However, you know that Client 2 supports the registrar function, so you use
it to perform the WPS handshake instead.
Figure 63 WPS: Example Network Step 3
EXISTING CONNECTION
CLIENT 1
TIO
EC
ON
GC
XIS
AP1
REGISTRAR
CLIENT 2
SE
CU
RIT
ENROLLEE
INF
AP2
8.8.8.5 Limitations of WPS
WPS has some limitations of which you should be aware.
• WPS works in Infrastructure networks only (where an AP and a wireless client
communicate). It does not work in Ad-Hoc networks (where there is no AP).
• When you use WPS, it works between two devices only. You cannot enroll
multiple devices simultaneously, you must enroll one after the other.
For instance, if you have two enrollees and one registrar you must set up the
first enrollee (by pressing the WPS button on the registrar and the first enrollee,
for example), then check that it successfully enrolled, then set up the second
device in the same way.
• WPS works only with other WPS-enabled devices. However, you can still add
non-WPS devices to a network you already set up using WPS.
WPS works by automatically issuing a randomly-generated WPA-PSK or WPA2PSK pre-shared key from the registrar device to the enrollee devices. Whether
the network uses WPA-PSK or WPA2-PSK depends on the device. You can check
the configuration interface of the registrar device to discover the key the
network is using (if the device supports this feature). Then, you can enter the
key into the non-WPS device and join the network as normal (the non-WPS
device must also support WPA-PSK or WPA2-PSK).
P-660HN-T1h User’s Guide
131
Chapter 8 Wireless LAN
• When you use the PBC method, there is a short period (from the moment you
press the button on one device to the moment you press the button on the
other device) when any WPS-enabled device could join the network. This is
because the registrar has no way of identifying the “correct” enrollee, and
cannot differentiate between your enrollee and a rogue device. This is a possible
way for a hacker to gain access to a network.
You can easily check to see if this has happened. WPS works between only two
devices simultaneously, so if another device has enrolled your device will be
unable to enroll, and will not have access to the network. If this happens, open
the access point’s configuration interface and look at the list of associated
clients (usually displayed by MAC address). It does not matter if the access
point is the WPS registrar, the enrollee, or was not involved in the WPS
handshake; a rogue device must still associate with the access point to gain
access to the network. Check the MAC addresses of your wireless clients
(usually printed on a label on the bottom of the device). If there is an unknown
MAC address you can remove it or reset the AP.
132
P-660HN-T1h User’s Guide
CHAPTER
Network Address Translation
(NAT)
9.1 Overview
This chapter discusses how to configure NAT on the ZyXEL Device. NAT (Network
Address Translation - NAT, RFC 1631) is the translation of the IP address of a host
in a packet, for example, the source address of an outgoing packet, used within
one network to a different IP address known within another network.
9.1.1 What You Can Do in the NAT Screens
• Use the NAT General Setup screen (Section 9.2 on page 135) to configure the
NAT setup settings.
• Use the Port Forwarding screen (Section 9.3 on page 136) to configure
forward incoming service requests to the server(s) on your local network.
• Use the Address Mapping screen (Section 9.4 on page 140) to change your
ZyXEL Device’s address mapping settings.
• Use the ALG screen (Section 9.5 on page 143) to enable and disable the SIP
(VoIP) ALG in the ZyXEL Device.
9.1.2 What You Need To Know About NAT
Inside/Outside
Inside/outside denotes where a host is located relative to the ZyXEL Device, for
example, the computers of your subscribers are the inside hosts, while the web
servers on the Internet are the outside hosts.
Global/Local
Global/local denotes the IP address of a host in a packet as the packet traverses a
router, for example, the local address refers to the IP address of a host when the
packet is in the local network, while the global address refers to the IP address of
the host when the same packet is traveling in the WAN side.
P-660HN-T1h User’s Guide
133
Chapter 9 Network Address Translation (NAT)
NAT
In the simplest form, NAT changes the source IP address in a packet received from
a subscriber (the inside local address) to another (the inside global address)
before forwarding the packet to the WAN side. When the response comes back,
NAT translates the destination address (the inside global address) back to the
inside local address before forwarding it to the original inside host.
Port Forwarding
A port forwarding set is a list of inside (behind NAT on the LAN) servers, for
example, web or FTP, that you can make visible to the outside world even though
NAT makes your whole inside network appear as a single computer to the outside
world.
SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that
supports two types of mapping, Many-to-One and Server. The ZyXEL Device also
supports Full Feature NAT to map multiple global IP addresses to multiple private
LAN IP addresses of clients or servers using mapping types as outlined in Table 48
on page 147.
• Choose SUA Only if you have just one public WAN IP address for your ZyXEL
Device.
• Choose Full Feature if you have multiple public WAN IP addresses for your
ZyXEL Device.
Finding Out More
See Section 9.6 on page 144 for advanced technical information on NAT.
134
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
9.2 The NAT General Setup Screen
Use this screen to activate NAT. Click Network > NAT to open the following
screen.
Note: You must create a firewall rule in addition to setting up SUA/NAT, to allow traffic
from the WAN to be forwarded through the ZyXEL Device.
Figure 64 Network > NAT > General
The following table describes the labels in this screen.
Table 41 Network > NAT > General
LABEL
DESCRIPTION
Active Network
Address
Translation
Select this check box to enable NAT.
SUA Only
Select this radio button if you have just one public WAN IP address for
your ZyXEL Device.
Full Feature
Select this radio button if you have multiple public WAN IP addresses for
your ZyXEL Device.
Max NAT/
Firewall Session
Per User
When computers use peer to peer applications, such as file sharing
applications, they need to establish NAT sessions. If you do not limit the
number of NAT sessions a single client can establish, this can result in
all of the available NAT sessions being used. In this case, no additional
NAT sessions can be established, and users may not be able to access
the Internet.
Each NAT session establishes a corresponding firewall session. Use this
field to limit the number of NAT/Firewall sessions client computers can
establish through the ZyXEL Device.
If your network has a small number of clients using peer to peer
applications, you can raise this number to ensure that their
performance is not degraded by the number of NAT sessions they can
establish. If your network has a large number of users using peer to
peer applications, you can lower this number to ensure no single client
is exhausting all of the available NAT sessions.
P-660HN-T1h User’s Guide
135
Chapter 9 Network Address Translation (NAT)
Table 41 Network > NAT > General (continued)
LABEL
DESCRIPTION
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
9.3 The Port Forwarding Screen
Note: This screen is available only when you select SUA only in the NAT > General
screen.
Use this screen to forward incoming service requests to the server(s) on your local
network.
You may enter a single port number or a range of port numbers to be forwarded,
and the local IP address of the desired server. The port number identifies a
service; for example, web service is on port 80 and FTP on port 21. In some
cases, such as for unknown services or where one server can support more than
one service (for example both FTP and web service), it might be better to specify
a range of port numbers. You can allocate a server IP address that corresponds to
a port or a range of ports.
The most often used port numbers and services are shown in Appendix E on page
305. Please refer to RFC 1700 for further information about port numbers.
Note: Many residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP may
periodically check for servers and may suspend your account if it discovers any
active services at your location. If you are unsure, refer to your ISP.
Default Server IP Address
In addition to the servers for specified services, NAT supports a default server IP
address. A default server receives packets from ports that are not specified in this
screen.
Note: If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
136
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
Configuring Servers Behind Port Forwarding (Example)
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in
the example), port 80 to another (B in the example) and assign a default server IP
address of 192.168.1.35 to a third (C in the example). You assign the LAN IP
addresses and the ISP assigns the WAN IP address. The NAT network appears as a
single host on the Internet.
Figure 65 Multiple Servers Behind NAT Example
A=192.168.1.33
WAN
LAN
B=192.168.1.34
192.168.1.1
C=192.168.1.35
IP Address assigned by ISP
D=192.168.1.36
9.3.1 Configuring the Port Forwarding Screen
Click Network > NAT > Port Forwarding to open the following screen.
See Appendix E on page 305 for port numbers commonly used for particular
services.
Figure 66 Network > NAT > Port Forwarding
P-660HN-T1h User’s Guide
137
Chapter 9 Network Address Translation (NAT)
The following table describes the fields in this screen.
Table 42 Network > NAT > Port Forwarding
LABEL
DESCRIPTION
Default Server Setup
Default Server
In addition to the servers for specified services, NAT supports a default
server. A default server receives packets from ports that are not
specified in this screen. If you do not assign a Default Server IP
address, the ZyXEL Device discards all packets received for ports that
are not specified here or in the remote management setup.
Port Forwarding
Service Name
Select a service from the drop-down list box.
Server IP
Address
Enter the IP address of the server for the specified service.
Add
Click this button to add a rule to the table below.
This is the rule index number (read-only).
Active
This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable
it.
Service Name
This is a service’s name.
Start Port
This is the first port number that identifies a service.
End Port
This is the last port number that identifies a service.
Port Translation
This is the start/end port number that the device translates.
Start/End Port
Server IP
Address
This is the server’s IP address.
Modify
Click the edit icon to go to the screen where you can edit the port
forwarding rule.
Click the delete icon to delete an existing port forwarding rule. Note that
subsequent address mapping rules move up by one when you take this
action.
138
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
9.3.2 The Port Forwarding Rule Edit Screen
Use this screen to edit a port forwarding rule. Click the rule’s edit icon in the Port
Forwarding screen to display the screen shown next.
Figure 67 Network > NAT > Port Forwarding: Edit
The following table describes the fields in this screen.
Table 43 Network > NAT > Port Forwarding: Edit
LABEL
DESCRIPTION
Rule Setup
Active
Click this check box to enable the rule.
Service Name
Enter a name to identify this port-forwarding rule.
Start Port
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port
field.
To forward a series of ports, enter the start port number here and the end
port number in the End Port field.
End Port
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port
field above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that
begins with the port number in the Start Port field above.
Server IP
Address
Enter the inside IP address of the server here.
Port
Translation
Start / End
Port
Enter the start port number here to which you want the device to
translate the incoming port. For a range of ports, you only need to enter
the first number of the range to which you want the incoming ports
translated, the device automatically calculates the last port of the
translated port range.
Back
Click this to return to the previous screen without saving.
P-660HN-T1h User’s Guide
139
Chapter 9 Network Address Translation (NAT)
Table 43 Network > NAT > Port Forwarding: Edit (continued)
LABEL
DESCRIPTION
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
9.4 The Address Mapping Screen
Note: The Address Mapping screen is available only when you select Full Feature
in the NAT > General screen.
Ordering your rules is important because the ZyXEL Device applies the rules in the
order that you specify. When a rule matches the current packet, the ZyXEL Device
takes the corresponding action and the remaining rules are ignored. If there are
any empty rules before your new configured rule, your configured rule will be
pushed up by that number of empty rules. For example, if you have already
configured rules 1 to 6 in your current set and now you configure rule number 9.
In the set summary screen, the new rule will be rule 7, not 9. Now if you delete
rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new
rules 4, 5 and 6.
To change your ZyXEL Device’s address mapping settings, click Network > NAT
> Address Mapping to open the following screen.
Figure 68 Network > NAT > Address Mapping
140
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
The following table describes the fields in this screen.
Table 44 Network > NAT > Address Mapping
LABEL
DESCRIPTION
This is the rule index number.
Local Start IP
This is the starting Inside Local IP Address (ILA). Local IP addresses are
N/A for Server port mapping.
Local End IP
This is the end Inside Local IP Address (ILA). If the rule is for all local IP
addresses, then this field displays 0.0.0.0 as the Local Start IP address
and 255.255.255.255 as the Local End IP address. This field is N/A for
One-to-one and Server mapping types.
Global Start
IP
This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if
you have a dynamic IP address from your ISP. You can only do this for
Many-to-One and Server mapping types.
Global End IP
This is the ending Inside Global IP Address (IGA). This field is N/A for
One-to-one, Many-to-One and Server mapping types.
Type
1-1: One-to-one mode maps one local IP address to one global IP
address. Note that port numbers do not change for the One-to-one NAT
mapping type.
M-1: Many-to-One mode maps multiple local IP addresses to one global
IP address. This is equivalent to SUA (i.e., PAT, port address translation),
ZyXEL's Single User Account feature that previous ZyXEL routers
supported only.
M-M Ov (Overload): Many-to-Many Overload mode maps multiple local
IP addresses to shared global IP addresses.
MM No (No Overload): Many-to-Many No Overload mode maps each local
IP address to unique global IP addresses.
Server: This type allows you to specify inside servers of different
services behind the NAT to be accessible to the outside world.
Modify
Click the edit icon to go to the screen where you can edit the address
mapping rule.
Click the delete icon to delete an existing address mapping rule. Note that
subsequent address mapping rules move up by one when you take this
action.
P-660HN-T1h User’s Guide
141
Chapter 9 Network Address Translation (NAT)
9.4.1 The Address Mapping Rule Edit Screen
Use this screen to edit an address mapping rule. Click the rule’s edit icon in the
Address Mapping screen to display the screen shown next.
Figure 69 Network > NAT > Address Mapping: Edit
The following table describes the fields in this screen.
Table 45 Network > NAT > Address Mapping: Edit
LABEL
DESCRIPTION
Type
Choose the port mapping type from one of the following.
One-to-One: One-to-One mode maps one local IP address to one global
IP address. Note that port numbers do not change for One-to-one NAT
mapping type.
Many-to-One: Many-to-One mode maps multiple local IP addresses to
one global IP address. This is equivalent to SUA (i.e., PAT, port address
translation), ZyXEL's Single User Account feature that previous ZyXEL
routers supported only.
Many-to-Many Overload: Many-to-Many Overload mode maps multiple
local IP addresses to shared global IP addresses.
Many-to-Many No Overload: Many-to-Many No Overload mode maps
each local IP address to unique global IP addresses.
Server: This type allows you to specify inside servers of different services
behind the NAT to be accessible to the outside world.
Local Start IP
This is the starting local IP address (ILA). Local IP addresses are N/A for
Server port mapping.
Local End IP
This is the end local IP address (ILA). If your rule is for all local IP
addresses, then enter 0.0.0.0 as the Local Start IP address and
255.255.255.255 as the Local End IP address.
This field is N/A for One-to-One and Server mapping types.
Global Start
IP
142
This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have
a dynamic IP address from your ISP.
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
Table 45 Network > NAT > Address Mapping: Edit (continued)
LABEL
DESCRIPTION
Global End IP
This is the ending global IP address (IGA). This field is N/A for One-toOne, Many-to-One and Server mapping types.
Server
Mapping Set
Click this link to go to the Port Forwarding screen to edit a port
forwarding set that you have selected in the Server Mapping Set field.
Edit Details
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
9.5 The ALG Screen
Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG
allows SIP calls to pass through NAT by examining and translating IP addresses
embedded in the data stream. When the ZyXEL Device registers with the SIP
register server, the SIP ALG translates the ZyXEL Device’s private IP address
inside the SIP data stream to a public IP address. You do not need to use STUN or
an outbound proxy if your ZyXEL Device is behind a SIP ALG.
Use this screen to enable and disable the SIP (VoIP) ALG in the ZyXEL Device. To
access this screen, click Network > NAT > ALG.
Figure 70 Network > NAT > ALG
The following table describes the fields in this screen.
Table 46 Network > NAT > ALG
LABEL
DESCRIPTION
Enable SIP ALG
Select this to make sure SIP (VoIP) works correctly with portforwarding and address-mapping rules.
Apply
Click this to save your changes.
Reset
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
143
Chapter 9 Network Address Translation (NAT)
9.6 NAT Technical Reference
This chapter contains more information regarding NAT.
9.6.1 NAT Definitions
Inside/outside denotes where a host is located relative to the ZyXEL Device, for
example, the computers of your subscribers are the inside hosts, while the web
servers on the Internet are the outside hosts.
Global/local denotes the IP address of a host in a packet as the packet traverses a
router, for example, the local address refers to the IP address of a host when the
packet is in the local network, while the global address refers to the IP address of
the host when the same packet is traveling in the WAN side.
Note that inside/outside refers to the location of a host, while global/local refers to
the IP address of a host used in a packet. Thus, an inside local address (ILA) is the
IP address of an inside host in a packet when the packet is still in the local
network, while an inside global address (IGA) is the IP address of the same inside
host when the packet is on the WAN side. The following table summarizes this
information.
Table 47 NAT Definitions
ITEM
DESCRIPTION
Inside
This refers to the host on the LAN.
Outside
This refers to the host on the WAN.
Local
This refers to the packet address (source or destination) as the packet travels
on the LAN.
Global
This refers to the packet address (source or destination) as the packet travels
on the WAN.
NAT never changes the IP address (either local or global) of an outside host.
9.6.2 What NAT Does
In the simplest form, NAT changes the source IP address in a packet received from
a subscriber (the inside local address) to another (the inside global address)
before forwarding the packet to the WAN side. When the response comes back,
NAT translates the destination address (the inside global address) back to the
inside local address before forwarding it to the original inside host. Note that the
IP address (either local or global) of an outside host is never changed.
The global IP addresses for the inside hosts can be either static or dynamically
assigned by the ISP. In addition, you can designate servers, for example, a web
server and a telnet server, on your local network and make them accessible to the
144
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
outside world. If you do not define any servers (for Many-to-One and Many-toMany Overload mapping – see Table 48 on page 147), NAT offers the additional
benefit of firewall protection. With no servers defined, your ZyXEL Device filters
out all incoming inquiries, thus preventing intruders from probing your network.
For more information on IP address translation, refer to RFC 1631, The IP Network
Address Translator (NAT).
9.6.3 How NAT Works
Each packet has two addresses – a source address and a destination address. For
outgoing packets, the ILA (Inside Local Address) is the source address on the LAN,
and the IGA (Inside Global Address) is the source address on the WAN. For
incoming packets, the ILA is the destination address on the LAN, and the IGA is
the destination address on the WAN. NAT maps private (local) IP addresses to
globally unique ones required for communication with hosts on other networks. It
replaces the original IP source address (and TCP or UDP source port numbers for
Many-to-One and Many-to-Many Overload NAT mapping) in each packet and then
forwards it to the Internet. The ZyXEL Device keeps track of the original addresses
and port numbers so incoming reply packets can have their original values
restored. The following figure illustrates this.
Figure 71 How NAT Works
NAT Table
LAN
Inside Local
IP Address
192.168.1.10
192.168.1.11
192.168.1.12
192.168.1.13
192.168.1.13
192.168.1.12
SA
SA
192.168.1.10
IGA1
Inside Local
Address (ILA)
192.168.1.11
P-660HN-T1h User’s Guide
Inside Global
IP Address
IGA 1
IGA 2
IGA 3
IGA 4
WAN
Inside Global
Address (IGA)
192.168.1.10
145
Chapter 9 Network Address Translation (NAT)
9.6.4 NAT Application
The following figure illustrates a possible NAT application, where three inside LANs
(logical LANs using IP alias) behind the ZyXEL Device can communicate with three
distinct WAN networks.
Figure 72 NAT Application With IP Alias
9.6.5 NAT Mapping Types
NAT supports five types of IP/port mapping. They are:
• One to One: In One-to-One mode, the ZyXEL Device maps one local IP address
to one global IP address.
• Many to One: In Many-to-One mode, the ZyXEL Device maps multiple local IP
addresses to one global IP address. This is equivalent to SUA (for instance, PAT,
port address translation), ZyXEL’s Single User Account feature that previous
ZyXEL routers supported (the SUA Only option in today’s routers).
• Many to Many Overload: In Many-to-Many Overload mode, the ZyXEL Device
maps the multiple local IP addresses to shared global IP addresses.
• Many-to-Many No Overload: In Many-to-Many No Overload mode, the ZyXEL
Device maps each local IP address to a unique global IP address.
• Server: This type allows you to specify inside servers of different services
behind the NAT to be accessible to the outside world.
146
P-660HN-T1h User’s Guide
Chapter 9 Network Address Translation (NAT)
Port numbers do NOT change for One-to-One and Many-to-Many No Overload
NAT mapping types.
The following table summarizes these types.
Table 48 NAT Mapping Types
TYPE
IP MAPPING
One-to-One
ILA1 IGA1
Many-to-One (SUA/PAT)
ILA1 IGA1
ILA2 IGA1
…
Many-to-Many Overload
ILA1 IGA1
ILA2 IGA2
ILA3 IGA1
ILA4 IGA2
…
Many-to-Many No Overload
ILA1 IGA1
ILA2 IGA2
ILA3 IGA3
…
Server
Server 1 IP IGA1
Server 2 IP IGA1
Server 3 IP IGA1
P-660HN-T1h User’s Guide
147
Chapter 9 Network Address Translation (NAT)
148
P-660HN-T1h User’s Guide
CHAPTER
10
Firewall
10.1 Overview
This chapter shows you how to enable the ZyXEL Device firewall. Use the firewall
to protect your ZyXEL Device and network from attacks by hackers on the Internet
and control access to it. By default the firewall:
• allows traffic that originates from your LAN computers to go to all other
networks.
• blocks traffic that originates on other networks from going to the LAN.
• blocks SYN and port scanner attacks.
By default, the ZyXEL Device blocks DDOS, LAND and Ping of Death attacks
whether the firewall is enabled or disabled.
10.1.1 What You Can Do in the Firewall Screens
Use the Firewall screen (Section 10.2 on page 151) to enable firewall and/or SPI
on the ZyXEL Device.
10.1.2 What You Need to Know About Firewall
SYN Attack
A SYN attack floods a targeted system with a series of SYN packets. Each packet
causes the targeted system to issue a SYN-ACK response. While the targeted
system waits for the ACK that follows the SYN-ACK, it queues up all outstanding
SYN-ACK responses on a backlog queue. SYN-ACKs are moved off the queue only
when an ACK comes back or when an internal timer terminates the three-way
handshake. Once the queue is full, the system will ignore all incoming SYN
requests, making the system unavailable for legitimate users.
DoS
Denials of Service (DoS) attacks are aimed at devices and networks with a
connection to the Internet. Their goal is not to steal information, but to disable a
P-660HN-T1h User’s Guide
149
Chapter 10 Firewall
device or network so users no longer have access to network resources. The
ZyXEL Device is pre-configured to automatically detect and thwart all known DoS
attacks.
DDoS
A DDoS attack is one in which multiple compromised systems attack a single
target, thereby causing denial of service for users of the targeted system.
LAND Attack
In a LAND attack, hackers flood SYN packets into the network with a spoofed
source IP address of the target system. This makes it appear as if the host
computer sent the packets to itself, making the system unavailable while the
target system tries to respond to itself.
Ping of Death
Ping of Death uses a "ping" utility to create and send an IP packet that exceeds
the maximum 65,536 bytes of data allowed by the IP specification. This may
cause systems to crash, hang or reboot.
SPI
Stateful Packet Inspection (SPI) tracks each connection crossing the firewall and
makes sure it is valid. Filtering decisions are based not only on rules but also
context. For example, traffic from the WAN may only be allowed to cross the
firewall in response to a request from the LAN.
150
P-660HN-T1h User’s Guide
Chapter 10 Firewall
10.2 The Firewall Screen
Use this screen to enable firewall and/or SPI. Click Advanced Setup > Firewall
to display the following screen.
Figure 73 Advanced Setup > Firewall
The following table describes the labels in this screen.
Table 49 Advanced > Firewall
LABEL
DESCRIPTION
Firewall
Use this field to enable or disable firewall on your ZyXEL Device.
SPI
Use this field to enable or disable SPI on your ZyXEL Device.
SAVE
Click this to save your changes.
CANCEL
Click this to restore your previously saved settings.
Enabling SPI blocks all traffic initiated from the WAN side,
including the DMZ, virtual server and ACL on the WAN side.
P-660HN-T1h User’s Guide
151
Chapter 10 Firewall
152
P-660HN-T1h User’s Guide
CHAPTER
11
Filters
11.1 Overview
This chapter introduces three types of filters supported by the ZyXEL Device. You
can configure rules to restrict traffic by IP addresses, MAC addresses, application
types and/or URLs.
11.1.1 What You Can Do in the Filter Screens
• Use the URL Filter screen (Section 11.2 on page 154) to block access to web
sites.
• Use the Application Filter screen (Section 11.3 on page 155) to allow or deny
traffic from certain types of applications.
• Use the IP/MAC Filter screen (Section 11.4 on page 156) to create IP/MAC
filter rules.
11.1.2 What You Need to Know About Filtering
URL
The URL (Uniform Resource Locator) identifies and helps locates resources on a
network. On the Internet the URL is the web address that you type in the address
bar of your Internet browser, for example “http://www.zyxel.com”.
IP/MAC Filter Structure
An IP/MAC filter set consists of one or more filter rules. The ZyXEL Device allows
you to configure up to twelve filter sets with six rules in each set, for a total of 72
filter rules in the system.
P-660HN-T1h User’s Guide
153
Chapter 11 Filters
11.2 The URL Filter Screen
Use this screen to block websites by URL. Click Security > Filter > URL Filter.
The screen appears as shown.
Figure 74 Security > Filter > URL Filter
The following table describes the labels in this screen.
Table 50 Access Management > Filter (URL)
LABEL
DESCRIPTION
URL Filter Editing
Active
Use this field to enable or disable the URL filter.
URL Index
Select the index number of the filter.
URL
Enter the URL for the ZyXEL Device to block.
URL Filter Listing
154
Index
This is the index number of the filter rule.
URL
This is the URL you have configured the ZyXEL Device to block.
Apply
Click this to save your changes.
Delete
Click this to remove the filter rule.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
Chapter 11 Filters
11.3 The Application Filter Screen
Use this screen to allow or deny traffic for certain types of applications. The
application filter provides a convenient way to manage the use of various
applications on the network.
Click Security > Filter > Application Filter. The screen appears as shown.
Figure 75 Security > Filter > Application Filter
The following table describes the labels in this screen.
Table 51 Access Management > Filter (Application)
LABEL
DESCRIPTION
Application Filter Editing
Application Filter
Use this field to enable or disable the application filter.
ICQ
Use this field to allow or deny ICQ traffic.
MSN
Use this field to allow or deny MSN traffic.
YMSG
Use this field to allow or deny Yahoo Messenger traffic
Real Audio/Video
Use this field to allow or deny transferring RealPlayer format
files.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
155
Chapter 11 Filters
11.4 The IP/MAC Filter Screen
Use this screen to create and apply IP/MAC filters. Click Security > Filter > IP/
MAC Filter. The screen appears as shown.
Figure 76 Security > Filter > IP/MAC Filter
The following table describes the labels in this screen.
Table 52 Access Management > Filter (IP/MAC)
LABEL
DESCRIPTION
IP/MAC Filter Set Editing
IP/MAC Filter Set Index
Select the index number of the filter set.
Interface
Select the PVC to which to apply the filter.
Direction
Apply the filter to Both, Incoming or Outgoing traffic
direction.
IP/MAC Filter Rule Editing
IP/MAC Filter Rule
Index
156
Select the index number of the filter rule.
P-660HN-T1h User’s Guide
Chapter 11 Filters
Table 52 Access Management > Filter (IP/MAC) (continued)
LABEL
DESCRIPTION
Rule Type
Select IP or MAC type to configure the rule.
Use the IP Filter to block traffic by IP addresses.
Use the MAC Filter to block traffic by MAC address.
Active
Use this field to enable or disable the rule.
Source IP Address
Enter the source IP address of the packets you wish to filter.
This field is ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the source IP address
Port Number
Enter the source port of the packets that you wish to filter. The
range of this field is 0 to 65535. This field is ignored if it is 0.
Destination IP Address
Enter the destination IP address of the packets you wish to
filter. This field is ignored if it is 0.0.0.0.
Subnet Mask
Enter the IP subnet mask for the destination IP address.
Port Number
Enter the destination port of the packets that you wish to filter.
The range of this field is 0 to 65535. This field is ignored if it is
0.
Protocol
Select ICMP, TCP or UDP for the upper layer protocol.
MAC Address
This field is only available when you select MAC in the Rule
Type field.
Enter the MAC address of the packets you wish to filter.
Rule Unmatched
Select the action for a packet not matching the rule.
Select Forward to forward traffic immediately and skip
checking the remaining rules. Select Next to check the next
rule.
IP/MAC Filter Listing
IP/MAC Filter Set Index
Select the index number of the filter set from the drop-downl
list box.
Interface
This is the interface that the filter set applies to.
Direction
The filter set applies to this traffic direction.
This is the index number of the rule in a filter set.
Active
This field shows whether the rule is activated.
Src Address/Mask
This is the source IP address and subnet mask when you select
IP as the rule type.
This is the MAC address when you select MAC as the rule type.
Dest IP/Mask
This is the destination IP address and subnet mask.
Src Port
This is the source port number.
Dest Port
This is the destination port number.
Protocol
This is the upper layer protocol.
Unmatched
When a packet doesn’t match the rule, this is the action the
ZyXEL Device takes on the packet.
SAVE
Click this to save your changes.
P-660HN-T1h User’s Guide
157
Chapter 11 Filters
Table 52 Access Management > Filter (IP/MAC) (continued)
158
LABEL
DESCRIPTION
DELETE
Click this to remove the filter rule.
CANCEL
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
CHAPTER
12
Static Route
12.1 Overview
The ZyXEL Device usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the ZyXEL Device send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL
Device’s LAN interface. The ZyXEL Device routes most traffic from A to the
Internet through the ZyXEL Device’s default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 77 Example of Static Routing Topology
R1
LAN
WAN
R3
R2
P-660HN-T1h User’s Guide
159
Chapter 12 Static Route
12.1.1 What You Can Do in the Static Route Screens
Use the Static Route screens (Section 12.2 on page 160) to view and configure
IP static routes on the ZyXEL Device.
12.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to
open the Static Route screen.
Figure 78 Advanced > Static Route
The following table describes the labels in this screen.
Table 53 Advanced > Static Route
160
LABEL
DESCRIPTION
This is the number of an individual static route.
Destination
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Netmask
This parameter specifies the IP network subnet mask of the final
destination.
Gateway
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
P-660HN-T1h User’s Guide
Chapter 12 Static Route
Table 53 Advanced > Static Route
LABEL
DESCRIPTION
Modify
Click the Edit icon to go to the screen where you can set up a static route
on the ZyXEL Device.
Click the Remove icon to remove a static route from the ZyXEL Device. A
window displays asking you to confirm that you want to delete the route.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
12.2.1 Static Route Edit
Use this screen to configure the required information for a static route. Select a
static route index number and click Edit. The screen shown next appears.
Figure 79 Advanced > Static Route: Edit
The following table describes the labels in this screen.
Table 54 Advanced > Static Route: Edit
LABEL
DESCRIPTION
Static Route Setup
Destination IP
Address
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a
route to a single host, use a subnet mask of 255.255.255.255 in the
subnet mask field to force the network number to be identical to the host
ID.
IP Subnet
Mask
Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is a router or switch on
the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
161
Chapter 12 Static Route
162
P-660HN-T1h User’s Guide
CHAPTER
13
802.1Q/1P
13.1 Overview
This chapter describes how to configure the 802.1Q/1P settings.
A Virtual Local Area Network (VLAN) allows a physical network to be partitioned
into multiple logical networks. A VLAN group can be treated as an individual
device. Each group can have its own rules about where and how to forward traffic.
You can assign any ports on the ZyXEL Device to a VLAN group and configure the
settings for the group. You may also set the priority level for traffic trasmitted
through the ports.
Figure 80 802.1Q/1P
802.1Q
Ports
VLAN Groups
802.1P
Priority Levels
13.1.1 What You Can Do in the 802.1Q/1P Screens
• Use the Group Setting screen (Section 13.2 on page 164) to activate 802.1Q/
1P, specify the management VLAN group, display the VLAN groups and
configure the settings for each VLAN group.
• Use the Port Setting screen (Section 13.3 on page 167) to configure the PVID
for each port.
13.1.2 What You Need to Know About 802.1Q/1P
IEEE 802.1P Priority
IEEE 802.1P specifies the user priority field and defines up to eight separate traffic
types by inserting a tag into a MAC-layer frame that contains bits to define class of
service.
P-660HN-T1h User’s Guide
163
Chapter 13 802.1Q/1P
IEEE 802.1Q Tagged VLAN
Tagged VLAN uses an explicit tag (VLAN ID) in the MAC header to identify the
VLAN membership of a frame across bridges - they are not confined to the device
on which they were created. The VLAN ID associates a frame with a specific VLAN
and provides the information that devices need to process the frame across the
network.
PVC
A virtual circuit is a logical point-to-point circuit between customer sites.
Permanent means that the circuit is preprogrammed by the carrier as a path
through the network. It does not need to be set up or torn down for each session.
Forwarding Tagged and Untagged Frames
Each port on the device is capable of passing tagged or untagged frames. To
forward a frame from an 802.1Q VLAN-aware device to an 802.1Q VLAN-unaware
device, the ZyXEL Device first decides where to forward the frame and then strips
off the VLAN tag. To forward a frame from an 802.1Q VLAN-unaware device to an
802.1Q VLAN-aware switch, the ZyXEL Device first decides where to forward the
frame, and then inserts a VLAN tag reflecting the ingress port's default VID. The
default PVID is VLAN 1 for all ports, but this can be changed.
Whether to tag an outgoing frame depends on the setting of the egress port on a
per-VLAN, per-port basis (recall that a port can belong to multiple VLANs). If the
tagging on the egress port is enabled for the VID of a frame, then the frame is
transmitted as a tagged frame; otherwise, it is transmitted as an untagged frame.
13.2 The 802.1Q/1P Group Setting Screen
Use this screen to activate 802.1Q/1P and display the VLAN groups. Click
Advanced > 802.1Q/1P to display the following screen.
164
P-660HN-T1h User’s Guide
Chapter 13 802.1Q/1P
Note: If the WAN interface in the VLAN group is not the default router, you need to
create a static route to communicate with the WAN.
Figure 81 Advanced > 802.1Q/1P > Group Setting
The following table describes the labels in this screen.
Table 55 Advanced > 802.1Q/1P > Group Setting
LABEL
DESCRIPTION
802.1Q/1P
Active
Select this check box to activate the 802.1P/1Q feature.
Summary
This field displays the index number of the VLAN group.
Active
This field displays whether 802.1P/1Q is active for the VLAN group.
VID
This field displays the ID number of the VLAN group.
Port Number
These columns display the VLAN’s settings for each port. A tagged
port is marked as T, an untagged port is marked as U and ports not
participating in a VLAN are marked as “–“.
Modify
Click the Edit button to configure the the ports in the VLAN group.
Click the Remove button to delete the VLAN group.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
165
Chapter 13 802.1Q/1P
13.2.1 Editing 802.1Q/1P Group Setting
Use this screen to configure the settings for each VLAN group.
In the 802.1Q/1P screen, click the Edit button from the Modify filed to display
the following screen.
Figure 82 Advanced > 802.1Q/1P > Group Setting > Edit
The following table describes the labels in this screen.
Table 56 Advanced > 802.1Q/1P > Group Setting > Edit
LABEL
DESCRIPTION
Active
Select this check box to activate the group setting.
VLAN ID
Assign a VLAN ID for the VLAN group. The valid VID range is between 1
and 4094.
Default
Gateway
Select the default gateway for the VLAN group.
Ports
This field displays the types of ports available to join the VLAN group.
Control
Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN
group.
166
P-660HN-T1h User’s Guide
Chapter 13 802.1Q/1P
Table 56 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
DESCRIPTION
Tx Tag
Select Tx Tagging if you want the port to tag all outgoing traffic
trasmitted through this VLAN. You select this if you want to create VLANs
across different devices and not just the ZyXEL Device.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
13.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID for each port. Click Advanced > 802.1Q/
1P > Port Setting to display the following screen.
Figure 83 Advanced > 802.1Q/1P > Port Setting
P-660HN-T1h User’s Guide
167
Chapter 13 802.1Q/1P
The following table describes the labels in this screen.
Table 57 Advanced > 802.1Q/1P > Port Setting
168
LABEL
DESCRIPTION
Ports
This field displays the types of ports available to join the VLAN group.
802.1Q PVID
Assign a VLAN ID for the port. The valid VID range is between 1 and
4094. The ZyXEL Device assigns the PVID to untagged frames or
priority-tagged frames received on this port.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
CHAPTER
14
Quality of Service (QoS)
14.1 Overview
Use the QoS screen to set up your ZyXEL Device to use QoS for traffic
management.
Quality of Service (QoS) refers to both a network’s ability to deliver data with
minimum delay, and the networking methods used to control bandwidth. QoS
allows the ZyXEL Device to group and prioritize application traffic and fine-tune
network performance.
Without QoS, all traffic data are equally likely to be dropped when the network is
congested. This can cause a reduction in network performance and make the
network inadequate for time-critical applications such as video-on-demand.
The ZyXEL Device assigns each packet a priority and then queues the packet
accordingly. Packets assigned with a high priority are processed more quickly than
those with low priorities if there is congestion, allowing time-sensitive applications
to flow more smoothly. Time-sensitive applications include both those that require
a low level of latency (delay) and a low level of jitter (variations in delay) such as
Voice over IP (VoIP) or Internet gaming, and those for which jitter alone is a
problem such as Internet radio or streaming video.
In the following figure, your Internet connection has an upstream transmission
speed of 50 Mbps. You configure a classifier to assign the highest priority queue
(6) to VoIP traffic from the LAN interface, so that voice traffic would not get
delayed when there is network congestion. Traffic from the boss’s IP address
(192.168.1.23 for example) is mapped to queue 5. Traffic that does not match
P-660HN-T1h User’s Guide
169
Chapter 14 Quality of Service (QoS)
these two classes are assigned priority queue based on the internal QoS mapping
table on the ZyXEL Device.
Figure 84 QoS Example
VoIP: Queue 6
DSL
50 Mbps
Boss: Queue 5
IP=192.168.1.23
14.1.1 What You Can Do in the QoS Screens
• Use the QoS screen (Section 14.2 on page 171) to configure QoS settings on
the ZyXEL Device.
• Use the QoS Settings Summary screen (Section 14.2.1 on page 173) to check
the summary of QoS rules and actions you configured for the ZyXEL Device.
14.1.2 What You Need to Know About QoS
802.1p
QoS is used to prioritize source-to-destination traffic flows. All packets in the same
flow are given the same priority. 802.1p is a way of managing traffic in a network
by grouping similar types of traffic together and treating each type as a class. You
can use 802.1p to give different priorities to different packet types.
Tagging and Marking
In a QoS class, you can configure whether to add or change the DiffServ Code
Point (DSCP) value, IEEE 802.1p priority level and VLAN ID number in a matched
packet. When the packet passes through a compatible network, the networking
device, such as a backbone switch, can provide specific treatment or service
based on the tag or marker.
Finding Out More
See Section 14.3 on page 174 for advanced technical information on QoS.
170
P-660HN-T1h User’s Guide
Chapter 14 Quality of Service (QoS)
14.2 The QoS Screen
Use this screen to enable or disable QoS and have the ZyXEL Device assign
priority levels to traffic according to the port range, IEEE 802.1p priority level and/
or IP precedence.
Click Advanced Setup > QoS to open the screen as shown next.
Figure 85 Advanced Setup > QoS
P-660HN-T1h User’s Guide
171
Chapter 14 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 58 Advanced Setup > QoS
LABEL
DESCRIPTION
Quality of Service
QoS
Use this field to turn on QoS to improve your network performance.
You can give priority to traffic that the ZyXEL Device forwards out
through the WAN interface. Give high priority to voice and video to make
them run more smoothly. Similarly, give low priority to many large file
downloads so that they do not reduce the quality of other applications.
Summary
Click this to open a summary table showing the QoS settings. See
Section 14.2.1 on page 173 for more details.
Rule
Rule Index
Select the rule’s index number from the drop-down list box.
Active
Use this field to enable or disable the rule.
Application
Select an application from the drop-down list box. The Destination Port
Range and Protocol ID fields may change depending on the type of
applications you choose.
Physical Ports
Select Enet1 to apply the rule to the Ethernet port.
Destination
MAC
Type a destination MAC address here. QoS is then applied to traffic
containing this destination MAC address. Leave it blank to apply the rule
to all MAC addresses.
IP
Enter a destination IP address in dotted decimal notation. QoS is then
applied to traffic containing this destination IP address. A blank
destination IP address means any destination IP address.
Mask
Enter a destination subnet mask here.
Port Range
Either use the default value set by the application you choose, or enter
the port number to which the rule should be applied.
Source MAC
Type a source MAC address here. QoS is then applied to traffic containing
this source MAC address. Leave it blank to apply the rule to all MAC
addresses.
IP
Enter a source IP address in dotted decimal notation. QoS is then applied
to traffic containing this source IP address. A blank source IP address
means any source IP address.
Mask
Enter a source subnet mask here.
Port Range
Enter the port number to which the rule should be applied. 0 means any
source port number. See Appendix E on page 305 for some common
services and port numbers.
Protocol ID
Select an IP protocol type from the drop-down list box.
Vlan ID Range
Enter the source VLAN ID in this field.
IPP/DS Field
Select IPP/TOS to specify an IP precedence range and type of services.
Select DSCP to specify a DiffServ Code Point (DSCP) range.
IP Precedence
Range
172
Enter a range from 0 to 7 for IP precedence. Zero is the lowest priority
and seven is the highest.
P-660HN-T1h User’s Guide
Chapter 14 Quality of Service (QoS)
Table 58 Advanced Setup > QoS
LABEL
DESCRIPTION
Type of
Service
Select a type of service from the drop-down list box.
DSCP Range
Specify a DSCP number between 0 and 63 in this field.
802.1p
Select a priority level (0 to 7) from the drop-down list box.
Available options are: Normal service, Minimize delay, Maximize
throughput, Maximize reliability and Minimize monetary cost.
Action
IPP/DS Field
Select IPP/TOS to specify an IP precedence range and type of services.
Select DSCP to specify a DiffServ Code Point (DSCP) range.
IP Precedence
Remarking
Enter a range from 0 to 7 to re-assign IP precedence to matched traffic.
Zero is the lowest priority and seven is the highest.
Type of
Service
Remarking
Select a type of service to re-assign the priority level to matched traffic.
DSCP
Remarking
Specify a DSCP number between 0 and 63 to re-assign the priority level
to matched traffic.
802.1p
Remarking
Select a priority level (0 to 7) to re-assign the priority level to matched
traffic.
Queue #
Specify a Low, Medium, High or Highest queue tag to matched traffic.
Traffic assigned to a higher queue gets through faster while traffic in
lower queues is dropped when there is network congestion.
ADD
Click this to add the rule.
DELETE
Click this to remove the rule.
CANCEL
Click this to restore previously saved settings.
Available options are: Normal service, Minimize delay, Maximize
throughput, Maximize reliability and Minimize monetary cost.
14.2.1 The QoS Settings Summary Screen
Use this screen to display a summary of rules and actions configured for the
ZyXEL Device. In the Advanced > QoS screen, click the QoS Settings
Summary button to open the following screen.
Figure 86 Advanced Setup > QoS > QoS Settings Summary
P-660HN-T1h User’s Guide
173
Chapter 14 Quality of Service (QoS)
The following table describes the labels in this screen.
Table 59 Advanced Setup > QoS > QoS Settings Summary
LABEL
DESCRIPTION
Rules
This is the rule’s index number.
Active
This shows whether the rule is enabled or disabled.
Physical Ports
This is the physical port associated with the rule.
Destination MAC
and IP/Mask
Port Ranges
This is the port range for destination MAC address and IP address.
Source MAC and
IP/Mask Port
Ranges
This is the port range for source MAC address and IP address.
Protocol ID
This is the protocol ID associated with the rule.
VLAN ID
This is the VLAN ID associated with the rule.
IPP/TOS (DSCP)
This shows the IPP/TOS or DSCP settings.
802.1p
This is the 802.1p priority level.
Actions
IPP/TOS (DSCP)
Remarking
The ZyXEL Device re-assigns the priority values specified in this field
to matched traffic.
802.1p
Remarking
The ZyXEL Device re-assigns the priority levels specified in this field
to matched traffic.
Queue #
The ZyXEL Device assigns the queue level specified in this field to
matched traffic.
14.3 QoS Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
14.3.1 IEEE 802.1p
IEEE 802.1p specifies the user priority field and defines up to eight separate traffic
types. The following table describes the traffic types defined in the IEEE 802.1d
standard (which incorporates the 802.1p).
Table 60 IEEE 802.1p Priority Level and Traffic Type
PRIORITY
LEVEL
174
TRAFFIC TYPE
Level 7
Typically used for network control traffic such as router configuration
messages.
Level 6
Typically used for voice traffic that is especially sensitive to jitter (jitter is the
variations in delay).
P-660HN-T1h User’s Guide
Chapter 14 Quality of Service (QoS)
Table 60 IEEE 802.1p Priority Level and Traffic Type
PRIORITY
LEVEL
TRAFFIC TYPE
Level 5
Typically used for video that consumes high bandwidth and is sensitive to
jitter.
Level 4
Typically used for controlled load, latency-sensitive traffic such as SNA
(Systems Network Architecture) transactions.
Level 3
Typically used for “excellent effort” or better than best effort and would
include important business traffic that can tolerate some delay.
Level 2
This is for “spare bandwidth”.
Level 1
This is typically used for non-critical “background” traffic such as bulk
transfers that are allowed but that should not affect other applications and
users.
Level 0
Typically used for best-effort traffic.
14.3.2 IP Precedence
Similar to IEEE 802.1p prioritization at layer-2, you can use IP precedence to
prioritize packets in a layer-3 network. IP precedence uses three bits of the eightbit ToS (Type of Service) field in the IP header. There are eight classes of services
(ranging from zero to seven) in IP precedence. Zero is the lowest priority level and
seven is the highest.
14.3.3 Automatic Priority Queue Assignment
If you enable QoS on the ZyXEL Device, the ZyXEL Device can automatically base
on the IEEE 802.1p priority level, IP precedence and/or packet length to assign
priority to traffic which does not match a class.
The following table shows you the internal layer-2 and layer-3 QoS mapping on
the ZyXEL Device. On the ZyXEL Device, traffic assigned to higher priority queues
gets through faster while traffic in lower index queues is dropped if the network is
congested.
Table 61 Internal Layer2 and Layer3 QoS Mapping
LAYER 2
LAYER 3
PRIORITY
QUEUE
IEEE 802.1P
USER PRIORITY
(ETHERNET
PRIORITY)
TOS (IP
PRECEDENCE) DSCP
000000
000000
P-660HN-T1h User’s Guide
IP PACKET
LENGTH (BYTE)
>1100
175
Chapter 14 Quality of Service (QoS)
Table 61 Internal Layer2 and Layer3 QoS Mapping
LAYER 2
LAYER 3
PRIORITY
QUEUE
IEEE 802.1P
USER PRIORITY
(ETHERNET
PRIORITY)
TOS (IP
PRECEDENCE) DSCP
IP PACKET
LENGTH (BYTE)
250~1100
001110
001100
001010
001000
010110
010100
010010
010000
011110
<250
011100
011010
011000
100110
100100
100010
100000
101110
101000
176
110000
111000
P-660HN-T1h User’s Guide
CHAPTER
15
Dynamic DNS Setup
15.1 Overview
Dynamic DNS allows you to update your current dynamic IP address with one or
many dynamic DNS services so that anyone can contact you (in NetMeeting, CUSeeMe, etc.). You can also access your FTP server or Web site on your own
computer using a domain name (for instance myhost.dhs.org, where myhost is a
name of your choice) that will never change instead of using an IP address that
changes each time you reconnect. Your friends or relatives will always be able to
call you even if they don't know your IP address.
First of all, you need to have registered a dynamic DNS account with
www.dyndns.org. This is for people with a dynamic IP from their ISP or DHCP
server that would still like to have a domain name. The Dynamic DNS service
provider will give you a password or key.
15.1.1 What You Can Do in the DDNS Screen
Use the Dynamic DNS screen (Section 15.2 on page 178) to enable DDNS and
configure the DDNS settings on the ZyXEL Device.
15.1.2 What You Need To Know About DDNS
DYNDNS Wildcard
Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be
aliased to the same IP address as yourhost.dyndns.org. This feature is useful if
you want to be able to use, for example, www.yourhost.dyndns.org and still reach
your hostname.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
P-660HN-T1h User’s Guide
177
Chapter 15 Dynamic DNS Setup
15.2 The Dynamic DNS Screen
Use this screen to change your ZyXEL Device’s DDNS. Click Advanced >
Dynamic DNS. The screen appears as shown.
Figure 87 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 62 Advanced > Dynamic DNS
LABEL
DESCRIPTION
Dynamic DNS Setup
Active
Dynamic DNS
Select this check box to use dynamic DNS.
Service
Provider
This is the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Host Name
Type the domain name assigned to your ZyXEL Device by your Dynamic
DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
178
User Name
Type your user name.
Password
Type the password assigned to you.
Enable
Wildcard
Option
Select the check box to enable DynDNS Wildcard.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
CHAPTER
16
Remote Management
16.1 Overview
Remote management allows you to determine which services/protocols can access
which ZyXEL Device interface (if any) from which computers.
The following figure shows remote management of the ZyXEL Device coming in
from the WAN.
Figure 88 Remote Management From the WAN
LAN
WAN
HTTP
Telnet
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
• LAN only
• LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding
Service Access field.
You may only have one remote management session running at a time. The ZyXEL
Device automatically disconnects a remote management session of lower priority
P-660HN-T1h User’s Guide
179
Chapter 16 Remote Management
when another remote management session of higher priority starts. The priorities
for the different types of remote management sessions are as follows.
Telnet
HTTP
16.1.1 What You Can Do in the Remote Management Screens
• Use the WWW screen (Section 16.2 on page 181) to configure through which
interface(s) and from which IP address(es) users can use HTTP to manage the
ZyXEL Device.
• Use the Telnet screen (Section 16.3 on page 182) to configure through which
interface(s) and from which IP address(es) users can use Telnet to manage the
ZyXEL Device.
• Use the FTP screen (Section 16.4 on page 183) to configure through which
interface(s) and from which IP address(es) users can use FTP to access the
ZyXEL Device.
• Your ZyXEL Device can act as an SNMP agent, which allows a manager station to
manage and monitor the ZyXEL Device through the network. Use the SNMP
screen (see Section 16.5 on page 184) to configure through which interface(s)
and from which IP address(es) users can use SNMP to access the ZyXEL Device.
• Use the DNS screen (Section 16.6 on page 186) to configure through which
interface(s) and from which IP address(es) users can send DNS queries to the
ZyXEL Device.
• Use the ICMP screen (Section 16.7 on page 187) to set whether or not your
ZyXEL Device will respond to pings and probes for services that you have not
made available.
16.1.2 What You Need to Know About Remote Management
Remote Management Limitations
Remote management does not work when:
• You have not enabled that service on the interface in the corresponding remote
management screen.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP Address field does not match the
client IP address. If it does not match, the ZyXEL Device will disconnect the
session immediately.
• There is already another remote management session with an equal or higher
priority running. You may only have one remote management session running
at one time.
• There is a firewall rule that blocks it.
180
P-660HN-T1h User’s Guide
Chapter 16 Remote Management
Remote Management and NAT
When NAT is enabled:
• Use the ZyXEL Device’s WAN IP address when configuring from the WAN.
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.
System Timeout
There is a default system management idle timeout of five minutes (three
hundred seconds). The ZyXEL Device automatically logs you out if the
management session remains idle for longer than this timeout period. The
management session does not time out when a statistics screen is polling.
16.2 The WWW Screen
Use this screen to specify how to connect to the ZyXEL Device from a web
browser, such as Internet Explorer.
Note: If you disable the WWW service in the Remote MGMT > WWW screen, then
the ZyXEL Device blocks all HTTP connection attempts.
16.2.1 Configuring the WWW Screen
Click Advanced > Remote MGMT to display the WWW screen.
Figure 89 Advanced > Remote MGMT > WWW
P-660HN-T1h User’s Guide
181
Chapter 16 Remote Management
The following table describes the labels in this screen.
Table 63 Advanced > Remote Management > WWW
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the ZyXEL Device using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
16.3 The Telnet Screen
You can use Telnet to access the ZyXEL Device’s command line interface. Specify
which interfaces allow Telnet access and from which IP address the access can
come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 90 Advanced > Remote MGMT > Telnet
182
P-660HN-T1h User’s Guide
Chapter 16 Remote Management
The following table describes the labels in this screen.
Table 64 Advanced > Remote Management > Telnet
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server Access
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the ZyXEL Device using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
16.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the ZyXEL
Device’s firmware and configuration files. Please see the User’s Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
Use this screen to specify which interfaces allow FTP access and from which IP
address the access can come. To change your ZyXEL Device’s FTP settings, click
Advanced > Remote MGMT > FTP. The screen appears as shown.
Figure 91 Advanced > Remote MGMT > FTP
P-660HN-T1h User’s Guide
183
Chapter 16 Remote Management
The following table describes the labels in this screen.
Table 65 Advanced > Remote MGMT > FTP
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the ZyXEL Device using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
16.5 The SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging
management information between network devices. Your ZyXEL Device supports
SNMP agent functionality, which allows a manager station to manage and monitor
the ZyXEL Device through the network. The ZyXEL Device supports SNMP version
one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP
management operation.
Figure 92 SNMP Management Model
184
P-660HN-T1h User’s Guide
Chapter 16 Remote Management
An SNMP managed network consists of two main types of component: agents and
a manager.
An agent is a management software module that resides in a managed device (the
ZyXEL Device). An agent translates the local management information from the
managed device into a form compatible with SNMP. The manager is the console
through which network administrators perform network management functions. It
executes applications that control and monitor managed devices.
The managed devices contain object variables/managed objects that define each
piece of information to be collected about a device. Examples of variables include
such as number of packets received, node port status etc. A Management
Information Base (MIB) is a collection of managed objects. SNMP allows a
manager and agents to communicate for the purpose of accessing these objects.
16.5.1 Configuring SNMP
To change your ZyXEL Device’s SNMP settings, click Advanced > Remote MGMT
> SNMP tab. The screen appears as shown.
Figure 93 Advanced > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 66 Advanced > Remote MGMT > SNMP
LABEL
DESCRIPTION
Server Port
The SNMP agent listens on port 161 by default. If you change the SNMP
server port to a different number on the ZyXEL Device, for example
8161, then you must notify people who need to access the ZyXEL Device
SNMP agent to use the same port.
Server Access
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to access the
SNMP agent on the ZyXEL Device.
Select All to allow any computer to access the SNMP agent.
Choose Selected to just allow the computer with the IP address that you
specify to access the SNMP agent.
P-660HN-T1h User’s Guide
185
Chapter 16 Remote Management
Table 66 Advanced > Remote MGMT > SNMP (continued)
LABEL
DESCRIPTION
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
16.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP
address and vice versa. Refer to Chapter 7 on page 87 for background
information.
Use this screen to set from which IP address the ZyXEL Device will accept DNS
queries and on which interface it can send them your ZyXEL Device’s DNS
settings. This feature is not available when the ZyXEL Device is set to bridge
mode. Click Advanced > Remote MGMT > DNS to change your ZyXEL Device’s
DNS settings.
Figure 94 Advanced > Remote Management > DNS
The following table describes the labels in this screen.
Table 67 Advanced > Remote Management > DNS
LABEL
DESCRIPTION
Server Port
The DNS service port number is 53 and cannot be changed here.
Server Access
Select the interface(s) through which a computer may send DNS queries
to the ZyXEL Device.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to send DNS
queries to the ZyXEL Device.
Select All to allow any computer to send DNS queries to the ZyXEL
Device.
Choose Selected to just allow the computer with the IP address that
you specify to send DNS queries to the ZyXEL Device.
186
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
Chapter 16 Remote Management
16.7 The ICMP Screen
To change your ZyXEL Device’s security settings, click Advanced > Remote
MGMT > ICMP. The screen appears as shown.
If an outside user attempts to probe an unsupported port on your ZyXEL Device,
an ICMP response packet is automatically returned. This allows the outside user to
know the ZyXEL Device exists. Your ZyXEL Device supports anti-probing, which
prevents the ICMP response packet from being sent. This keeps outsiders from
discovering your ZyXEL Device when unsupported ports are probed.
Note: If you want your device to respond to pings and requests for unauthorized
services, you may also need to configure the firewall anti probing settings to
match.
Figure 95 Advanced > Remote Management > ICMP
The following table describes the labels in this screen.
Table 68 Advanced > Remote Management > ICMP
LABEL
DESCRIPTION
ICMP
Internet Control Message Protocol is a message control and errorreporting protocol between a host server and a gateway to the Internet.
ICMP uses Internet Protocol (IP) datagrams, but the messages are
processed by the TCP/IP software and directly apparent to the
application user.
Respond to
Ping on
The ZyXEL Device will not respond to any incoming Ping requests when
Disable is selected. Select LAN to reply to incoming LAN Ping requests.
Select WAN to reply to incoming WAN Ping requests. Otherwise select
LAN & WAN to reply to both incoming LAN and WAN Ping requests.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
187
Chapter 16 Remote Management
188
P-660HN-T1h User’s Guide
CHAPTER
17
Universal Plug-and-Play (UPnP)
17.1 Overview
Universal Plug and Play (UPnP) is a distributed, open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between devices. A
UPnP device can dynamically join a network, obtain an IP address, convey its
capabilities and learn about other devices on the network. In turn, a device can
leave a network smoothly and automatically when it is no longer in use.
17.1.1 What You Can Do in the UPnP Screen
Use the UPnP screen (Section 17.2 on page 191) to enable UPnP on the ZyXEL
Device and allow UPnP-enabled applications to automatically configure the ZyXEL
Device.
17.1.2 What You Need to Know About UPnP
Identifying UPnP Devices
UPnP hardware is identified as an icon in the Network Connections folder
(Windows XP). Each UPnP compatible device installed on your network will appear
as a separate icon. Selecting the icon of a UPnP device will allow you to access the
information and properties of that device.
NAT Traversal
UPnP NAT traversal automates the process of allowing an application to operate
through NAT. UPnP network devices can automatically configure network
addressing, announce their presence in the network to other UPnP devices and
enable exchange of simple product and service descriptions. NAT traversal allows
the following:
• Dynamic port mapping
• Learning public IP addresses
• Assigning lease times to mappings
P-660HN-T1h User’s Guide
189
Chapter 17 Universal Plug-and-Play (UPnP)
Windows Messenger is an example of an application that supports NAT traversal
and UPnP.
See the NAT chapter for more information on NAT.
Cautions with UPnP
The automated nature of NAT traversal applications in establishing their own
services and opening firewall ports may present network security issues. Network
information and configuration may also be obtained and modified by users in some
network environments.
When a UPnP device joins a network, it announces its presence with a multicast
message. For security reasons, the ZyXEL Device allows multicast messages on
the LAN only.
All UPnP-enabled devices may communicate freely with each other without
additional configuration. Disable UPnP if this is not your intention.
UPnP and ZyXEL
ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum
UPnP™ Implementers Corp. (UIC). ZyXEL's UPnP implementation supports
Internet Gateway Device (IGD) 1.0.
See the following sections for examples of installing and using UPnP.
190
P-660HN-T1h User’s Guide
Chapter 17 Universal Plug-and-Play (UPnP)
17.2 The UPnP Screen
Use the following screen to configure the UPnP settings on your ZyXEL Device.
Click Advanced > UPnP to display the screen shown next.
See Section 17.1 on page 189 for more information.
Figure 96 Advanced > UPnP > General
The following table describes the fields in this screen.
Table 69 Advanced > UPnP > General
LABEL
DESCRIPTION
Active the Universal Plug
and Play (UPnP) Feature
Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the ZyXEL Device's IP address
(although you must still enter the password to access the web
configurator).
Allow users to make
configuration changes
through UPnP
Select this check box to allow UPnP-enabled applications to
automatically configure the ZyXEL Device so that they can
communicate through the ZyXEL Device, for example by using
NAT traversal, UPnP applications automatically reserve a NAT
forwarding port in order to communicate with another UPnP
enabled device; this eliminates the need to manually configure
port forwarding for the UPnP enabled application.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
191
Chapter 17 Universal Plug-and-Play (UPnP)
17.3 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
Click on the Windows Setup tab and select Communication in the
Components selection box. Click Details.
Add/Remove Programs: Windows Setup: Communication
192
P-660HN-T1h User’s Guide
Chapter 17 Universal Plug-and-Play (UPnP)
In the Communications window, select the Universal Plug and Play check box
in the Components selection box.
Add/Remove Programs: Windows Setup: Communication: Components
Click OK to go back to the Add/Remove Programs Properties window and click
Next.
Restart the computer when prompted.
Installing UPnP in Windows XP
Follow the steps below to install the UPnP in Windows XP.
Click Start and Control Panel.
Double-click Network Connections.
P-660HN-T1h User’s Guide
193
Chapter 17 Universal Plug-and-Play (UPnP)
In the Network Connections window, click Advanced in the main menu and
select Optional Networking Components ….
Network Connections
The Windows Optional Networking Components Wizard window displays.
Select Networking Service in the Components selection box and click Details.
Windows Optional Networking Components Wizard
194
P-660HN-T1h User’s Guide
Chapter 17 Universal Plug-and-Play (UPnP)
In the Networking Services window, select the Universal Plug and Play check
box.
Networking Services
Click OK to go back to the Windows Optional Networking Component Wizard
window and click Next.
17.4 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must
already have UPnP installed in Windows XP and UPnP activated on the ZyXEL
Device.
Make sure the computer is connected to a LAN port of the ZyXEL Device. Turn on
your computer and the ZyXEL Device.
Auto-discover Your UPnP-enabled Network Device
Click Start and Control Panel. Double-click Network Connections. An icon
displays under Internet Gateway.
P-660HN-T1h User’s Guide
195
Chapter 17 Universal Plug-and-Play (UPnP)
Right-click the icon and select Properties.
Network Connections
In the Internet Connection Properties window, click Settings to see the port
mappings there were automatically created.
Internet Connection Properties
196
P-660HN-T1h User’s Guide
Chapter 17 Universal Plug-and-Play (UPnP)
You may edit or delete the port mappings or click Add to manually add port
mappings.
Internet Connection Properties: Advanced Settings
Internet Connection Properties: Advanced Settings: Add
When the UPnP-enabled device is disconnected from your computer, all port
mappings will be deleted automatically.
P-660HN-T1h User’s Guide
197
Chapter 17 Universal Plug-and-Play (UPnP)
Select Show icon in notification area when connected option and click OK.
An icon displays in the system tray.
System Tray Icon
Double-click on the icon to display your current Internet connection status.
Internet Connection Status
Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the ZyXEL Device
without finding out the IP address of the ZyXEL Device first. This comes helpful if
you do not know the IP address of the ZyXEL Device.
Follow the steps below to access the web configurator.
198
Click Start and then Control Panel.
Double-click Network Connections.
P-660HN-T1h User’s Guide
Chapter 17 Universal Plug-and-Play (UPnP)
Select My Network Places under Other Places.
Network Connections
An icon with the description for each UPnP-enabled device displays under Local
Network.
P-660HN-T1h User’s Guide
199
Chapter 17 Universal Plug-and-Play (UPnP)
Right-click on the icon for your ZyXEL Device and select Invoke. The web
configurator login screen displays.
Network Connections: My Network Places
Right-click on the icon for your ZyXEL Device and select Properties. A properties
window displays with basic information about the ZyXEL Device.
Network Connections: My Network Places: Properties: Example
200
P-660HN-T1h User’s Guide
CHAPTER
18
CWMP
18.1 Overview
The ZyXEL Device supports TR-069 Amendment 1 (CPE WAN Management
Protocol Release 2.0) and TR-069 Amendment 2 (CPE WAN Management Protocol
v1.1, Release 3.0).
TR-069 is a protocol that defines how your ZyXEL Device (ZD) can be managed
via a management server (MS) such as ZyXEL’s Vantage Access.
Figure 97 LAN and WAN
ZD
MS
An administrator can use a management server to remotely set up the ZyXEL
device, modify settings, perform firmware upgrades as well as monitor and
diagnose the ZyXEL device.
In order to use CWMP, you need to configure the following steps:
Activate CWMP
Specify the URL, username and password.
Activate periodic inform and specify an interval value.
P-660HN-T1h User’s Guide
201
Chapter 18 CWMP
18.2 The CWMP Setup Screen
Use this screen to configure your ZyXEL Device to be managed by a management
server. Click Advanced> CWMP to display the following screen.
Figure 98 Advanced > CWMP
The following table describes the fields in this screen.
Table 70 Advanced > CWMP
LINK
DESCRIPTION
CWMP Setup
202
CWMP
Select Activated to allow the ZyXEL Device to be managed by a
management server or select Deactivated to not allow the ZyXEL Device
to be managed by a management server.
Login ACS
Configure this part of the screen to log into the management server.
URL
Type the IP address or domain name of the management server. If the
ZyXEL Device is behind a NAT router that assigns it a private IP address,
you will have to configure a NAT port forwarding rule on the NAT router.
User Name
The user name is used to authenticate the ZyXEL Device when making a
connection to the management server. This user name on the management
server and the ZyXEL Device must be the same. Type a user name of up to
255 printable characters found on an English-language keyboard. Spaces
and characters such as @#$%^&*()_+ are allowed.
P-660HN-T1h User’s Guide
Chapter 18 CWMP
Table 70 Advanced > CWMP (continued)
LINK
DESCRIPTION
Password
The password is used to authenticate the ZyXEL Device when making a
connection to the management server. This password on the management
server and the ZyXEL Device must be the same. Type a password of up to
255 printable characters found on an English-language keyboard.
Connection
Request
Use this part of the screen to allow the management server to connect to
the ZyXEL Device after a successful login.
Path
Type the IP address or domain name of the ZyXEL Device. The
management server uses this path to verify the ZyXEL Device.
Port
The default port for access to the ZyXEL Device from the management
server is the HTTP port, port 80. If you change it, make sure it does not
conflict with another port on your network and it is recommended to use a
port number above 1024 (not a commonly used port). The management
server should use this port to connect to the ZyXEL Device. You may need
to alter your NAT port forwarding rules if they were already configured.
UserName
The user name is used to authenticate the management server when
connecting to the ZyXEL Device. Type a user name of up to 255 printable
characters found on an English-language keyboard. Spaces and characters
such as @#$%^&*()_+ are allowed.
Password
The password is used to authenticate the management server when
connecting to the ZyXEL Device. Type a password of up to 255 printable
characters found on an English-language keyboard. Spaces are not
allowed.
Periodic
Inform
Select Activated to have the ZyXEL Device periodically send information to
the management server (recommended if CWMP is enabled) or select
Deactivated to not have the ZyXEL Device periodically send information to
the management server
Interval
The interval is the duration in seconds for which the ZyXEL Device must
attempt to connect with the management server to send information and
check for configuration updates. Enter a value between 1 and 86400
seconds.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
203
Chapter 18 CWMP
204
P-660HN-T1h User’s Guide
CHAPTER
19
System Settings
19.1 Overview
This chapter shows you how to configure system related settings, such as system
time, password, name, the domain name and the inactivity timeout interval.
19.1.1 What You Can Do in the System Settings Screens
• Use the General screen (Section 19.2 on page 205) to configure system
settings.
• Use the Time and Date screen (Section 19.3 on page 206) to set the system
time.
19.2 The General Screen
Use this screen to configure system admin password.
Click Maintenance > System to open the General screen.
Figure 99 Maintenance > System > General
P-660HN-T1h User’s Guide
205
Chapter 19 System Settings
The following table describes the labels in this screen.
Table 71 Maintenance > System > General
LABEL
DESCRIPTION
Password
Admin
Password
Old
Password
Type the default password or the existing password you use to access the
system in this field.
New
Password
Type your new system password (up to 30 characters). Note that as you
type a password, the screen displays a (*) for each character you type.
After you change the password, use the new password to access the
ZyXEL Device.
Retype to
confirm
Type the new password again for confirmation.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
19.3 The Time and Date Screen
Use this screen to configure the ZyXEL Device’s time based on your local time
zone. To change your ZyXEL Device’s time and date, click Maintenance >
System > Time and Date. The screen appears as shown.
Figure 100 Maintenance > System > Time and Date
206
P-660HN-T1h User’s Guide
Chapter 19 System Settings
The following table describes the fields in this screen.
Table 72 Maintenance > System > Time and Date
LABEL
DESCRIPTION
Current Time and Date
Current Time
This field displays the time of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the
time with the time server.
Current Date
This field displays the date of your ZyXEL Device.
Each time you reload this page, the ZyXEL Device synchronizes the
date with the time server.
Time and Date Setup
Manual
Select this radio button to enter the time and date manually. If you
configure a new time and date, Time Zone and Daylight Saving at the
same time, the new time and date you entered has priority and the
Time Zone and Daylight Saving settings do not affect it.
New Time
This field displays the last updated time from the time server or the last
time configured manually.
(hh:mm:ss)
When you set Time and Date Setup to Manual, enter the new time in
this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last
date configured manually.
When you set Time and Date Setup to Manual, enter the new date in
this field and then click Apply.
Get from Time
Server
Select this radio button to have the ZyXEL Device get the time and date
from the time server you specified below.
Time Server
Address
Enter the IP address or URL (up to 20 extended ASCII characters in
length) of your time server. Check with your ISP/network administrator
if you are unsure of this information.
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Daylight
Savings
Daylight saving is a period from late spring to early fall when many
countries set their clocks ahead of normal local time by one hour to
give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
P-660HN-T1h User’s Guide
207
Chapter 19 System Settings
Table 72 Maintenance > System > Time and Date (continued)
LABEL
DESCRIPTION
Start Date
Configure the day and time when Daylight Saving Time starts if you
selected Enable Daylight Saving. The o'clock field uses the 24 hour
format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the
second Sunday of March. Each time zone in the United States starts
using Daylight Saving Time at 2 A.M. local time. So in the United States
you would select Second, Sunday, March and type 2 in the o'clock
field.
Daylight Saving Time starts in the European Union on the last Sunday
of March. All of the time zones in the European Union start using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in
the European Union you would select Last, Sunday, March. The time
you type in the o'clock field depends on your time zone. In Germany
for instance, you would type 2 because Germany's time zone is one
hour ahead of GMT or UTC (GMT+1).
End Date
Configure the day and time when Daylight Saving Time ends if you
selected Enable Daylight Saving. The o'clock field uses the 24 hour
format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of
November. Each time zone in the United States stops using Daylight
Saving Time at 2 A.M. local time. So in the United States you would
select First, Sunday, November and type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in
the European Union you would select Last, Sunday, October. The
time you type in the o'clock field depends on your time zone. In
Germany for instance, you would type 2 because Germany's time zone
is one hour ahead of GMT or UTC (GMT+1).
208
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
P-660HN-T1h User’s Guide
CHAPTER
20
Logs
20.1 Overview
This chapter contains information about viewing the ZyXEL Device’s logs.
The web configurator allows you to choose which types of events and/or alerts to
have the ZyXEL Device log and then display the logs.
20.1.1 What You Need To Know About Logs
Alerts
An alert is a message that is enabled as soon as the event occurs. They include
system errors, attacks (access control) and attempted access to blocked web
sites. Some categories such as System Errors consist of both logs and alerts. You
may differentiate them by their color in the View Log screen. Alerts display in red
and logs display in black.
Logs
A log is a message about an event that occurred on your ZyXEL Device. For
example, when someone logs in to the ZyXEL Device, you can set a schedule for
how often logs should be enabled, or sent to a syslog server.
20.2 The System Log Screen
Use the System Log screen to configure and view the logs you wish to display.
To change your ZyXEL Device’s log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
P-660HN-T1h User’s Guide
209
Chapter 20 Logs
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the
log is full. Selecting many alert and/or log categories (especially Access Control)
may result in many e-mails being sent.
Figure 101 Maintenance > System Logs
The following table describes the fields in this screen.
Table 73 Maintenance > Logs > Log Settings
LABEL
DESCRIPTION
System Log
210
Log Type
Select the types of logs that you want to display and record. Then click
Submit to display the details.
Clear Log
Click this to delete all the logs.
Save Log
Click this to save the logs in a text file.
P-660HN-T1h User’s Guide
Chapter 20 Logs
20.3 Log Descriptions
This section provides descriptions of example log messages.
Table 74 System Maintenance Logs
LOG MESSAGE
DESCRIPTION
Time calibration is
successful
The router has adjusted its time based on information
from the time server.
Time calibration failed
The router failed to get information from the time
server.
WAN interface gets IP: %s
A WAN interface got a new IP address from the DHCP,
PPPoE, or dial-up server.
DHCP client IP expired
A DHCP client's IP address has expired.
DHCP server assigns %s
The DHCP server assigned an IP address to a client.
Successful WEB login
Someone has logged on to the router's web
configurator interface.
WEB login failed
Someone has failed to log on to the router's web
configurator interface.
Successful TELNET login
Someone has logged on to the router via telnet.
TELNET login failed
Someone has failed to log on to the router via telnet.
Successful FTP login
Someone has logged on to the router via ftp.
FTP login failed
Someone has failed to log on to the router via ftp.
NAT Session Table is Full!
The maximum number of NAT session table entries
has been exceeded and the table is full.
Starting Connectivity
Monitor
Starting Connectivity Monitor.
Time initialized by Daytime
Server
The router got the time and date from the Daytime
server.
Time initialized by Time
server
The router got the time and date from the time
server.
Time initialized by NTP
server
The router got the time and date from the NTP server.
Connect to Daytime server
fail
The router was not able to connect to the Daytime
server.
Connect to Time server fail
The router was not able to connect to the Time server.
Connect to NTP server fail
The router was not able to connect to the NTP server.
Too large ICMP packet has
been dropped
The router dropped an ICMP packet that was too
large.
Configuration Change: PC =
0x%x, Task ID = 0x%x
The router is saving configuration changes.
Successful SSH login
Someone has logged on to the router’s SSH server.
SSH login failed
Someone has failed to log on to the router’s SSH
server.
P-660HN-T1h User’s Guide
211
Chapter 20 Logs
Table 74 System Maintenance Logs (continued)
LOG MESSAGE
DESCRIPTION
Successful HTTPS login
Someone has logged on to the router's web
configurator interface using HTTPS protocol.
HTTPS login failed
Someone has failed to log on to the router's web
configurator interface using HTTPS protocol.
Table 75 System Error Logs
LOG MESSAGE
DESCRIPTION
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the
maximum number of NAT session table entries allowed to
be created per host.
setNetBIOSFilter: calloc
error
The router failed to allocate memory for the NetBIOS
filter settings.
readNetBIOSFilter: calloc
error
The router failed to allocate memory for the NetBIOS
filter settings.
WAN connection is down.
A WAN connection is down. You cannot access the
network through this interface.
Table 76 Access Control Logs
212
LOG MESSAGE
DESCRIPTION
Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF ]

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or
forwarded according to the default policy’s
setting.
Firewall rule [NOT] match:[ TCP
| UDP | IGMP | ESP | GRE | OSPF
] , 
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall
rule (denoted by its number) and was blocked or
forwarded according to the rule.
Triangle route packet forwarded:
[ TCP | UDP | IGMP | ESP | GRE |
OSPF ]
The firewall allowed a triangle route session to
pass through.
Packet without a NAT table entry
blocked: [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
The router blocked a packet that didn't have a
corresponding NAT table entry.
Router sent blocked web site
message: TCP
The router sent a message to notify a user that
the router blocked access to a web site that the
user requested.
P-660HN-T1h User’s Guide
Chapter 20 Logs
Table 77 TCP Reset Logs
LOG MESSAGE
DESCRIPTION
Under SYN flood attack,
sent TCP RST
The router sent a TCP reset packet when a host was
under a SYN flood attack (the TCP incomplete count is per
destination host.)
Exceed TCP MAX
incomplete, sent TCP RST
The router sent a TCP reset packet when the number of
TCP incomplete connections exceeded the user configured
threshold. (the TCP incomplete count is per destination
host.) Note: Refer to TCP Maximum Incomplete in the
Firewall Attack Alerts screen.
Peer TCP state out of
order, sent TCP RST
The router sent a TCP reset packet when a TCP
connection state was out of order.Note: The firewall refers
to RFC793 Figure 6 to check the TCP state.
Firewall session time
out, sent TCP RST
The router sent a TCP reset packet when a dynamic
firewall session timed out.Default timeout values:ICMP
idle timeout (s): 60UDP idle timeout (s): 60TCP
connection (three way handshaking) timeout (s): 30TCP
FIN-wait timeout (s): 60TCP idle (established) timeout
(s): 3600
Exceed MAX incomplete,
sent TCP RST
The router sent a TCP reset packet when the number of
incomplete connections (TCP and UDP) exceeded the
user-configured threshold. (Incomplete count is for all
TCP and UDP connections through the firewall.)Note:
When the number of incomplete connections (TCP + UDP)
> “Maximum Incomplete High”, the router sends TCP RST
packets for TCP connections and destroys TOS (firewall
dynamic sessions) until incomplete connections <
“Maximum Incomplete Low”.
Access block, sent TCP
RST
The router sends a TCP RST packet and generates this log
if you turn on the firewall TCP reset mechanism (via CI
command: "sys firewall tcprst").
Table 78 Packet Filter Logs
LOG MESSAGE
DESCRIPTION
[ TCP | UDP | ICMP | IGMP |
Generic ] packet filter
matched (set: %d, rule: %d)
Attempted access matched a configured filter rule
(denoted by its set and rule number) and was blocked
or forwarded according to the rule.
P-660HN-T1h User’s Guide
213
Chapter 20 Logs
For type and code details, see Table 87 on page 217.
Table 79 ICMP Logs
LOG MESSAGE
DESCRIPTION
Firewall default policy: ICMP
, ,

ICMP access matched the default policy and was
blocked or forwarded according to the user's
setting.
Firewall rule [NOT] match: ICMP
, ,
, 
ICMP access matched (or didn’t match) a firewall
rule (denoted by its number) and was blocked or
forwarded according to the rule.
Triangle route packet forwarded:
ICMP
The firewall allowed a triangle route session to
pass through.
Packet without a NAT table entry
blocked: ICMP
The router blocked a packet that didn’t have a
corresponding NAT table entry.
Unsupported/out-of-order ICMP:
ICMP
The firewall does not support this kind of ICMP
packets or the ICMP packets are out of order.
Router reply ICMP packet: ICMP
The router sent an ICMP reply packet to the
sender.
Table 80 CDR Logs
LOG MESSAGE
DESCRIPTION
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
The router received the setup requirements for a call.
“call” is the reference (count) number of the call.
“dev” is the device type (3 is for dial-up, 6 is for
PPPoE, 10 is for PPTP) "channel" or “ch” is the call
channel ID. For example,"board 0 line 0 channel 0,
call 3, C01 Outgoing Call dev=6 ch=0 "Means the
router has dialed to the PPPoE server 3 times.
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
The PPPoE, PPTP or dial-up call is connected.
board %d line %d channel %d,
call %d, %s C02 Call
Terminated
The PPPoE, PPTP or dial-up call was disconnected.
Table 81 PPP Logs
214
LOG MESSAGE
DESCRIPTION
ppp:LCP Starting
The PPP connection’s Link Control Protocol stage has started.
ppp:LCP Opening
The PPP connection’s Link Control Protocol stage is opening.
ppp:CHAP Opening
The PPP connection’s Challenge Handshake Authentication Protocol
stage is opening.
ppp:IPCP
Starting
The PPP connection’s Internet Protocol Control Protocol stage is
starting.
ppp:IPCP Opening
The PPP connection’s Internet Protocol Control Protocol stage is
opening.
P-660HN-T1h User’s Guide
Chapter 20 Logs
Table 81 PPP Logs (continued)
LOG MESSAGE
DESCRIPTION
ppp:LCP Closing
The PPP connection’s Link Control Protocol stage is closing.
ppp:IPCP Closing
The PPP connection’s Internet Protocol Control Protocol stage is
closing.
Table 82 UPnP Logs
LOG MESSAGE
DESCRIPTION
UPnP pass through Firewall
UPnP packets can pass through the firewall.
Table 83 Content Filtering Logs
LOG MESSAGE
DESCRIPTION
%s: block keyword
The content of a requested web page matched a user defined
keyword.
%s
The system forwarded web content.
For type and code details, see Table 87 on page 217.
Table 84 Attack Logs
LOG MESSAGE
DESCRIPTION
attack [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF
attack.
attack ICMP (type:%d,
code:%d)
The firewall detected an ICMP attack.
land [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF
land attack.
land ICMP (type:%d,
code:%d)
The firewall detected an ICMP land attack.
ip spoofing - WAN [ TCP |
UDP | IGMP | ESP | GRE |
OSPF ]
The firewall detected an IP spoofing attack on the WAN
port.
ip spoofing - WAN ICMP
(type:%d, code:%d)
The firewall detected an ICMP IP spoofing attack on the
WAN port.
icmp echo : ICMP
(type:%d, code:%d)
The firewall detected an ICMP echo attack.
syn flood TCP
The firewall detected a TCP syn flood attack.
ports scan TCP
The firewall detected a TCP port scan attack.
teardrop TCP
The firewall detected a TCP teardrop attack.
teardrop UDP
The firewall detected an UDP teardrop attack.
teardrop ICMP (type:%d,
code:%d)
The firewall detected an ICMP teardrop attack.
illegal command TCP
The firewall detected a TCP illegal command attack.
P-660HN-T1h User’s Guide
215
Chapter 20 Logs
Table 84 Attack Logs (continued)
LOG MESSAGE
DESCRIPTION
NetBIOS TCP
The firewall detected a TCP NetBIOS attack.
ip spoofing - no routing
entry [ TCP | UDP | IGMP
| ESP | GRE | OSPF ]
The firewall classified a packet with no source routing
entry as an IP spoofing attack.
ip spoofing - no routing
entry ICMP (type:%d,
code:%d)
The firewall classified an ICMP packet with no source
routing entry as an IP spoofing attack.
vulnerability ICMP
(type:%d, code:%d)
The firewall detected an ICMP vulnerability attack.
traceroute ICMP (type:%d,
code:%d)
The firewall detected an ICMP traceroute attack.
Table 85 802.1X Logs
LOG MESSAGE
DESCRIPTION
RADIUS accepts user.
A user was authenticated by the RADIUS Server.
RADIUS rejects user. Pls check
RADIUS Server.
A user was not authenticated by the RADIUS
Server. Please check the RADIUS Server.
User logout because of session
timeout expired.
The router logged out a user whose session
expired.
User logout because of user
deassociation.
The router logged out a user who ended the
session.
User logout because of no
authentication response from
user.
The router logged out a user from which there
was no authentication response.
User logout because of idle
timeout expired.
The router logged out a user whose idle timeout
period expired.
User logout because of user
request.
A user logged out.
No response from RADIUS. Pls
check RADIUS Server.
There is no response message from the RADIUS
server, please check the RADIUS server.
Use RADIUS to authenticate user. The RADIUS server is operating as the
authentication server.
No Server to authenticate user.
There is no authentication server to authenticate
a user.
Table 86 ACL Setting Notes
216
PACKET
DIRECTION
DIRECTION
DESCRIPTION
(L to W)
LAN to WAN
ACL set for packets traveling from the LAN to the
WAN.
(W to L)
WAN to LAN
ACL set for packets traveling from the WAN to the
LAN.
P-660HN-T1h User’s Guide
Chapter 20 Logs
Table 86 ACL Setting Notes (continued)
PACKET
DIRECTION
DIRECTION
DESCRIPTION
(L to L/ZyXEL
Device)
LAN to LAN/
ZyXEL Device
ACL set for packets traveling from the LAN to the
LAN or the ZyXEL Device.
(W to W/ZyXEL
Device)
WAN to WAN/
ZyXEL Device
ACL set for packets traveling from the WAN to the
WAN or the ZyXEL Device.
Table 87 ICMP Notes
TYPE
CODE
DESCRIPTION
Echo Reply
Echo reply message
Destination Unreachable
Net unreachable
Host unreachable
Protocol unreachable
Port unreachable
A packet that needed fragmentation was dropped because it was set
to Don't Fragment (DF)
Source route failed
Source Quench
A gateway may discard internet datagrams if it does not have the
buffer space needed to queue the datagrams for output to the next
network on the route to the destination network.
Redirect
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
11
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
12
Pointer indicates the error
Timestamp
13
Timestamp request message
Timestamp Reply
14
15
P-660HN-T1h User’s Guide
Timestamp reply message
Information Request
217
Chapter 20 Logs
Table 87 ICMP Notes (continued)
TYPE
CODE
DESCRIPTION
Information request message
Information Reply
16
Information reply message
Table 88 Syslog Logs
LOG MESSAGE
DESCRIPTION
Mon dd
hr:mm:ss hostname
src=""
dst=""
msg="" note=""
devID="" cat="
"This message is sent by the system ("RAS"
displays as the system name if you haven’t
configured one) when the router generates a
syslog. The facility is defined in the web MAIN
MENU->LOGS->Log Settings page. The severity is
the log’s syslog class. The definition of messages
and notes are defined in the various log charts
throughout this appendix. The “devID” is the last
three characters of the MAC address of the router’s
LAN port. The “cat” is the same as the category in
the router’s logs.
The following table shows RFC-2408 ISAKMP payload types that the log displays.
Please refer to RFC 2408 for detailed information on each type.
Table 89 RFC-2408 ISAKMP Payload Types
218
LOG DISPLAY
PAYLOAD TYPE
SA
Security Association
PROP
Proposal
TRANS
Transform
KE
Key Exchange
ID
Identification
CER
Certificate
CER_REQ
Certificate Request
HASH
Hash
SIG
Signature
NONCE
Nonce
NOTFY
Notification
DEL
Delete
VID
Vendor ID
P-660HN-T1h User’s Guide
CHAPTER
21
Tools
21.1 Overview
This chapter explains how to upload new firmware, manage configuration files and
restart your ZyXEL Device.
Use the instructions in this chapter to change the device’s configuration file or
upgrade its firmware. After you configure your device, you can backup the
configuration file to a computer. That way if you later misconfigure the device, you
can upload the backed up configuration file to return to your previous settings.
You can alternately upload the factory default configuration file if you want to
return the device to the original default settings. The firmware determines the
device’s available features and functionality. You can download new firmware
releases from your nearest ZyXEL FTP site (or www.zyxel.com) to use to upgrade
your device’s performance.
Only use firmware for your device’s specific model. Refer to the
label on the bottom of your ZyXEL Device.
21.1.1 What You Can Do in the Tool Screens
• Use the Firmware Upgrade screen (Section 21.2 on page 219) to upload
firmware to your device.
• Use the Configuration screen (Section 21.3 on page 222) to backup and
restore device configurations. You can also reset your device settings back to
the factory default.
• Use the Restart screen (Section 21.4 on page 225) to restart your ZyXEL
device.
21.2 The Firmware Screen
Click Maintenance > Tools to open the Firmware screen. Follow the
instructions in this screen to upload firmware to your ZyXEL Device. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
After a successful upload, the system will reboot.
P-660HN-T1h User’s Guide
219
Chapter 21 Tools
Do NOT turn off the ZyXEL Device while firmware upload is in
progress!
Figure 102 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Table 90 Maintenance > Tools > Firmware
LABEL
DESCRIPTION
Current
Firmware
Version
This is the present Firmware version and the date created.
File Path
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse...
Click this to find the .bin file you want to upload. Remember that you
must decompress compressed (.zip) files before you can upload them.
Upload
Click this to begin the upload process. This process may take up to two
minutes.
After you see the Firmware Upload in Progress screen, wait two minutes
before logging into the ZyXEL Device again.
Figure 103 Firmware Upload In Progress
220
P-660HN-T1h User’s Guide
Chapter 21 Tools
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 104 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Firmware screen.
Figure 105 Error Message
P-660HN-T1h User’s Guide
221
Chapter 21 Tools
21.3 The Configuration Screen
Click Maintenance > Tools > Configuration. Information related to factory
defaults, backup configuration, and restoring configuration appears in this screen,
as shown next.
Figure 106 Maintenance > Tools > Configuration
Backup Configuration
Backup Configuration allows you to back up (save) the ZyXEL Device’s current
configuration to a file on your computer. Once your ZyXEL Device is configured
and functioning properly, it is highly recommended that you back up your
configuration file before making configuration changes. The backup configuration
file will be useful in case you need to return to your previous settings.
Click Backup to save the ZyXEL Device’s current configuration to your computer.
222
P-660HN-T1h User’s Guide
Chapter 21 Tools
Restore Configuration
Restore Configuration allows you to upload a new or previously saved
configuration file from your computer to your ZyXEL Device.
Table 91 Restore Configuration
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse...
Click this to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload
Click this to begin the upload process.
Do not turn off the ZyXEL Device while configuration file upload is
in progress.
After you see a “restore configuration successful” screen, you must then wait one
minute before logging into the ZyXEL Device again.
Figure 107 Configuration Upload Successful
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 108 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See Appendix A on page 245 for details on how to set up
your computer’s IP address.
P-660HN-T1h User’s Guide
223
Chapter 21 Tools
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 109 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 110 Reset Warning Message
Figure 111 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to Section 1.7 on page 26 for more
information on the RESET button.
224
P-660HN-T1h User’s Guide
Chapter 21 Tools
21.4 The Restart Screen
System restart allows you to reboot the ZyXEL Device remotely without turning
the power off. You may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
Figure 112 Maintenance > Tools >Restart
P-660HN-T1h User’s Guide
225
Chapter 21 Tools
226
P-660HN-T1h User’s Guide
CHAPTER
22
Diagnostic
22.1 Overview
These read-only screens display information to help you identify problems with the
ZyXEL Device.
22.1.1 What You Can Do in the Diagnostic Screens
• Use the General screen (Section 22.2 on page 227) to ping an IP address.
• Use the DSL Line screen (Section 22.3 on page 228) to view the DSL line
statistics and reset the ADSL line.
22.2 The General Screen
Use this screen to ping an IP address. Click Maintenance > Diagnostic to open
the screen shown next.
Figure 113 Maintenance > Diagnostic > General
P-660HN-T1h User’s Guide
227
Chapter 22 Diagnostic
The following table describes the fields in this screen.
Table 92 Maintenance > Diagnostic > General
LABEL
DESCRIPTION
TCP/IP
Address
Type the IP address of a computer that you want to ping in order to test a
connection.
Ping
Click this to ping the IP address that you entered.
22.3 The DSL Line Screen
Use this screen to view the DSL line statistics and reset the ADSL line. Click
Maintenance > Diagnostic > DSL Line to open the screen shown next.
Figure 114 Maintenance > Diagnostic > DSL Line
228
P-660HN-T1h User’s Guide
Chapter 22 Diagnostic
The following table describes the fields in this screen.
Table 93 Maintenance > Diagnostic > DSL Line
LABEL
DESCRIPTION
ATM Status
Click this to view your DSL connection’s Asynchronous Transfer Mode
(ATM) statistics. ATM is a networking technology that provides highspeed data transfer. ATM uses fixed-size packets of information called
cells. With ATM, a high QoS (Quality of Service) can be guaranteed.
The (Segmentation and Reassembly) SAR driver translates packets into
ATM cells. It also receives ATM cells and reassembles them into packets.
These counters are set back to zero whenever the device starts up.
inPkts is the number of good ATM cells that have been received.
inDiscards is the number of received ATM cells that were rejected.
outPkts is the number of ATM cells that have been sent.
outDiscards is the number of ATM cells sent that were rejected.
inF4Pkts is the number of ATM Operations, Administration, and
Management (OAM) F4 cells that have been received. See ITU
recommendation I.610 for more on OAM for ATM.
outF4Pkts is the number of ATM OAM F4 cells that have been sent.
inF5Pkts is the number of ATM OAM F5 cells that have been received.
outF5Pkts is the number of ATM OAM F5 cells that have been sent.
openChan is the number of times that the ZyXEL Device has opened a
logical DSL channel.
closeChan is the number of times that the ZyXEL Device has closed a
logical DSL channel.
txRate is the number of bytes transmitted per second.
rxRate is the number of bytes received per second.
ATM Loopback
Test
P-660HN-T1h User’s Guide
Click this to start the ATM loopback test. Make sure you have configured
at least one PVC with proper VPIs/VCIs before you begin this test. The
ZyXEL Device sends an OAM F5 packet to the DSLAM/ATM switch and
then returns it (loops it back) to the ZyXEL Device. The ATM loopback
test is useful for troubleshooting problems with the DSLAM and ATM
network.
229
Chapter 22 Diagnostic
Table 93 Maintenance > Diagnostic > DSL Line (continued)
LABEL
DESCRIPTION
DSL Line
Status
Click this to view statistics about the DSL connections.
noise margin downstream is the signal to noise ratio for the
downstream part of the connection (coming into the ZyXEL Device from
the ISP). It is measured in decibels. The higher the number the more
signal and less noise there is.
output power upstream is the amount of power (in decibels) that the
ZyXEL Device is using to transmit to the ISP.
attenuation downstream is the reduction in amplitude (in decibels) of
the DSL signal coming into the ZyXEL Device from the ISP.
Discrete Multi-Tone (DMT) modulation divides up a line’s bandwidth into
sub-carriers (sub-channels) of 4.3125 KHz each called tones. The rest of
the display is the line’s bit allocation. This is displayed as the number (in
hexadecimal format) of bits transmitted for each tone. This can be used
to determine the quality of the connection, whether a given sub-carrier
loop has sufficient margins to support certain ADSL transmission rates,
and possibly to determine whether particular specific types of
interference or line attenuation exist. Refer to the ITU-T G.992.1
recommendation for more information on DMT.
The better (or shorter) the line, the higher the number of bits transmitted
for a DMT tone. The maximum number of bits that can be transmitted per
DMT tone is 15. There will be some tones without any bits as there has to
be space between the upstream and downstream channels.
Reset ADSL
Line
Click this to reinitialize the ADSL line. The large text box above then
displays the progress and results of this operation, for example:
"Start to reset ADSL
Loading ADSL modem F/W...
Reset ADSL Line Successfully!"
Capture All
Logs
230
Click this to display information and statistics about your ZyXEL Device’s
ATM statistics, DSL connection statistics, DHCP settings, firmware
version, WAN and gateway IP address, VPI/VCI and LAN IP address.
P-660HN-T1h User’s Guide
CHAPTER
23
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• ZyXEL Device Access and Login
• Internet Access
23.1 Power, Hardware Connections, and LEDs
The ZyXEL Device does not turn on. None of the LEDs turn on.
Make sure the ZyXEL Device is turned on.
Make sure you are using the power adaptor or cord included with the ZyXEL
Device.
Make sure the power adaptor or cord is connected to the ZyXEL Device and
plugged in to an appropriate power source. Make sure the power source is turned
on.
Turn the ZyXEL Device off and on.
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See Section 1.6 on
page 25.
P-660HN-T1h User’s Guide
231
Chapter 23 Troubleshooting
Check the hardware connections.
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
Turn the ZyXEL Device off and on.
If the problem continues, contact the vendor.
23.2 ZyXEL Device Access and Login
I forgot the IP address for the ZyXEL Device.
The default IP address is 192.168.1.1.
If you changed the IP address and have forgotten it, you might get the IP address
of the ZyXEL Device by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the ZyXEL Device (it depends on the network), so enter this IP address
in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
Section 1.7 on page 26.
I forgot the password.
The default admin password is 1234.
If this does not work, you have to reset the device to its factory defaults. See
Section 1.7 on page 26.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
232
P-660HN-T1h User’s Guide
Chapter 23 Troubleshooting
• If you changed the IP address (Section 7.2 on page 89), use the new IP
address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for I forgot the IP address for the ZyXEL Device.
Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide.
Make sure your Internet browser does not block pop-up windows and has
JavaScripts and Java enabled. See Appendix C on page 279.
Reset the device to its factory defaults, and try to access the ZyXEL Device with
the default IP address. See Section 1.7 on page 26.
If the problem continues, contact the network administrator or vendor, or try one
of the advanced suggestions.
Advanced Suggestions
• Try to access the ZyXEL Device using another service, such as Telnet. If you can
access the ZyXEL Device, check the remote management settings and firewall
rules to find out why the ZyXEL Device does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a
computer that is connected to a ETHERNET port.
I can see the Login screen, but I cannot log in to the ZyXEL Device.
Make sure you have entered the password correctly. The default admin password
is 1234. The field is case-sensitive, so make sure [Caps Lock] is not on.
You cannot log in to the web configurator while someone is using Telnet to access
the ZyXEL Device. Log out of the ZyXEL Device in the other session, or ask the
person who is logged in to log out.
Turn the ZyXEL Device off and on.
If this does not work, you have to reset the device to its factory defaults. See
Section 23.1 on page 231.
I cannot Telnet to the ZyXEL Device.
See the troubleshooting suggestions for I cannot see or access the Login screen in
the web configurator. Ignore the suggestions about your browser.
P-660HN-T1h User’s Guide
233
Chapter 23 Troubleshooting
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to
upload new firmware.
See the troubleshooting suggestions for I cannot see or access the Login screen in
the web configurator. Ignore the suggestions about your browser.
23.3 Internet Access
I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide and Section 1.6 on page 25.
Make sure you entered your ISP account information correctly in the wizard. These
fields are case-sensitive, so make sure [Caps Lock] is not on.
If you are trying to access the Internet wirelessly, make sure the wireless settings
in the wireless client are the same as the settings in the AP.
If you are trying to access the Internet wirelessly, make sure you enabled the
wireless LAN and have selected the correct country and channel in which your
ZyXEL Device operates in the Wireless LAN > AP screen.
Disconnect all the cables from your device, and follow the directions in the Quick
Start Guide again.
If the problem continues, contact your ISP.
I cannot access the Internet anymore. I had access to the Internet (with the ZyXEL
Device), but my Internet connection is not available anymore.
234
Check the hardware connections, and make sure the LEDs are behaving as
expected. See the Quick Start Guide and Section 1.6 on page 25.
Turn the ZyXEL Device off and on.
If the problem continues, contact your ISP.
P-660HN-T1h User’s Guide
Chapter 23 Troubleshooting
The Internet connection is slow or intermittent.
There might be a lot of traffic on the network. Look at the LEDs, and check Section
1.6 on page 25. If the ZyXEL Device is sending or receiving a lot of information,
try closing some programs that use the Internet, especially peer-to-peer
applications.
Check the signal strength. If the signal strength is low, try moving your computer
closer to the ZyXEL Device if possible, and look around to see if there are any
devices that might be interfering with the wireless network (for example,
microwaves, other wireless networks, and so on).
Turn the ZyXEL Device off and on.
If the problem continues, contact the network administrator or vendor, or try one
of the advanced suggestions.
Advanced Suggestions
• Check the settings for QoS. If it is disabled, you might consider activating it. If it
is enabled, you might consider raising or lowering the priority for some
applications.
P-660HN-T1h User’s Guide
235
Chapter 23 Troubleshooting
236
P-660HN-T1h User’s Guide
CHAPTER
24
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware
features.
24.1 Hardware Specifications
Table 94 Hardware Specifications
Dimensions
210 x 142 x 57 mm
Weight
270g
Power Specification
12VDC 1A
Built-in Switch
Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45
Ethernet ports
ADSL Port
1 RJ-11 FXS POTS port
RESET Button
Restores factory defaults
Antenna
1 internal antenna, 2dBi
WPS Button
1 second: turn on or off WLAN
5 seconds: enable WPS (Wi-Fi Protected Setup)
Operation
Temperature
0º C ~ 40º C
Storage Temperature
-20º ~ 60º C
Operation Humidity
20% ~ 90% RH
Storage Humidity
20% ~ 90% RH
24.2 Firmware Specifications
Table 95 Firmware Specifications
Default IP Address
192.168.1.1
Default Subnet Mask
255.255.255.0 (24 bits)
P-660HN-T1h User’s Guide
237
Chapter 24 Product Specifications
Table 95 Firmware Specifications (continued)
Default Admin
Password
1234
DHCP Server IP Pool
192.168.1.32 to 192.168.1.64
Static DHCP
Addresses
10
URL Filtering
URL web page blocking
Static Routes
16
Device Management
Use the web configurator to easily configure the rich range of
features on the ZyXEL Device.
Wireless
Functionality
Allow the IEEE 802.11b/g/n wireless clients to connect to the
ZyXEL Device wirelessly. Enable wireless security (WEP, WPA(2),
WPA(2)-PSK) and/or MAC filtering to protect your wireless
network.
(wireless devices
only)
Firmware Upgrade
Download new firmware (when available) from the ZyXEL web site
and use the web configurator to put it on the ZyXEL Device.
Note: Only upload firmware for your specific model!
238
Configuration Backup
& Restoration
Make a copy of the ZyXEL Device’s configuration. You can put it
back on the ZyXEL Device later if you decide to revert back to an
earlier configuration.
Network Address
Translation (NAT)
Each computer on your network must have its own unique IP
address. Use NAT to convert your public IP address(es) to multiple
private IP addresses for the computers on your network.
Port Forwarding
If you have a server (mail or web server for example) on your
network, you can use this feature to let people access it from the
Internet.
DHCP (Dynamic Host
Configuration
Protocol)
Use this feature to have the ZyXEL Device assign IP addresses, an
IP default gateway and DNS servers to computers on your
network. Your device can also act as a surrogate DHCP server
(DHCP Relay) where it relays IP address assignment from the
actual real DHCP server to the clients.
Dynamic DNS
Support
With Dynamic DNS (Domain Name System) support, you can use
a fixed URL, www.zyxel.com for example, with a dynamic IP
address. You must register for this service with a Dynamic DNS
service provider.
IP Multicast
IP multicast is used to send traffic to a specific group of
computers. The ZyXEL Device supports versions 1 and 2 of IGMP
(Internet Group Management Protocol) used to join multicast
groups (see RFC 2236).
Time and Date
Get the current time and date from an external server when you
turn on your ZyXEL Device. You can also set the time manually.
These dates and times are then used in logs.
Logs
Use logs for troubleshooting. You can send logs from the ZyXEL
Device to an external syslog server.
Universal Plug and
Play (UPnP)
A UPnP-enabled device can dynamically join a network, obtain an
IP address and convey its capabilities to other devices on the
network.
P-660HN-T1h User’s Guide
Chapter 24 Product Specifications
Table 95 Firmware Specifications (continued)
Firewall
Your device has a stateful inspection firewall with DoS (Denial of
Service) protection. By default, when the firewall is activated, all
incoming traffic from the WAN to the LAN is blocked unless it is
initiated from the LAN. The firewall supports TCP/UDP inspection,
DoS detection and prevention, real time alerts, reports and logs.
URL Filtering
URL filtering allows you to block access to Internet web sites of
certain URL that you specify.
QoS (Quality of
Service)
You can efficiently manage traffic on your network by reserving
bandwidth and giving priority to certain types of traffic and/or to
particular computers.
Remote Management
This allows you to decide whether a service (HTTP or FTP traffic for
example) from a computer on a network (LAN or WAN for
example) can access the ZyXEL Device.
PPPoE Support
(RFC2516)
PPPoE (Point-to-Point Protocol over Ethernet) emulates a dial-up
connection. It allows your ISP to use their existing network
configuration with newer broadband technologies such as ADSL.
The PPPoE driver on your device is transparent to the computers
on the LAN, which see only Ethernet and are not aware of PPPoE
thus saving you from having to manage PPPoE clients on individual
computers.
Other PPPoE Features PPPoE idle time out
PPPoE dial on demand
Multiple PVC
(Permanent Virtual
Circuits) Support
Your device supports up to 8 Permanent Virtual Circuits (PVCs).
IP Alias
IP alias allows you to partition a physical network into logical
networks over the same Ethernet interface. Your device supports
three logical LAN interfaces via its single physical Ethernet
interface with the your device itself as the gateway for each LAN
network.
Packet Filters
Your device’s packet filtering function allows added network
security and management.
P-660HN-T1h User’s Guide
239
Chapter 24 Product Specifications
Table 95 Firmware Specifications (continued)
ADSL Standards
Support Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt
(G.992.1); G.lite (G992.2))
EOC specified in ITU-T G.992.1
ADSL2 G.dmt.bis (G.992.3)
ADSL2 G.lite.bis (G.992.4)
ADSL2+ (G.992.5)
Reach Extended ADSL (RE ADSL)
SRA (Seamless Rate Adaptation)
Auto-negotiating rate adaptation
ADSL physical connection ATM AAL5 (ATM Adaptation Layer type
5)
Support multi-protocol over AAL5 (RFC2684/1483)
Support PPP over ATM AAL5 (RFC2364)
PPP over Ethernet support for DSL connection (RFC 2516)
Support VC-based and LLC-based multiplexing
Support up to 8 PVCs
I.610 F4/F5 OAM
TR-067/TR-100 supported
240
P-660HN-T1h User’s Guide
Chapter 24 Product Specifications
Table 95 Firmware Specifications (continued)
Other Protocol
Support
SIP pass-through
DNS Proxy
Dynamic DNS (www.dyndns.org)
IP Alias
DHCP client/server/relay
RIP I/ RIP II supported
Support 16 IP Static routes by Gateway
IGMP v1 and v2
IP Policy Routing
UPnP support
Transparent bridging, VLAN-tagging pass-through bridge mode
Static DHCP
Management
Embedded Web Configurator(remove webhelp)
SNMP v1 & v2c with MIB II
Remote Management Control: Telnet, FTP, and Web.
TR-069 HTTPS
MTU adjustable on WebGUI
SMT
24.3 Wireless Features
Table 96 Wireless Features
Internal Antenna
The ZyXEL Device is equipped with one internal antenna to
provide a clear radio signal between the wireless stations and
the access points.
Wireless LAN MAC Address
Filtering
Your device can check the MAC addresses of wireless stations
against a list of allowed or denied MAC addresses.
WEP Encryption
WEP (Wired Equivalent Privacy) encrypts data frames before
transmitting over the wireless network to help keep network
communications private.
Wi-Fi Protected Access
Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i
security standard. Key differences between WPA and WEP
are user authentication and improved data encryption.
WPA2
WPA 2 is a wireless security standard that defines stronger
encryption, authentication and key management than WPA.
P-660HN-T1h User’s Guide
241
Chapter 24 Product Specifications
Table 96 Wireless Features
WMM QoS
WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you
to prioritize wireless traffic according to the delivery
requirements of individual services.
Other Wireless Features
WDS(wireless client: G-570S v2)
IEEE 802.11n Compliance
Frequency Range:2.4 GHz
Advanced Orthogonal Frequency Division Multiplexing
(OFDM)
Data Rates:150Mbps and Auto Fallback
EIRP: 22dBm
Wired Equivalent Privacy (WEP) Data Encryption 64/128
WLAN bridge to LAN
32 MAC Address filter
WPA, WPA-PSK, WPA2, WPA2-PSK
WPS
IEEE 802.1x (EAP-MD5, TLS and TTLS)
WMM
WDS
Multi BSSID (4 BSSIDs)
Wireless Scheduling
The following list, which is not exhaustive, illustrates the standards supported in
the ZyXEL Device.
Table 97 Standards Supported
242
STANDARD
DESCRIPTION
RFC 867
Daytime Protocol
RFC 868
Time Protocol.
RFC 1058
RIP-1 (Routing Information Protocol)
RFC 1112
IGMP v1
RFC 1305
Network Time Protocol (NTP version 3)
RFC 1483
Multiprotocol Encapsulation over ATM Adaptation Layer 5
RFC 1631
IP Network Address Translator (NAT)
RFC 1661
The Point-to-Point Protocol (PPP)
RFC 1723
RIP-2 (Routing Information Protocol)
RFC 2236
Internet Group Management Protocol, Version 2.
RFC 2364
PPP over AAL5 (PPP over ATM over ADSL)
RFC 2408
Internet Security Association and Key Management Protocol
(ISAKMP)
P-660HN-T1h User’s Guide
Chapter 24 Product Specifications
Table 97 Standards Supported (continued)
STANDARD
DESCRIPTION
RFC 2516
A Method for Transmitting PPP Over Ethernet (PPPoE)
RFC 2684
Multiprotocol Encapsulation over ATM Adaptation Layer 5.
RFC 2766
Network Address Translation - Protocol
IEEE 802.11
Also known by the brand Wi-Fi, denotes a set of Wireless LAN/
WLAN standards developed by working group 11 of the IEEE
LAN/MAN Standards Committee (IEEE 802).
IEEE 802.11b
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11g
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11n
Uses the 2.4 gigahertz (GHz) band
IEEE 802.11d
Standard for Local and Metropolitan Area Networks: Media
Access Control (MAC) Bridges
IEEE 802.11x
Port Based Network Access Control.
IEEE 802.11e QoS
IEEE 802.11 e Wireless LAN for Quality of Service
ANSI T1.413, Issue 2
Asymmetric Digital Subscriber Line (ADSL) standard.
G dmt(G.992.1)
G.992.1 Asymmetrical Digital Subscriber Line (ADSL)
Transceivers
ITU G.992.1 (G.DMT)
ITU standard for ADSL using discrete multitone modulation.
ITU G.992.2 (G. Lite)
ITU standard for ADSL using discrete multitone modulation.
ITU G.992.3
(G.dmt.bis)
ITU standard (also referred to as ADSL2) that extends the
capability of basic ADSL in data rates.
ITU G.992.4
(G.lite.bis)
ITU standard (also referred to as ADSL2) that extends the
capability of basic ADSL in data rates.
ITU G.992.5 (ADSL2+) ITU standard (also referred to as ADSL2+) that extends the
capability of basic ADSL by doubling the number of downstream
bits.
Microsoft PPTP
MS PPTP (Microsoft's implementation of Point to Point Tunneling
Protocol)
MBM v2
Media Bandwidth Management v2
RFC 2383
ST2+ over ATM Protocol Specification - UNI 3.1 Version
TR-069
TR-069 DSL Forum Standard for CPE Wan Management.
1.363.5
Compliant AAL5 SAR (Segmentation And Re-assembly)
P-660HN-T1h User’s Guide
243
Chapter 24 Product Specifications
24.4 Power Adaptor Specifications
Table 98 ZyXEL Device Series Power Adaptor Specifications
NORTH AMERICAN PLUG
STANDARDS
AC Power Adapter Model
12V 1A SOCB PA
Input Power
AC 120Volts/60Hz
Output Power
DC 12Volts/1.0A
Power Consumption
7.7 Watt max
Safety Standards
ANSI/UL 60950-1, CSA
60950-1
EUROPEAN PLUG
STANDARDS
AC Power Adapter Model
244
Input Power
AC 230Volts/50Hz
Output Power
DC 12Volts/1.0A
Power Consumption
8.3 Watt max
Safety Standards
CE, GS or TUV, EN60950-1
P-660HN-T1h User’s Guide
APPENDIX
Setting up Your Computer’s IP
Address
All computers must have a 10M or 100M Ethernet adapter card and TCP/IP
installed.
Windows 95/98/Me/NT/2000/XP/Vista, Macintosh OS 7 and later operating
systems and all versions of UNIX/LINUX include the software components you
need to install and use TCP/IP on your computer. Windows 3.1 requires the
purchase of a third-party TCP/IP application package.
TCP/IP should already be installed on computers using Windows NT/2000/XP,
Macintosh OS 7 and later operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP
settings in order to "communicate" with your network.
If you manually assign IP information instead of using dynamic assignment, make
sure that your computers have IP addresses that place them in the same subnet
as the ZyXEL Device’s LAN port.
P-660HN-T1h User’s Guide
245
Appendix A Setting up Your Computer’s IP Address
Windows 95/98/Me
Click Start, Settings, Control Panel and double-click the Network icon to open
the Network window.
Figure 115 WIndows 95/98/Me: Network: Configuration
Installing Components
The Network window Configuration tab displays a list of installed components.
You need a network adapter, the TCP/IP protocol and Client for Microsoft
Networks.
If you need the adapter:
In the Network window, click Add.
Select Adapter and then click Add.
Select the manufacturer and model of your network adapter and then click OK.
If you need TCP/IP:
246
In the Network window, click Add.
Select Protocol and then click Add.
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Select Microsoft from the list of manufacturers.
Select TCP/IP from the list of network protocols and then click OK.
If you need Client for Microsoft Networks:
Click Add.
Select Client and then click Add.
Select Microsoft from the list of manufacturers.
Select Client for Microsoft Networks from the list of network clients and then
click OK.
Restart your computer so the changes you made take effect.
Configuring
In the Network window Configuration tab, select your network adapter's TCP/IP
entry and click Properties
Click the IP Address tab.
• If your IP address is dynamic, select Obtain an IP address automatically.
• If you have a static IP address, select Specify an IP address and type your
information into the IP Address and Subnet Mask fields.
Figure 116 Windows 95/98/Me: TCP/IP Properties: IP Address
P-660HN-T1h User’s Guide
247
Appendix A Setting up Your Computer’s IP Address
Click the DNS Configuration tab.
• If you do not know your DNS information, select Disable DNS.
• If you know your DNS information, select Enable DNS and type the
information in the fields below (you may not need to fill them all in).
Figure 117 Windows 95/98/Me: TCP/IP Properties: DNS Configuration
Click the Gateway tab.
• If you do not know your gateway’s IP address, remove previously installed
gateways.
• If you have a gateway IP address, type it in the New gateway field and click
Add.
Click OK to save and close the TCP/IP Properties window.
Click OK to close the Network window. Insert the Windows CD if prompted.
Turn on your ZyXEL Device and restart your computer when prompted.
Verifying Settings
248
Click Start and then Run.
In the Run window, type "winipcfg" and then click OK to open the IP
Configuration window.
Select your network adapter. You should see your computer's IP address, subnet
mask and default gateway.
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
Click start (Start in Windows 2000/NT), Settings, Control Panel.
Figure 118 Windows XP: Start Menu
In the Control Panel, double-click Network Connections (Network and Dialup Connections in Windows 2000/NT).
Figure 119 Windows XP: Control Panel
P-660HN-T1h User’s Guide
249
Appendix A Setting up Your Computer’s IP Address
Right-click Local Area Connection and then click Properties.
Figure 120 Windows XP: Control Panel: Network Connections: Properties
Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and then
click Properties.
Figure 121 Windows XP: Local Area Connection Properties
250
The Internet Protocol TCP/IP Properties window opens (the General tab in
Windows XP).
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
• If you have a dynamic IP address click Obtain an IP address
automatically.
• If you have a static IP address click Use the following IP Address and fill in
the IP address, Subnet mask, and Default gateway fields.
• Click Advanced.
Figure 122 Windows XP: Internet Protocol (TCP/IP) Properties
If you do not know your gateway's IP address, remove any previously installed
gateways in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add.
• In TCP/IP Address, type an IP address in IP address and a subnet mask in
Subnet mask, and then click Add.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by clicking Add
in Default gateways.
• In TCP/IP Gateway Address, type the IP address of the default gateway in
Gateway. To manually configure a default metric (the number of transmission
hops), clear the Automatic metric check box and type a metric in Metric.
• Click Add.
• Repeat the previous three steps for each default gateway you want to add.
P-660HN-T1h User’s Guide
251
Appendix A Setting up Your Computer’s IP Address
• Click OK when finished.
Figure 123 Windows XP: Advanced TCP/IP Properties
In the Internet Protocol TCP/IP Properties window (the General tab in
Windows XP):
• Click Obtain DNS server address automatically if you do not know your
DNS server IP address(es).
• If you know your DNS server IP address(es), click Use the following DNS
server addresses, and type them in the Preferred DNS server and
Alternate DNS server fields.
252
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
If you have previously configured DNS servers, click Advanced and then the
DNS tab to order them.
Figure 124 Windows XP: Internet Protocol (TCP/IP) Properties
Click OK to close the Internet Protocol (TCP/IP) Properties window.
Click Close (OK in Windows 2000/NT) to close the Local Area Connection
Properties window.
10
Close the Network Connections window (Network and Dial-up Connections
in Windows 2000/NT).
11 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Click Start, All Programs, Accessories and then Command Prompt.
In the Command Prompt window, type "ipconfig" and then press [ENTER]. You
can also open Network Connections, right-click a network connection, click
Status and then click the Support tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
P-660HN-T1h User’s Guide
253
Appendix A Setting up Your Computer’s IP Address
Click the Start icon, Control Panel.
Figure 125 Windows Vista: Start Menu
In the Control Panel, double-click Network and Internet.
Figure 126 Windows Vista: Control Panel
Click Network and Sharing Center.
Figure 127 Windows Vista: Network And Internet
254
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Click Manage network connections.
Figure 128 Windows Vista: Network and Sharing Center
Right-click Local Area Connection and then click Properties.
Note: During this procedure, click Continue whenever Windows displays a screen
saying that it needs your permission to continue.
Figure 129 Windows Vista: Network and Sharing Center
P-660HN-T1h User’s Guide
255
Appendix A Setting up Your Computer’s IP Address
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Figure 130 Windows Vista: Local Area Connection Properties
The Internet Protocol Version 4 (TCP/IPv4) Properties window opens (the
General tab).
• If you have a dynamic IP address click Obtain an IP address
automatically.
• If you have a static IP address click Use the following IP address and fill in
the IP address, Subnet mask, and Default gateway fields.
256
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
• Click Advanced.
Figure 131 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
If you do not know your gateway's IP address, remove any previously installed
gateways in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add.
• In TCP/IP Address, type an IP address in IP address and a subnet mask in
Subnet mask, and then click Add.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by clicking Add
in Default gateways.
• In TCP/IP Gateway Address, type the IP address of the default gateway in
Gateway. To manually configure a default metric (the number of transmission
hops), clear the Automatic metric check box and type a metric in Metric.
• Click Add.
• Repeat the previous three steps for each default gateway you want to add.
P-660HN-T1h User’s Guide
257
Appendix A Setting up Your Computer’s IP Address
• Click OK when finished.
Figure 132 Windows Vista: Advanced TCP/IP Properties
In the Internet Protocol Version 4 (TCP/IPv4) Properties window, (the
General tab):
• Click Obtain DNS server address automatically if you do not know your
DNS server IP address(es).
• If you know your DNS server IP address(es), click Use the following DNS
server addresses, and type them in the Preferred DNS server and
Alternate DNS server fields.
258
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
If you have previously configured DNS servers, click Advanced and then the
DNS tab to order them.
Figure 133 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
10 Click OK to close the Internet Protocol Version 4 (TCP/IPv4) Properties
window.
11 Click Close to close the Local Area Connection Properties window.
12
Close the Network Connections window.
13 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Click Start, All Programs, Accessories and then Command Prompt.
In the Command Prompt window, type "ipconfig" and then press [ENTER]. You
can also open Network Connections, right-click a network connection, click
Status and then click the Support tab.
P-660HN-T1h User’s Guide
259
Appendix A Setting up Your Computer’s IP Address
Macintosh OS 8/9
Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/
IP Control Panel.
Figure 134 Macintosh OS 8/9: Apple Menu
260
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Select Ethernet built-in from the Connect via list.
Figure 135 Macintosh OS 8/9: TCP/IP
For dynamically assigned settings, select Using DHCP Server from the
Configure: list.
For statically assigned settings, do the following:
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address box.
Close the TCP/IP Control Panel.
Click Save if prompted, to save changes to your configuration.
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
P-660HN-T1h User’s Guide
261
Appendix A Setting up Your Computer’s IP Address
Macintosh OS X
Click the Apple menu, and click System Preferences to open the System
Preferences window.
Figure 136 Macintosh OS X: Apple Menu
Click Network in the icon bar.
• Select Automatic from the Location list.
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
For dynamically assigned settings, select Using DHCP from the Configure list.
Figure 137 Macintosh OS X: Network
262
For statically assigned settings, do the following:
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address box.
Click Apply Now and close the window.
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red
Hat Linux 9.0. Procedure, screens and file location may vary depending on your
Linux distribution and release version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
Click the Red Hat button (located on the bottom left corner), select System
Setting and click Network.
Figure 138 Red Hat 9.0: KDE: Network Configuration: Devices
P-660HN-T1h User’s Guide
263
Appendix A Setting up Your Computer’s IP Address
Double-click on the profile of the network card you wish to configure. The
Ethernet Device General screen displays as shown.
Figure 139 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address
settings with and select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in
the Address, Subnet mask, and Default Gateway Address fields.
Click OK to save the changes and close the Ethernet Device General screen.
If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.
Figure 140 Red Hat 9.0: KDE: Network Configuration: DNS
264
Click the Devices tab.
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Click the Activate button to apply the changes. The following screen displays.
Click Yes to save the changes in all screens.
Figure 141 Red Hat 9.0: KDE: Network Configuration: Activate
After the network card restart process is complete, make sure the Status is
Active in the Network Configuration screen.
Using Configuration Files
Follow the steps below to edit the network configuration files and set your
computer IP address.
Assuming that you have only one network card on the computer, locate the
ifconfig-eth0 configuration file (where eth0 is the name of the Ethernet card).
Open the configuration file with any plain text editor.
• If you have a dynamic IP address, enter dhcp in the BOOTPROTO= field. The
following figure shows an example.
Figure 142 Red Hat 9.0: Dynamic IP Address Setting in ifconfig-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
USERCTL=no
PEERDNS=yes
TYPE=Ethernet
P-660HN-T1h User’s Guide
265
Appendix A Setting up Your Computer’s IP Address
• If you have a static IP address, enter static in the BOOTPROTO= field. Type
IPADDR= followed by the IP address (in dotted decimal notation) and type
NETMASK= followed by the subnet mask. The following example shows an
example where the static IP address is 192.168.1.10 and the subnet mask is
255.255.255.0.
Figure 143 Red Hat 9.0: Static IP Address Setting in ifconfig-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.1.10
NETMASK=255.255.255.0
USERCTL=no
PEERDNS=yes
TYPE=Ethernet
If you know your DNS server IP address(es), enter the DNS server information in
the resolv.conf file in the /etc directory. The following figure shows an example
where two DNS server IP addresses are specified.
Figure 144 Red Hat 9.0: DNS Settings in resolv.conf
nameserver 172.23.5.1
nameserver 172.23.5.2
After you edit and save the configuration files, you must restart the network card.
Enter ./network restart in the /etc/rc.d/init.d directory. The following
figure shows an example.
Figure 145 Red Hat 9.0: Restart Ethernet Card
[root@localhost init.d]# network restart
Shutting down interface eth0:
Shutting down loopback interface:
Setting network parameters:
Bringing up loopback interface:
Bringing up interface eth0:
266
[OK]
[OK]
[OK]
[OK]
[OK]
P-660HN-T1h User’s Guide
Appendix A Setting up Your Computer’s IP Address
Verifying Settings
Enter ifconfig in a terminal screen to check your TCP/IP properties.
Figure 146 Red Hat 9.0: Checking TCP/IP Properties
[root@localhost]# ifconfig
eth0
Link encap:Ethernet HWaddr 00:50:BA:72:5B:44
inet addr:172.23.19.129 Bcast:172.23.19.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:717 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:730412 (713.2 Kb) TX bytes:1570 (1.5 Kb)
Interrupt:10 Base address:0x1000
[root@localhost]#
P-660HN-T1h User’s Guide
267
Appendix A Setting up Your Computer’s IP Address
268
P-660HN-T1h User’s Guide
APPENDIX
IP Addresses and Subnetting
This appendix introduces IP addresses and subnet masks.
IP addresses identify individual devices on a network. Every networking device
(including computers, servers, routers, printers, etc.) needs an IP address to
communicate across the network. These networking devices are also known as
hosts.
Subnet masks determine the maximum number of possible hosts on a network.
You can also use subnet masks to divide one network into multiple sub-networks.
Introduction to IP Addresses
One part of the IP address is the network number, and the other part is the host
ID. In the same way that houses on a street share a common street name, the
hosts on a network share a common network number. Similarly, as each house
has its own house number, each host on the network has its own unique
identifying number - the host ID. Routers use the network number to send packets
to the correct network, while the host ID determines to which host on the network
the packets are delivered.
Structure
An IP address is made up of four parts, written in dotted decimal notation (for
example, 192.168.1.1). Each of these four parts is known as an octet. An octet is
an eight-digit binary number (for example 11000000, which is 192 in decimal
notation).
Therefore, each octet has a possible range of 00000000 to 11111111 in binary, or
0 to 255 in decimal.
P-660HN-T1h User’s Guide
269
Appendix B IP Addresses and Subnetting
The following figure shows an example IP address in which the first three octets
(192.168.1) are the network number, and the fourth octet (16) is the host ID.
Figure 147 Network Number and Host ID
How much of the IP address is the network number and how much is the host ID
varies according to the subnet mask.
Subnet Masks
A subnet mask is used to determine which bits are part of the network number,
and which bits are part of the host ID (using a logical AND operation). The term
“subnet” is short for “sub-network”.
A subnet mask has 32 bits. If a bit in the subnet mask is a “1” then the
corresponding bit in the IP address is part of the network number. If a bit in the
subnet mask is “0” then the corresponding bit in the IP address is part of the host
ID.
The following example shows a subnet mask identifying the network number (in
bold text) and host ID of an IP address (192.168.1.2 in decimal).
Table 99 Subnet Masks
1ST
OCTET:
2ND
OCTET:
3RD
OCTET:
4TH
OCTET
(192)
(168)
(1)
(2)
IP Address (Binary)
11000000
10101000
00000001
00000010
Subnet Mask (Binary)
11111111
11111111
11111111
00000000
Network Number
11000000
10101000
00000001
Host ID
270
00000010
P-660HN-T1h User’s Guide
Appendix B IP Addresses and Subnetting
By convention, subnet masks always consist of a continuous sequence of ones
beginning from the leftmost bit of the mask, followed by a continuous sequence of
zeros, for a total number of 32 bits.
Subnet masks can be referred to by the size of the network number part (the bits
with a “1” value). For example, an “8-bit mask” means that the first 8 bits of the
mask are ones and the remaining 24 bits are zeroes.
Subnet masks are expressed in dotted decimal notation just like IP addresses. The
following examples show the binary and decimal notation for 8-bit, 16-bit, 24-bit
and 29-bit subnet masks.
Table 100 Subnet Masks
BINARY
1ST
OCTET
2ND
OCTET
3RD
OCTET
4TH
OCTET
DECIMAL
8-bit mask
11111111
00000000
00000000
00000000
255.0.0.0
16-bit
mask
11111111
11111111
00000000
00000000
255.255.0.0
24-bit
mask
11111111
11111111
11111111
00000000
255.255.255.0
29-bit
mask
11111111
11111111
11111111
11111000
255.255.255.24
Network Size
The size of the network number determines the maximum number of possible
hosts you can have on your network. The larger the number of network number
bits, the smaller the number of remaining host ID bits.
An IP address with host IDs of all zeros is the IP address of the network
(192.168.1.0 with a 24-bit subnet mask, for example). An IP address with host
IDs of all ones is the broadcast address for that network (192.168.1.255 with a
24-bit subnet mask, for example).
As these two IP addresses cannot be used for individual hosts, calculate the
maximum number of possible hosts in a network as follows:
Table 101 Maximum Host Numbers
MAXIMUM NUMBER OF
HOSTS
SUBNET MASK
HOST ID SIZE
8 bits
24 bits
224 – 2
16777214
16 bits
216
65534
255.0.0.0
16 bits 255.255.0.0
–2
24 bits 255.255.255.0
8 bits
2 –2
254
29 bits 255.255.255.2
48
3 bits
23 – 2
P-660HN-T1h User’s Guide
271
Appendix B IP Addresses and Subnetting
Notation
Since the mask is always a continuous number of ones beginning from the left,
followed by a continuous number of zeros for the remainder of the 32 bit mask,
you can simply specify the number of ones instead of writing the value of each
octet. This is usually specified by writing a “/” followed by the number of bits in
the mask after the address.
For example, 192.1.1.0 /25 is equivalent to saying 192.1.1.0 with subnet mask
255.255.255.128.
The following table shows some possible subnet masks using both notations.
Table 102 Alternative Subnet Mask Notation
SUBNET MASK
ALTERNATIVE
NOTATION
LAST OCTET
(BINARY)
LAST OCTET
(DECIMAL)
255.255.255.0
/24
0000 0000
255.255.255.128
/25
1000 0000
128
255.255.255.192
/26
1100 0000
192
255.255.255.224
/27
1110 0000
224
255.255.255.240
/28
1111 0000
240
255.255.255.248
/29
1111 1000
248
255.255.255.252
/30
1111 1100
252
Subnetting
You can use subnetting to divide one network into multiple sub-networks. In the
following example a network administrator creates two sub-networks to isolate a
group of servers from the rest of the company network for security reasons.
In this example, the company network address is 192.168.1.0. The first three
octets of the address (192.168.1) are the network number, and the remaining
octet is the host ID, allowing a maximum of 28 – 2 or 254 possible hosts.
272
P-660HN-T1h User’s Guide
Appendix B IP Addresses and Subnetting
The following figure shows the company network before subnetting.
Figure 148 Subnetting Example: Before Subnetting
You can “borrow” one of the host ID bits to divide the network 192.168.1.0 into
two separate sub-networks. The subnet mask is now 25 bits (255.255.255.128 or
/25).
The “borrowed” host ID bit can have a value of either 0 or 1, allowing two
subnets; 192.168.1.0 /25 and 192.168.1.128 /25.
The following figure shows the company network after subnetting. There are now
two sub-networks, A and B.
Figure 149 Subnetting Example: After Subnetting
P-660HN-T1h User’s Guide
273
Appendix B IP Addresses and Subnetting
In a 25-bit subnet the host ID has 7 bits, so each sub-network has a maximum of
27 – 2 or 126 possible hosts (a host ID of all zeroes is the subnet’s address itself,
all ones is the subnet’s broadcast address).
192.168.1.0 with mask 255.255.255.128 is subnet A itself, and 192.168.1.127
with mask 255.255.255.128 is its broadcast address. Therefore, the lowest IP
address that can be assigned to an actual host for subnet A is 192.168.1.1 and
the highest is 192.168.1.126.
Similarly, the host ID range for subnet B is 192.168.1.129 to 192.168.1.254.
Example: Four Subnets
The previous example illustrated using a 25-bit subnet mask to divide a 24-bit
address into two subnets. Similarly, to divide a 24-bit address into four subnets,
you need to “borrow” two host ID bits to give four possible combinations (00, 01,
10 and 11). The subnet mask is 26 bits
(11111111.11111111.11111111.11000000) or 255.255.255.192.
Each subnet contains 6 host ID bits, giving 26 - 2 or 62 hosts for each subnet (a
host ID of all zeroes is the subnet itself, all ones is the subnet’s broadcast
address).
Table 103 Subnet 1
IP/SUBNET MASK
NETWORK NUMBER
LAST OCTET BIT
VALUE
IP Address (Decimal)
192.168.1.
IP Address (Binary)
11000000.10101000.00000001.
00000000
Subnet Mask (Binary)
11111111.11111111.11111111.
11000000
Subnet Address:
192.168.1.0
Lowest Host ID: 192.168.1.1
Broadcast Address:
192.168.1.63
Highest Host ID: 192.168.1.62
Table 104 Subnet 2
274
IP/SUBNET MASK
NETWORK NUMBER
LAST OCTET BIT
VALUE
IP Address
192.168.1.
64
IP Address (Binary)
11000000.10101000.00000001.
01000000
Subnet Mask (Binary)
11111111.11111111.11111111.
11000000
Subnet Address:
192.168.1.64
Lowest Host ID: 192.168.1.65
Broadcast Address:
192.168.1.127
Highest Host ID: 192.168.1.126
P-660HN-T1h User’s Guide
Appendix B IP Addresses and Subnetting
Table 105 Subnet 3
IP/SUBNET MASK
NETWORK NUMBER
LAST OCTET BIT VALUE
IP Address
192.168.1.
128
IP Address (Binary)
11000000.10101000.00000001.
10000000
Subnet Mask (Binary)
11111111.11111111.11111111.
11000000
Subnet Address:
192.168.1.128
Lowest Host ID: 192.168.1.129
Broadcast Address:
192.168.1.191
Highest Host ID: 192.168.1.190
Table 106 Subnet 4
IP/SUBNET MASK
NETWORK NUMBER
LAST OCTET BIT VALUE
IP Address
192.168.1.
192
IP Address (Binary)
11000000.10101000.00000001.
11000000
Subnet Mask (Binary)
11111111.11111111.11111111.
11000000
Subnet Address:
192.168.1.192
Lowest Host ID: 192.168.1.193
Broadcast Address:
192.168.1.255
Highest Host ID: 192.168.1.254
Example: Eight Subnets
Similarly, use a 27-bit mask to create eight subnets (000, 001, 010, 011, 100,
101, 110 and 111).
The following table shows IP address last octet values for each subnet.
Table 107 Eight Subnets
SUBNET
SUBNET
ADDRESS
FIRST ADDRESS
LAST
ADDRESS
BROADCAST
ADDRESS
30
31
32
33
62
63
64
65
94
95
96
97
126
127
128
129
158
159
160
161
190
191
192
193
222
223
224
225
254
255
P-660HN-T1h User’s Guide
275
Appendix B IP Addresses and Subnetting
Subnet Planning
The following table is a summary for subnet planning on a network with a 24-bit
network number.
Table 108 24-bit Network Number Subnet Planning
NO. “BORROWED”
HOST BITS
SUBNET MASK
NO. SUBNETS
NO. HOSTS PER
SUBNET
255.255.255.128 (/25)
126
255.255.255.192 (/26)
62
255.255.255.224 (/27)
30
255.255.255.240 (/28)
16
14
255.255.255.248 (/29)
32
255.255.255.252 (/30)
64
255.255.255.254 (/31)
128
The following table is a summary for subnet planning on a network with a 16-bit
network number.
Table 109 16-bit Network Number Subnet Planning
NO. “BORROWED”
HOST BITS
SUBNET MASK
NO. SUBNETS NO. HOSTS PER
SUBNET
255.255.128.0 (/17)
32766
255.255.192.0 (/18)
16382
255.255.224.0 (/19)
8190
255.255.240.0 (/20)
16
4094
255.255.248.0 (/21)
32
2046
255.255.252.0 (/22)
64
1022
255.255.254.0 (/23)
128
510
255.255.255.0 (/24)
256
254
255.255.255.128 (/25)
512
126
10
255.255.255.192 (/26)
1024
62
11
255.255.255.224 (/27)
2048
30
12
255.255.255.240 (/28)
4096
14
13
255.255.255.248 (/29)
8192
14
255.255.255.252 (/30)
16384
15
255.255.255.254 (/31)
32768
Configuring IP Addresses
Where you obtain your network number depends on your particular situation. If
the ISP or your network administrator assigns you a block of registered IP
276
P-660HN-T1h User’s Guide
Appendix B IP Addresses and Subnetting
addresses, follow their instructions in selecting the IP addresses and the subnet
mask.
If the ISP did not explicitly give you an IP network number, then most likely you
have a single user account and the ISP will assign you a dynamic IP address when
the connection is established. If this is the case, it is recommended that you select
a network number from 192.168.0.0 to 192.168.255.0. The Internet Assigned
Number Authority (IANA) reserved this block of addresses specifically for private
use; please do not use any other number unless you are told otherwise. You must
also enable Network Address Translation (NAT) on the ZyXEL Device.
Once you have decided on the network number, pick an IP address for your ZyXEL
Device that is easy to remember (for instance, 192.168.1.1) but make sure that
no other device on your network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL Device will compute the subnet mask automatically based on the IP
address that you entered. You don't need to change the subnet mask computed by
the ZyXEL Device unless you are instructed to do otherwise.
Private IP Addresses
Every machine on the Internet must have a unique address. If your networks are
isolated from the Internet (running only between two branch offices, for example)
you can assign any IP addresses to the hosts without problems. However, the
Internet Assigned Numbers Authority (IANA) has reserved the following three
blocks of IP addresses specifically for private networks:
• 10.0.0.0
• 172.16.0.0
— 10.255.255.255
— 172.31.255.255
• 192.168.0.0 — 192.168.255.255
You can obtain your IP address from the IANA, from an ISP, or it can be assigned
from a private network. If you belong to a small organization and your Internet
access is through an ISP, the ISP can provide you with the Internet addresses for
your local networks. On the other hand, if you are part of a much larger
organization, you should consult your network administrator for the appropriate IP
addresses.
Regardless of your particular situation, do not create an arbitrary IP address;
always follow the guidelines above. For more information on address assignment,
please refer to RFC 1597, Address Allocation for Private Internets and RFC 1466,
Guidelines for Management of IP Address Space.
P-660HN-T1h User’s Guide
277
Appendix B IP Addresses and Subnetting
278
P-660HN-T1h User’s Guide
APPENDIX
Pop-up Windows, JavaScripts
and Java Permissions
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Note: Internet Explorer 6 screens are used here. Screens for other Internet Explorer
versions may vary.
Internet Explorer Pop-up Blockers
You may have to disable pop-up blocking to log into your device.
Either disable pop-up blocking (enabled by default in Windows XP SP (Service
Pack) 2) or allow pop-up blocking and create an exception for your device’s IP
address.
Disable Pop-up Blockers
In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off
Pop-up Blocker.
Figure 150 Pop-up Blocker
You can also check if pop-up blocking is disabled in the Pop-up Blocker section in
the Privacy tab.
P-660HN-T1h User’s Guide
279
Appendix C Pop-up Windows, JavaScripts and Java Permissions
In Internet Explorer, select Tools, Internet Options, Privacy.
Clear the Block pop-ups check box in the Pop-up Blocker section of the screen.
This disables any web pop-up blockers you may have enabled.
Figure 151 Internet Options: Privacy
Click Apply to save this setting.
Enable Pop-up Blockers with Exceptions
Alternatively, if you only want to allow pop-up windows from your device, see the
following steps.
280
In Internet Explorer, select Tools, Internet Options and then the Privacy tab.
P-660HN-T1h User’s Guide
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Select Settings…to open the Pop-up Blocker Settings screen.
Figure 152 Internet Options: Privacy
Type the IP address of your device (the web page that you do not want to have
blocked) with the prefix “http://”. For example, http://192.168.167.1.
P-660HN-T1h User’s Guide
281
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Click Add to move the IP address to the list of Allowed sites.
Figure 153 Pop-up Blocker Settings
Click Close to return to the Privacy screen.
Click Apply to save this setting.
JavaScripts
If pages of the web configurator do not display properly in Internet Explorer, check
that JavaScripts are allowed.
282
P-660HN-T1h User’s Guide
Appendix C Pop-up Windows, JavaScripts and Java Permissions
In Internet Explorer, click Tools, Internet Options and then the Security tab.
Figure 154 Internet Options: Security
Click the Custom Level... button.
Scroll down to Scripting.
Under Active scripting make sure that Enable is selected (the default).
Under Scripting of Java applets make sure that Enable is selected (the
default).
P-660HN-T1h User’s Guide
283
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Click OK to close the window.
Figure 155 Security Settings - Java Scripting
Java Permissions
284
From Internet Explorer, click Tools, Internet Options and then the Security
tab.
Click the Custom Level... button.
Scroll down to Microsoft VM.
Under Java permissions make sure that a safety level is selected.
P-660HN-T1h User’s Guide
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Click OK to close the window.
Figure 156 Security Settings - Java
JAVA (Sun)
From Internet Explorer, click Tools, Internet Options and then the Advanced
tab.
Make sure that Use Java 2 for  under Java (Sun) is selected.
P-660HN-T1h User’s Guide
285
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Click OK to close the window.
Figure 157 Java (Sun)
Mozilla Firefox
Mozilla Firefox 2.0 screens are used here. Screens for other versions may vary.
You can enable Java, Javascripts and pop-ups in one screen. Click Tools, then
click Options in the screen that appears.
Figure 158 Mozilla Firefox: Tools > Options
286
P-660HN-T1h User’s Guide
Appendix C Pop-up Windows, JavaScripts and Java Permissions
Click Content.to show the screen below. Select the check boxes as shown in the
following screen.
Figure 159 Mozilla Firefox Content Security
P-660HN-T1h User’s Guide
287
Appendix C Pop-up Windows, JavaScripts and Java Permissions
288
P-660HN-T1h User’s Guide
APPENDIX
Wireless LANs
Wireless LAN Topologies
This section discusses ad-hoc and infrastructure wireless LAN topologies.
Ad-hoc Wireless LAN Configuration
The simplest WLAN configuration is an independent (Ad-hoc) WLAN that connects
a set of computers with wireless adapters (A, B, C). Any time two or more wireless
adapters are within range of each other, they can set up an independent network,
which is commonly referred to as an ad-hoc network or Independent Basic Service
Set (IBSS). The following diagram shows an example of notebook computers
using wireless adapters to form an ad-hoc wireless LAN.
Figure 160 Peer-to-Peer Communication in an Ad-hoc Network
BSS
A Basic Service Set (BSS) exists when all communications between wireless
clients or between a wireless client and a wired network client go through one
access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless client A and B can access the wired network and communicate
P-660HN-T1h User’s Guide
289
Appendix D Wireless LANs
with each other. When Intra-BSS is disabled, wireless client A and B can still
access the wired network but cannot communicate with each other.
Figure 161 Basic Service Set
ESS
An Extended Service Set (ESS) consists of a series of overlapping BSSs, each
containing an access point, with each access point connected together by a wired
network. This wired connection between APs is called a Distribution System (DS).
This type of wireless LAN topology is called an Infrastructure WLAN. The Access
Points not only provide communication with the wired network but also mediate
wireless network traffic in the immediate neighborhood.
290
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
An ESSID (ESS IDentification) uniquely identifies each ESS. All access points and
their associated wireless clients within the same ESS must have the same ESSID
in order to communicate.
Figure 162 Infrastructure WLAN
Channel
A channel is the radio frequency(ies) used by wireless devices to transmit and
receive data. Channels available depend on your geographical area. You may have
a choice of channels (for your region) so you should use a channel different from
an adjacent AP (access point) to reduce interference. Interference occurs when
radio signals from different access points overlap causing interference and
degrading performance.
Adjacent channels partially overlap however. To avoid interference due to overlap,
your AP should be on a channel at least five channels away from a channel that an
adjacent AP is using. For example, if your region has 11 channels and an adjacent
AP is using channel 1, then you need to select a channel between 6 or 11.
RTS/CTS
A hidden node occurs when two stations are within range of the same access
point, but are not within range of each other. The following figure illustrates a
P-660HN-T1h User’s Guide
291
Appendix D Wireless LANs
hidden node. Both stations (STA) are within range of the access point (AP) or
wireless gateway, but out-of-range of each other, so they cannot "hear" each
other, that is they do not know if the channel is currently being used. Therefore,
they are considered hidden from each other.
Figure 163
RTS/CTS
When station A sends data to the AP, it might not know that the station B is
already using the channel. If these two stations send data at the same time,
collisions may occur when both sets of data arrive at the AP at the same time,
resulting in a loss of messages for both stations.
RTS/CTS is designed to prevent collisions due to hidden nodes. An RTS/CTS
defines the biggest size data frame you can send before an RTS (Request To
Send)/CTS (Clear to Send) handshake is invoked.
When a data frame exceeds the RTS/CTS value you set (between 0 to 2432
bytes), the station that wants to transmit this frame must first send an RTS
(Request To Send) message to the AP for permission to send it. The AP then
responds with a CTS (Clear to Send) message to all other stations within its range
to notify them to defer their transmission. It also reserves and confirms with the
requesting station the time frame for the requested transmission.
Stations can send frames smaller than the specified RTS/CTS directly to the AP
without the RTS (Request To Send)/CTS (Clear to Send) handshake.
You should only configure RTS/CTS if the possibility of hidden nodes exists on
your network and the "cost" of resending large frames is more than the extra
network overhead involved in the RTS (Request To Send)/CTS (Clear to Send)
handshake.
If the RTS/CTS value is greater than the Fragmentation Threshold value (see
next), then the RTS (Request To Send)/CTS (Clear to Send) handshake will never
occur as data frames will be fragmented before they reach RTS/CTS size.
Note: Enabling the RTS Threshold causes redundant network overhead that could
negatively affect the throughput performance instead of providing a remedy.
292
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
Fragmentation Threshold
A Fragmentation Threshold is the maximum data fragment size (between 256
and 2432 bytes) that can be sent in the wireless network before the AP will
fragment the packet into smaller data frames.
A large Fragmentation Threshold is recommended for networks not prone to
interference while you should set a smaller threshold for busy networks or
networks that are prone to interference.
If the Fragmentation Threshold value is smaller than the RTS/CTS value (see
previously) you set then the RTS (Request To Send)/CTS (Clear to Send)
handshake will never occur as data frames will be fragmented before they reach
RTS/CTS size.
Preamble Type
Preamble is used to signal that data is coming to the receiver. Short and long refer
to the length of the synchronization field in a packet.
Short preamble increases performance as less time sending preamble means
more time for sending data. All IEEE 802.11 compliant wireless adapters support
long preamble, but not all support short preamble.
Use long preamble if you are unsure what preamble mode other wireless devices
on the network support, and to provide more reliable communications in busy
wireless networks.
Use short preamble if you are sure all wireless devices on the network support it,
and to provide more efficient communications.
Use the dynamic setting to automatically use short preamble when all wireless
devices on the network support it, otherwise the ZyXEL Device uses long
preamble.
Note: The wireless devices MUST use the same preamble mode in order to
communicate.
IEEE 802.11g Wireless LAN
IEEE 802.11g is fully compatible with the IEEE 802.11b standard. This means an
IEEE 802.11b adapter can interface directly with an IEEE 802.11g access point
(and vice versa) at 11 Mbps or lower depending on range. IEEE 802.11g has
P-660HN-T1h User’s Guide
293
Appendix D Wireless LANs
several intermediate rate steps between the maximum and minimum data rates.
The IEEE 802.11g data rate and modulation are as follows:
Table 110 IEEE 802.11g
DATA RATE
(MBPS)
MODULATION
DBPSK (Differential Binary Phase Shift Keyed)
DQPSK (Differential Quadrature Phase Shift Keying)
5.5 / 11
CCK (Complementary Code Keying)
6/9/12/18/24/36/
48/54
OFDM (Orthogonal Frequency Division Multiplexing)
Wireless Security Overview
Wireless security is vital to your network to protect wireless communication
between wireless clients, access points and the wired network.
Wireless security methods available on the ZyXEL Device are data encryption,
wireless client authentication, restricting access by device MAC address and hiding
the ZyXEL Device identity.
The following figure shows the relative effectiveness of these wireless security
methods available on your ZyXEL Device.
Table 111 Wireless Security Levels
SECURITY
LEVEL
Least
Secure
SECURITY TYPE
Unique SSID (Default)
Unique SSID with Hide SSID Enabled
MAC Address Filtering
WEP Encryption
IEEE802.1x EAP with RADIUS Server
Authentication
Wi-Fi Protected Access (WPA)
WPA2
Most Secure
Note: You must enable the same wireless security settings on the ZyXEL Device and
on all wireless clients that you want to associate with it.
294
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
IEEE 802.1x
In June 2001, the IEEE 802.1x standard was designed to extend the features of
IEEE 802.11 to support extended authentication as well as providing additional
accounting and control features. It is supported by Windows XP and a number of
network devices. Some advantages of IEEE 802.1x are:
• User based identification that allows for roaming.
• Support for RADIUS (Remote Authentication Dial In User Service, RFC 2138,
2139) for centralized user profile and accounting management on a network
RADIUS server.
• Support for EAP (Extensible Authentication Protocol, RFC 2486) that allows
additional authentication methods to be deployed with no changes to the access
point or the wireless clients.
RADIUS
RADIUS is based on a client-server model that supports authentication,
authorization and accounting. The access point is the client and the server is the
RADIUS server. The RADIUS server handles the following tasks:
• Authentication
Determines the identity of the users.
• Authorization
Determines the network services available to authenticated users once they are
connected to the network.
• Accounting
Keeps track of the client’s network activity.
RADIUS is a simple package exchange in which your AP acts as a message relay
between the wireless client and the network RADIUS server.
Types of RADIUS Messages
The following types of RADIUS messages are exchanged between the access point
and the RADIUS server for user authentication:
• Access-Request
Sent by an access point requesting authentication.
• Access-Reject
Sent by a RADIUS server rejecting access.
• Access-Accept
Sent by a RADIUS server allowing access.
P-660HN-T1h User’s Guide
295
Appendix D Wireless LANs
• Access-Challenge
Sent by a RADIUS server requesting more information in order to allow access.
The access point sends a proper response from the user and then sends another
Access-Request message.
The following types of RADIUS messages are exchanged between the access point
and the RADIUS server for user accounting:
• Accounting-Request
Sent by the access point requesting accounting.
• Accounting-Response
Sent by the RADIUS server to indicate that it has started or stopped accounting.
In order to ensure network security, the access point and the RADIUS server use a
shared secret key, which is a password, they both know. The key is not sent over
the network. In addition to the shared key, password information exchanged is
also encrypted to protect the network from unauthorized access.
Types of EAP Authentication
This section discusses some popular authentication types: EAP-MD5, EAP-TLS,
EAP-TTLS, PEAP and LEAP. Your wireless LAN device may not support all
authentication types.
EAP (Extensible Authentication Protocol) is an authentication protocol that runs on
top of the IEEE 802.1x transport mechanism in order to support multiple types of
user authentication. By using EAP to interact with an EAP-compatible RADIUS
server, an access point helps a wireless station and a RADIUS server perform
authentication.
The type of authentication you use depends on the RADIUS server and an
intermediary AP(s) that supports IEEE 802.1x. .
For EAP-TLS authentication type, you must first have a wired connection to the
network and obtain the certificate(s) from a certificate authority (CA). A certificate
(also called digital IDs) can be used to authenticate users and a CA issues
certificates and guarantees the identity of each certificate owner.
EAP-MD5 (Message-Digest Algorithm 5)
MD5 authentication is the simplest one-way authentication method. The
authentication server sends a challenge to the wireless client. The wireless client
‘proves’ that it knows the password by encrypting the password with the challenge
and sends back the information. Password is not sent in plain text.
296
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
However, MD5 authentication has some weaknesses. Since the authentication
server needs to get the plaintext passwords, the passwords must be stored. Thus
someone other than the authentication server may access the password file. In
addition, it is possible to impersonate an authentication server as MD5
authentication method does not perform mutual authentication. Finally, MD5
authentication method does not support data encryption with dynamic session
key. You must configure WEP encryption keys for data encryption.
EAP-TLS (Transport Layer Security)
With EAP-TLS, digital certifications are needed by both the server and the wireless
clients for mutual authentication. The server presents a certificate to the client.
After validating the identity of the server, the client sends a different certificate to
the server. The exchange of certificates is done in the open before a secured
tunnel is created. This makes user identity vulnerable to passive attacks. A digital
certificate is an electronic ID card that authenticates the sender’s identity.
However, to implement EAP-TLS, you need a Certificate Authority (CA) to handle
certificates, which imposes a management overhead.
EAP-TTLS (Tunneled Transport Layer Service)
EAP-TTLS is an extension of the EAP-TLS authentication that uses certificates for
only the server-side authentications to establish a secure connection. Client
authentication is then done by sending username and password through the
secure connection, thus client identity is protected. For client authentication, EAPTTLS supports EAP methods and legacy authentication methods such as PAP,
CHAP, MS-CHAP and MS-CHAP v2.
PEAP (Protected EAP)
Like EAP-TTLS, server-side certificate authentication is used to establish a secure
connection, then use simple username and password methods through the
secured connection to authenticate the clients, thus hiding client identity.
However, PEAP only supports EAP methods, such as EAP-MD5, EAP-MSCHAPv2
and EAP-GTC (EAP-Generic Token Card), for client authentication. EAP-GTC is
implemented only by Cisco.
LEAP
LEAP (Lightweight Extensible Authentication Protocol) is a Cisco implementation of
IEEE 802.1x.
P-660HN-T1h User’s Guide
297
Appendix D Wireless LANs
Dynamic WEP Key Exchange
The AP maps a unique key that is generated with the RADIUS server. This key
expires when the wireless connection times out, disconnects or reauthentication
times out. A new WEP key is generated each time reauthentication is performed.
If this feature is enabled, it is not necessary to configure a default encryption key
in the wireless security configuration screen. You may still configure and store
keys, but they will not be used while dynamic WEP is enabled.
Note: EAP-MD5 cannot be used with Dynamic WEP Key Exchange
For added security, certificate-based authentications (EAP-TLS, EAP-TTLS and
PEAP) use dynamic keys for data encryption. They are often deployed in corporate
environments, but for public deployment, a simple user name and password pair
is more practical. The following table is a comparison of the features of
authentication types.
Table 112 Comparison of EAP Authentication Types
EAP-MD5
EAP-TLS
EAP-TTLS
PEAP
LEAP
Mutual Authentication
No
Yes
Yes
Yes
Yes
Certificate – Client
No
Yes
Optional
Optional
No
Certificate – Server
No
Yes
Yes
Yes
No
Dynamic Key Exchange
No
Yes
Yes
Yes
Yes
Credential Integrity
None
Strong
Strong
Strong
Moderate
Deployment Difficulty
Easy
Hard
Moderate
Moderate
Moderate
Client Identity
Protection
No
No
Yes
Yes
No
WPA and WPA2
Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2
(IEEE 802.11i) is a wireless security standard that defines stronger encryption,
authentication and key management than WPA.
Key differences between WPA or WPA2 and WEP are improved data encryption and
user authentication.
If both an AP and the wireless clients support WPA2 and you have an external
RADIUS server, use WPA2 for stronger data encryption. If you don't have an
external RADIUS server, you should use WPA2-PSK (WPA2-Pre-Shared Key) that
only requires a single (identical) password entered into each access point, wireless
gateway and wireless client. As long as the passwords match, a wireless client will
be granted access to a WLAN.
298
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
If the AP or the wireless clients do not support WPA2, just use WPA or WPA-PSK
depending on whether you have an external RADIUS server or not.
Select WEP only when the AP and/or wireless clients do not support WPA or WPA2.
WEP is less secure than WPA or WPA2.
Encryption
WPA improves data encryption by using Temporal Key Integrity Protocol (TKIP),
Message Integrity Check (MIC) and IEEE 802.1x. WPA2 also uses TKIP when
required for compatibility reasons, but offers stronger encryption than TKIP with
Advanced Encryption Standard (AES) in the Counter mode with Cipher block
chaining Message authentication code Protocol (CCMP).
TKIP uses 128-bit keys that are dynamically generated and distributed by the
authentication server. AES (Advanced Encryption Standard) is a block cipher that
uses a 256-bit mathematical algorithm called Rijndael. They both include a perpacket key mixing function, a Message Integrity Check (MIC) named Michael, an
extended initialization vector (IV) with sequencing rules, and a re-keying
mechanism.
WPA and WPA2 regularly change and rotate the encryption keys so that the same
encryption key is never used twice.
The RADIUS server distributes a Pairwise Master Key (PMK) key to the AP that
then sets up a key hierarchy and management system, using the PMK to
dynamically generate unique data encryption keys to encrypt every data packet
that is wirelessly communicated between the AP and the wireless clients. This all
happens in the background automatically.
The Message Integrity Check (MIC) is designed to prevent an attacker from
capturing data packets, altering them and resending them. The MIC provides a
strong mathematical function in which the receiver and the transmitter each
compute and then compare the MIC. If they do not match, it is assumed that the
data has been tampered with and the packet is dropped.
By generating unique data encryption keys for every data packet and by creating
an integrity checking mechanism (MIC), with TKIP and AES it is more difficult to
decrypt data on a Wi-Fi network than WEP and difficult for an intruder to break
into the network.
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The
only difference between the two is that WPA(2)-PSK uses a simple common
password, instead of user-specific credentials. The common-password approach
makes WPA(2)-PSK susceptible to brute-force password-guessing attacks but it’s
still an improvement over WEP as it employs a consistent, single, alphanumeric
password to derive a PMK which is used to generate unique temporal encryption
P-660HN-T1h User’s Guide
299
Appendix D Wireless LANs
keys. This prevent all wireless devices sharing the same encryption keys. (a
weakness of WEP)
User Authentication
WPA and WPA2 apply IEEE 802.1x and Extensible Authentication Protocol (EAP) to
authenticate wireless clients using an external RADIUS database. WPA2 reduces
the number of key exchange messages from six to four (CCMP 4-way handshake)
and shortens the time required to connect to a network. Other WPA2
authentication features that are different from WPA include key caching and preauthentication. These two features are optional and may not be supported in all
wireless devices.
Key caching allows a wireless client to store the PMK it derived through a
successful authentication with an AP. The wireless client uses the PMK when it tries
to connect to the same AP and does not need to go with the authentication
process again.
Pre-authentication enables fast roaming by allowing the wireless client (already
connecting to an AP) to perform IEEE 802.1x authentication with another AP
before connecting to it.
Wireless Client WPA Supplicants
A wireless client supplicant is the software that runs on an operating system
instructing the wireless client how to use WPA. At the time of writing, the most
widely available supplicant is the WPA patch for Windows XP, Funk Software's
Odyssey client.
The Windows XP patch is a free download that adds WPA capability to Windows
XP's built-in "Zero Configuration" wireless client. However, you must run Windows
XP to use it.
WPA(2) with RADIUS Application Example
To set up WPA(2), you need the IP address of the RADIUS server, its port number
(default is 1812), and the RADIUS shared secret. A WPA(2) application example
with an external RADIUS server looks as follows. "A" is the RADIUS server. "DS" is
the distribution system.
300
The AP passes the wireless client's authentication request to the RADIUS server.
The RADIUS server then checks the user's identification against its database and
grants or denies network access accordingly.
A 256-bit Pairwise Master Key (PMK) is derived from the authentication process by
the RADIUS server and the client.
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
The RADIUS server distributes the PMK to the AP. The AP then sets up a key
hierarchy and management system, using the PMK to dynamically generate
unique data encryption keys. The keys are used to encrypt every data packet that
is wirelessly communicated between the AP and the wireless clients.
Figure 164 WPA(2) with RADIUS Application Example
WPA(2)-PSK Application Example
A WPA(2)-PSK application looks as follows.
First enter identical passwords into the AP and all wireless clients. The Pre-Shared
Key (PSK) must consist of between 8 and 63 ASCII characters or 64 hexadecimal
characters (including spaces and symbols).
The AP checks each wireless client's password and allows it to join the network
only if the password matches.
The AP and wireless clients generate a common PMK (Pairwise Master Key). The
key itself is not sent over the network, but is derived from the PSK and the SSID.
P-660HN-T1h User’s Guide
301
Appendix D Wireless LANs
The AP and wireless clients use the TKIP or AES encryption process, the PMK and
information exchanged in a handshake to create temporal encryption keys. They
use these keys to encrypt data exchanged between them.
Figure 165 WPA(2)-PSK Authentication
Security Parameters Summary
Refer to this table to see what other security parameters you should configure for
each authentication method or key management protocol type. MAC address
filters are not dependent on how you configure these security features.
Table 113 Wireless Security Relational Matrix
AUTHENTICATION
METHOD/ KEY
MANAGEMENT
PROTOCOL
ENCRYPTIO ENTER
IEEE 802.1X
N METHOD MANUAL KEY
Open
None
No
Disable
Enable without Dynamic WEP
Key
Open
Shared
302
WEP
WEP
No
Enable with Dynamic WEP Key
Yes
Enable without Dynamic WEP
Key
Yes
Disable
No
Enable with Dynamic WEP Key
Yes
Enable without Dynamic WEP
Key
Yes
Disable
WPA
TKIP/AES
No
Enable
WPA-PSK
TKIP/AES
Yes
Disable
WPA2
TKIP/AES
No
Enable
WPA2-PSK
TKIP/AES
Yes
Disable
P-660HN-T1h User’s Guide
Appendix D Wireless LANs
Antenna Overview
An antenna couples RF signals onto air. A transmitter within a wireless device
sends an RF signal to the antenna, which propagates the signal through the air.
The antenna also operates in reverse by capturing RF signals from the air.
Positioning the antennas properly increases the range and coverage area of a
wireless LAN.
Antenna Characteristics
Frequency
An antenna in the frequency of 2.4GHz (IEEE 802.11b and IEEE 802.11g) or 5GHz
(IEEE 802.11a) is needed to communicate efficiently in a wireless LAN
Radiation Pattern
A radiation pattern is a diagram that allows you to visualize the shape of the
antenna’s coverage area.
Antenna Gain
Antenna gain, measured in dB (decibel), is the increase in coverage within the RF
beam width. Higher antenna gain improves the range of the signal for better
communications.
For an indoor site, each 1 dB increase in antenna gain results in a range increase
of approximately 2.5%. For an unobstructed outdoor site, each 1dB increase in
gain results in a range increase of approximately 5%. Actual results may vary
depending on the network environment.
Antenna gain is sometimes specified in dBi, which is how much the antenna
increases the signal power compared to using an isotropic antenna. An isotropic
antenna is a theoretical perfect antenna that sends out radio signals equally well
in all directions. dBi represents the true gain that the antenna provides.
Types of Antennas for WLAN
There are two types of antennas used for wireless LAN applications.
P-660HN-T1h User’s Guide
303
Appendix D Wireless LANs
• Omni-directional antennas send the RF signal out in all directions on a horizontal
plane. The coverage area is torus-shaped (like a donut) which makes these
antennas ideal for a room environment. With a wide coverage area, it is possible
to make circular overlapping coverage areas with multiple access points.
• Directional antennas concentrate the RF signal in a beam, like a flashlight does
with the light from its bulb. The angle of the beam determines the width of the
coverage pattern. Angles typically range from 20 degrees (very directional) to
120 degrees (less directional). Directional antennas are ideal for hallways and
outdoor point-to-point applications.
Positioning Antennas
In general, antennas should be mounted as high as practically possible and free of
obstructions. In point-to–point application, position both antennas at the same
height and in a direct line of sight to each other to attain the best performance.
For omni-directional antennas mounted on a table, desk, and so on, point the
antenna up. For omni-directional antennas mounted on a wall or ceiling, point the
antenna down. For a single AP application, place omni-directional antennas as
close to the center of the coverage area as possible.
For directional antennas, point the antenna in the direction of the desired
coverage area.
304
P-660HN-T1h User’s Guide
APPENDIX
Services
The following table lists some commonly-used services and their associated
protocols and port numbers.
• Name: This is a short, descriptive name for the service. You can use this one or
create a different one, if you like.
• Protocol: This is the type of IP protocol used by the service. If this is TCP/
UDP, then the service uses the same port number with TCP and UDP. If this is
USER-DEFINED, the Port(s) is the IP protocol number, not the port number.
• Port(s): This value depends on the Protocol.
• If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number.
• If the Protocol is USER, this is the IP protocol number.
• Description: This is a brief explanation of the applications that use this service
or the situations in which this service is used.
P-660HN-T1h User’s Guide
305
Appendix E Services
Table 114 Examples of Services
306
NAME
PROTOCOL
PORT(S)
DESCRIPTION
AH
(IPSEC_TUNNEL)
User-Defined
51
The IPSEC AH (Authentication Header)
tunneling protocol uses this service.
AIM
TCP
5190
AOL’s Internet Messenger service.
AUTH
TCP
113
Authentication protocol used by some
servers.
BGP
TCP
179
Border Gateway Protocol.
BOOTP_CLIENT
UDP
68
DHCP Client.
BOOTP_SERVER
UDP
67
DHCP Server.
CU-SEEME
TCP/UDP
7648
A popular videoconferencing solution
from White Pines Software.
TCP/UDP
24032
DNS
TCP/UDP
53
Domain Name Server, a service that
matches web names (for instance
www.zyxel.com) to IP numbers.
ESP
(IPSEC_TUNNEL)
User-Defined
50
The IPSEC ESP (Encapsulation
Security Protocol) tunneling protocol
uses this service.
FINGER
TCP
79
Finger is a UNIX or Internet related
command that can be used to find out
if a user is logged on.
FTP
TCP
20
TCP
21
File Transfer Protocol, a program to
enable fast transfer of files, including
large files that may not be possible by
e-mail.
H.323
TCP
1720
NetMeeting uses this protocol.
HTTP
TCP
80
Hyper Text Transfer Protocol - a client/
server protocol for the world wide
web.
HTTPS
TCP
443
HTTPS is a secured http session often
used in e-commerce.
ICMP
User-Defined
Internet Control Message Protocol is
often used for diagnostic purposes.
ICQ
UDP
4000
This is a popular Internet chat
program.
IGMP
(MULTICAST)
User-Defined
Internet Group Multicast Protocol is
used when sending packets to a
specific group of hosts.
IKE
UDP
500
The Internet Key Exchange algorithm
is used for key distribution and
management.
IMAP4
TCP
143
The Internet Message Access Protocol
is used for e-mail.
IMAP4S
TCP
993
This is a more secure version of IMAP4
that runs over SSL.
IRC
TCP/UDP
6667
This is another popular Internet chat
program.
P-660HN-T1h User’s Guide
Appendix E Services
Table 114 Examples of Services (continued)
NAME
PROTOCOL
PORT(S)
DESCRIPTION
MSN Messenger
TCP
1863
Microsoft Networks’ messenger
service uses this protocol.
NetBIOS
TCP/UDP
137
TCP/UDP
138
The Network Basic Input/Output
System is used for communication
between computers in a LAN.
TCP/UDP
139
TCP/UDP
445
NEW-ICQ
TCP
5190
An Internet chat program.
NEWS
TCP
144
A protocol for news groups.
NFS
UDP
2049
Network File System - NFS is a client/
server distributed file service that
provides transparent file sharing for
network environments.
NNTP
TCP
119
Network News Transport Protocol is
the delivery mechanism for the
USENET newsgroup service.
PING
User-Defined
Packet INternet Groper is a protocol
that sends out ICMP echo requests to
test whether or not a remote host is
reachable.
POP3
TCP
110
Post Office Protocol version 3 lets a
client computer get e-mail from a
POP3 server through a temporary
connection (TCP/IP or other).
POP3S
TCP
995
This is a more secure version of POP3
that runs over SSL.
PPTP
TCP
1723
Point-to-Point Tunneling Protocol
enables secure transfer of data over
public networks. This is the control
channel.
PPTP_TUNNEL
(GRE)
User-Defined
47
PPTP (Point-to-Point Tunneling
Protocol) enables secure transfer of
data over public networks. This is the
data channel.
RCMD
TCP
512
Remote Command Service.
REAL_AUDIO
TCP
7070
A streaming audio service that
enables real time sound over the web.
REXEC
TCP
514
Remote Execution Daemon.
RLOGIN
TCP
513
Remote Login.
ROADRUNNER
TCP/UDP
1026
This is an ISP that provides services
mainly for cable modems.
RTELNET
TCP
107
Remote Telnet.
RTSP
TCP/UDP
554
The Real Time Streaming (media
control) Protocol (RTSP) is a remote
control for multimedia on the
Internet.
P-660HN-T1h User’s Guide
307
Appendix E Services
Table 114 Examples of Services (continued)
308
NAME
PROTOCOL
PORT(S)
DESCRIPTION
SFTP
TCP
115
The Simple File Transfer Protocol is an
old way of transferring files between
computers.
SMTP
TCP
25
Simple Mail Transfer Protocol is the
message-exchange standard for the
Internet. SMTP enables you to move
messages from one e-mail server to
another.
SMTPS
TCP
465
This is a more secure version of SMTP
that runs over SSL.
SNMP
TCP/UDP
161
Simple Network Management
Program.
SNMP-TRAPS
TCP/UDP
162
Traps for use with the SNMP
(RFC:1215).
SQL-NET
TCP
1521
Structured Query Language is an
interface to access data on many
different types of database systems,
including mainframes, midrange
systems, UNIX systems and network
servers.
SSDP
UDP
1900
The Simple Service Discovery Protocol
supports Universal Plug-and-Play
(UPnP).
SSH
TCP/UDP
22
Secure Shell Remote Login Program.
STRM WORKS
UDP
1558
Stream Works Protocol.
SYSLOG
UDP
514
Syslog allows you to send system logs
to a UNIX server.
TACACS
UDP
49
Login Host Protocol used for (Terminal
Access Controller Access Control
System).
TELNET
TCP
23
Telnet is the login and terminal
emulation protocol common on the
Internet and in UNIX environments. It
operates over TCP/IP networks. Its
primary function is to allow users to
log into remote host systems.
VDOLIVE
TCP
7000
UDP
userdefined
A videoconferencing solution. The UDP
port number is specified in the
application.
P-660HN-T1h User’s Guide
APPENDIX
Legal Information
Copyright
Copyright © 2010 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole,
transcribed, stored in a retrieval system, translated into any language, or
transmitted in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, photocopying, manual, or otherwise, without the prior written
permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.
Disclaimer
ZyXEL does not assume any liability arising out of the application or use of any
products, or software described herein. Neither does it convey any license under
its patent rights nor the patent rights of others. ZyXEL further reserves the right
to make changes in any products described herein without notice. This publication
is subject to change without notice.
Trademarks
ZyNOS (ZyXEL Network Operating System) is a registered trademark of ZyXEL
Communications, Inc. Other trademarks mentioned in this publication are used for
identification purposes only and may be properties of their respective owners.
Certifications
Federal Communications Commission (FCC) Interference Statement
The device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
P-660HN-T1h User’s Guide
309
Appendix F Legal Information
• This device must accept any interference received, including interference that
may cause undesired operations.
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this device does cause harmful interference to radio/television reception, which
can be determined by turning the device off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
• This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
• IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmwarelimited to channels 1 through 11.
• To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
注意 !
依據
低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用
者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現
有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍
受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
310
P-660HN-T1h User’s Guide
Appendix F Legal Information
本機限在不干擾合法電臺與不受被干擾保障條件下於室內使用。
減少電磁波影響，請妥適使用。
Notices
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device has been designed for the WLAN 2.4 GHz network throughout the EC
region and Switzerland, with restrictions in France.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Viewing Certifications
Go to http://www.zyxel.com.
Select your product on the ZyXEL home page to go to that product's page.
Select the certification you wish to view from this page.
ZyXEL Limited Warranty
ZyXEL warrants to the original end user (purchaser) that this product is free from
any defects in materials or workmanship for a period of up to two years from the
date of purchase. During the warranty period, and upon proof of purchase, should
the product have indications of failure due to faulty workmanship and/or
materials, ZyXEL will, at its discretion, repair or replace the defective products or
components without charge for either parts or labor, and to whatever extent it
shall deem necessary to restore the product or components to proper operating
condition. Any replacement will consist of a new or re-manufactured functionally
equivalent product of equal or higher value, and will be solely at the discretion of
ZyXEL. This warranty shall not apply if the product has been modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions.
Note
Repair or replacement, as provided under this warranty, is the exclusive remedy of
the purchaser. This warranty is in lieu of all other warranties, express or implied,
including any implied warranty of merchantability or fitness for a particular use or
P-660HN-T1h User’s Guide
311
Appendix F Legal Information
purpose. ZyXEL shall in no event be held liable for indirect or consequential
damages of any kind to the purchaser.
To obtain the services of this warranty, contact ZyXEL's Service Center for your
Return Material Authorization number (RMA). Products must be returned Postage
Prepaid. It is recommended that the unit be insured when shipped. Any returned
products without proof of purchase or those with an out-dated warranty will be
repaired or replaced (at the discretion of ZyXEL) and the customer will be billed
for parts and labor. All repaired or replaced products will be shipped by ZyXEL to
the corresponding return address, Postage Paid. This warranty gives you specific
legal rights, and you may also have other rights that vary from country to country.
Registration
Register your product online to receive e-mail notices of firmware upgrades and
information at www.zyxel.com for global products, or at www.us.zyxel.com for
North American products.
312
P-660HN-T1h User’s Guide
Index
Index
Numerics
AP (access point) 291
802.1p 173, 174
applications, NAT 146
802.1Q/1P 163
activation 164
group settings 166
port settings 167
priority 163
PVC 164
PVID 168
tagging frames 164, 167
Asynchronous Transfer Mode, see ATM
application filter 155
ATM 229
MBS 76, 81
PCR 76, 81
QoS 76, 81, 85
SCR 76, 81
status 229
authentication 120, 122
RADIUS server 122
WPA 108
activation
802.1Q/1P 164
CWMP 202
dynamic DNS 178
DYNDNS wildcard 178
firewalls 151
MAC address filter 110
NAT 135
port forwarding 139
QoS 171, 172
SIP ALG 143
SPI 151
SSID 111
UPnP 191
wireless LAN 104
scheduling 117
WPS 113
address mapping 140
rules 142
types 141, 142, 146
administrator password 28, 206
alerts 209
alternative subnet mask notation 272
antenna
directional 304
gain 303
omni-directional 304
P-660HN-T1h User’s Guide
backup
configuration 222
Basic Service Set, See BSS 289
Basic Service Set, see BSS
broadcast 72
BSS 123, 289
example 124
CA 297
CBR 76, 81, 85
Certificate Authority
See CA.
certifications 309
notices 311
viewing 311
channel 291
interference 291
channel, wireless LAN 119
CLI 21
client list 92
313
Index
Command Line Interface, see CLI
activation 178
wildcard 177
activation 178
compatibility, WDS 115
configuration
backup 222
CWMP 202
DHCP 91
firewalls 151
IP alias 94
IP precedence 172
IP/MAC filter 157
logs 209
port forwarding 137
reset 224
restoring 223
static route 161
WAN 73
wireless LAN 103
wizard 60
connection
nailed-up 80, 84
on demand 80
copyright 309
CPE WAN Management Protocol, see CWMP
CTS (Clear to Send) 292
CTS threshold 108, 120
CWMP 201
activation 202
configuration 202
Dynamic Host Configuration Protocol, see DHCP
dynamic WEP key exchange 298
DYNDNS wildcard 177
activation 178
EAP Authentication 296
encapsulation 71, 74, 79
ENET ENCAP 82
PPPoA 82
PPPoE 82
RFC 1483 82
encryption 104, 122, 299
WEP 105
key 106
WPA 107
authentication 108
reauthentication 107
WPA-PSK 106
pre-shared key 106
ENET ENCAP 74, 79, 82
ESS 290
Extended Service Set, See ESS 290
data fragment threshold 108, 120
DDoS 150
FCC interference statement 309
default server, NAT 136, 138
filters 153
application 155
IP/MAC 156
structure 153
IP/MAC filter
configuration 157
MAC address 110, 121
activation 110
URL 153, 154
Denials of Service, see DoS
DHCP 88, 91, 96
diagnostic 227
DiffServ Code Point, see DSCP
disclaimer 309
DNS 88, 92, 96, 186
Domain Name System, see DNS
DoS 149
DSCP 172
DSL connections, status 230
firewalls 149
configuration 151
DDoS 150
DoS 149
dynamic DNS 177
314
P-660HN-T1h User’s Guide
Index
LAND attack 150
Ping of Death 150
status 35
SYN attack 149
configuration 172
IP/MAC filter 156
configuration 157
structure 153
firmware 219
version 34
forwarding ports 134, 136
activation 139
configuration 137
example 137
rules 139
fragmentation threshold 108, 120, 293
FTP 21, 183
hidden node 291
LAN 87
client list 92
DHCP 88, 91, 96
DNS 88, 92, 96
IGMP 88, 99
IP address 88, 89, 97
IP alias 93
configuration 94
MAC address 93
multicast 88, 90, 99
RIP 88, 90, 95, 98
status 34
subnet mask 88, 89, 97
LAND attack 150
LEDs 25
IANA 277
Internet Assigned Numbers Authority
see IANA
limitations
wireless LAN 123
WPS 131
IBSS 289
Local Area Network, see LAN
ICMP 187
login 27
passwords 28
IEEE 802.11g 293
IGA 144
IGMP 72, 88, 90, 99
ILA 144
logs 209
alerts 209
settings 209
Independent Basic Service Set
See IBSS 289
initialization vector (IV) 299
Inside Global Address, see IGA
Inside Local Address, see ILA
Internet Group Multicast Protocol, see IGMP
IP address 72, 74, 79, 83, 88, 97
default server 136, 138
ping 227
private 98
IP alias 93
configuration 94
NAT applications 146
IP precedence 173, 175
P-660HN-T1h User’s Guide
MAC address 93, 110
filter 102, 104, 110, 121
MAC address filter
activation 110
Management Information Base (MIB) 185
mapping address 140
rules 142
types 141, 142, 146
Maximum Burst Size, see MBS
Maximum Transmission Unit, see MTU
315
Index
MBS 76, 81, 85
MBSSID 124
MTU 76, 81
P2P 135
multicast 72, 76, 88, 90, 99
IGMPInternet Group Multicast Protocol, see
IGMP
Pairwise Master Key (PMK) 299, 301
Multiple BSS, see MBSSID
multiplexing 74, 79, 83
LLC-based 83
VC-based 83
nailed-up connection 75, 80, 84
NAT 80, 133, 134, 144, 277
activation 135
address mapping 140
rules 142
types 141, 142, 146
applications 146
IP alias 146
default server IP address 136, 138
example 145
global 144
IGA 144
ILA 144
inside 144
local 144
outside 144
P2P 135
port forwarding 134, 136
activation 139
configuration 137
example 137
rules 139
remote management 181
SIP ALG 143
activation 143
SUA 134, 135
Network Address Translation
see NAT
Network Address Translation, see NAT
passwords 28
administrator 206
PBC 126
PCR 76, 81, 84
Peak Cell Rate, see PCR
PIN, WPS 114, 115, 126
example 128
Ping of Death 150
port forwarding 134, 136
activation 139
configuration 137
example 137
rules 139
PPPoA 74, 79, 82
PPPoE 74, 79, 82
preamble 109, 120
preamble mode 293
pre-shared key 106
private IP address 98
product registration 312
PSK 299
push button 24, 115
Push Button Configuration, see PBC
push button, WPS 126
PVC 164
PVID 168
QoS 169
802.1p 173, 174
activation 171, 172
DSCP 172
example 169
IP precedence 173, 175
priority queue 175
Quality of Service, see QoS
316
P-660HN-T1h User’s Guide
Index
RADIUS 295
message types 295
messages 295
shared secret key 296
RADIUS server 122
reauthentication, WPA 107
registration
product 312
related documentation 3
remote management 179
DNS 186
FTP 183
ICMP 187
limitations 180
NAT 181
Telnet 182
WWW 181
reset 26, 224
restart 225
restoring configuration 223
RFC 1483 74, 79, 82
RIP 76, 88, 90, 95, 98
Routing Information Protocol, see RIP
RTS (Request To Send) 292
threshold 291, 292
RTS threshold 108, 120
rules, port forwarding 139
safety warnings 7
schedules
wireless LAN 117
SCR 76, 81, 85
security
wireless LAN 104, 120
IP precedenceQoS
IP precedence 172
IP/MAC filter 157
logs 209
port forwarding 137
static route 161
WAN 73
wireless LAN 103
wizard 60
shaping traffic 84, 85
Simple Network Management Protocol, see
SNMP
Single User Account, see SUA
SIP ALG 143
activation 143
SNMP 184
agents 185
Manager 185
managers 185
MIB 185
network components 185
versions 184
SPI 150
activation 151
SSID 102, 104, 112, 121
activation 111
MBSSID 124
static route 159
configuration 161
example 159
status 30, 33, 36
ATM 229
DSL connections 230
firewalls 35
firmware version 34
LAN 34
WAN 34
wireless LAN 34
WPS 114
SUA 134, 135
subnet 269
Security Parameter Index, see SPI
subnet mask 88, 97, 270
Service Set IDentifier, see SSID
subnetting 272
setup
DHCP 91
firewalls 151
IP alias 94
Sustain Cell Rate, see SCR
P-660HN-T1h User’s Guide
SYN attack 149
syntax conventions 5
system 205
317
Index
firmware 219
version 34
LED 25
passwords 28
administrator 206
reset 26
status 30, 33
firewalls 35
LAN 34
WAN 34
wireless LAN 34
time 206
tagging frames 164, 167
Telnet 182
thresholds
data fragment 108, 120
RTS/CTS 108, 120
time 206
VBR 85
VBR-nRT 76, 81, 86
VBR-RT 76, 81, 86
VCI 74, 79, 83
Virtual Channel Identifier, see VCI
Virtual Local Area Network, see VLAN
Virtual Path Identifier, see VPI
VLAN 163
802.1P priority 163
activation 164
group settings 166
port settings 167
PVC 164
PVID 168
tagging frames 164, 167
VPI 74, 79, 83
TR-069 22
trademarks 309
traffic priority 163
traffic shaping 84
example 85
UBR 76, 81, 86
unicast 72
Universal Plug and Play, see UPnP
upgrading firmware 219
UPnP 189
activation 191
cautions 190
example 192
installation 192
NAT traversal 189
URL 153
URL filter 154
URL 153
WAN 71
ATM QoS 76, 81, 85
encapsulation 71, 74, 79
IGMP 72
IP address 72, 74, 79, 83
mode 74, 79
MTU 76, 81
multicast 72, 76
multiplexing 74, 79, 83
nailed-up connection 75, 80, 84
NAT 80
RIP 76
setup 73
status 34
traffic shaping 84
example 85
VCI 74, 79, 83
VPI 74, 79, 83
warranty 311
note 311
WDS 115, 125
compatibility 115
example 125
web configurator 21, 27
login 27
318
P-660HN-T1h User’s Guide
Index
passwords 28
WEP 105, 123
key 106
Wide Area Network, see WAN
Wi-Fi Protected Access 298
WiFi Protected Setup, see WPS
wireless client WPA supplicants 300
Wireless Distribution System, see WDS
wireless LAN 101, 118
activation 104
authentication 120, 122
BSS 123
example 124
channel 119
configuration 103
encryption 104, 122
example 118
fragmentation threshold 108, 120
limitations 123
MAC address filter 102, 104, 110, 121
MBSSID 124
preamble 109, 120
RADIUS server 122
RTS/CTS threshold 108, 120
scheduling 117
security 120
SSID 102, 104, 112, 121
activation 111
status 34
WDS 115, 125
compatibility 115
example 125
WEP 105, 123
key 106
wizard 66
WPA 107, 123
authentication 108
reauthentication 107
WPA-PSK 106, 123
pre-shared key 106
WPS 113, 125, 128
activation 113
adding stations 115
example 130
limitations 131
PIN 114, 115, 126
push button 24, 115, 126
status 114
P-660HN-T1h User’s Guide
wireless security 294
Wireless tutorial 39
wizard 57
configuration 60
wireless LAN 66
WLAN
interference 291
security parameters 302
WPA 107, 123, 298
authentication 108
key caching 300
pre-authentication 300
reauthentication 107
user authentication 300
vs WPA-PSK 299
wireless client supplicant 300
with RADIUS application example 300
WPA2 298
user authentication 300
vs WPA2-PSK 299
wireless client supplicant 300
with RADIUS application example 300
WPA2-Pre-Shared Key 298
WPA2-PSK 298, 299
application example 301
WPA-PSK 106, 123, 299
application example 301
pre-shared key 106
WPS 113, 125, 128
activation 113
adding stations 115
example 130
limitations 131
PIN 114, 115, 126
example 128
push button 24, 115, 126
status 114
319
Index
320
P-660HN-T1h User’s Guide
Index
P-660HN-T1h User’s Guide
321
Index
322
P-660HN-T1h User’s Guide

Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 13774
Create Date                     : 2010:08:16 13:18:02+08:00
Creator                         : FrameMaker 7.1
Modify Date                     : 2010:08:23 19:55:34+02:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Title                           : ZyBook2.book
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2010:08:23 19:55:34+02:00
Document ID                     : uuid:0e2cb63a-0f37-47ce-8884-95e50a845065
Instance ID                     : uuid:2fde1e85-5536-419c-b1d1-79d34b93d36f
Format                          : application/pdf
Page Count                      : 322


EXIF Metadata provided by EXIF.tools

FCC ID Filing: I88P660HNT1H

 






Navigation menu