ZyXEL Communications PK5000Z 802.11g Wireless ADSL 2+ 4-port Gateway User Manual PK5000Z QSG

Download:
Mirror Download [FCC.gov]
Document ID	1226181
Application ID	9KSe8748jaFgD0RuAUOavg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.25kB (265665 bits)
Date Submitted	2010-01-12 00:00:00
Date Available	2010-01-12 00:00:00
Creation Date	2009-12-31 05:48:30
Producing Software	doPDF Ver 6.1 Build 269 (Windows XP x32)
Document Lastmod	2010-01-04 11:27:41
Document Title	Microsoft Word - PK5000Z QSG
Document Creator	Microsoft Word - PK5000Z QSG
Document Author:	w00923

PK5000Z
802.11g W ireless ADSL2+ 4-port Gateway
Quick Start Guide
Version 3.40
12/2009
Edition 1
PK5000Z Quick Start Guide
Overview
The PK5000Z is a wireless ADSL router with a four-port built-in switch.
This Quick Start Guide shows you how to use the PK5000Z to connect to the Internet and how to
configure the device settings to connect wirelessly.
See your User’s Guide for background information on all features.
Quick Login Information
LAN IP address
http://192.168.0.1
default administrator password 1234
PK5000Z Quick Start Guide
1 Hardware Connections
1 DSL: Use the gray telephone wire to connect your PK5000Z’s DSL port to a telephone jack (or to
the modem port on a splitter if you are using one).
2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET port for
initial configuration and/or Internet access.
3 POWER: Use the included power adaptor to connect an appropriate power source to the POWER socket.
Make sure the power source is on.
4 Push in the POWER button.
5 Look at the lights on the front panel.
• The POWER light blinks while your PK5000Z starts up and stays on once it is ready.
• Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected and blinks
when there is traffic.
• The DSL light is on when the PK5000Z has a DSL connection.
• The INTERNET light is on when you are able to access the Internet and blinks when the PK5000Z
is sending or receiving data. Wait a couple of minutes while your device checks the connection.
If any of these lights are not on, check your connections and inspect your cables for damage. If the lights
are still off, contact your local vendor.
2 Internet Connection Setup: Automatic
Use this section to have your PK5000Z automatically detect and set up your Internet connection.
1 Open your web browser to a website. Wait while your PK5000Z tries to detect your DSL connection to your
ISP. This may take a few minutes.
2 After it detects the connection, the DSL light shows green on your device and the Internet light comes on
when the Internet is ready for you to use. If you have a PPPoE connection, you will have to enter your
user name and password.
3 Go to section 3 if you wish to configure your wireless settings.
4 If you do not see the connection test screen, or the connection test is not successful, follow the
instructions in the screen below, or check your connections and restart the PK5000Z. If you still cannot
access the Internet, follow the steps in section 3.
3 Configuring your Wireless Settings
To create a wireless network, the PK5000Z and your wireless computer must all use the same SSID
(network name), channel and security settings.
If you do not set wireless security then anyone within range could use your PK5000Z to access your
network and the Internet.
Choose WPA-PSK wireless security if your wireless device supports it as it is stronger than WEP. Otherwise
choose WEP.
PK5000Z Quick Start Guide
1 Select Active and click Next to continue. It is strongly recommended that Enable OTIST is NOT selected.
See section 7 for more information.
2 Configure your wireless settings in the screen. Click Next.
3) If you select either WEP or WPA-PSK security (recommended), then follow the directions to enter
the appropriate key. Click Next to continue and Apply to save your wireless LAN settings.
4 Check your configuration and write down your wireless LAN settings for later use. Click Finish to complete and
save the wizard setup.
5 Your Internet is ready for you to use. Open your browser and navigate to your favorite website.
4 Internet Connection Setup Using Advanced Settings
Use this section to set up your Internet connection manually if you do not see the ISP Parameters for Internet
Access screen when you run the wizard (see section 4, step 4).
1 Login again. (Follow steps 1 to 5 in section 3.)
2 Select Go to Advanced setup. Then, click Apply.
3 The Status screen appears. Click Network > WAN in the navigation panel on the left of the screen.
4 Enter the information exactly as provided by your ISP. Click Apply.
5 If you still cannot access the Internet, see Troubleshooting and/or contact your Internet Service Provider
(ISP) for assistance.
PK5000Z Quick Start Guide
Troubleshooting
1 If you cannot access the web configurator,
• Your computer may be set to use a static IP address in a different subnet from the ZyXEL device. See the
appendix in the User’s Guide for information on setting up your IP address.
• If you are using Internet Explorer in Windows XP or Windows Server 2003, make sure you allow pop-up
windows, JavaScripts and Java permissions or set the Internet security level lower than High in Internet
Explorer (in Internet Explorer, click Tools > Internet Options > Security > Custom Level...). See the
appendix in the User’s Guide for more information.
2 If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these
steps.
A) Check the lights on the front panel. If they are different from what is described in section 1, make sure
the PK5000Z is correctly connected. (See section 1.) If the lights are still different, turn off the device,
wait a few seconds, and turn it on again.
B) Check you have correctly entered the informatinon your ISP gave you. For example, if your account has
a user name and password, make sure you type it correctly. In addition, if you are not sure which
encapsulation your ISP uses, contact your ISP. If your ISP did not give you Internet connection
information, follow the steps in section 2.
C) If you are using a new Internet account, contact your ISP to make sure it is active.
D) If you still have problems, see Troubleshooting in the User’s Guide.
If you cannot access the Internet after you take the steps above, either try the following or contact your ISP:
E) Turn your PK5000Z off and on. Open your Internet browser if it is not already open.
Let the PK5000Z complete the DSL connection test (this may take several minutes). See section 2 for
details.
If the test is successful, check whether you can access the Internet.
F) If the test is unsuccessful or if you cannot access the Internet, log in to the PK5000Z’s web
configurator (see section 3).
• Click Network > WAN > Internet Connection. Ensure that the settings in this screen are the same as
those your ISP gave you. If your ISP gave you a static IP address to use, select Static IP Address in
the IP Address section and enter it in the IP Address field. If not, select Obtain an IP Address Automatically. Click Apply.
• Click the wizard icon (
access the Internet.
). Run the Internet/Wireless Setup wizard again. Check whether you can
If you still cannot access the Internet, take the following steps:
• If you are using Bridge mode (check Mode in the Network > WAN > Internet Connection screen) click
NAT > General and ensure Active Network Address Translation (NAT) is not selected. Click LAN >
DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP address
directly. If you want to access the PK5000Z again, you need to use a static IP address in the sam e
subnet as your PK5000Z (the PK5000Z’s default IP address is http://192.168.0.1).
• Click the wizard icon (
). Run the Internet/Wireless Setup wizard again. Check whether you can
access the Internet.
If you still cannot access the Internet, contact your Internet Service Provider.
PK5000Z Quick Start Guide
3 If you cannot access the Internet using the wireless network, follow these steps.
A) On a computer in the wireless network, open your browser, and go to http://192.168.0.1. If you see the
login screen in section 3, follow suggestions A - F above. If you do not, go to the next step.
B) On a computer connected to the PK5000Z, make sure your PK5000Z and the computers on your
wireless network are using the same wireless and wireless security settings. See the chapter on
Wireless LAN in the User’s Guide for more information.
Viewing Your Product’s Certifications
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.
3 Select the certification you wish to view from this page.
Customer Information Statement
The information informing the user of his/her and the telephone company's rights and obligations is outlined
on the following pages. This information will be included in the final version of the manual.
Customer Information
1 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
bottom of this equipment is a label that contains, among other information, a product identifier of QWEST
Z9. If requested, this number must be provided to the telephone company.
2 If this equipment DL causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical,
the telephone company will notify the customer as soon as possible. Also you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
3 The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make necessary modification to maintain uninterrupted service.
4 If you experience trouble with this equipment, you disconnect it from the network until the problem has
been corrected or until you are sure that the equipment is not malfunctioning.
5 Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate
or repair any parts of device except specified.
6 Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
7 If the telephone company requests information on what equipment is connected to their lines, inform them
of:
a The ringer equivalence number is 02
b) The USOC jack required RJ14, and
c) The FCC Registration Number US: 1RODL02BP660RD1V2
Item (a) and (c) are indicated on the label. The ringer equivalence number (REN) is used to determine how
many devices can be connected to your telephone line. In most areas, the sum of the RENs of all devices on
anyonelineshouldnotexceedfive(5.0).Iftoomanydevicesareattached,theymaynotringproperly.
PK5000Z Quick Start Guide
8 If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
of this equipment does not disable alarm equipment, consult your telephone company or a qualified
installer.
Service Requirements
In the event of equipment malfunction, all repairs should be performed by our Company or an authorized
agent. It is the responsibility of users requiring service to report the need for service to our Company or to one
of our authorized agents.
Service can be facilitated through our office at:
ZyXEL Communications Corporation
6, Innovation Rd II, Science-Based Industrial Park, Hsin-Chu, Taiwan, R.O.C.
+886- 3-578-3942
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
For a Class B digital device or peripheral, the instructions furnished the user shall
include the following or similar statement, placed in a prominent location in the text of
the manual:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
(c) The provisions of paragraphs (a) and (b) do not apply to digital devices exempted
from the technical standards under the provisions of Section 15.103.
(d) For systems incorporating several digital devices, the statement shown in
paragraph (a) or (b) needs to be contained only in the instruction manual for the main
control unit.
(e) In cases where the manual is provided only in a form other than paper, such as on
a computer disk or over the Internet, the information required by this section may be
included in the manual in that alternative form, provided the user can reasonably be
expected to have the capability to access information in that form.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-701
Create Date                     : 2009:12:31 05:48:30Z
Creator Tool                    : Microsoft Word - PK5000Z QSG
Modify Date                     : 2010:01:04 11:27:41+08:00
Metadata Date                   : 2010:01:04 11:27:41+08:00
Format                          : application/pdf
Creator                         : w00923
Title                           : Microsoft Word - PK5000Z QSG
Producer                        : doPDF   Ver 6.1 Build 269 (Windows XP  x32)
Document ID                     : uuid:ca81725f-97db-4037-8c20-49ae15e081dd
Instance ID                     : uuid:18748935-b54d-4efe-b486-a83be8965bca
Page Count                      : 8
Page Layout                     : OneColumn
Author                          : w00923

EXIF Metadata provided by EXIF.tools